D Link TW1130 Wireless VPN Router User Manual di714P manual 1 31
D Link Corporation Wireless VPN Router di714P manual 1 31
D Link >
Contents
User Manual Part 3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 399293 |
| Application ID | fZPUnxOobWbyid6TWXysNw== |
| Document Description | User Manual Part 3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 280.86kB (3510744 bits) |
| Date Submitted | 2004-02-26 00:00:00 |
| Date Available | 2004-02-24 00:00:00 |
| Creation Date | 2003-10-20 16:56:17 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2004-02-06 11:47:46 |
| Document Title | di714P+_manual_1.31 |
| Document Creator | Adobe PageMaker 7.0 |
| Document Author: | jnavarrete |
Using the Configuration Menu Tools > Admin You can change the administrator and user passwords here. It is recommended that you change the administrator password from the default setting.The default password is blank (nothing). Password To change the administrator or user password, enter in the old password and enter the new password twice to confirm. Remote Management Remote Management allows the device to be configured through the WAN (Wide Area Network) port from the Internet using a web browser. A username and password is still required to access the browser-based management interface. IP Address Internet IP Address of the computer that has access to the DI-824VUP. If the IP Address is set to 0.0.0.0, this allows all Internet IP addresses to access the DI-824VUP. Port The port number used to access the DI-824VUP. Example:http://x.x.x.x:8080, where x.x.x.x. is the WAN IP address of the DI-824VUP+ and 8080 is the port used for the Web Management interface. 53 Using the Configuration Menu Tools > Time You will need to set the time zone corresponding to your location. The time can be set manually or the device can connect to a NTP (Network Time Protocol) server to retrieve the time. Enable NTP (Network Time Protocol). Select to synchronize the time on the DI-824VUP to an NTP server. Set Device Date and Time You can manually set the time on your network here. NTP is short for Network Time Protocol, an Internet standard protocol that assures accurate synchronization to the millisecond of computer clock times in a network of computers. 54 Using the Configuration Menu Tools > System The current system settings can be saved as a file onto the local hard drive. The saved file or any other saved setting file created by the DI-824VUP can be uploaded into the unit. To reload a system settings file, click on “Browse” to search the local hard drive for the file to be used. The device can also be reset back to factory default settings by clicking on “Reset to Default” button. Use the restore feature only if necessary. This will erase previously saved settings for the unit. Make sure to save your system settings before doing a factory restore. Save Settings to Local Hard Drive Click Save to save the current settings to the local Hard Drive. Load Settings from Local Hard Drive Click Browse to find the settings file, then click Load. Restore to Factory Default Settings Click Restore to restore the factory default settings. 55 Using the Configuration Menu Tools > Firmware You can upgrade the firmware of the device using this tool. Make sure that the firmware you want to use is saved on the local hard drive of the computer. Click on “Browse” to search the local hard drive for the firmware to be used for the update. Upgrading the firmware will not change any of your system settings but it is recommended that you save your system settings before doing a firmware upgrade. Please check the D-Link support site for firmware updates at http://support.dlink.com. Browse After you have downloaded the new firmware, click Browse in this window to locate the firmware update on your hard drive. Click Apply to complete the firmware upgrade. Note! Do not power off the unit when it is being upgraded. When the upgrade is complete, the unit will be restarted automatically. 56 Using the Configuration Menu Tools > Misc Ping Test In the open box, enter in a URL (i.e., www.dlink.com) or an IP address and click on Ping to test your internet connection. Restart Device Click Reboot to restart the unit. Block WAN Ping Click Enable to block the WAN ping. Computers on the Internet will not get a reply back from the DI-824VUP when it is being “ping”ed. This may help to increase security. SPI Mode When this feature is enabled, the router will record the packet information passed through the router such as IP address, port address, ACK, SEQ number, and so on. The router will also check every incoming packet to detect if it is valid. DoS When DoS is enabled, the router will prevent Denial of Service attacks on all computers connected to the DI-824VUP. 57 Using the Configuration Menu Tools > Misc (Continued) UPnP UPnP is short for Universal Plug and Play which is a networking architecture that provides compatibility among networking equipment, software, and peripherals. The DI-824VUP is a UPnP enabled router and will only work with other UPnP devices/softwares. If you do not want to use the UPnP Functionality, it can be disabled by selecting “Disabled”. VPN PassThrough The device supports VPN (Virtual Private Network) pass-through for both PPTP (Point-to-Point Tunneling Protocol) and IPSec (IP Security). Once VPN pass-through is enabled, there is no need to open up virtual services. Multiple VPN connections can be made through the device. This is useful when you have many VPN clients on the LAN. Non-standard FTP port If an FTP server you want to access is not using the standard port 21, then enter in the port number that the FTP server is using instead. 58 Using the Configuration Menu Status > Device Info This screen displays information about the DI-824VUP such as WAN, LAN, and Wireless status. DHCP Renew Use this button to reconnect to your ISP, if your WAN connection is set up for DHCP. DHCP Release Use this button to disconnect from your ISP, if your WAN connection is set up for DHCP. 59 Using the Configuration Menu Status > Log This screen displays activities occurring on the DI-824VUP. First Page Click First Page to go to the first page of the log. Last Page Click Last Page to go to the last page of the log. Previous Click Previous to go to the previous page of the log. Next Click Next to go to the next page of the log. Clear Click Clear to clear the current page of the log. Log Settings Click for advanced features (see next page). 60 Using the Configuration Menu Status > Log > Log Settings E-Mail Alert The DI-824VUP can be set up to send the log files to a specific email address. SMTP Server IP Enter in the IP address of the mail server. Email Address Enter in the email address of the recipient who will receive the email log. Send Mail Now Click to send mail immediately. IP Address of the Syslog Server Enter in the IP address of a syslog server within the network. Click Enable to activate the policy. The DI-824VUP will send all of it’s logs to the specified syslog server. Log Type Select the types of activity to log. By default, all values are selected. 61 Using the Configuration Menu Status > Stats In the Stats section, traffic statistics are displayed. Refresh This will update the page. Reset This will reset the packet counter to zero. WAN Displays Received / Transmitted packets from the WAN port. LAN Displays Received / Transmitted packets from the LAN port. 62 Using the Configuration Menu Status > Wireless This screen displays the connection time and the MAC Address of the connected wireless clients. Click on Refresh for the most recent information. 63 Using the Configuration Menu Help This screen displays the complete Help menu. For help at anytime, click the Help tab in the Configuration menu. 64 Installing the Print Server Software Insert the installation CD-ROM into the CD-ROM drive. The following window will be shown automatically. If it is not, please run “autorun.exe” on the CD-ROM. Click Install Print Server Software Select your Windows operating system 65 Installing the Print Server Software (continued) Wait until the following Welcome dialog appears. Click Next Select the destination folder. Click Next Then, the setup program will begin to install the programs into the destination folder. When the following window is displayed. Click Finish Click OK After rebooting your computer, the software installation procedure is finished. 66 Configuring on Windows 98se/Me Platforms After you finish the software installation procedure, your computer will be capable of network printing provided by the DI824VUP. For convenience, we call the printer connected to the printer port of the DI-824VUP a printer server. On a Windows 95/98 platform, open the Printers window in the My Computer menu. Now, you can configure the print server of the DI-824VUP: Find out the corresponding icon of your printer server, for example, the HP LaserJet 6L. Right click on that icon, and then select Properties. The following screen appears: Click on the Details tab Choose the “PRTmate: (All-in-1)” from the list attached at the Print To item. Be sure that the Printer Driver item is configured to the correct driver of your printer server. Click Port Settings Type in the IP address of the DI-824VUP. Click OK 67 Configuring on Windows 2000/XP Platforms Click Port The configuration procedure for a Windows 2000/XP platform is similar to that of Windows 95/98 except the screen of printer Properties. Click Configure Port Type in the IP address of the DI-824VUP. Click OK (Note: Screen shots are taken in Windows 2000, similar screens will appear in Windows XP.) 68 Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work, using Microsoft Windows XP. Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000, ME or 98. Go to Start > Control Panel > Network Connections Select Set up a home or small office network When this screen appears, Click Next. 69 Networking Basics Please follow all the instructions in this window: Click Next. In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next. 70 Networking Basics Enter a Computer description and a Computer name (optional). Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next. 71 Networking Basics Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. 72 Networking Basics In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A. 73 Networking Basics Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next. 74 Networking Basics Please read the information on this screen, then click Finish to complete the Network Setup Wizard. The new settings will take effect when you restart the computer. Click Yes to restart the computer. You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use. 75
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Create Date : 2003:10:20 16:56:17Z Modify Date : 2004:02:06 11:47:46+08:00 Subject : di714P+_manual_1.31 Page Count : 23 Creation Date : 2003:10:20 16:56:17Z Mod Date : 2004:02:06 11:47:46+08:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : jnavarrete Keywords : Metadata Date : 2004:02:06 11:47:46+08:00 Creator : jnavarrete Title : di714P+_manual_1.31 Description : di714P+_manual_1.31 Has XFA : NoEXIF Metadata provided by EXIF.tools