D Link UB1210A1 D-Link UWB Dongle DUB-1210 A1 User Manual rev

D Link Corporation D-Link UWB Dongle DUB-1210 A1 rev

User manual rev

D-Link DUB-9240 Wireless USB Kit   DUB-1210 Wireless USB Adapter  DUB-2240 Wireless USB HubUser Manual
2D-Link DUB-9240 User ManualTable of ContentsProduct Overview ........................................................3Package Contents....................................................3Getting Started ........................................................ 4Software Installation ...........................................4Using the Control Center .......................................14Link Info ........................................................... 14Configuration....................................................15About ...............................................................16Contacting Technical Support ..................................17Warranty .....................................................................18Registration ................................................................ 25Table of Contents
3D-Link DUB-9240 User ManualSection 1 - Product OverviewProduct Overview  D-Link DUB-2240 Wireless USB 4-Port Hub  D-Link DUB-1210 USB Adapter  USB Cable  Power Adapter (5V; 3A)  Firmware, Drivers and Utilities CD  Quick Installation GuidePackage ContentsNote: Using a power supply with a different voltage than the one included with the DUB-2240 will cause damage and void the warranty for this product.If any of the above items are missing, please contact your reseller.Your DUB-9240 should contain all the items listed below. Before you begin the installation of the device, please check to make sure that the following items are included in your package.
4D-Link DUB-9240 User ManualSection 3 - ConfigurationClick Next.Getting StartedBefore connecting your wireless USB Adapter or 4-port Hub, insert the provided CD into your PC. The InstallSheild Wizard will start automatically and detect what operating system you are running on the PC.After the InstallSheild Wizard detects what operating system is running on your PC, the Welcome screen will appear.Software Installation
5D-Link DUB-9240 User ManualSection 3 - ConfigurationThe  InstallSheild Wizard  will  begin  the  DUB-9240 software installation.The  wizard  will  prompt  you  to  insert  the  DUB-1210 wireless USB dongle into an available USB slot.Click OK.
6D-Link DUB-9240 User ManualSection 3 - ConfigurationClick Next to continue.The wizard will prompt you to install the Device Firmware Utility. Select “Install the software automatically”.The Device Firmware Utility will take a few moments to install.
7D-Link DUB-9240 User ManualSection 3 - ConfigurationAfter  the  Device  Firmware  Utility  has  installed,  your system  should  detect  the  DUB-1210 Wireless  USB Control Driver as new hardware.The  InstallSheild Wizard  will  prompt  you  to  install software for the DUB-1210 Wireless USB Control Driver. Select “Install the software automatically”.Click Next to continue.
8D-Link DUB-9240 User ManualSection 3 - ConfigurationClick Finish.After the DUB-1210 Wireless USB Control Driver has installed,  your  system  should  detect  the  DUB-1210 Wireless USB Host Wire Adapter as new hardware.
9D-Link DUB-9240 User ManualSection 3 - ConfigurationClick Next to continue.The  InstallSheild Wizard  will  prompt  you  to  install software  for  the  DUB-1210 Wireless  USB  Host Wire Adapter. Select “Install the software automatically”.The wizard will prompt you to remove the DUB-1210 wireless USB dongle from the USB port.Click OK.
10D-Link DUB-9240 User ManualSection 3 - ConfigurationClick Finish.The following prompt appears when the installation is complete.You will be prompted to power on the DUB-2240 Wireless USB Hub and connect it to an available USB port.Click OK.
11D-Link DUB-9240 User ManualSection 3 - ConfigurationClick Finish.The following prompt appears when the installation is complete.After the DUB-1210 Wireless USB Host Wire Adapter has installed, your system should detect the DUB-1210 Wireless USB Cable Based Association Framework Driver as new hardware.
12D-Link DUB-9240 User ManualSection 3 - ConfigurationClick Next to continue.The  InstallSheild Wizard  will  prompt  you  to  install software for the DUB-1210 Wireless USB Cable Based Association  Framework  Driver.  Select  “Install  the software automatically”.You will be prompted to remove the DUB-2240 Wireless USB Hub from the USB port.Click OK.
13D-Link DUB-9240 User ManualSection 3 - ConfigurationClick Finish.The following prompt appears when the installation is complete.You will be prompted to insert the DUB-1210 Wireless USB Dongle into an available USB port and push the Start button on the DUB-2240 Wireless USB Hub.Click OK.
14D-Link DUB-9240 User ManualSection 3 - ConfigurationUsing the Control CenterLink InfoLink List The  Link  Info  list  displays  the  status  of the connection between the wireless USB adapter and hub.
15D-Link DUB-9240 User ManualSection 3 - ConfigurationConfigurationConnection StatusThe Connection Status option allows you to power off the wireless USB adapter.Host Settings The Radio Channel and WUSB Host Name can be changed here.
16D-Link DUB-9240 User ManualSection 3 - ConfigurationAboutAbout Displays the software name.
17D-Link DUB-9240 User ManualAppendix A - Contacting Technical SupportContacting Technical SupportU.S. and Canadian customers can contact D-Link technical support through our web site or by phone.Before you contact technical support, please have the following ready:  • Model number of the product (e.g. DUB-9240)  • Hardware Revision (located on the label on the bottom of the switch (e.g. rev A1))  • Serial Number (s/n number located on the label on the bottom of the device). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.For customers within the United States: Phone Support:  (877) 453-5465 Internet Support:  http://support.dlink.com For customers within Canada: Phone Support:  (800) 361-5265  Internet Support:  http://support.dlink.com
18D-Link DUB-9240 User ManualAppendix B - WarrantyWarrantySubject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited Warranty:  • Only to the person or entity that originally purchased the product from D-Link or its authorized reseller or distributor, and  • Only for products purchased and delivered within the fifty states of the United States, the District of Columbia, U.S. Possessions      or Protectorates, U.S. Military Installations, or addresses with an APO or FPO.Limited Warranty:D-Link  warrants that  the  hardware  portion  of  the  D-Link  product  described  below  (“Hardware”)  will  be  free  from  material  defects  in workmanship  and  materials  under normal  use  from  the  date  of  original  retail  purchase  of  the  product, for the  period  set  forth  below (“Warranty Period”), except as otherwise stated herein.  • Hardware (excluding power supplies): One (1) year  • Free Technical Support - Basic Installation: Ninety (90) daysThe  customer’s  sole  and  exclusive  remedy  and  the  entire  liability  of  D-Link  and  its  suppliers  under  this  Limited Warranty  will  be,  at  D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. Repaired or replacement hardware will be warranted for the remainder of the original Warranty Period or ninety (90) days, whichever is longer, and is subject to the same limitations and exclusions. If a material defect is incapable of correction, or if D-Link determines that it is not practical to repair or replace the defective Hardware, the actual price paid by the original purchaser for the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund.
19D-Link DUB-9240 User ManualAppendix B - WarrantyLimited Software Warranty:D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of ninety (90) days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as contemplated in its documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with software that substantially conforms to D-Link’s functional specifications for the Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Replacement Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a refund is given automatically terminates.Non-Applicability of Warranty:The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold “As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything stated herein to the contrary.Submitting A Claim: The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D-Link to confirm the same, along with proof of purchase of the product (such as a copy of the dated purchase invoice for the product) if the product is not registered.• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-453-5465, who will attempt to assist the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID Number at https://rma.dlink.com/.
20D-Link DUB-9240 User ManualAppendix B - Warranty• After an RMA number is issued, the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories.• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsible for any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect. Expedited shipping is available upon request and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements, or for which an RMA number is not visible from the outside of the package. The product owner agrees to pay D-Link’s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements, or that is determined by D-Link not to be defective or non-conforming.What Is Not Covered:The Limited Warranty provided herein by D-Link does not cover:Products that, in D-Link’s judgment, have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty installation, lack of reasonable care, repair or service in any way that is not contemplated in the documentation for the product, or if the model or serial number has been altered, tampered with, defaced or removed; Initial installation, installation and removal of the product for repair, and shipping costs; Operational adjustments covered in the operating manual for the product, and normal maintenance; Damage that occurs in shipment, due to act of God, failures due to power surge, and cosmetic damage; Any hardware, software, firmware or other products or services provided by anyone other than D-Link; and Products that have been purchased from inventory clearance or liquidation sales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.While necessary maintenance or repairs on your Product can be performed by any company, we recommend that you use only an Authorized D-Link Service Office. Improper or incorrectly performed maintenance or repair voids this Limited Warranty.Disclaimer of Other Warranties:EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF  ANY  KIND WHATSOEVER  INCLUDING, WITHOUT  LIMITATION,  ANY WARRANTY  OF  MERCHANTABILITY,  FITNESS  FOR  A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
21D-Link DUB-9240 User ManualAppendix B - WarrantyIF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE. EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY, SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.Limitation of Liability:TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINK’S PRODUCT IS CONNECTED WITH, LOSS OF INFORMATION OR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE) RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDY FOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE OR NONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.Governing Law:This Limited Warranty shall be governed by the laws of the State of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limitations and exclusions may not apply. This Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state.Trademarks:D-Link is a registered trademark of D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners.Copyright Statement:No part of this publication or documentation accompanying this product may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from D-Link Corporation/D-Link Systems, Inc., as stipulated by the United States Copyright Act of 1976 and any amendments thereto. Contents are subject to change without prior notice.Copyright ©2005-2006 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.
22D-Link DUB-9240 User ManualAppendix B - WarrantyCE Mark Warning:This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.FCC Statement:This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These  limits  are  designed  to  provide reasonable protection against  harmful  interference in  a  residential  installation.   This  equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  • Reorient or relocate the receiving antenna.  • Increase the separation between the equipment and receiver.  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  • Consult the dealer or an experienced radio/TV technician for help.For detailed warranty information applicable to products purchased outside the United States, please contact the corresponding local  D-Link office.FCC Caution:Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.IMPORTANT NOTE:FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
23D-Link DUB-9240 User ManualAppendix B - WarrantyTechnical requirements for hand held UWB systems (a) UWB devices operating under the provisions of this section must be hand held, i.e., they are relatively small devices that are primarily  hand held while being operated and do not employ a fixed infrastructure. (1) A UWB device operating under the provisions of this section shall transmit only when it is sending information to an associated receiver.  The UWB intentional radiator shall cease transmission within 10 seconds unless it receives an acknowledgement from the associated receiver that its transmission is being received. An acknowledgment of reception must continue to be received by the UWB intentional radiator at least every 10 seconds or the UWB device must cease transmitting. (2) The use of antennas mounted on outdoor structures, e.g., antennas mounted on the outside of a building or on a telephone pole, or any fixed outdoors infrastructure is prohibited. Antennas may be mounted only on the hand held UWB device. (3) UWB devices operating under the provisions of this section may operate indoors or outdoors. Technical requirements for indoor UWB systems. (a) Operation under the provisions of this section is limited to UWB transmitters employed solely for indoor operation. (1) Indoor UWB devices, by the nature of their design, must be capable of operation only indoors. The necessity to operate with a fixed indoor infrastructure, e.g., a transmitter that must be connected to the AC power lines, may be considered sufficient to demonstrate this. (2) The  emissions  from  equipment  operated under this section shall not be intentionally directed outside of the building in which the equipment is located, such as through a window or a doorway, to perform an outside function, such as the detection of persons about to enter a building. (3) The use of outdoor mounted antennas, e.g., antennas mounted on the outside of a building or on a telephone pole, or any other outdoors infrastructure is prohibited. (4) Field disturbance  sensors  installed  inside  of metal  or  underground storage tanks are  considered  to  operate  indoors  provided the emissions are directed towards the ground.
24D-Link DUB-9240 User ManualAppendix B - WarrantyTechnical requirements applicable to all UWB devices. (a) UWB devices may not be employed for the operation of toys. Operation on board an aircraft, a ship or a satellite is prohibited.
25D-Link DUB-9240 User ManualAppendix C - RegistrationVersion 1.0May 4, 2006Product registration is entirely voluntary and failure to complete  or return this form will not diminish your warranty rights.Registration

Navigation menu