D Link SL2750ET1 Wireless N 300 ADSL2+ Modem Router User Manual
D Link Corporation Wireless N 300 ADSL2+ Modem Router
D Link >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2449361 |
| Application ID | kLqg74JFA7d5VpLfsZkMSA== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 437.5kB (5468769 bits) |
| Date Submitted | 2014-11-19 00:00:00 |
| Date Available | 2014-11-19 00:00:00 |
| Creation Date | 2014-09-18 17:45:22 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2014-11-18 15:29:33 |
| Document Title | USER MANUAL |
| Document Creator | Acrobat PDFMaker 11 Word 版 |
| Document Author: | Paisan Tongcharoenskul |
USER MANUAL Router: D-Link DSL-2750E Table of Contents Overview Packing List D-Link DSL-2750E Overview Start with D-Link DSL-2750E Connecting D-Link DSL-2750E configuring Wireless Security Using WPS 16 Troubleshooting 17 Safety Concerns 26 FAQs 28 Tachnical Specification 31 Router: D-Link DSL-2750E Quick Start Thank you for purchasing Router: D-Link DSL-2750E With the D-Link DSL-2750E, you can access the Internet at a high speed while making a phone call. If there is a need to configure the device in your application, please ask for necessary information and guidance from your ISP Overview The following summarizes useful information to install D-Link DSL-2750E. Packing List D-Link DSL-2750E Overview Preparation Connecting D-Link DSL-2750E Quick Troubleshooting Safety Concerns FAQs (Frequently Ask Questions) Tachnical Specifications Packing List Open the packet delivered to you with care. Make sure that you have the following items. One D-Link DSL-2750E One Splitter Two Micro Fillter One Power Adapter Two Telephone Cable One ETHERNET Cale Quick Guide D-Link DSL-2750E D-Link DSL-2750E gives full consideration to the household arrangements, enabling horizontal or hanging on the wall. Picture below shows how it stands on your table. Figure 1-1 D-Link DSL-2750E Router Profile Figure 1-2 D-Link DSL-2750E Router Front panel Figure 1-3 D-Link DSL-2750E Router Real panel The LED Indicators as below; Table 1-1 LED Indicators Indicator POWER Color Status Green Off The power is off. On The power is on and the initialization is normal. On The device is initialing. Blinks The firmware is upgrading. Off No LAN link. Blinks Data is being transmitted through the LAN interface On The connection of LAN interface is normal. On The Connection of WLAN interface is normal. Blinks Data is transmitted through the WLAN interface. Off The WLAN connection is not established. Blinks WPS negotiation and enabled on the device. Off WPS negotiation is not enabled on the device. Red ETHERNET 1-4 Green WLAN Green WPS Blue Description Indicator USB DSL Internet Color Status Green On The connection of USB flash disk has been established. Blinking Data is being transmitted. Off The connection of USB flash disk is not established. On On Initial self-test of the unit has passed and is ready Blinks The device is detecting itself. Off Initial self-test is failed. Off The device is under the Bridge mode, DSL connection is not present. Blinks Internet data is being transmitted in the routing mode. On The IP is connected. On The device is attempted to become IP connected, but failed. Green Green Red Description Start With D-LINK DSL-2750E Splitter Using Splitter can reduce disturbance signals in the telephone line. D-Link DSL2750E needs to use a separate splitter. The External has three ports. LINE: Connecting to the phone jack. PHONE: Connecting to the telephone sets. DSL: Connecting to the D-Link DSL-2750E. Remark: Figure 1-4 Computer to D-Link DSL-2750E Page 9 ETHERNET Card Computer is connected to D-Link DSL-2750E through the ETHERNET port on D-Link DSL-2750E. Ensure your computer is configured with ETHERNET Adapter as well as ETHERNET port. Besides, make sure you enabled the TCP/IP for your operating system. Connecting D-Link DSL-2750E (1) Place D-Link DSL-2750E in a safe and accessible location Keep the device away from heat source, power line or highly powered electronic equipment where you can easily view the LED indicator on the front panel of the device. If you want to connect one or more telephones, Micro Filter is needed; It will work between telephones and the line from phone jack. For more details about connecting multiple telephones, please refer to the FAQs You are now ready to connect D-Link DSL-2750E. Follow these steps; 1. Connect the ADSL Line – Plug one end of the telephone cable into the Line port of splitter and insert the other end into the phone jack. Use another phone cable to connect the DSL port of the splitter and the DSL port on the rear panel of Router. Use Telephone set connect to PHONE port of the splitter 2. Connect the power adapter – Connect the power adapter to D-Link DSL2750E and the mail supply. Power on the switch. The Power LED indicator will turn on. 3. Connect D-Link DSL-2750E to your computer – Use the ETHERNET cable to connect D-Link DSL-2750E and your computer When the ETHERNET LED of D-Link DSL-2750E is ON, it indicates the connection between D-Link DSL-2750E and your PC. Figure 1-4 Computer to D-Link DSL-2750E Ensure that the LAN cable connecting the LAN to D-Link DSL-2750E must not exceed 100 meters or less *** Depend on quality of telephone cable and noise If you want to connect PC via Wireless LAN. You can use default SSID and WiFi key can get from Label Sticker on your D-Link DSL-2750E as follow. Exam: SSID : true_homewifi_6JU and key is “0081Z225”. Both of SSID and WiFi key is a unique value associated with D-Link DSL-2750E řşŞ SSID (Name of WiFi) : true_homewifi_6JU Key (Password for use WiFi): 0081Z225 Router Username/Password (User/Password for device’s login) : admin/password You can configure to Internet Connection by 2 ways are Web Browser and hispeed assistant program. Please do as follows. Config by Web Configuration (Wizard) 1. Open your web browser or Internet Explorer. Type “řšŚřŞŠřř” click ‘Enter’. See at Figure ř-ŝ Figure 1-5 Browser 2. Web page will pop up Password insert. See at Figure 1-6 User : “admin” Password : “password” Click “Login” Figure 1-6 Username / Password Login 10 Web page will show the status of device. See at Figure ř-ş Figure 1-7 Device Status 3. Click “Status” > “ADSL Driver” for check on internet description, If internet synchronization that can done, Device will show sync description like on Figure ř-Š Figure ř-Š WAN Description 11 4. Start device configuration by wizard, Click “Setup” > “Wizard” as figure 1-9 Figure 1-9 Wizard Configuration Figure 1-10 Wizard Configuration (Cont.) Figure 1-11 User / Password Login Configuration 12 Figure 1-12 Date –Time Configuration Figure 1-13 Internet Configuration 13 5. Under Page “Internet Configuration”, use the default factory setting and click ‘Next’. Figure 1-14 Internet Configuration 6. The default SSID and WiFi Key are on the top of router. You can change the default wireless SSID and wireless security to your preferred value. SSID (ºÉ°´µWiFi) : true_homewifi_6JU Key (¦®´nµÎµ®¦´µ¦ÄoµWiFi): 0081Z225 Router Username/Password (¦®´nµÎµ®¦´Á µo ´Ê nµ°»¦r) : admin/password 14 Figure 1-15 Wireless Configuration Figure 1-16 Summarize of Configuration Remark : • You may get more information on how to connect TRUE Hi-Speed Internet from this link: http://support.trueinternet.co.th/cpe In case of installation or connection problem, contact us at 1686 or e-mail support@truecorp.co.th 15 Configuring Wireless Security Using WPS There are two WPS methods for creating a secure connection. Push Button Configuration (PBC) : create a secure wireless network simply by pressing a button PIN Configuration : create a secure wireless network simply by entering a wireless client’s PIN(Personal Identification Number) Push button Configuration(PBC) 1. Make sure that your DSL-2750E is turned on and that it is within range of your computer and Wireless LAN Security Mode is No Security or WPAPSK or WPA2-PSK. 2. Make sure that you have installed the wireless clients driver and utility in your notebook. 3. In the wireless client utility, find the WPS setting. Enable WPS and press the WPS button. 4. Go to WPS Station Page and press the Push Button or Press WPS/WLAN button 5-10 sec. 5. Press WPS button on your Wireless client within 2 minutes. PIN Configuration When you use the PIN configuration method, you need to use both DSL-2750E configuration interface and the client’s utilities. 16 1. Login in to DSL-2750E then go to Menu Advance > Advance Wireless > WPS to get PIN a Number. Figure 1-17 ®oµnµ¦´ÂnWPS 2. Launch your wireless client’s configuration utility. Go to the WPS setting and Enter the PIN number. Troubleshooting 1. The Power indicator is off, what can I do? You’d better check as follows. (1) Whether the power adapter is suitable for the D-Link DSL-2750E. (2) Whether the D-Link DSL-2750E is connected to the power supply correctly. (3) Whether the ON/OFF button is clicked down. 2. The ETHERNET link indicator is off, what can I do? 17 For Windows XP, You’d better check as follows. (1) Whether the provided ETHERNET cable between the D-Link DSL-2750E and the computer is in the correct type. (2) Whether the ETHERNET card works normally. For Windows XP, Select Start > Setting > Control Panel > System > Hardware > Device Manager. For Windows 7, Select Start > Control Panel > System & Security > Device manager Check whether there are devices that have the “?” Or “!” Mark under Network adapters. If such devices exist, uninstall and then re-install them. See at Figure 1-18 18 Windows XP 19 Windows 7 Figure 1-18 ETHERNET Card Status of Windows XP and Windows 7 If the problem remains, change the slot for the network card. *** It should be performed by specialist. Change another ETHERNET cable 3. The WLAN indicator is off, what can I do? You’d better check as follows. (1) Check whether there is D-Link DSL-2750E activates Wireless LAN. You can check at Menu Setup > Wireless Setup > Wireless Basics on GUI of D-Link DSL-2750E. See at Figure 1-19 20 Figure 1-19 Enable Wireless LAN 4. The DSL link indicator is off. What can I do? You’d better check as follows. (1) Whether that the telephone line is correctly connected with the splitter. (Figure 1-4, page 9) (2) Whether the telephone line works normally by using a telephone to make a test. (3) Whether the telephone line is reliable 5. The Internet link indicator is off, what can I do? You’d better check as follows. (1) Whether that the telephone line is correctly connected with the splitter. (2) Whether the DSL link indicator is On. 21 Warning Page Warning page will show when router find some problem that may affect the usage. This will help user to understand the problem and how to fix it. Figure 1-20 Warning page show when ADSL light turn off or blinking. Figure 1-21 Warning page show when can’t connect to internet. 22 Figure 1-22 Warning page show the connection problem between computer and router modem. Figure 1-23 Warning page show when wireless disconnect many times. 23 Figure 1-24 Warning page show when wireless signal is weak If you wish to enable/disable warning page function, you may access to menu Advance > Network Tools > Self Trouble shooting • Enable = Enable Self Trouble Shooting page • Disable = Disable Self Trouble Shooting page 24 Figure ř-25 The page to enable/disable Self Trouble Shooting page Helping tools when your computer has wrong configuration (Self-Heal). This feature use for help user for any wrong network configuration on computer that after config, router can allow user to surf internet such as wrong IP Address, wrong DNS that include wrong proxy configuration. If you want enable/disable this feature can access follow menu Advanced > Network Tools > IPnP 25 Figure ř-26 The page to access Self Heal page Safety Concerns Pay attention to the following when installing and using the D-Link DSL-2750E Place the device at a wellventilated place. Do not dispose the device to direct sunlight. Never attempt to dismantle the device by yourself. In case of any fault, contact the appointed maintenance center for repair. During storage, transportation and operation of the device, keep the device dry. Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils. Do not use an old or a damaged power cable. 26 Do not let a child operate the device without guidance. Do not let a child play with the device or any accessory. Swallowing the accessories may lead to peril. In any of the following cases, stop using the device, disconnect it from the power supply and unplug the power plug immediately: there is smoke emitted from the device, or there is some abnormal noise or smell. Contact the specified maintenance center for repair. Keep at least 10 cm. between the device and the closest object for heat dissipation. Keep the device for away from any heat source or bare fire, such as a candle or an electric heater. Do not place any object on top of the device. Otherwise, the device may be too hot during operation. It can even be deformed or damaged by the heavy load. Before cleaning the device, stop using it and disconnect it from the power supply. Use a piece of soft cloth to clean the device. Before plugging or unplugging any cable, shut down the device and disconnect it from power supply. 27 Unplug your router during thunder storm. This will protect your router from damage due to power surges. Note: What D-Link DSL-2750E is used for a long time, temperature of the shell will rise slightly. This is normal and does not affect the performance of the device. FAQs 1. Why does the ADSL CPE fall off line so often? There are many factors concerned, such as telephone or fax machine is connected directly to the ADSL subscriber line without splitter, faults in your ISP access server or ADSL CPE (Compatibility or quality problem), ETHERNET card (Low processing speed, invalid driver), line disconnection, line disturbance, etc. You are suggested to check the following items in your applicable range. (1) Ensure no telephone or fax machine is connected directly to the ADSL subscriber line without splitter. (2) Ensure the ADSL connector is valid. (3) Keep the device away from heat source, power line or highly powered electronic equipment. (4) Telephone Line NOT have any Noise 2. How to connect multiple telephones? 28 In case you need to connect telephone more than one set. You must install Micro Filter for every branch of Telephone. Micro filter is available at True Shops. Figure 1-20 Multiple Telephones connection 3. What are the advantages compared with ordinary dial-up equipment? High data rate. Through Voice and data traffic are carried through a single line, the circuit switch does not process data traffic. That is, you don’t need to pay extra telephone fee for accessing the Internet. 4. Is there any possibility of losing voice quality by using ADSL CEP or threatening data rate by calling simultaneously? FDM technology is used here to separate the voice and data traffic, which are 29 totally independent to each other with standard frequency design. Even you make phone call while accessing the Internet, it will not cause the losing of voice quality or data rate. 5. Why can not I access the Internet? (1) Ensure that you have entered the correct username and password. (2) If you still cannot access the Internet, check whether the Proxy server on your IE is correctly configured. The Proxy server must be disabled. (3) Try different Websites, in case some Website fails. Try to Power Off and Power On D-Link DSL-2750E then access Internet again. 6. I cannot get online for I changed the parameters of the D-Link DSL-2750E, What can I do? Try to restore the default factory setting of the D-Link DSL-2750E as follows. (1) Find the Reset button on the bottom of the D-Link DSL-2750E. Use a needle-like object to click and hold the Reset button 10 second, and then release it. (2) Default Configure and entered the correct username and password again 30 Technical Specification General Specification Standard Data transfer rate ADSL Standard ITU-T G.992.1 G.dmt ITU G.992.2 G.lite ANSI T1.413 Issue 2 ADSL2 Standard ITU G.992.3 G.dmt.bis ITU G.992.4 G.lite.bis ADSL2+ Standard ITU G.992.5 ADSL2+ G.dmt G.lite T1.413 ADSL2+ Annex M ADSL2 The maximum downstream rate is 8 Mbit/s The maximum upstream rate is 896 Kbit/s The maximum downstream rate is 1.5 Mbit/s The maximum upstream rate is 512 Kbit/s The maximum downstream rate is 8 Mbit/s The maximum upstream rate is Kbit/s The maximum downstream rate is 24 Mbit/s The maximum upstream rate is 896 Kbit/s The maximum upstream rate is 3 Mbit/s The maximum downstream rate is 12 Mbit/s The maximum upstream rate is 896 Kbit/s The maximum upstream rate is 3 Mbit/s 31 Physical and Environmental Specification Power consumption 10 W Power Adapter Output: 12 VDC 1 A Environment Temperature 0ɗ ȸ 40ɗ (32ə ȸ 104ə) Environment Humidity 10% – 95% Dimensions 240 x 160 x 68 mm Weight 290 g 32
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : 3.1-701 Modify Date : 2014:11:18 15:29:33+08:00 Create Date : 2014:09:18 17:45:22+08:00 Metadata Date : 2014:11:18 15:29:33+08:00 Creator Tool : Acrobat PDFMaker 11 Word 版 Document ID : uuid:73832f4e-3a40-4649-ac63-4de80bd3ee84 Instance ID : uuid:571b5df0-ce5e-4aef-9705-6163f989d1ef Subject : 7 Format : application/pdf Title : USER MANUAL Description : Creator : Paisan Tongcharoenskul Producer : Acrobat Distiller 11.0 (Windows) Keywords : Source Modified : D:20140911022407 Company : ZyXEL Thailand Co.,Ltd. Has XFA : No Page Count : 34 Author : Paisan TongcharoenskulEXIF Metadata provided by EXIF.tools