D Link SL2885AA1 Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router User Manual rev 2

Download:
Mirror Download [FCC.gov]
Document ID	2949116
Application ID	nxhNZ/DCP6MDj5fx2Md6mw==
Document Description	User Manual rev 2.pdf
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	146.7kB (1833803 bits)
Date Submitted	2016-04-01 00:00:00
Date Available	2016-04-01 00:00:00
Creation Date	2016-03-31 10:52:42
Producing Software	Acrobat Distiller 8.1.0 (Windows)
Document Lastmod	2016-03-31 10:53:22
Document Title	User Manual rev 2.pdf
Document Creator	Adobe InDesign CS6 (Windows)
Document Author:	amawu

Version 1.00 |
User Manual
Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2
Modem Router
DSL-2885A
Preface
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes.
Manual Revisions
Revision
Date
Description
1.00
November 26, 2015
Initial release
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries.
All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries.
App StoreSM is a service mark of Apple Inc.
Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.
Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2015 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.
Power Usage
ErP Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network
Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not
needed.
Network Standby: TBA watts
Switched Off: TBA watts
D-Link DSL-2885A User Manual
Table of Contents
Table of Contents
Preface ................................................................................. i
Product Overview .............................................................. 1
Package Contents ......................................................................... 1
System Requirements ................................................................. 2
Introduction ................................................................................... 3
Features............................................................................................ 4
Antenna Setup............................................................................... 5
Hardware Overview ..................................................................... 6
Back Panel ............................................................................... 6
Side Panel ................................................................................ 7
LEDs ........................................................................................... 8
Installation ......................................................................... 9
Before you Begin........................................................................... 9
Wireless Installation Considerations ....................................10
Manual Setup ...............................................................................11
Getting Started ................................................................14
Setup Wizard ................................................................................15
...................................................................23
Home ..............................................................................................24
Internet ...................................................................................24
DSL-2885A .............................................................................25
Connected Clients ..............................................................26
USB Device ............................................................................28
Settings ..........................................................................................29
D-Link DSL-2885A User Manual
Wizard .....................................................................................29
Internet ...................................................................................29
IPv4 .....................................................................................31
DSL ......................................................................................40
ATM .....................................................................................41
PTM .....................................................................................42
IPv6 .....................................................................................43
Wireless ..................................................................................57
Guest Zone .......................................................................59
Network..................................................................................60
SharePort ...............................................................................62
Create User .......................................................................63
Features..........................................................................................65
QoS Engine............................................................................65
Firewall Settings ..................................................................66
IPv4/IPv6 Rules ...............................................................68
Port Forwarding ..................................................................69
Virtual Server ...................................................................70
Website Filter........................................................................71
Static Routes .........................................................................72
IPv6 .....................................................................................73
Dynamic DNS .......................................................................74
IPv6 Host ...........................................................................75
Management................................................................................76
Time & Schedule .................................................................76
ii
Table of Contents
Time ....................................................................................76
Schedule ...........................................................................77
System Log ............................................................................78
Admin .....................................................................................79
System ...............................................................................81
Upgrade .................................................................................82
Statistics .................................................................................83
Wireless Security ......................................................... 111
What is WPA? ................................................................ 111
Technical Specifications ................................................112
Connect a Wireless Client to your Router ......................84
WPS Button ...................................................................................84
Windows® 8...................................................................................85
WPA/WPA2 ............................................................................85
Windows® 7...................................................................................87
WPA/WPA2 ............................................................................87
WPS ..........................................................................................90
Windows Vista®............................................................................94
WPA/WPA2 ............................................................................95
Windows® XP ................................................................................97
WPA/WPA2 ............................................................................98
Troubleshooting ............................................................100
Wireless Basics ...............................................................104
What is Wireless? ...................................................................... 105
Tips................................................................................................ 107
Wireless Modes......................................................................... 108
Networking Basics .........................................................109
Check your IP address ............................................................ 109
Statically Assign an IP address ............................................ 110
D-Link DSL-2885A User Manual
iii
Section 1 - Product Overview
Product
PackageOverview
Contents
Wireless AC1200 Dual-Band Gigabit
ADSL2+/VDSL2 Modem Router (DSL-2885A)
Power Adapter
Ethernet Cable
DSL Microfilter/Splitter
Phone Cable
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage rating than the one included with the DSL-2885A will cause damage and void the
warranty for this product.
D-Link DSL-2885A User Manual
Section 1 - Product Overview
System Requirements
Network Requirements
Web-based Configuration
Utility Requirements
• An active account with an Internet Service Provider using one of the
following connection types:
• A VDSL/ADSL connection to a telephone line using the DSL port
• A broadband device connected using the WAN port
• A mobile broadband 3G/4G/LTE connection using a USB modem
• 802.11ac, n, g, b, or a wireless or Ethernet port
Computer with the following:
• Windows®, Macintosh, or Linux-based operating system
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer 10 or higher
• EDGE Browser (v20 and above)
• Firefox 11 or higher
• Safari 5 or higher
• Chrome 17 or higher
Windows® Users: Make sure you have the latest version of Java installed. Visit
www.java.com to download the latest version.
D-Link DSL-2885A User Manual
Section 1 - Product Overview
Introduction
The D-Link DSL-2885A Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router shares your DSL Internet connection
over a blazing-fast Wireless AC connection using advanced AC beamforming technology to maximize the speed and range of
your wireless signal to significantly outperform 802.11n and other 802.11ac devices. It also comes equipped with four Gigabit
ports to provide speeds up to 10x faster than standard 10/100 ports. With the addition of Advanced Quality of Service (QoS),
data streams are separated, which helps organize and prioritize your network traffic so your video streaming, gaming, and VoIP
calls run smoother over both your wired and wireless network.
SharePort technology lets you take advantage of the USB 2.0 porst found on the back and side of your DSL-2885A (as well as an
additional USB 2.0 port). Plug in a USB storage drive and you can access files, stream videos, view photos, or listen to music on
your laptop or mobile devices.
The DSL-2885A Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router provides incredible speeds, smart antenna
technology, fast ports, cloud features, and terrific security features. It also features an innovative design and easy installation
options.
D-Link DSL-2885A User Manual
Section 1 - Product Overview
Features
• Faster Wireless Networking - The DSL-2885A introduces Smart Connect, a new D-Link feature which when
combined with an additional 5 Ghz antenna can provide up to a full 1200 Mbps* wireless connection with
concurrent 801.11ac and 802.11n wireless clients . It also operates on both the 2.4 GHz and 5 GHz bands to
allow separation of traffic so users can participate in high-bandwidth activities, such as video streaming, online
gaming, and real-time audio, without affecting low-priority traffic like email and web surfing.
• Compatible with 802.11n/g/b/a Devices - The DSL-2885A is still fully compatible with the 802.11n, IEEE
802.11g and 802.11a standards, so it can connect with existing 802.11n, 802.11g, 802.11b, and 802.11a wireless
devices.
• Advanced Firewall Features - The web-based user interface displays a number of advanced network
management features including:
• Content Filtering - Easily applied content filtering based on MAC address, URL, and/or domain
name.
• Scheduling - The Firewall, wireless, and port forwarding features can be scheduled to be active on
certain days, or for a duration of a set number of hours.
• Secure Multiple/Concurrent Sessions - The DSL-2885A can pass through VPN sessions. It supports
multiple and concurrent IPSec and PPTP sessions, so users behind the DSL-2885A can securely
access corporate networks.
• User-friendly Setup Wizard - Through its easy-to-use web-based user interface, the DSL-2885A lets you control
what information is accessible to those on the wireless network, whether from the Internet, or from your
company’s server. Configure your router to your specific settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac specifications. Actual data throughput will vary. Network conditions
and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely affect wireless signal range.
D-Link DSL-2885A User Manual
Section 1 - Product Overview
Hardware Overview
Back Panel
DSL Port
Connect to an DSL-enabled telephone line and with the supplied microfilter/splitter.
Gigabit LAN Ports (1-4) Connect Ethernet devices such as computers, switches, storage (NAS) devices and game consoles.
Gigabit WAN Port
Connect broadband Ethernet WAN devices.
USB 2.0 Port
Connect a USB flash drive to share content , or connect it to a USB printer to share it on your network.
Reset Button
Insert a paperclip in the hole and wait for several seconds to reset the router to default settings.
Power Connector
Power Button
D-Link DSL-2885A User Manual
Connector for the supplied power adapter.
Press the power button to power on and off.
Section 1 - Product Overview
Side Panel
USB 2.0 Port
Connect a USB flash drive to share content , or connect it to a USB printer to share it on your network.
WPS Button
Press to start the WPS process and automatically create a secure connection to a WPS client.
Wi-Fi Button
Press and hold for 2 seconds to enable or disable Wi-Fi.
D-Link DSL-2885A User Manual
Section 1 - Product Overview
Hardware Overview
LEDs
Solid Green
Solid Red
Power
WAN
LAN Ports 1-4
Wireless 2.4/5G
WPS
USB 1-2
DSL
Internet
D-Link DSL-2885A User Manual
A solid green light indicates a proper connection to the power supply.
A solid red light indicates a the device is booting or an error has occurred.
Blinking Green A blinking green light indicates that backup mode is active.
A blinking red light indicates that the device is resetting to factory defaults or the
Blinking Red
firmware is being updated.
Solid Blue
A solid blue light indicates a WAN Port connection.
Blinking Blue A blinking blue light indicates a WAN Port activity.
Solid Blue
A solid blue light indicates a LAN Port connection.
Blinking Blue A blinking blue light indicates a LAN Port activity.
Solid Green
A solid green light indicates that the 2.4/5 GHz wireless band is enabled.
Blinking Green A blinking green light indicates the WPS process is active.
Solid Green
A solid green light indicates that a USB device is detected on a USB port.
Solid Green
A solid green light indicates a proper connection to a DSL enabled telephone line.
Blinking Green A blinking green light indicates the DSL port is negotiating a connection.
Solid Green
Solid Red
A solid green light indicates an Internet connection.
A solid red light indicates no Internet connection is available.
Section 2 - Installation
Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the router in
an enclosed area such as a closet, cabinet, attic, or garage.
Note: This installation section is written for users who are setting up their home Internet service with the DSL-2885A Wireless
AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router for the first time. If you are replacing an existing DSL modem and/or
router, you may need to modify these steps.
Before you Begin
• Make sure to have your DSL service information provided by your Internet Service Provider handy. This
information is likely to include your DSL account's Username and Password. Your ISP may also supply you with
additional WAN configuration settings which are necessary to establish a connection. This information may
include the connection type (DHCP IP, Static IP, PPPoE, or PPPoA) and/or ATM PVC details.
• If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to
label each cable or take a picture of your existing setup before making any changes.
• We suggest setting up your DSL-2885A from a single device and verifying that it is connected to the Internet
before connecting additional devices.
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE connection software
such as WinPoET, BroadJump, or EnterNet 300 from your computer as the DSL-2885A will be providing this
functionality.
D-Link DSL-2885A User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the
operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other
objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of
materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that
the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (0.5 meters), at a 45-degree
angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better
reception.
3. Building materials make a difference. A solid metal door or aluminum studs may have a negative effect on
range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or
open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (fish tanks), mirrors,
file cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF
noise.
5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home
security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4
GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the
phone is not in use.
D-Link DSL-2885A User Manual
10
Section 2 - Installation
Manual Setup
Connect the supplied micro-filter to the telephone outlet. If you are using a telephone handset on the same
outlet, connect it to the PHONE port on the micro-filter.
Telephone Outlet
PHONE
Microfilter
Connect the phone cable from the DSL port on the microfilter to the DSL port of the modem router.
Caution: - To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
DSL-2885A
Phone Cable
D-Link DSL-2885A User Manual
Microfilter
11
Section 2 - Installation
Plug the power adapter into your modem router and connect to an available power outlet or surge protector.
Caution: - Use only the included power adapter with this product.
Power Adapter
DSL-2885A
Press the power button and verify that the power LED is lit. Allow one minute for the router to boot up.
After the modem router has powered up, verify that the Power and DSL LEDs are both lit.
D-Link DSL-2885A User Manual
12
Section 2 - Installation
If you wish to use a wired connection, connect the Ethernet cable from a LAN port of the DSL-2885A to the
Ethernet port on your computer.
Ethernet Cable
Computer
If you wish to use a wireless connection, the default Wi-Fi Networks are dlink-2885A-z and dlink-2885A5G-z.
Select either one from your computer’s wireless utility and connect. Enter the default Wi-Fi password printed
on the product label on the bottom of the DSL-2885A.
Computer
D-Link DSL-2885A User Manual
13
Section 3 - Getting Started
Getting Started
There are two ways you can configure your router to connect to the Internet and connect to your clients:
• D-Link Setup Wizard - This wizard will launch when you log into the router for the first time. Refer to page "Setup Wizard"
on page 15.
• Manual Setup - Log into the router and manually configure your router. Refer to "Configuration" on page 22.
D-Link DSL-2885A User Manual
14
Section 4 - Configuration
Name: Enter a custom name for this client.
Vendor: Displays the vendor of the device.
MAC Address: Displays the MAC address of the device.
IP Address: Enter a specific IP address for this client.
Reserve IP: Enable to reserve this IP address for this client.
Parental Allow or Block access to the router.
Control:
Click Save when you are done.
D-Link DSL-2885A User Manual
26
In the Settings menu on the bar on the top of the page, click Internet to see the
Click Advanced Settings... to expand the list and
see all of the options.
WAN Access Select whether the device should act as an xDSL Router or a
Type: Residential Gateway.
PVC: Use the default setting unless otherwise instructed by your ISP.
Ether WAN Port: If you selected Residential Gateway, sselect the Ethernet port that
will connect to the WAN. Use this setting if you do not intend to use
the built-in DSL modem.
Enable Tagged Enable or disable tagged VLAN.
Vlan:
VLAN ID: Enter the VLAN ID.
VLAN Priority: Enter the VLAN Priority from the default 0 (lowest) to 7 (highest).
My Internet Choose your Internet connection type from the drop-down menu.
Connection Is: You will be presented with the appropriate options for your
connection type.
For Dynamic IP (DHCP) refer to Dynamic IP (DCHP) on page 30.
For Static IP refer to Static IP on page 31.
For PPPoE refer to PPPoE on page 32.
For PPPoA refer to PPPoA on page 33.
For PPTP refer to PPTP on page 34.
For L2TP refer to L2TP on page 36.
D-Link DSL-2885A User Manual
29
Section 4 - Configuration
IPv4
Dynamic IP (DCHP)
Select Dynamic IP (DHCP) to obtain IP address information automatically from your Internet Service Provider (ISP). Select this option if your ISP
does not give you an IP address to use.
Host Name: The host name is optional but may be required by some ISPs. Leave
it blank if you are not sure.
Primary DNS Enter the primary DNS server IP address assigned by your ISP. This
Server: address is usually obtained automatically from your ISP.
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. This
Server: address is usually obtained automatically from your ISP.
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address The default MAC address is set to the Internet port’s physical interface
Clone: MAC address on the router. You can use the drop-down menu to
replace the Internet port’s MAC address with the MAC address of a
connected client.
Click Save when you are done.
D-Link DSL-2885A User Manual
30
Section 4 - Configuration
Static IP
Select Static IP if your IP information is provided by your Internet Service Provider (ISP).
IP Address: Enter the IP address provided by your ISP.
Subnet Mask: Enter the subnet mask provided by your ISP.
Default Enter the default gateway address provided by your ISP.
Gateway:
Primary DNS Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
MAC Address The default MAC address is set to the Internet port’s physical interface
Clone: MAC address on the router. You can use drop-down menu to replace
the Internet port’s MAC address with the MAC address of a connected
client.
Click Save when you are done.
D-Link DSL-2885A User Manual
31
Section 4 - Configuration
PPPoE
Select PPPoE if your Internet connection requires you to enter a PPPoE username and password. This information is provided by your Internet
Service Provider (ISP).
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
IP Address: Enter the IP address provided by your ISP (Static IP only).
Service Name: Enter the ISP service name (optional).
Primary DNS Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Click Save when you are done.
D-Link DSL-2885A User Manual
32
Section 4 - Configuration
PPPoA
Choose PPPoA if your Internet connection requires you to enter a PPPoA username and password. This information is provided by your Internet
Service Provider (ISP).
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
IP Address: Enter the IP address provided by your ISP (Static IP only).
Primary DNS Enter the primary DNS server IP address assigned by your ISP.
Server:
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
Click Save when you are done.
D-Link DSL-2885A User Manual
33
Section 4 - Configuration
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a
username and password.
PPTP Server IP Enter the PPTP server IP address provided by your ISP.
Address:
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection
Time: is maintained during inactivity. To disable this feature, enable Autoreconnect.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
PPTP IP Enter the IP address provided by your ISP (Static IP only).
Address:
PPTP Subnet Enter the subnet mask provided by your ISP (Static IP only).
Mask:
PPTP Gateway Enter the gateway IP address provided by your ISP (Static IP only).
IP Address:
Primary DNS Enter the primary DNS server IP address assigned by your ISP.
Server:
D-Link DSL-2885A User Manual
34
Section 4 - Configuration
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Click Save when you are done.
D-Link DSL-2885A User Manual
35
Section 4 - Configuration
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username
and password.
L2TP Server IP Enter the L2TP server IP address provided by your ISP.
Address:
Username: Enter the username provided by your ISP.
Password: Enter the password provided by your ISP.
Reconnect Select either Always-on, On-Demand, or Manual.
Mode:
Maximum Idle Enter a maximum idle time during which the Internet connection
Time: is maintained during inactivity. To disable this feature, enable Autoreconnect.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
L2TP IP Enter the IP address provided by your ISP (Static IP only).
Address:
L2TP Subnet Enter the subnet mask provided by your ISP (Static IP only).
Mask:
L2TP Gateway Enter the gateway IP address provided by your ISP (Static IP only).
IP Address:
Primary DNS Enter the primary DNS server IP address assigned by your ISP.
Server:
D-Link DSL-2885A User Manual
36
Section 4 - Configuration
Secondary DNS Enter the secondary DNS server IP address assigned by your ISP.
Server:
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Click Save when you are done.
D-Link DSL-2885A User Manual
37
Section 4 - Configuration
DSL
On this page you can configure your DSL settings. If you are unsure, you can obtain these settings from your ISP.
DSL Select whether to enable or disable each DSL modulation option.
Modulation: Usually it is best to leave these at their defaults, unless otherwise
instructed by your ISP.
Click Save when you are done.
D-Link DSL-2885A User Manual
39
Section 4 - Configuration
ATM
On this page you can configure your Asynchronous Transfer Mode (ATM) settings. If you are unsure, you can obtain these settings from your ISP.
Interface: Select the ATM interface from the drop-down menu.
VPI: Enter the Virtual Path Indicator (0 - 255).
VCI: Enter the Virtual Channel Indicator (32 - 65535).
Latency: Select the latency from the drop-down menu.
Encapsulation: Select the method of encapsulation provided by your ISP. You can
select LLC or VCMUX.
ATM QoS: Select the Quality of Service type from the drop-down menu.
Click Save when you are done.
D-Link DSL-2885A User Manual
40
Section 4 - Configuration
PTM
On this page you can configure your Packet Transfer Mode (ATM) settings. If you are unsure, you can obtain these settings from your ISP.
Interface: Select the PTM interface from the drop-down menu.
Latency: Select the latency from the drop-down menu.
D-Link DSL-2885A User Manual
41
Section 4 - Configuration
IPv6
To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4.
My Internet Choose your IPv6 connection type from the drop-down menu. You
Connection Is: will be presented with the appropriate options for your connection
type. Click Advanced Settings... to expand the list and see all of
the options.
For Auto Detection refer to Auto Detection on page 43.
For Static IPv6 refer to Static IPv6 on page 44.
For Auto Configuration (SLAAC/DHCPv6) refer to Auto Configuration (SLAAC/
DHCPv6) on page 46.
For PPPoE refer to PPPoE on page 48.
For IPv6 in IPv4 Tunnel refer to IPv6 in IPv4 Tunnel on page 50.
For 6 to 4 refer to 6 to 4 on page 52.
For 6rd refer to 6rd on page 53.
For Local Connectivity Only refer to Local Connectivity Only on page 55.
D-Link DSL-2885A User Manual
42
Section 4 - Configuration
Auto Detection
Auto Detection mode (not Auto-Configuration mode) automatically detects IPv6 the connection method used by your Internet Service Provider
(ISP). If your ISP provides an IPv6 service and Auto Detection failed to detect it, the user must manually select another IPv6 connection type (such
as PPPoE, Auto Configuration, 6rd, DS-Lite etc.)
Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
Enable Automatic Enable or disable automatic DHCP-PD services.
DHCP-PD in LAN:
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type: DHCPv6.
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DSL-2885A User Manual
43
Section 4 - Configuration
Static IPv6
Select Static IP if your IPv6 information is provided by your Internet Service Provider (ISP).
Use Link-Local Enable or disable a link-local address.
Address:
IPv6 Address: If you disabled Use Link-Local Address, enter the address supplied
by your ISP.
Subnet Prefix If you disabled Use Link-Local Address, enter the subnet prefix
Length: length supplied by your ISP.
Default Enter the default gateway for your IPv6 connection.
Gateway:
Primary DNS Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
LAN IPv6 Enter the LAN (local) IPv6 address for the router.
Address:
LAN IPv6 Link- Displays the router’s LAN link-local address.
Local Address:
Enable Check to enable the Automatic IPv6 Address Assignment feature.
Automatic
IPv6 Address
Assignment:
D-Link DSL-2885A User Manual
44
Section 4 - Configuration
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type: DHCPv6.
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DSL-2885A User Manual
45
Section 4 - Configuration
Auto Configuration (SLAAC/DHCPv6)
This is a connection method where the ISP assigns your IPv6 address when your router requests one from the ISP’s server. Some ISPs require you
to make some settings on your side before your router can connect to the IPv6 Internet.
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
Primary DNS If you selected Use the following DNS address above, enter the
Server: primary DNS server address.
Secondary DNS If you selected Use the following DNS address above, enter the
Server: secondary DNS server address.
Enable DHCP- Enable or disable prefix delegation services.
PD:
LAN IPv6 If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
Address: router.
LAN IPv6 Link- Displays the router’s LAN link-local address.
Local Address:
Enable Enable or disable the Automatic IPv6 Address Assignment feature.
Automatic
IPv6 Address
Assignment:
Enable Enable or disable automatic DHCP-PD services.
Automatic
DHCP-PD in
LAN:
D-Link DSL-2885A User Manual
46
Section 4 - Configuration
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type: DHCPv6.
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DSL-2885A User Manual
47
Section 4 - Configuration
PPPoE
Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet Service
Provider (ISP).
PPPoE Session: Choose Share with IPv4 to re-use your IPv4 PPPoE username and
password, or Create a new session.
Username: If you selected Create a new session above, enter the PPPoE
username provided by your ISP here.
Password: If you selected Create a new session above, enter the PPPoE
password provided by your ISP here.
Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select Dynamic IP.
IP Address: Enter the IP address provided by your ISP (Static IP only).
MTU: Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
Primary DNS If you selected Use the following DNS address above, enter the
Server: primary DNS server address.
Secondary DNS If you selected Use the following DNS address above, enter the
Server: secondary DNS server address.
Enable DHCP- Enable or disable prefix delegation services.
PD:
D-Link DSL-2885A User Manual
48
Section 4 - Configuration
LAN IPv6 Address: Enter the LAN (local) IPv6 address for the router.
LAN IPv6 Link- Displays the router’s LAN link-local address.
Local Address:
Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
Enable Automatic Enable or disable DHCP-PD for other IPv6 routers connected to the
DHCP-PD in LAN: LAN interface.
Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing
for a larger address allocation), such as /63. Contact your ISP for more
information.
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type: DHCPv6.
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DSL-2885A User Manual
49
Section 4 - Configuration
IPv6 in IPv4 Tunnel
The user can configure the IPv6 connection to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates IPv6 packets in IPv4 packets so
that IPv6 packets can be sent over an IPv4 infrastructure.
Remote IPv4 Enter the IPv4 remote address you will use.
Address:
Remote IPv6 Enter the IPv6 remote address you will use.
Address:
Local IPv4 Enter the IPv4 local address you will use.
Address:
Local IPv6 Enter the IPv6 local address you will use.
Address:
Subnet Prefix Enter the subnet prefix length supplied by your ISP.
Length:
DNS Type: Select either Obtain DNS server address automatically or Use the
following DNS address.
Primary DNS If you selected Use the following DNS address above, enter the
Server: primary DNS server address.
Secondary DNS If you selected Use the following DNS address above, enter the
Server: secondary DNS server address.
Enable DHCP- Enable or disable prefix delegation services.
PD:
LAN IPv6 If you disabled DHCP-PD, enter the LAN (local) IPv6 address for the
Address: router.
D-Link DSL-2885A User Manual
50
Section 4 - Configuration
LAN IPv6 Link- Displays the router’s LAN link-local address.
Local Address:
Enable Enable or disable the Automatic IPv6 Address Assignment feature.
Automatic
IPv6 Address
Assignment:
Enable Enable or disable automatic DHCP-PD services.
Automatic
DHCP-PD in
LAN:
Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Configuration DHCPv6.
Type:
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DSL-2885A User Manual
51
Section 4 - Configuration
6rd
In this section the user can configure the IPv6 6rd connection settings.
Assign IPv6 Enter the IPv6 prefix.
Prefix:
Primary DNS Enter the primary DNS server address.
Server:
Secondary DNS Enter the secondary DNS server address.
Server:
Enable Hub and Enable if you want to minimize the number of routes to the
Spoke Mode: destination by using a hub and spoke method of networking.
6rd Choose the 6rd DHCPv4 Option to automatically discover and
Configuration: populate the data values, or Manual Configuration to enter the
settings yourself.
6rd IPv6 Prefix: Enter the 6rd IPv6 prefix and mask length supplied by your ISP
(manual configuration only).
6rd Border Enter the 6rd border relay IPv4 address settings supplied by your ISP
Relay IPv4 (manual configuration only).
Address:
LAN IPv6 Enter the LAN (local) IPv6 address for the router.
Address:
LAN IPv6 Link- Displays the router’s LAN link-local address.
Local Address:
D-Link DSL-2885A User Manual
53
Section 4 - Configuration
Enable Automatic Check to enable the Automatic IPv6 Address Assignment feature.
IPv6 Address
Assignment:
Autoconfiguration Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless
Type: DHCPv6.
Router Enter the IPv6 address lifetime (in minutes).
Advertisement
Lifetime:
Click Save when you are done.
D-Link DSL-2885A User Manual
54
Section 4 - Configuration
Local Connectivity Only
Local Connectivity Only allows you to set up an IPv6 connection that will not connect to the Internet.
Enable ULA: Click here to enable Unique Local IPv6 Unicast Addresses settings.
Use Default Checking this box will automatically configure the ULA prefix for
ULA Prefix: the default setting.
ULA Prefix: If you wish to choose your own ULA prefix, enter it here.
Current IPv6 This section will display the current settings for your IPv6 ULA.
ULA Settings:
Click Save when you are done.
D-Link DSL-2885A User Manual
55
Section 4 - Configuration
Wireless
In the Settings menu on the bar on the top of the page, click Wireless to see the
wireless configuration options. To configure the router’s guest zone, click the Guest
Zone link. Refer to 59 for details. Click Advanced Settings... to expand the list
and see all of the options.
2.4 GHz
Status: Enable or disable the wireless frequency band.
Wi-Fi Name Create a name for your wireless network using up to 32 characters.
(SSID):
Password: Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the network.
Security Mode: Choose None, WEP, or WPA/WPA2-(Personal) (recommended).
802.11 Mode: Select the desired wireless networking standards to use. The available
options will depend on the wireless frequency band, as well as the
currently selected security mode.
Wi-Fi Channel: Select the desired channel. The default is Auto (recommended).
Transmission Select the desired wireless transmission power.
Power:
coexistence: NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED
TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT
Visibility Status: The default setting is Visible. Select Invisible if you do not want to
broadcast the SSID of your wireless network.
Turbo Mode: NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED
TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT NEED TEXT
D-Link DSL-2885A User Manual
56
Section 4 - Configuration
Schedule: Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedules section. Refer
to page 76 for more information.
5 GHz
Channel Width: Select Auto 20/40 if you are using both 802.11n and non-802.11n
wireless devices, or select 20 MHz if you are not using any 802.11n
wireless clients.
Wi-Fi Protected Setup
Trigger PBC: Press this button to initiate a Wi-Fi Protected Setup (WPS) pairing.
Click Save when you are done.
D-Link DSL-2885A User Manual
57
Section 4 - Configuration
Multiple SSID
The guest zone feature will allow you to create temporary zones that can be used by
guests to access the Internet. These zones will be separate from your main wireless
network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands.
In the Settings menu on the bar on the top of the page, click Wireless, then click
the Guest Zone link. Click Advanced Settings... to expand the list and see all of
the options. The following options apply to both the 2.4 GHz and the 5 GHz wireless
frequency bands:
Status: Enable or disable the guest zone for each wireless frequency band.
Wi-Fi Name Enter a wireless network name (SSID) that is different from your main
(SSID): wireless network.
Password: Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the guest zone.
Internet Access Enabling this option will confine connectivity to the Internet,
Only: disallowing guests from accessing other local network devices.
Click Save when you are done.
D-Link DSL-2885A User Manual
58
Section 4 - Configuration
Network
This section will allow you to change the local network settings of the router and to
configure the DHCP settings. In the Settings menu on the bar on the top of the page,
click Network. Click Advanced Settings... to expand the list and see all of the options.
LAN IP Address: Enter the IP address of the router. The default IP address is
192.168.0.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
configuration utility.
Subnet Mask: Enter the subnet mask of the router. The default subnet mask is
255.255.255.0.
Management The default address to access the router’s configuration is
Link: http://dlinkrouter.local./ Here, you can replace dlinkrouter with
a name of your choice.
Local Domain Enter the domain name (optional).
Name:
Enable DNS Disable to transfer the DNS server information from your ISP to your
Relay: computers. If enabled, your computers will use the router for a DNS
server.
Status: Enable or disable the DHCP server.
DHCP IP Enter the starting and ending IP addresses for the DHCP server’s IP
Address Range: assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conflict.
D-Link DSL-2885A User Manual
59
Section 4 - Configuration
DHCP Lease Enter the length of time for the IP address lease in minutes.
Time:
Always Enable this feature to broadcast your networks DHCP server to LAN/
Broadcast: WLAN clients.
UPnP: Enable or disable Universal Plug and Play (UPnP). UPnP provides
compatibility with networking equipment, software and peripherals.
IPv4 Multicast Enable to allow IPv4 multicast traffic to pass through the router from
Stream: the Internet.
IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from
Stream: the Internet.
Click Save when you are done.
D-Link DSL-2885A User Manual
60
Section 4 - Configuration
SharePort
This page will allow you to set up access to files on an external USB device plugged
into the router. You can do this through the local network or from the Internet using
either a web browser or an app on your smartphone or tablet. In the Settings menu
on the bar on the top of the page, click SharePort.
Status: Check to enable the media server functions, allowing connected
clients access to media files over the network.
UPnP Media Choose a name for your media server so that it can be found.
Server:
Windows Choose either Allow all users to access (no password) or Require
File Sharing router’s admin password to specify whether the router’s password
(SAMBA): will be required for access.
Web File Access: Enable remote access to files stored on a USB device plugged into
the router through a web browser.
Direct Links: This area will display the HTTP and HTTPS links to connect to your
SharePort drive through a web browser from a device on your
network.
FTP File Access: To allow file access via FTP, ensure that the Status is Enabled.
Enable Remote FTP Access allows users to access files from outside
the network via FTP. If this is enabled, enter the Remote FTP Port,
Maximum Users, Login Timeout, and the Maximum Idle Time.
Click Save when you are done.
To manage user accounts for SharePort access, click Create User and refer to the
next page for details.
D-Link DSL-2885A User Manual
61
Section 4 - Configuration
Create User
The Create User page allows you to manage your SharePort user accounts. The current
list of user accounts will be displayed, along with their current permissions and access
path. If they do not have an account set up, users will be restricted to guest access;
only having access to the “Guest” folder on the media server. The router can store a
maximum of ten accounts (including the “Admin” account).
If you wish to remove an account, click on its trash can icon in the Delete column. If
you wish to edit an account, click on its pencil icon in the Edit column. If you wish to
create a new account, click the Create User button. If you edit or create a user, the
following options will appear:
User Name: Enter the desired user name for the new account.
Password: Enter the password which the user will need to enter when logging in.
Permission: Select either Read Only or Read/Write to control whether the user
can edit, add, or delete files on the device.
Folder: Choose the parent folder that the user will be able to access. Files
and folders on a higher level will be unavailable. “root” means that
the user can access all files on the device. To change the selected
folder, click Browse and browse to the desired folder.
Click OK when you are done. The new user should be added to the
list of user accounts. To save the new list, click Save. To return to the
SharePort page, click SharePort.
D-Link DSL-2885A User Manual
62
Section 4 - Configuration
Firewall Settings
The router’s firewall protects your network from malicious attacks over the Internet.
In the Features menu on the bar on the top of the page, click Firewall Settings. Click
Advanced Settings... to expand the list and see all of the options.
Enable DMZ: Enable or disable Demilitarized Zone (DMZ). This completely exposes
the client to threats over the Internet, and is not recommended in
ordinary situations.
DMZ IP If you enabled DMZ, enter the IP address of the client you wish to
Address: expose, or use the drop-down menu to quickly select it.
Enable SPI IPv4: Enabling Stateful Packet Inspection (SPI) helps to prevent cyber
attacks by validating that the traffic passing through the session
conforms to the protocol.
Enable Enable this feature to protect your network from certain kinds of
Anti-Spoof “spoofing” attacks.
Checking:
IPv6 Simple Enable or disable IPv6 simple security.
Security:
IPv6 Ingress Enable or disable IPv6 ingress filtering.
Filtering:
PPTP: Allows multiple machines on the LAN to connect to their corporate
network using the PPTP protocol.
D-Link DSL-2885A User Manual
65
Section 4 - Configuration
IPSec (VPN): Allows multiple VPN clients to connect to their corporate network
using IPSec. Some VPN clients support traversal of IPSec through
NAT. This Application Level Gateway (ALG) may interfere with the
operation of such VPN clients. If you are having trouble connecting
with your corporate network, try turning this ALG off. Please check
with the system administrator of your corporate network whether
your VPN client supports NAT traversal.
RTSP: Allows applications that uses Real Time Streaming Protocol (RTSP)
to receive streaming media from the Internet.
SIP: Allows devices and applications using VoIP (Voice over IP) to
communicate across NAT. Some VoIP applications and devices have
the ability to discover NAT devices and work around them. This ALG
may interfere with the operation of such devices. If you are having
trouble making VoIP calls, try turning this ALG off.
Click Save when you are done.
D-Link DSL-2885A User Manual
66
Section 4 - Configuration
IPv4/IPv6 Rules
The IPv4/IPv6 Rules section is an advanced option that lets you configure what kind
of traffic is allowed to pass through the network. To configure the IPv4 rules, from
the Firewall Settings page click IPv4 Rules. To configure IPv6 rules, from the Firewall
Settings page click IPv6 Rules. To return to the main Firewall Settings page, click
Security Check.
To begin, use the drop-down menu to select whether you want to ALLOW or DENY
the rules you create. You can also choose to turn filtering OFF.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the Add Rules button. Click Save when you are done. If you edit or
create a rule, the following options will appear:
Name: Enter a name for the rule.
Source IP Enter the source IP address range that the rule will apply to, and using
Address Range: the drop-down menu, specify whether it is a WAN or LAN IP address.
Destination IP Enter the destination IP address range that the rule will apply to, and
Address Range: using the drop-down menu, specify whether it is a WAN or LAN IP
address.
Port Range: Select the protocol of the traffic to allow or deny (Any, TCP, or UDP)
and then enter the range of ports that the rule will apply to.
Schedule: Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedules section. Refer
to page 76 for more information.
Click Apply when you are done.
D-Link DSL-2885A User Manual
67
Section 4 - Configuration
Port Forwarding
Port forwarding allows you to specify a port or range of ports to open for specific
devices on the network. This might be necessary for certain applications to connect
through the router. In the Features menu on the bar on the top of the page, click
Port Forwarding.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the Add Rules button. Click Save when you are done. If you edit or
create a rule, the following options will appear:
Name: Enter a name for the rule.
Local IP: Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
TCP Port: Enter the TCP ports that you want to open. You can enter a single
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
UDP Port: Enter the UDP ports that you want to open. You can enter a single
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
Schedule: Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedules section. Refer
to 76 for more information.
Click Apply when you are done.
D-Link DSL-2885A User Manual
68
Section 4 - Configuration
Virtual Server
The virtual server allows you to specify a single public port on your router for
redirection to an internal LAN IP Address and Private LAN port. To configure the
virtual server, from the Port Forwarding page click Virtual Server. To return to the
main Port Forwarding page, click Port Forwarding.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the Add Rules button. Click Save when you are done. If you edit or
create a rule, the following options will appear:
Name: Enter a name for the rule.
Local IP: Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
Protocol: Select the protocol of the traffic to allow or deny (TCP, UDP, Both,
or Other).
Protocol If you entered Other above, enter the protocol number.
Number:
External Port: Enter the public port you want to open.
Internal Port: Enter the private port you want to open.
Schedule: Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to Always Enable, or
you can create your own schedules in the Schedules section. Refer
to page 76 for more information.
Click Apply when you are done.
D-Link DSL-2885A User Manual
69
Section 4 - Configuration
Website Filter
The website filter settings allow you to block access to certain web sites. You can
either create a list of sites to block, or create a list of sites to allow (with all other sites
being blocked).
In the Features menu on the bar on the top of the page, click Website Filter.
If you want to create a list of sites to block, select DENY computers access to ONLY
these sites from the drop-down menu. All other sites will be accessible. If you want
to specify a list of sites to allow, select ALLOW computers access to ONLY these
sites from the drop-down menu. All other sites will be blocked.
You may specify a maximum of fifteen web sites. To add a new site to the list, click
Create New Rule. Next, under Website URL/Domain enter the URL or domain. If you
wish to remove a rule, click on its trash can icon in the Delete column. If you wish to
edit a rule, simply replace the URL or domain.
Click Save when you are done.
D-Link DSL-2885A User Manual
70
Section 4 - Configuration
Static Routes
The Static Routes section allows you to define custom routes to control how data
traffic is moved around your network.
In the Features menu on the bar on the top of the page, click Static Routes.
To configure IPv6 rules, click IPv6 and refer to page 72 for more information. To
return to the main IPv4 static routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the Add Rules button. Click Save when you are done. If you edit or
create a rule, the following options will appear:
Name: Enter a name for the rule.
Destination IP: Enter the IP address of packets that will take this route.
Netmask: Enter the netmask of the route.
Gateway: Enter your next hop gateway to be taken if this route is used.
Metric: The route metric is a value from 1 to 16 that indicates the cost of
using this route. A value 1 is the lowest cost and 15 is the highest cost.
Interface: Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click Apply when you are done.
D-Link DSL-2885A User Manual
71
Section 4 - Configuration
IPv6
To configure IPv6 rules, on the Static Routes page click IPv6. To return to the main
IPv4 static routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the Add Rules button. Click Save when you are done. If you edit or
create a rule, the following options will appear:
Name: Enter a name for the rule.
DestNetwork: This is the IP address of the router used to reach the specified
destination.
PrefixLen: Enter the IPv6 address prefix length of the packets that will take this
route.
Metric: Enter the metric value for this rule here.
Interface: Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click Apply when you are done.
D-Link DSL-2885A User Manual
72
Section 4 - Configuration
Dynamic DNS
Most Internet Service Providers (ISPs) assign dynamic (changing) IP addresses. Using
a dynamic DNS service provider, people can enter your domain name in their web
browser to connect to your server no matter what your IP address is.
In the Features menu on the bar on the top of the page, click Dynamic DNS.
Enable Enabling dynamic DNS will reveal further configuration options.
Dynamic DNS:
Status: Displays the current dynamic DNS connection status.
Server Address: Enter the address of your dynamic DNS server, or select one from
the drop-down menu.
Host Name: Enter the host name that you registered with your dynamic DNS
service provider.
User Name: Enter your dynamic DNS username.
Password: Enter your dynamic DNS password.
Time Out: Enter a timeout time (in hours).
Click Save when you are done.
At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic
DNS host, refer to 74 for more information.
D-Link DSL-2885A User Manual
73
Section 4 - Configuration
IPv6 Host
The IPv6 host settings are found at the bottom of the Dynamic DNS page.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the Add Rules button. Click Save when you are done. If you edit or
create a rule, the following options will appear:
Host Name: Enter the host name that you registered with your dynamic DNS
service provider.
IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select
the server device in the drop-down menu.
Click Apply when you are done.
D-Link DSL-2885A User Manual
74
Section 4 - Configuration
Management
Time & Schedule
Time
The Time page allows you to configure, update, and maintain the correct time on
the internal system clock. From here you can set the time zone, the Network Time
Protocol (NTP) server, and enable or disable daylight saving time.
In the Management menu on the bar on the top of the page, click Time & Schedule.
Time Zone: Select your time zone from the drop-down menu.
Time: Displays the current date and time of the router.
Daylight Enable or disable daylight saving time.
Saving:
Update Time Enable or disable to allow an NTP server on the Internet to
Using an NTP synchronize the time and date with your router. If you enable this
Server: option, select an NTP server from the drop-down menu. To configure
the router’stime and date manually, disable this option and use the
drop-down menus that appear to input the time and date.
Click Save when you are done.
To configure and manage your schedules, click Schedule and refer to page 76 for
more information.
D-Link DSL-2885A User Manual
75
Section 4 - Configuration
Schedule
Some configuration rules can be set according to a pre-configured schedule. To
create, edit, or delete schedules, from the Time page click Schedule. To return to
the Time page, click Time.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you
wish to edit a rule, click on its pencil icon in the Edit column. If you wish to create a
new rule, click the Add Rules button. Click Save when you are done. If you edit or
create a rule, the following screen will appear:
First, enter the name of your schedule in the Name field.
Each box represents one hour, with the time at the top of each column. To add a time
period to the schedule, simply click on the start hour and drag to the end hour. You
can add multiple days to the schedule, but only one period per day.
To remove a time period from the schedule, click on the cross icon.
Click Apply when you are done.
D-Link DSL-2885A User Manual
76
Section 4 - Configuration
System Log
The router keeps a running log of events. This log can be sent to a Syslog server, and
sent to your email address. In the Management menu on the bar on the top of the
page, click System Log.
Enable Logging Check this box to send the router logs to a SysLog Server. If this is
to Syslog disabled, there will be no other options on this page.
Server:
Syslog Server IP Enter the IP address for the Syslog server. If the Syslog server is
Address: connected to the router, select it from the drop-down menu to
automatically populate the field.
Enable Email If you want the logs to be automatically sent to an email address,
Notification: enable this option.
Enter the settings for your email account. These are obtained from
your email service provider.
On Log Full: If email notification is enabled, this option will set the router to send
the log by email when the log is fully.
On Schedule: This option can be enabled to send an email according to a preconfigured schedule. See below.
Schedule: If you enable On Schedule is enabled, use the drop-down menu
to select the time schedule that the rule will be enabled on. The
schedule may be set to Always Enable, or you can create your own
schedules in the Schedules section. Refer to page 76 for more
information.
Click Save when you are done.
D-Link DSL-2885A User Manual
77
Section 4 - Configuration
Admin
This page will allow you to change the administrator (Admin) password and enable
remote management.
In the Management menu on the bar on the top of the page, click Admin.
Password: Enter a new password for the administrator account. You will need to
enter this password whenever you configure the router using a web
browser.
Enable
Graphical
Authentication
(CAPTCHA):
Enables a challenge-response test to require users to type letters or
numbers from a distorted image displayed on the screen to prevent
online hackers and unauthorized users from gaining access to your
router’s network settings.
Enable HTTPS Check to enable HTTPS to connect to the router securely. This means
Server: to connect to the router, you must enter https://dlinkrouter.local./
instead of http://dlinkrouter.local./
Enable Remote Remote management allows the DSL-2885A to be configured from the
Management: Internet by a web browser. A password is still required to access the web
management interface.
Remote Admin The port number used to access the DSL-2885A is used in the URL.
Port: Example: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address
of the DSL-2885A and 8080 is the port used for the web management
interface.
Note: If you enabled HTTPS Server and wish to access the router remotely
and securely, you must enter https:// at the beginning of the address.
D-Link DSL-2885A User Manual
78
Section 4 - Configuration
SSH / Telnet / If you want to allow router setup via the SSH, telnet, or TFTP protocols,
TFTP: you can configure it here.
For each protocol, click Enable Local Management to allow
administrators to configure the network from within, and/or Enable
Remote Management to allow administrators to configure the
network from outside.
If you enabled remote management, enter the remote port number
that the router will use for that protocol.
Click Save when you are done.
To load, save, or reset settings, or reboot the router, click Save.
D-Link DSL-2885A User Manual
79
Section 4 - Configuration
Upgrade
This page will allow you to upgrade the router’s firmware or language pack, either
automatically or manually. To manually upgrade the firmware or language pack, you
must first download the relevant file from http://support.dlink.com.
In the Management menu on the bar on the top of the page, click Upgrade.
Firmware The current firmware’s version and date will be displayed.
Information:
Check for New Click this button to prompt the router to automatically check for a new
Firmware: firmware version. If a newer version is found, it will prompt you to install
it.
Upgrade If you wish to upgrade manually, first download the firmware file you
Firmware: wish to upgrade to. Next, click the Upgrade Firmware button and
browse to the file to install the new firmware. You can also browse to a
language pack file to install a new language pack.
D-Link DSL-2885A User Manual
91
Section 4 - Configuration
Statistics
On the Statistics page you can view the amount of packets that pass through the
router on the WAN, LAN, and wireless segments.
In the Management menu on the bar on the top of the page, click Statistics.
You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz by clicking on the
respective tabs at the top. The graph will update in real time. To clear the information
on the graph, click Clear.
The traffic counter will reset if the device is rebooted.
D-Link DSL-2885A User Manual
92
Section 5 - Connecting to a Wireless Network
Connect a Wireless Client to your Router
WPS Button
The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most
wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS
button (or a software utility with WPS) that you can press to connect to the DSL-2885A router. Please refer to your user manual
for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps
below:
Step 1 - Press the WPS button on the DSL-2885A for about 1 second. The Internet LED on the front will start to blink.
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be
connected and your wireless connection will be secure with WPA2.
D-Link DSL-2885A User Manual
93
Section 5 - Connecting to a Wireless Network
Windows® 8
WPA/WPA2
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring
your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being
used.
To join an existing network, locate the wireless network icon in the
taskbar next to the time display.
Wireless Icon
Clicking on this icon will display a list of wireless networks that are
within connecting proximity of your computer. Select the desired
network by clicking on the network name.
D-Link DSL-2885A User Manual
94
Section 5 - Connecting to a Wireless Network
You will then be prompted to enter the network security key (Wi-Fi
password) for the wireless network. Enter the password into the box and
click Next.
If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router,
you can also press the WPS button on your router during this step to
enable the WPS function.
When you have established a successful connection to a wireless
network, the word Connected will appear next to the name of the
network to which you are connected to.
D-Link DSL-2885A User Manual
95
Section 5 - Connecting to a Wireless Network
Windows® 7
WPA/WPA2
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring
your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
Wireless Icon
2. The utility will display any available wireless networks in your area.
D-Link DSL-2885A User Manual
96
Section 5 - Connecting to a Wireless Network
3. Highlight the wireless connection with Wi-Fi name (SSID) you would
like to connect to and click the Connect button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to connect
to the router.
D-Link DSL-2885A User Manual
97
Section 5 - Connecting to a Wireless Network
5. Enter the same security key or passphrase (Wi-Fi password) that is on
your router and click Connect. You can also connect by pushing the
WPS button on the router.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as the one on the wireless
router.
D-Link DSL-2885A User Manual
98
Section 5 - Connecting to a Wireless Network
WPS
The WPS feature of the DSL-2885A can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to
configure the WPS feature:
1. Click the Start button and select Computer from the Start menu.
2. Click Network on the left side.
D-Link DSL-2885A User Manual
99
Section 5 - Connecting to a Wireless Network
3. Double-click the DSL-2885A.
DSL-2885A
4. Input the WPS PIN number (on the router label) in the Setup >
Wireless Setup menu in the Router’s Web UI) and click Next.
D-Link DSL-2885A User Manual
100
Section 5 - Connecting to a Wireless Network
5. Type a name to identify the network.
6. To configure advanced settings, click the
icon.
Click Next to continue.
D-Link DSL-2885A User Manual
101
Section 5 - Connecting to a Wireless Network
7. The following window appears while the Router is being configured.
Wait for the configuration to complete.
8. The following window informs you that WPS on the router has been
set up successfully.
Make a note of the security key as you may need to provide this
security key if adding an older wireless device to the network in the
future.
9. Click Close to complete WPS setup.
D-Link DSL-2885A User Manual
102
Section 5 - Connecting to a Wireless Network
Windows Vista®
Windows Vista® users may use the built-in wireless utility. If you are using another company’s wireless utility, please refer to the
user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a “site survey”
option similar to the Windows Vista® utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lowerright corner next to the time). Select Connect to a network.
The utility will display any available wireless networks in your area. Click
on a network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DSL-2885A User Manual
103
Section 5 - Connecting to a Wireless Network
WPA/WPA2
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring
your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Open the Windows Vista® Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower right corner of
screen). Select Connect to a network.
2. Highlight the Wi-Fi name (SSID) you would like to connect to and
click Connect.
D-Link DSL-2885A User Manual
104
Section 5 - Connecting to a Wireless Network
3. Enter the same security key or passphrase (Wi-Fi password) that is on
your router and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as the one on the wireless
router.
D-Link DSL-2885A User Manual
105
Section 5 - Connecting to a Wireless Network
Windows® XP
Windows® XP users may use the built-in wireless utility (Zero Configuration Utility). The following instructions are for Service
Pack 2 users. If you are using another company’s utility, please refer to the user manual of your wireless adapter for help with
connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.
If you receive the Wireless Networks Detected bubble, click on the
center of the bubble to access the utility.
or
Right-click on the wireless computer icon in your system tray (lowerright corner next to the time). Select View Available Wireless
Networks.
The utility will display any available wireless networks in your area. Click
on a Wi-Fi network (displayed using the SSID) and click the Connect
button.
If you get a good signal but cannot access the Internet, check you
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
D-Link DSL-2885A User Manual
106
Section 5 - Connecting to a Wireless Network
WPA/WPA2
It is recommended to enable WPA on your wireless router or access point before configuring your wireless adapter. If you are
joining an existing network, you will need to know the WPA key being used.
1. Open the Windows® XP Wireless Utility by right-clicking on the
wireless computer icon in your system tray (lower-right corner of
screen). Select View Available Wireless Networks.
2. Highlight the Wi-Fi network (SSID) you would like to connect to and
click Connect.
D-Link DSL-2885A User Manual
107
Section 5 - Connecting to a Wireless Network
3. The Wireless Network Connection box will appear. Enter the WPAPSK Wi-Fi password and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the WPA-PSK settings are correct. The
Wi-Fi password must be exactly the same as on the wireless router.
D-Link DSL-2885A User Manual
108
Section 6 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DSL-2885A. Read the
following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a different
operating system, the screenshots on your computer will look similar to these examples.
1. Why can’t I access the web-based configuration utility?
When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website, nor do you
have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must
be on the same IP subnet to connect to the web-based utility.
• Make sure you have an updated Java-enabled web browser. We recommend the following:
- Microsoft Internet Explorer® 7 or higher
- Mozilla Firefox 3.5 or higher
- Google™ Chrome 8 or higher
- Apple Safari 4 or higher
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a
different cable, or connect to a different port on the device if possible. If the computer is turned off, the link light may not be
on.
• Disable any Internet security software running on the computer. Software firewalls such as ZoneAlarm, BLACKICE, Sygate,
Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files
included with your firewall software for more information on disabling or configuring it.
D-Link DSL-2885A User Manual
109
Section 6 - Troubleshooting
• Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This
should open the login page for your web management.
• If you still cannot access the configuration, unplug the power to the router for 10 seconds and plug back in. Wait about 30
seconds and try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip
to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30
seconds to access the router. The default IP address is 192.168.1.1. When logging in, leave the password box empty.
D-Link DSL-2885A User Manual
110
Section 6 - Troubleshooting
3. Why can’t I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail,
we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
To find the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be
another computer, or a URL.
• Click on Start and then click Run.
• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and
press Enter (or click OK).
• Once the window opens, you’ll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472
D-Link DSL-2885A User Manual
111
Section 6 - Troubleshooting
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a
fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say
that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with
(1452+28=1480).
Once you find your MTU, you can now configure your router with the proper MTU size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (192.168.1.1) and click OK.
• Enter your username (admin) and password (blank by default). Click OK to enter the web configuration page for
the device.
• Click on Setup and then click Manual Configure.
• To change the MTU, enter the number in the MTU field and click Save Settings to save your settings.
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments
of ten.
D-Link DSL-2885A User Manual
112
Appendix A - Wireless Basics
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link
wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to
enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals
instead of wires. Wireless LANs are used increasingly in both home and office environments, and public areas such as airports,
coffee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more
efficiently. Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many
users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop
systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to
use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide
this link.
D-Link DSL-2885A User Manual
113
Appendix A - Wireless Basics
What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio
frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or office network.
Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products.
D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your
network.
How does wireless work?
Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But
wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area
to be able to connect your computer. There are two different types of wireless networksl: Wireless Local Area Network (WLAN),
and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point
has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access
point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places
like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other
outdoor venues.
D-Link DSL-2885A User Manual
114
Appendix A - Wireless Basics
Wireless Personal Area Network (WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30
feet away.
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as
much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other
devices that operate on batteries.
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office,
business, D-Link has a wireless solution for it.
Home Uses/Benefits
• Gives everyone at home broadband access
• Surf the web, check email, instant message, etc.
• Gets rid of the cables around the house
• Simple and easy to use
Small Office and Home Office Uses/Benefits
• Stay on top of everything at home as you would at office
• Remotely access your office network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate office space
D-Link DSL-2885A User Manual
115
Appendix A - Wireless Basics
Where is wireless used?
Wireless technology is expanding everywhere, not just at home or office. People like the freedom of mobility and it’s becoming
so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public
places is usually called “hotspots”.
Using a D-Link CardBus adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations
like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.
Wireless network is easy to setup, but if you’re installing it for the first time it could be quite a task not knowing where to start.
That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or access point
Make sure you place the router/access point in a centralized location within your network for the best performance. Try to
place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a
two-story home, you may need a repeater to boost the signal to extend the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access
point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency.
Security
D-Link DSL-2885A User Manual
116
Appendix A - Wireless Basics
Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on
the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up.
Wireless Modes
There are basically two modes of networking:
• Infrastructure – All wireless clients will connect to an access point or wireless router.
• Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network
adapters on each computer, such as two or more DSL-2885A wireless network CardBus adapters.
An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the
wireless router or access point.
An Ad-hoc network contains only clients, such as laptops with wireless CardBus adapters. All the adapters must be in Ad-hoc
mode to communicate.
D-Link DSL-2885A User Manual
117
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.)
At the prompt, type ipconfig and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings on
your router. Some firewall software programs may
block a DHCP request on newly installed adapters.
D-Link DSL-2885A User Manual
118
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 Click on Start > Control Panel > Network and Internet > Network and Sharing Center.
Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
Network
Connections.
Windows® XP Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet
as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is not
in use on the network. Set the Default Gateway the same as the LAN IP address of your
router (I.E. 192.168.0.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
D-Link DSL-2885A User Manual
119
Appendix B - Networking Basics
Wireless Security
This section will show you the different levels of security you can use to protect your data from intruders. The DSL-2885A offers the
following types of security:
• WPA2 (Wi-Fi Protected Access 2)
• WPA (Wi-Fi Protected Access)
• WPA2-PSK (Pre-Shared Key)
• WPA-PSK (Pre-Shared Key)
What is WPA?
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing
algorithm and by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is
based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP
regulates access to a wireless network based on a computer’s hardware-specific MAC address, which is relatively simple
to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized
network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between
8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your
wireless router or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public
key encryption system to ensure that only authorized network users can access the network.
D-Link DSL-2885A User Manual
120
Appendix C - Technical Specifications
Technical Specifications
Device Interfaces
• One RJ-11 xDSL port
• 802.11 ac/n/g/b Wireless LAN
• One 10/100/1000 Gigabit WAN port
• Four 10/100/1000 Gigabit LAN ports
• Two USB 2.0 ports
Power
Antenna Types
• Three external removable MIMO antennas
Storage Temperature
• -20 to 70 °C (-4 to 158 °F)
Standards
• IEEE 802.11ac
• IEEE 802.11n
• IEEE 802.11g
• IEEE 802.11b
• IEEE 802.11a
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3az
• IEEE 802.3x
Operating Humidity
• 10% to 95% maximum (non-condensing)
Security
• WPA™ - Personal/Enterprise
• WPA2™ - Personal/Enterprise
• Wi-Fi Protected Setup (WPS) PIN/PBC
• Input: 100 to 240 V AC, 50/60 Hz
• Output: 12 V DC, 2 A
Operating Temperature
• 0 to 45 °C (32 to 113 °F)
Certifications
• CE
• FCC
• LVD
• RCM
Dimensions
• 230 mm (9.05 inches)
• 155 mm (6.10 inches)
• 37 mm (1.45 inches)
Weight
• 523 grams (1.15 pounds)
Note:
• Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11n, and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including
volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
• Frequency Range varies depending on country’s regulation.
D-Link DSL-2885A User Manual
121
Appendix D - Regulatory Statements
Regulatory Statements
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Non-modifications Statement:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance
with FCC multi-transmitter product procedures. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection
of other channels is not possible.
Note
The country code selection is for non-USA models only and is not available to all USA models. Per FCC regulations, all WiFi product marketed in
the USA must be fixed to USA operational channels only.
D-Link DSL-2885A User Manual
122
Appendix D - Regulatory Statements
RF Frequency Requirements
This device is for indoor use only when using all channels in the 5.150 GHz-5.250 GHz, and 5.725 GHz-5.850 GHz frequency range.
High power radars are allocated as primary users of the 5.150 GHz-5.250 GHz, 5.250 GHz-5.350 GHz, and 5.725 GHz-5.850 GHz bands.
These radar stations can cause interference with and/or damage this device.
It is restricted to indoor environments only.
IMPORTANT NOTICE:
FCC Radiation Exposure Statement
This equipm,ent complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This equipemnt should be installed
and operated with minimum distance 25cm between the radiator and your body .
Non-Applicability of Warranty:
The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD
will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped
to D-Link Coporation, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that
are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common
carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise
we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are
prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the
foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to
pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance
with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming
D-Link DSL-2885A User Manual
123
Appendix D - Regulatory Statements
Customer Information:
(1) This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On bottom of this equipment is a label
that contains, among other information, a product identifier of TBC. If requested, this number must be provided to the telephone company.
(2) If this equipment Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router causes harm to the telephone network, the telephone
company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the
telephone company will notify the customer as soon as possible. Also you will be advised of your right to file a complaint with the FCC if you
believe it is necessary.
(3) The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the
equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modification to maintain
uninterrupted service.
(4) If you experience trouble with this equipment, disconnect it from the network until the problem has been corrected or until you are sure that
the equipment is not malfunctioning.
(5) Please follow instructions for repairing, if any (e.g. battery replacement section); otherwise do not alternate or repair any parts of device
except specified.
(6) Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission or
corporation commission for information.
(7) If the telephone company requests information on what equipment is connected to their lines, inform them of:
(a) The telephone number that this unit is connected to,
(b) The ringer equivalence number 0,
(c) The USOC jack required 0, and
(d) The FCC Registration Number TBC
Items (b) and (d) are indicated on the label. The ringer equivalence number (REN) is used to determine how many devices can be connected
to your telephone line. In most areas, the sum of the RENs of all devices on any one line should not exceed five (5.0). If too many devices are
attached, they may not ring properly.
(8) If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable
alarm equipment, consult your telephone company or a qualified installer.
D-Link DSL-2885A User Manual
124
Appendix D - Regulatory Statements
European Union:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. For more information, please refer to the Declaration of
Conformity.
Notice of Wireless Radio LAN Usage in The European Community:
•
At the time of writing this addendum, some countries such as Italy, Greece, Portugal, and Spain have not allowed operation of radio devices
in the 5 GHz bands, although operation of 2.4 GHz radio devices is allowed. Please check with your local authority to confirm.
•
This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the
potential for interference.
•
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in
France where restrictive use applies. This device may not be used for setting up outdoor radio links in France and in some areas the RF output
power may be limited to 10 mW EIRP in the frequency range of 2454 –2483.5 MHz. For detailed information the end-user should contact the
national spectrum authority in France.
This equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, OL, PT, RO, SM, SE, RS, SK,
ES, CI, HU, CY
Usage Notes:
•
To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the
products according to the country where the equipment will be deployed.
•
This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication
between two client devices without an Access Point.
•
Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in
5 GHz within the EU.
D-Link DSL-2885A User Manual
125
Appendix D - Regulatory Statements
2.4 GHz Wireless Frequency and Channel Operation in EEC Countries:
Region
Metropolitan
Guadeloupe, Martinique, St Pierre et
Miquelon, Mayotte
Reunion et Guyane
Rest of EU community
Spectrum Regulation
Europa
Frankreich
D-Link DSL-2885A User Manual
Frequency Band
2400 - 2454 MHz
2454 - 2483.5 MHz
Max output power (EIRP)
100 mW
100 mW indoor, 10 mW outdoor
2400 - 2483.5 MHz
2420 - 2483.5 MHz
100 mW
100 mW
MHz, Europa (ETSI)
2400 - 2483.5 MHz
2400 - 2454 MHz
2454 - 2483.5 MHz
R&TTE 1999/5/EC
WLAN 2.4 - 2.4835 GHz
IEEE 802.11b/g/n
max. EIRP Innenbereich
100 mW
100 mW
100 mW
max. EIRP Außenbereich
100 mW
100 mW
10 mW
126
Appendix D - Regulatory Statements
5 GHz Wireless Frequency and Channel Operation in EEC Countries:
Allowable 802.11a Frequencies and Channels
5.15-5.25 GHz
(Channels 36, 40, 44, 48)
Countries
Liechtenstein
5.15-5.25 GHz & 5.725-5.875 GHz
(Channels 36, 40, 44, 48, 149, 153, 157, 161, 165, 169)
Austria
5.15-5.35 GHz
(Channels 36, 40, 44, 48, 52, 56, 60, 64)
France
5.15-5.35 & 5.47-5.725 GHz
(Channels 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136,
140)
Denmark, Germany, Iceland, Finland, Netherlands,
Norway, Poland, Sweden, Slovenia, Luxembourg, U.K.,
Ireland, Slovak, Switzerland, Hungary, Italy
5.15-5.35 GHz & 5.725-5.875 GHz
(Channels 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165, 169)
Czech Republic
D-Link DSL-2885A User Manual
127
Appendix D - Regulatory Statements
European Community Declaration of Conformity:
Česky [Czech]
Dansk [Danish]
Deutsch [German]
Eesti [Estonian]
English
Español [Spanish]
Ελληνική [Greek]
Français [French]
Italiano [Italian]
Latviski [Latvian]
Lietuvių [Lithuanian]
Nederlands [Dutch]
Malti [Maltese]
Magyar [Hungarian]
D-Link tímto prohlašuje, že tento DSL-2885A je ve shodě se základními požadavky a dalšími příslušnými
ustanoveními směrnice 1999/5/ES.
Undertegnede D-Link erklærer herved, at følgende udstyr DSL-2885A overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Hiermit erklärt D-Link, dass sich das Gerät DSL-2885A in Übereinstimmung mit den grundlegenden Anforderungen
und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Käesolevaga kinnitab D-Link seadme DSL-2885A vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
D-Link hereby, declares that this DSL-2885A is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Por medio de la presente D-Link declara que el DSL-2885A cumple con los requisitos esenciales y cualesquiera otras
disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ D-Link ΔΗΛΩΝΕΙ ΟΤΙ DSL-2885A ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ
ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Par la présente D-Link déclare que l'appareil DSL-2885A est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Con la presente D-Link dichiara che questo DSL-2885A è conforme ai requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Ar šo D-Link deklarē, ka DSL-2885A atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Šiuo D-Link deklaruoja, kad šis DSL-2885A atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Hierbij verklaart D-Link dat het toestel DSL-2885A in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EG.
Hawnhekk, D-Link, jiddikjara li dan DSL-2885A jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn
relevanti li hemm fid-Dirrettiva 1999/5/EC.
Alulírott, D-Link nyilatkozom, hogy a DSL-2885A megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC
irányelv egyéb elõírásainak.
D-Link DSL-2885A User Manual
128
Appendix D - Regulatory Statements
Polski [Polish]
Português [Portuguese]
Slovensko [Slovenian]
Slovensky [Slovak]
Suomi [Finnish]
Niniejszym D-Link oświadcza, że DSL-2885A jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
D-Link declara que este DSL-2885A está conforme com os requisitos essenciais e outras disposições da Directiva
1999/5/CE.
D-Link izjavlja, da je ta DSL-2885A v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/
ES.
D-Link týmto vyhlasuje, že DSL-2885A spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/
ES.
D-Link vakuuttaa täten että DSL-2885A tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Warning Statement:
The power outlet should be near the device and easily accessible.
D-Link DSL-2885A User Manual
129
Appendix D - Regulatory Statements
Disposing of and Recycling Your Product
ENGLISH
EN
This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed
of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has
reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to
conserve the environment and protect human health.
D-Link and the Environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise
this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both
products and packaging.
D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy
and reduce CO2 emissions.
To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com.
DEUTSCH
DE
Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender örtlicher Gesetze
und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer Wiederverwertung zuzuführen ist. Bringen
Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende
seiner Nutzungsdauer erreicht hat. Für die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf
diese Weise durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche
Gesundheit zu schützen.
D-Link und die Umwelt
D-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und fühlt sich verpflichtet,
diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel größtmöglicher Umweltfreundlichkeit
her und verwendet wiederverwertbare, schadstoffarme Materialien bei Produktherstellung und Verpackung.
D-Link empfiehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen
Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.
Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, finden Sie entsprechende Informationen im Internet
unter www.dlinkgreen.com.
D-Link DSL-2885A User Manual
130
Appendix D - Regulatory Statements
FRANÇAIS
FR
Ce symbole apposé sur le produit ou son emballage signifie que, conformément aux lois et règlementations locales, ce produit ne
doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet effet par les
autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous
aidez à préserver l’environnement et à protéger la santé de l’homme.
D-Link et l’environnement
Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter
cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement
toxiques, tant dans ses produits que ses emballages.
D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez ainsi des économies
d’énergie et réduirez vos émissions de CO2.
Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le www.dlinkgreen.com.
ESPAÑOL
ES
Este símbolo en el producto o el embalaje significa que, de acuerdo con la legislación y la normativa local, este producto no se debe
desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida designado por las autoridades locales una
vez que ha llegado al fin de su vida útil; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje
de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos.
D-Link y el medio ambiente
En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades y nuestros productos
en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando
materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir
las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com.
D-Link DSL-2885A User Manual
131
Appendix D - Regulatory Statements
ITALIANO
IT
La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali,
questo prodotto non deve essere smaltito nei rifiuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il
prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti
da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la
salute umana.
D-Link e l'ambiente
D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto,
D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di
tossicità sia per i prodotti che per gli imballaggi.
D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuirà
a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com.
NEDERLANDS
NL
Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid
met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft
bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige
autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te
recyclen helpt u het milieu en de gezondheid van de mens te beschermen.
D-Link en het milieu
Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt
en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en
verpakking.
D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart
u energie en beperkt u de CO2-emissies.
Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen.
D-Link DSL-2885A User Manual
132
Appendix D - Regulatory Statements
POLSKI
PL
Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami
niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi
recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty
nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze. Poprzez proces recyklingu i
dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą Państwo chronić środowisko naturalne i dbać o
ludzkie zdrowie.
D-Link i środowisko
D-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu naszych działań i produktów
na środowisko naturalne. W celu zminimalizowania takiego wpływu firma D-Link konstruuje i wytwarza swoje produkty w taki sposób, aby były
one jak najbardziej przyjazne środowisku, stosując do tych celów materiały nadające się do powtórnego wykorzystania, charakteryzujące się
małą toksycznością zarówno w przypadku samych produktów jak i opakowań.
Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one wykorzystywane. Postępując w
ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.
Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną Internetową www.
dlinkgreen.com.
ČESKY
CZ
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí vyhazovat do komunálního
odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné místo určené místními úřady k tomuto účelu.
Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku i obalu pomáháte chránit životní prostředí i lidské zdraví.
D-Link a životní prostředí
Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své
výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit
energii a snížit emise CO2.
Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com.
D-Link DSL-2885A User Manual
133
Appendix D - Regulatory Statements
MAGYAR
HU
Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék
nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának
elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és
a csomagolás újrahasznosításával segíti védeni a környezetet és az emberek egészségét.
A D-Link és a környezet
A D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre gyakorolt hatásainak csökkentésére. Az ezen hatás
csökkentése érdekében a D-Link a lehető leginkább környezetbarát termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony károsanyagtartalmú termékeket gyárt és csomagolásokat alkalmaz.
A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a tápforrásból, ha nem használja azokat. Ezzel segít az energia
megtakarításában és a széndioxid kibocsátásának csökkentésében.
Környezetbarát termékeinkről és csomagolásainkról további információkat a www.dlinkgreen.com weboldalon tudhat meg.
NORSK
NO
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke skal kastes sammen
med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når
det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet
og forpakningen hjelper du å verne miljøet og beskytte folks helse.
D-Link og miljøet
Hos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet. For å minimalisere denne
innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i
produktene og forpakningen.
D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere
CO2-utslipp.
For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com.
D-Link DSL-2885A User Manual
134
Appendix D - Regulatory Statements
DANSK
DK
Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaffes som
husholdningsaffald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder,
når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets
emballage til genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.
D-Link og miljøet
Hos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på miljøet. For at minimere
denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer
med lavt giftighedsniveau i både produkter og emballage.
D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og
reducere CO2-udledningerne.
Du kan finde flere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på www.dlinkgreen.com.
SUOMI
FI
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä tuotetta ei pidä hävittää
yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on elinkaarensa päässä, toimita se lähimpään
viranomaisten hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä ympäristön
että ihmisten terveyttä ja hyvinvointia.
D-Link ja ympäristö
D-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta ympäristölle mahdollisesti
aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman
ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia aineita sisältäviä materiaaleja sekä tuotteissaan että niiden
pakkauksissa.
Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään
energiaa ja vähentämään hiilidioksiidipäästöjä.
Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com.
D-Link DSL-2885A User Manual
135
Appendix D - Regulatory Statements
SVENSKA
SE
Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i
hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats,
vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara
miljön och skydda människors hälsa.
D-Link och miljön
På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan
utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med
låg gifthalt i både produkter och förpackningar.
D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att göra detta hjälper
du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar www.dlinkgreen.com.
PORTUGUÊS
PT
Este símbolo no produto ou embalagem significa que, de acordo com as leis e regulamentações locais, este produto não deverá ser
eliminado juntamente com o lixo doméstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas
suas autoridades locais quando este tiver atingido o fim da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao
reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a saúde humana.
A D-Link e o ambiente
Na D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas operações e produtos possam ter no ambiente.
Para minimizar este impacto a D-Link concebe e constrói os seus produtos para que estes sejam o mais inofensivos para o ambiente possível,
utilizando meteriais recicláveis e não tóxicos tanto nos produtos como nas embalagens.
A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar
energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com.
D-Link DSL-2885A User Manual
136

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Create Date                     : 2016:03:31 10:52:42+08:00
Metadata Date                   : 2016:03:31 10:53:22+08:00
Modify Date                     : 2016:03:31 10:53:22+08:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:4bfcfa46-bb82-4cac-9afe-b0683eb6796c
Original Document ID            : xmp.did:329D91E97250E511BED6DE8F2BFD35AC
Document ID                     : xmp.id:E5D681A1EA94E511A54AD8BE72421A94
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:B937D290EA94E511A54AD8BE72421A94
Derived From Document ID        : xmp.did:3FDB7FA71194E51196DBDA3F3645A34A
Derived From Original Document ID: xmp.did:329D91E97250E511BED6DE8F2BFD35AC
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2015:11:27 17:39:37+08:00
Format                          : application/pdf
Title                           : User Manual rev 2.pdf
Creator                         : amawu
Producer                        : Acrobat Distiller 8.1.0 (Windows)
Trapped                         : False
Page Count                      : 111
Author                          : amawu

EXIF Metadata provided by EXIF.tools