D Link SPW110A1 mydlinkTM Wi-Fi SMART PLUG User Manual DSP W110 A1 manual 20140429 copy
D Link Corporation mydlinkTM Wi-Fi SMART PLUG DSP W110 A1 manual 20140429 copy
D Link >
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2277711 |
| Application ID | LgsqnK0Df7R/i6BgVFgivQ== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 53.8kB (672441 bits) |
| Date Submitted | 2014-05-27 00:00:00 |
| Date Available | 2014-05-27 00:00:00 |
| Creation Date | 2014-05-22 10:47:10 |
| Producing Software | Mac OS X 10.9.2 Quartz PDFContext |
| Document Lastmod | 2014-05-23 17:04:50 |
| Document Title | DSP-W110_A1_manual 20140429 copy.pdf |
| Document Creator | Preview |
Version DRAFT | 04/29/2014 User Manual mydlink⢠Wi-Fi Smart Plug DSP-W110 Section 1 - Product Overview Hardware Overview LEDs and Buttons WPS/Reset Button ON/OFF Button WPS Press for one second to start the WPS connection process. The Status LED will start to blink. Reset Press and hold for 10 seconds to reset the device back to the factory default settings. Press to turn the device ON or OFF. Solid Green Status LED During the WPS process. Blinking Orange The device is attempting to communicate with your wireless network. Solid Red Solid Green Power LED Plug The device is successfully connected to your network. Blinking Green During power on/boot process or device is defective. The device is powered on. will not power on, try another outlet. D-Link DSP-W110 User Manual Connect your appliances, lamps, and other devices to monitor. Section 2 - Installation and Setup Installation and Setup Smart Plug. Step 1 Download the app from the App Store (iOS) or Google Play (Android). Step 2 Once installed, launch the app. Step 3 to continue. D-Link DSP-W110 User Manual Next Section 2 - Installation and Setup Step 4 When the Status LED is blinking orange, press Next. Step 5 If your router supports WPS, press the WPS button on your router. Press Next to continue. Please refer to your routerâs documentation if you are unsure if your router supports WPS. If your router does not support WPS or you want to manually connect to your wireless router, press Manual Setup and skip to Step 6 - Manual on page 11. D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 6 - WPS Press the WPS button on your Smart Plug. The Status LED will start to blink green. Allow up to two minutes to connect to your router. Press Next to continue. Note: You must press the WPS button on your router and the Smart Plug within two minutes. Step 7 - WPS After about two minutes, the Status LED will turn solid green. This indicates that the Smart Plug has successfully connected to your wireless router. Press Next to continue. D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 6 - Manual You must connect to the Smart Plug directly. Do not close this app. On your device, go to Settings > Wi-Fi. Select the network called DSPxxxx or DSP-xxxx_AC. Note: xxxx represents numbers and/or letters that are unique to your Smart Plug device. For the exact network name (SSID), refer to the Quick Install card that came with the product. Press Next to continue. Step 7 - Manual Enter the PIN code and press Connect. This code is located both on the front of the Smart Plug and the Quick Install card. D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 8 - Manual A list of available wireless networks will appear. Press your wireless network (the SSID of your wireless router). Step 9 - Manual If you have secured your wireless network, enter your Wi-Fi password and click Join. Continue with step 10 on the next page. D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 10 Once you connect, you will need to connect to your mobile device or tablet (that you are currently running the app from) to your wireless router (if you are not already). Make sure you keep this app running. On your device, go to Settings > Wi-Fi. Connect to your wireless router and enter your Wi-Fi password (if you have one). Go back to this app and press Next to continue. Step 11 Your device will now scan your network for Smart Plugs. D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 12 If you have received this error message, please do the following: a. Please make sure your mobile device is connected to your router. b. Make sure the Power LED and Status LEDs on your Smart Plug are both solid green. c. Press Hardware Settings and verify the settings. d. Press Discovery Again to rescan. Step 13 Enter a nickname for your Smart Plug. Click Change your Icons to change the icon for your device or click Done in the upper right corner D-Link DSP-W110 User Manual Section 2 - Installation and Setup Step 14 Select an icon that represents the device plugged into your Smart Plug and then press Use in the upper right corner. If you do not want to change the icon, press Cancel. Step 15 Your settings will now save. D-Link DSP-W110 User Manual 10 Appendix - Warranty Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures: ⢠⢠⢠⢠Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modi cations not expressly approved by the party responsible for compliance could void the userâs authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA Industry Canada statement: D-Link DSP-W110 User Manual 11 Appendix D - Warranty IC statement This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prĂŠsent appareil est conforme aux CNR dâIndustrie Canada applicables aux appareils radio exempts de licence. Lâexploitation est autorisĂŠe aux deux conditions suivantes : (1) lâappareil ne doit pas produire de brouillage, et (2) lâutilisateur de lâappareil doit accepter tout brouillage radioĂŠlectrique subi, mĂŞme si le brouillage est susceptible dâen compromettre le fonctionnement. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. DĂŠclaration dâexposition aux radiations: Cet ĂŠquipement est conforme aux limites dâexposition aux rayonnements IC ĂŠtablies pour un environnement non contrĂ´lĂŠ. Cet ĂŠquipement doit ĂŞtre installĂŠ et utilisĂŠ avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps D-Link DSP-W110 User Manual 12 LEDs Standards t*&&&O t*&&&H Support Functions t4NBrt rFNPte cPOtrPM tPPwFSTDIFEVMJOH tPPwer t4tBtus t'CC t6- Dimensions tYYNN Security t WPA t WP" t 814(WJFJPrPtected 4etup) Temperature t0QFSBUJOHtP Weight t5#% °C Humidity t0QFSBUJPOtPOPOcPOEFOTJOH t4tPrBHFtPOPOcPOEFOTJOH Power Input t*OQVU t Power Consumption tMBYJNVN W FYDMVEJOH"$PVUQVUPG4PDLFU0VUMFU D-Link DSP-W110 User Manual 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Annotate, Fill forms XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Create Date : 2014:05:22 10:47:10Z Creator Tool : Preview Modify Date : 2014:05:23 17:04:50+08:00 Metadata Date : 2014:05:23 17:04:50+08:00 Thumbnail Width : 256 Thumbnail Height : 200 Thumbnail Format : JPEG Thumbnail Image : (Binary data 12201 bytes, use -b option to extract) Keywords : Producer : Mac OS X 10.9.2 Quartz PDFContext Format : application/pdf Title : DSP-W110_A1_manual 20140429 copy.pdf N Pages : 1 Has Visible Transparency : False Has Visible Overprint : True Max Page Size W : 595.275391 Max Page Size H : 841.889648 Max Page Size Unit : Points Font Name : MyriadPro-Regular, MyriadPro-Semibold, MyriadPro-Bold Font Family : Myriad Pro, Myriad Pro, Myriad Pro Font Face : Regular, Semibold, Bold Font Type : Open Type, Open Type, Open Type Font Version : Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168 Font Composite : False, False, False Font File Name : MyriadPro-Regular.otf, MyriadPro-Semibold.otf, MyriadPro-Bold.otf Plate Names : Black Swatch Groups Group Name : Default Swatch Group Swatch Groups Group Type : 0 Rendition Class : proof:pdf Document ID : uuid:5fb76766-d832-c64c-ad16-6c0963440893 Instance ID : uuid:de9e5f2f-af2b-4fed-a0dc-222a07d0ecd2 Page Count : 13 Creator : PreviewEXIF Metadata provided by EXIF.tools