UserMan
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1348711 |
| Application ID | OM0FmY0h2oLHpGfllQQ3IQ== |
| Document Description | UserMan |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 120.39kB (1504913 bits) |
| Date Submitted | 2010-09-24 00:00:00 |
| Date Available | 2010-09-24 00:00:00 |
| Creation Date | 2010-08-25 11:25:01 |
| Producing Software | GPL Ghostscript 8.63 |
| Document Lastmod | 2010-09-21 17:29:10 |
| Document Title | Boxee- QIG.pdf |
| Document Creator | PDFCreator Version 0.9.6 |
| Document Author: | Timmy |
CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTICE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local D-Link office. Industry Canada Notice: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device has been designed to operate with an antenna having a maximum gain of 2dB. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 11 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:c470c0a2-392d-44bf-9fbd-f05bcf4e2898 Producer : GPL Ghostscript 8.63 Keywords : Modify Date : 2010:09:21 17:29:10+08:00 Create Date : 2010:08:25 11:25:01+08:00 Creator Tool : PDFCreator Version 0.9.6 Metadata Date : 2010:09:21 17:29:10+08:00 Document ID : 0247f63b-b254-11df-0000-c266dba723a6 Format : application/pdf Title : Boxee- QIG.pdf Creator : Timmy Description : Author : Timmy Subject :EXIF Metadata provided by EXIF.tools