D Link WA130C2 Wireless N USB adapter User Manual Warning statements

D Link Corporation Wireless N USB adapter Warning statements

Manual

2D-Link DWA-130 User ManualTable of ContentsProduct Overview ........................................................ 3Package Contents ................................................... 3System Requirements ............................................. 3Introduction ..............................................................4Features .................................................................. 5Hardware Overview ................................................. 6Installation ....................................................................7Getting Started ........................................................7Remove Existing Installations ............................ 7Disable Other Wireless Adapters ....................... 8Wireless Installation Considerations ...................... 10Adapter Installation ................................................11Conguration ............................................................. 17D-Link Wireless Connection Manager ................... 17Wireless Networks ...........................................18Wi-Fi Protected Setup (WPS) ..........................19Personal Identication Number (PIN)..................20My Wireless Networks ..................................... 22Add Prole ...................................................23Modify Prole ............................................... 24Support ............................................................25About ............................................................... 26Connect to a Wireless Network ................................ 27Using Windows® Vista™ ......................................... 27Using Windows® XP ............................................... 29Wireless Security.......................................................30What is WEP? .......................................................30What is WPA? .......................................................31Congure WEP ......................................................32Using the D-Link Wireless Connection Manager ........................................................... 32Using Windows® Vista...................................... 34Using the Windows® XP Utility ......................... 36Congure WPA/WPA2 Passphrase ....................... 38Using the D-Link Connection Manager ............ 38Using Windows® Vista......................................40Using the Windows® XP Utility ......................... 42Congure WPA/WPA2 (RADIUS) .......................... 44Using the D-Link Wireless Connection Manager ... 44Troubleshooting ........................................................ 45Wireless Basics ......................................................... 49Wireless Modes ........................................................... 53Networking Basics .................................................... 54Check your IP address .......................................... 54Windows® XP/2000 Users................................ 54Windows Vista™ Users ..................................... 54Statically Assign an IP address ............................. 55Windows® XP/2000 Users ..................................... 55Windows Vista™ Users ........................................... 56Technical Specications........................................... 57Table of Contents
3D-Link DWA-130 User ManualSection 1 - Product Overview• D-Link DWA-130 Wireless N™ USB Adapter• Cradle• Manual and Warranty on CD• D-Link Wireless Connection Manager on CD• Quick Installation GuideSystem Requirements• A computer or laptop with an available USB 2.0 port• Windows® Vista™, 2000 (Service Pack 4) or XP (Service Pack 2)• CD-ROM Drive• 300MHz processor and at least 64MB of RAM• A draft 802.11n or 802.11g access point or wireless routerProduct OverviewPackage Contents
4D-Link DWA-130 User ManualSection 1 - Product OverviewIntroductionThe DWA-130 Wireless N™ USB Adapter is a convenient wireless connectivity solution for desktop or notebook PCs. Instead of stringing Ethernet cables to your PC or dismantling your desktop computer case, the DWA-130 can enable Draft 802.11n wireless connectivity by simply utilizing your desktop or notebook PC’s USB port.Powered  by  Wireless  N™  technology,  the  DWA-130  provides  a  faster  wireless  connection  and  superior  reception than 802.11g*. DWA-130 is designed for greater coverage and for those that demand higher bandwidth networking. Maximize wireless performance by connecting this USB Adapter to a Wireless N™ router and stay connected from virtually anywhere in the home. This USB Adapter supports WPA and WPA2 encryption to prevent outside intrusion and protect your personal information from being exposed.D-Link’s Quick Setup Wizard guides you step-by-step through the installation process. The D-Link Wireless Manager is included with this product to keep track of all your most frequently accessed networks.Compact in size, robust in speed the DWA-130 Wireless N™ USB Adapter is great for travel and a convenient solution for providing high performance  wireless  connectivity to your desktop or  notebook PC. Enjoy  the many  benets  of wireless connectivity today!* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trafc, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range.
5D-Link DWA-130 User ManualSection 1 - Product OverviewFeatures• Compact size for placement anywhere.• Convenience of Plug & Play installation.• Fully 802.11g compatible.• Draft 802.11n compliant.• Powered by the USB port; no external power source required.• USB 2.0 standard*.• You can securely connect to a wireless network using WPA/WPA2 (Wi-Fi Protected Access) providing you a much higher level of security for your data and communication than has previously been available. You may also use 802.1x for wireless authentication.• Position the DWA-130 almost anywhere in your workspace to achieve the best reception possible.• Supports Infrastructure networks via an access point• User-friendly conguration and diagnostic utilities.• WPS button for more secure and easy wireless connection* Using a USB 1.1 port will adversely affect throughput.
6D-Link DWA-130 User ManualSection 1 - Product OverviewHardware OverviewUSB PortUsed to connect the DWA-130 to your computer.
7D-Link DWA-130 User ManualSection 2 - InstallationGetting StartedInstallationThis section will walk you through the installation process. If you have a built-in wireless adapter, please disable it in device manager before installing your D-Link adapter. Also, if you have previously installed another wireless adapter, please make sure any software is uninstalled.Before installing your new D-Link wireless adapter, please verify the following:• Remove any previous installations of wireless adapters• Disable any built-in wireless adapters • Verify the settings such as the SSID and security settings of the network(s) you want to connect toRemove Existing InstallationsIf you’ve installed a different manufacture’s adapter or a different model D-Link adapter, make sure the software is uninstalled before installing the new software. Some utilities may cause a conict with the new software. If you plan to use multiple adapters at different times, make sure the utilities are not set to load when your computer boots up. Windows® XP and Vista users may use the built-in wireless utility for all adapters.To remove any old software:  Windows® XP/Vista™ users:  Click Start > Control Panel > Add or Remove Programs.   Windows® 2000 users: Click Start > Settings > Control Panel > Add or Remove Programs.
8D-Link DWA-130 User ManualSection 2 - InstallationDisable Other Wireless AdaptersMost newer laptops may include a built-in wireless adapter. To prevent any conicts with the D-Link wireless adapter, it is recommended to disable the wireless adapter (as well as any unused Ethernet adapters).From  the  desktop,  right-click  on  the  My  Computer  icon  and  select Properties. Click the Hardware tab and then click Device Manager. Scroll down the list and click the + sign to the left of Network Adapters.Right-click  the  adapter  you  would  like  to  disable  and  select Disable.
9D-Link DWA-130 User ManualSection 2 - InstallationClick Yes to disable the adapter.The  adapter  is  now  disabled.  When  disabled,  a  red  X  will  be displayed. Disabling the adapter will not remove the drivers. If you would like to use the adapter, simply right-click it and select Enable.
10D-Link DWA-130 User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link wireless adapter lets you access your network using a wireless connection from virtually anywhere within the operating  range  of  your wireless  network.  Keep  in mind, however,  that  the number, thickness  and  location  of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number  of walls and ceilings between  the D-Link adapter and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware  of  the  direct  line  between  network  devices.  A  wall  that  is  1.5  feet  thick  (.5  meters),  at  a   45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building Materials make a difference. A solid metal door or aluminum studs may have a negative effect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product  away (at  least 3-6  feet or  1-2 meters)  from electrical  devices or appliances  that generate RF noise.5. If you are using 2.4GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
11D-Link DWA-130 User ManualSection 2 - InstallationWarning: Do NOT install the DWA-130 USB Adapter into your computer before installing the driver software from the D-Link CD.Turn on the computer and Insert the D-Link DWA-130 Driver CD in the CD-ROM drive. If the CD Autorun function does not automatically start on your computer, go to Start > Run. In the run box type “D:\DWA130.exe” (where D: represents the drive letter of your CD-ROM drive).When the autorun screen appears, click Install Drivers.Adapter InstallationClick Install Drivers
12D-Link DWA-130 User ManualSection 2 - InstallationThe InstallShield Wizard window will appear.By default setup will install to the default location: C:\Program Files\D-Link\DWA-130, where C: represents the drive letter of your hard drive. To install to a different location click Browse and specify the location.Select the Program Files folder location.Click NextClick NextClick Next
13D-Link DWA-130 User ManualSection 2 - InstallationThe Wireless Connection Wizard will now appear.If you want to manually connect to a wireless network, refer to page 15. The following instructions will connect you to a wireless network using Wi-Fi Protected Setup (WPS).Insert  the  adapter  into  an  available  USB  port  on  your computer.If the Found New Hardware Wizard appears, click Cancel. Click NextClick Next
14D-Link DWA-130 User ManualSection 2 - InstallationTo connect to your network using the WPS button conguration method. Press the WPS button on your access point or wireless router within 2 minutes to establish connectivity.  When this screen appears, you have successfully connected to your wireless network. Click Next to complete your setup.Click NextPush Button Conguration (PBC)Press  down  the  WPS button (physical button or the virtual button of GUI)
15D-Link DWA-130 User ManualSection 2 - InstallationTo manually connect to your wireless network, select Manually connect to a wireless network and then click Next. Click NextClick the Scan button to display a list of wireless networks (site survey). Click on the network name (SSID) and click Next.Click NextEnter the network name (SSID) manually. If you enter the SSID incorrectly, you will automatically be brought to the site survey page. Click Scan to display the site survey page. Click Next
16D-Link DWA-130 User ManualSection 2 - InstallationClick  Finish  to  continue.  If  you  are  prompted  to  reboot  your computer, select Yes, I want to restart my computer now.Click FinishWhen this  screen appears,  you are successfully  connected to your wireless network. Click Next to complete your setup.Click Next
17D-Link DWA-130 User ManualSection 3 - CongurationCongurationThis section will show you how to congure your new D-Link wireless adapter using the D-Link Utility as well as the Windows® XP Zero Conguration Utility and Vista WLAN Autoconguration.D-Link Wireless Connection ManagerThe D-Link DWA-130 uses the Wireless Connection Manager as the management software. The manager provides the user an easy interface to change any settings related to the wireless adapter. Clicking on the Wireless Connection Manager icon on the desktop will start the Conguration.If you are using Windows® Vista™ please skip to page 27 or Windows® XP skip to page 29.Double-click the Wireless Connection Manager icon on your desktop.
18D-Link DWA-130 User ManualSection 3 - CongurationWireless NetworksThe SSID (Service Set Identier) is the name of the wireless network.Displays  the  MAC  address  of  the  wireless device.Displays  the  Link  Quality  of  the  wireless connection. If there is a “lock” icon, this means the wireless network is secure. You must know the encryption key/security settings to connect.Displays the channel of the wireless network.Connect  to  a  wireless  network  using  Wi-Fi Protected Setup. Refer to the next page.Rescans for available wireless networks in your area.Highlight a wireless network and click the Connect button. If the network is secure, a pop-up window will  appear.  Enter  the  security  information  to connect (refer to the Wireless Security section for more information).Select  a  wireless  network  profile  from  the  drop-down menu and click Activate to connect. Allow up to 30 seconds to connect.MAC:SSID:Channel:Signal:Security:Refresh Button:Connect Button:Activate Button:The Wireless Networks (Site Survey) page will display all wireless networks that are available in your area. To connect to a network, simply highlight the wireless network (SSID) and click Connect.WPS Button:
19D-Link DWA-130 User ManualSection 3 - CongurationWi-Fi Protected Setup (WPS)Wi-Fi Protected Setup (WPS) System is designed for easy setup of security-enabled Wi-Fi networks. It is recommended to have the access point or wireless router nearby during setup. For more information on WPS, visit the Wi-Fi Alliance website at www.wi-.org.“Push Button Conguration” (PBC) is a virtual button in the utility  that  connects  you  to  other  WPS-enabled  devices.  A connection can be established by clicking on the virtual button, then pushing the physical button on the access point or wireless router within 120 seconds. Refer to page 14.“Personal  Identication  Number”  (PIN)  is  a  unique  number generated randomly  by the wireless  adapter’s utility. Entering this number in the utility of the WPS-enabled wireless router or access point connects you with the intended wireless network. Refer to the next page for more information.
20D-Link DWA-130 User ManualSection 3 - CongurationIf you want to connect using the PBC method, refer to page 14. To use the PIN method, select PIN (Personal Identication Number) and click Next.Click NextMake sure your access point or wireless router is close by. Write down the number on the screen. Enter this number in your access point or wireless router. Please refer to the manufacture’s manual for instructions.Once you click Next, you will have 2 minutes to enter this number in your access point or wireless router.Click NextPersonal Identication Number (PIN)
21D-Link DWA-130 User ManualSection 3 - CongurationThe adapter will try to establish connectivity to your access point or wireless router.When this screen appears, you have successfully established connectivity. Click Finish to complete your setup.Click Finish
22D-Link DWA-130 User ManualSection 3 - CongurationMy Wireless NetworksThe My Wireless Networks page will allow you to create, edit, and delete wireless network proles. Every time you connect to a network using the Wireless Networks page, a prole will automatically be created. New Button:Modify:Click  New  to  create  a  new  wireless  network prole (refer to page 23).Click Modify to edit a current prole (refer to page 24).Click Delete to remove a prole.Click Activate to use a prole. Allow up to 30 seconds to connect to the wireless network.The Prole Details section will display information about the wireless network such as the network name (SSID), network type (Infrastructure), and if the network is secured.Delete:Activate:Prole Details:
23D-Link DWA-130 User ManualSection 3 - CongurationAdd ProleYou may add a new network by clicking the New button from the My Wireless Networks page.Prole Name:SSID:Enter a name for your prole (e.g. Home, Ofce, Coffee Shop).Enter the SSID of the wireless network.Select  the  network  type.  If  you  are  connecting to  a  wireless  router  or  access  point,  select Infrastructure. If you are connecting to another wireless  client  such  as  an  adapter,  select  Ad-hoc. Select  the  type  of  security  used.  Please  refer to  the  Wireless  Security  section  for  more information.Click OK to save your settings.Network Type:Security Type:OK Button:
24D-Link DWA-130 User ManualSection 3 - CongurationModify ProleYou may edit an existing prole by selecting the prole and clicking the Modify button from the My Wireless Networks page.Prole Name:SSID:Enter a name for your prole (e.g. Home, Ofce, Coffee Shop).Displays the SSID of the network. Displays the network type.Select the type of security used. Please refer to  the  Wireless  Security  section  for  more information.Click OK to save your settings.Network Type:Security Type:OK Button:
25D-Link DWA-130 User ManualSection 3 - CongurationSupportIf you need help, click the Support button. A panel will appear to the right of the utility which will display information about the utility.
26D-Link DWA-130 User ManualSection 3 - CongurationThe About screen gives you information about the Firmware and Utility Versions of the DWA-130.About
27D-Link DWA-130 User ManualSection 3 - CongurationConnect to a Wireless NetworkUsing Windows® Vista™Windows® Vista™ users may use the built-in wireless utility. If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® Vista™ utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right  corner  next  to  the  time).  Select  Connect  to  a network.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility.     orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If  you  get  a  good  signal  but  cannot  access  the  Internet, check  you  TCP/IP  settings  for  your  wireless  adapter.  Refer to  the  Networking  Basics  section  in  this  manual  for  more information.
28D-Link DWA-130 User ManualSection 3 - CongurationEnter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must  be  exactly  the  same  as  on  the  wireless router.
29D-Link DWA-130 User ManualSection 3 - CongurationConnect to a Wireless NetworkUsing Windows® XPWindows® XP users may use the built-in wireless utility (Zero Conguration Utility). The following instructions are for Service Pack 2 users.  If you are using another company’s utility or Windows® 2000, please refer to the user manual of your wireless adapter for help with connecting to a wireless network. Most utilities will have a “site survey” option similar to the Windows® XP utility as seen below.Right-click on the wireless computer icon in your system tray (lower-right corner next to the time). Select View Available Wireless Networks.If you receive the Wireless Networks Detected bubble, click on the center of the bubble to access the utility.     orThe utility will display any available wireless networks in your area. Click on a network (displayed using the SSID) and click the Connect button.If  you  get  a  good  signal  but  cannot  access  the  Internet, check  you  TCP/IP  settings  for  your  wireless  adapter.  Refer to  the  Networking  Basics  section  in  this  manual  for  more information.
30D-Link DWA-130 User ManualSection 4 - Wireless SecurityWireless SecurityThis section will show you the different levels of security you can use to protect your data from intruders. The DWA-130 offers the following types of security:• WPA2 (Wi-Fi Protected Access 2)     • WPA2-PSK (Pre-Shared Key)• WPA (Wi-Fi Protected Access)      • WPA-PSK (Pre-Shared Key)• 802.1x (RADIUS)                          • WEP (Wired Equivalent Privacy)What is WEP?WEP stands for Wired Equivalent Privacy. It is based on the IEEE 802.11 standard and uses the RC4 encryption algorithm. WEP provides security by encrypting data over your wireless network so that it is protected as it is transmitted from one wireless device to another.To gain access to a WEP network, you must know the key. The key is a string of characters that you create. When using WEP, you must determine the level of encryption. The type of encryption determines the key length. 128-bit encryption requires a longer key than 64-bit encryption. Keys are dened by entering in a string in HEX (hexadecimal - using characters 0-9, A-F) or ASCII (American Standard Code for Information Interchange – alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be dened so that you can change keys easily.
31D-Link DWA-130 User ManualSection 4 - Wireless SecurityWhat is WPA?WPA, or Wi-Fi Protected Access, is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).  The 2 major improvements over WEP: • Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing algorithm and, by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is based on 802.11i and uses Advanced Encryption Standard instead of TKIP.• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP  regulates access  to a wireless  network based  on a computer’s  hardware-specic MAC address, which is relatively simple to be sniffed out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized network users can access the network.WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between 8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your wireless router or access point.WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network.
32D-Link DWA-130 User ManualSection 4 - Wireless SecurityCongure WEPUsing the D-Link Wireless Connection ManagerIt is recommended to enable WEP on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.1. Open the Wireless Utility by double-clicking on the D-Link icon in your system tray (lower-right corner of screen). From the list of available wireless networks, select the network you want to connect to and click Connect. If the network is using WEP, the screen (as shown to the left) will appear. 2. Enter the WEP key exactly as it is on your wireless router or access point.3. Click the Show text in the password eld box to see the WEP key. Unchecking it will hide the key.4. Click OK to connect to the network. Allow up to 30 seconds to connect.If you would like to create a new network and enter the WEP settings, refer to the next page.
33D-Link DWA-130 User ManualSection 4 - Wireless SecurityIt is recommended to enable WEP on your wireless router or access point before conguring your wireless adapter. make sure you enter the WEP key exactly the same on all wireless devices. It is strongly recommended to set the authentication to Shared Key.1. Open the Wireless Utility by double-clicking on the D-Link icon in your system tray (lower-right corner of screen). Click on New to create a new prole or highlight an existing prole and click Modify. 2. Select WEP under Set Security Option.3. Select Shared and then select the Key Length from the  drop-down menu. 4. Enter the WEP key exactly as it is on your wireless router or access point.5. Click OK to connect to the network. Allow up to 30 seconds to connect.
34D-Link DWA-130 User ManualSection 4 - Wireless SecurityCongure WEPUsing Windows® VistaIt is recommended to enable wireless security (WEP) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® Vista™ Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.
35D-Link DWA-130 User ManualSection 4 - Wireless Security3. Enter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
36D-Link DWA-130 User ManualSection 4 - Wireless SecurityCongure WEPUsing the Windows® XP UtilityIt is recommended to enable WEP on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WEP key being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® XP Wireless Utility by right-clicking on  the  wireless  computer  icon  in  your  system  tray  (lower-right  corner  of  screen).  Select  View  Available Wireless Networks.
37D-Link DWA-130 User ManualSection 4 - Wireless Security3. The Wireless Network Connection box will appear. Enter the WEP key and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection  fails,  please  verify  that  the  WEP  settings  are  correct. The WEP key must be exactly the same as on the wireless router or access point.
38D-Link DWA-130 User ManualSection 4 - Wireless SecurityCongure WPA/WPA2 PassphraseUsing the D-Link Wireless Connection ManagerIt is recommended to enable WPA-PSK on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WPA-PSK passphrase being used.1.  Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. 2.  Highlight the wireless network (SSID) you would like to connect to and click Connect. If the network is using WPA-PSK, the screen (as shown to the bottom-right) will appear. 3.  Enter  the  WPA-PSK  passphrase  exactly  as  it  is  on  your wireless router or access point. Click the Show text in the password eld box to see the passphrase. Unchecking it will hide it.4.  Click OK to connect to the network. Allow up to 30 seconds to connect.If you would like to create a new network and enter the WPA-PSK settings, refer to the next page.
39D-Link DWA-130 User ManualSection 4 - Wireless SecurityIt is recommended to enable WPA-PSK on your wireless router or access point before conguring your wireless adapter. Make sure you enter the passphrase exactly the same on all wireless devices.1.  Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. Click on New to create a new prole or highlight an existing prole and click Modify. 2.  Select WPA/WPA2-Personal under Set Security Option.3.  Select TKIP or AES. 4.  Enter the passphrase exactly as it is on your wireless router or access point.5.  Click OK to connect to the network. Allow up to 30 seconds to connect.
40D-Link DWA-130 User ManualSection 4 - Wireless SecurityCongure WPA/WPA2 PassphraseUsing Windows® VistaIt is recommended to enable wireless security (WPA/WPA2) on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.2. Highlight the wireless network (SSID) you would like to connect to and click Connect.1. Open the Windows® Vista™ Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network.
41D-Link DWA-130 User ManualSection 4 - Wireless Security3. Enter the same security key or passphrase that is on your router and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router.
42D-Link DWA-130 User ManualSection 4 - Wireless SecurityCongure WPA/WPA2 PassphraseUsing the Windows® XP UtilityIt is recommended to enable WPA-PSK on your wireless router or access point before conguring your wireless adapter. If you are joining an existing network, you will need to know the WPA-PSK key being used.2.  Highlight the wireless network (SSID) you would like to connect to and click Connect.1.  Open the Windows® XP Wireless Utility by right-clicking on  the  wireless  computer  icon  in  your  system  tray  (lower-right  corner  of  screen).  Select  View  Available Wireless Networks.
43D-Link DWA-130 User ManualSection 4 - Wireless Security3.  The Wireless Network  Connection  box  will  appear. Enter the WPA-PSK passphrase and click Connect.It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The  WPA-PSK  passphrase  must  be  exactly  the  same  as  on  the wireless router or access point.
44D-Link DWA-130 User ManualSection 4 - Wireless SecurityCongure WPA/WPA2 (RADIUS)Using the D-Link Wireless Connection ManagerWPA and WPA2 are for advanced users who are familiar with using a RADIUS server and setting up certicates.1. Open the Wireless Connection Manager by double-clicking on the D-Link icon on your desktop. Click on New to create a new prole or highlight an existing prole and click Modify. 2. Select WPA/WPA2-Enterprise under Set Security Option and then select TKIP or AES.3. Click on Advanced Cong to continue.4. Next to EAP Type, select EAP-TLS, EAP-TTLS, or PEAP. Extensible Authentication  Protocols  allow  devices  on  the  network  to  request authentication from the RADIUS server in the network. All the devices on the network must use the same EAP type when using a RADIUS server for authentication. Some RADIUS servers require that the Validate Server eld be selected. Check this eld if your RADIUS server requires validation.5. Select an User Certicate from the drop-down menu.6. Enter the login information required to authenticate.7. Click Add to enter the IP address(es) of your RADIUS servers.8. Click OK to save your settings.
45D-Link DWA-130 User ManualSection 5 - Troubleshooting1.  How do I know if my adapter is installed properly?Select the Hardware Tab.TroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation of the DWA-130.  Read the following descriptions if you are having problems.  (The examples below are illustrated in Windows® XP.  If you have a different operating system, the screenshots on your computer will look similar to the following examples.)Go to Start > My Computer > Properties.
46D-Link DWA-130 User ManualSection 5 - TroubleshootingClick the + sign next to Network Adapters.Right-click on D-Link DWA-130 USB Adapter.Select  Properties  to  check  that  the  drivers  are installed properly.Look under Device Status to check that the device is working properly. Click OK to continue.D-Link DWA-130 USB AdapterD-Link DWA-130 Wireless USB Adapter
47D-Link DWA-130 User ManualSection 5 - TroubleshootingMake sure that the DWA-130 Wireless USB Adapter is properly seated in the computer’s USB port.If Windows does not detect the hardware upon insertion of the adapter, make sure to completely remove drivers that were previously loaded. 2. The computer does not recognize the DWA-130 Wireless USB Adapter.• Check that the LED indicators for the broadband modem are indicating normal activity.  If not, there may be a problem with the broadband connection.• Check that the LED indicators on the wireless router are functioning properly.  If not, check that the AC power and Ethernet cables are rmly connected.•  Check  that  the  IP  Address,  subnet  mask,  gateway,  and  DNS  settings  are  correctly  entered  for  the network• In Infrastructure mode, make sure the same Service Set Identier (SSID) is specied on the settings for the wireless clients and access points.  The SSID factory default setting for D-Link products is default.  (Double-click on the WLAN icon in the taskbar. The Link Info screen will display the SSID setting.)3.  The computer with the DWA-130 installed is unable to connect to the wireless network and/or the Internet.
48D-Link DWA-130 User ManualSection 5 - TroubleshootingCheck that the Network Connection for the wireless client is congured properly.  Select AP (Infrastructure) when connecting to an access point.  Double-click on the WLAN icon in the taskbar > click on Conguration to change the settings for the wireless adapter.If Security is enabled, make sure that the correct encryption keys are entered on both the DWA-130 and the access point.  Double-click on the WLAN icon in the taskbar > click Encryption.  Check to see that the key selected is set to the same key as other devices on the network.
49D-Link DWA-130 User ManualAppendix A - Wireless BasicsD-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals instead of wires. Wireless LANs are used increasingly in both home and ofce environments, and public areas such as airports, coffee shops and universities. Innovative ways to utilize WLAN technology are helping people to work and communicate more efciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many users. Wireless users can use the same applications they use on a wired network.  Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards. Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN.  A Wireless Router is a device used to provide this link.Wireless Basics
50D-Link DWA-130 User ManualAppendix A - Wireless BasicsWhat is Wireless?Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio frequency to connect wirelessly, so you have the freedom to connect computers anywhere in your home or ofce network.Why D-Link Wireless?   D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.How does wireless work?   Wireless works similar to how cordless phone work, through radio signals to transmit data from one point A to point B. But wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area to be able to connect your computer. There are two different types of wireless networks Wireless Local Area Network (WLAN), and Wireless Personal Area Network (WPAN).Wireless Local Area Network (WLAN)In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access point as seen in the picture, the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, college and high school campuses, airports, golf courses, and many other
51D-Link DWA-130 User ManualAppendix A - Wireless Basicsoutdoor venues.Wireless Personal Area Network (WPAN)Bluetooth  is  the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30 feet away.Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as much power which makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other devices that operate on batteries.Who uses wireless?   Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, ofce, business, D-Link has a wireless solution for it.Home  • Gives everyone at home broadband access  • Surf the web, check email, instant message, and etc  • Gets rid of the cables around the house  • Simple and easy to use Small Ofce and Home Ofce  • Stay on top of everything at home as you would at ofce  • Remotely access your ofce network from home  • Share Internet connection and printer with multiple computers  • No need to dedicate ofce space
52D-Link DWA-130 User ManualAppendix A - Wireless BasicsWhere is wireless used?   Wireless technology  is expanding  everywhere  not just  at home  or ofce. People  like the  freedom of mobility and it’s becoming so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public places is usually called “hotspots”.Using a D-Link USB Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.Wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start. That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.TipsHere are a few things to keep in mind, when you install a wireless network.Centralize your router or Access Point  Make sure you place the router/access point in a centralized location within your network for the best performance. Try to place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a two-story home, you may need a repeater to boost the signal to extend the range.Eliminate Interference   Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would signicantly reduce any interference that the appliances might cause since they operate on same frequency.
53D-Link DWA-130 User ManualAppendix A - Wireless BasicsSecurity   Don’t let you next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on the WPA or WEP security feature on the router. Refer to product manual for detail information on how to set it up.     There are basically two modes of networking: • Infrastructure – All wireless clients will connect to an access point or wireless router.• Ad-Hoc  –  Directly  connecting  to  another  computer,  for  peer-to-peer  communication,  using  wireless network adapters on each computer. Unfortunately 802.11g/n products such as the DWA-130 do not support ad-hoc mode.An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc* network contains only clients, such as laptops with wireless USB Adapters. All the adapters must be in Ad-Hoc mode to communicate.Wireless Modes
54D-Link DWA-130 User ManualAppendix B - Networking BasicsNetworking BasicsCheck your IP addressAfter you install your new D-Link wireless adapter and have established a wireless connection, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. router) automatically. To verify your IP address, please follow the steps below.Windows® XP/2000 Users•  Click on Start > Run. In the run box type cmd and click OK.•  At the prompt, type ipconfig and press Enter.•  This will display the IP address, subnet mask, and the default gateway of your adapter.Windows Vista™ Users•  Click Start > All Programs > Accessories > Command Prompt. You may need administrative access to run this application.•  For all additional prompt windows inquiring of running the command prompt application, select Yes, OK, or Continue.•  At the prompt, type ipconfig and press Enter.•  This will display the IP address, subnet mask, and default gateway of your adapter.If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some rewall software programs may block a DHCP request on newly installed adapters.
55D-Link DWA-130 User ManualAppendix B - Networking BasicsStatically Assign an IP addressIf you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:Windows® XP/2000 Users•  Windows® XP - Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network Connections icon. Windows® 2000 – From the desktop, right-click My Network Places > Properties.•  Right-click on the Local Area Connection which represents your D-Link wireless network adapter (or other adapter) which will be connected to your router.•  Highlight Internet Protocol (TCP/IP) and click Properties.•  Click Use the following IP address and enter an IP address that is on the same subnet as your network or LAN IP address on your router. Example: If the router’s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. •  Set Default Gateway the same as the LAN IP address of your router or gateway.•  Set Primary DNS the same as the LAN IP address of your router or gateway. •  The Secondary DNS is optional (you may enter a DNS server from your ISP).•  Click OK to save your settings.
56D-Link DWA-130 User ManualAppendix B - Networking BasicsWindows Vista™ Users•  Click on Start > Control Panel. Make sure you are in Classic View. Double-click on the Network and Sharing Center icon. Along the left panel in the window, click on Manage network connections.•  Right-click on the Local Area Connection which represents your D-Link wireless network adapter which will be connected to your network.•  Highlight Internet Protocol Version 4 (TCP /IPv4) and click Properties.•  Click Use the following IP address and enter an IP address that is on the same subnet as your  network or  LAN IP  address on  your router  or network. Example:  If  the  router’s  LAN  IP  address  is  192.168.0.1,  make  your  IP address 192.168.0.X where X is a number between 2 and 99. Make sure that the number you choose is not in use on the network. •  Set Default Gateway the same as the LAN IP address of your router or gateway.•  Set  Primary  DNS  the  same  as  the  LAN  IP  address  of  your  router  or gateway. •  The Secondary DNS is optional (you may enter a DNS server from your ISP).•  Click OK to save your settings.
57D-Link DWA-130 User ManualAppendix C - Technical SpecicationsTechnical SpecicationsStandards • IEEE 802.11n (draft 2.0)  • IEEE 802.11g  • IEEE 802.11bBus Type  • USB 2.0 (1.1 compatible)Security  • WPA/WPA2 - Wi-Fi Protected Access  • 802.1x  • WPS (PIN and PBC)  • WEP Media Access Control  • CSMA/CA with ACKFrequency Range  • 2.4GHz to 2.4835GHz Power Consumption  • Tx: 260 mA  • Rx: 159 mAModulation Technology  • Orthogonal FrequencyDivision Multiplexing (OFDM)  • Complementary Code Keying (CCK)Transmitter Power Output  • 802.11b: 22.20 dBm  • 802.11g: 25.35 dBm  • draft 802.11n (20MHz): 25.37 dBm   • draft 802.11n (40MHz): 24.76 dBmOperating Voltage  • 5 VDC +/- 10%Operating Temperature  • 32°F to 104°F ( 0°C to 40°C) Operating Humidity  • 10% to 90% maximum (non-condensing)Dimensions  • 1.1” x 3.4” x 0.5”Weight  • 0.06 lbs (27.22g)* Maximum wireless signal rate derived from IEEE Standard 802.11n-draft and 802.11g specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trafc, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.Version 3.0March 11, 2009
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: -  Reorient or relocate the receiving antenna. -  Increase the separation between the equipment and receiver. -  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -  Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.  FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.  IEEE 802.11b or 802.11g operation of this product in the U.S.A. is firmware-limited to channels 1 through 11.  IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instruction as documented in this manual.  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.  SAR compliance has been established in typical laptop computer(s) with USB slot, and product could be used in typical laptop computer with USB slot. Other application like handheld PC or similar device has not been verified and may not compliance with related RF exposure rule and such use shall be prohibited.
Industry Canada Statement  This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device  IMPORTANT NOTE: IC Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with IC RF exposure compliance requirements, please follow operation instruction as documented in this manual.       以下警語適用台灣地區:  經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應立即停用,並改善至無干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Navigation menu