D Link WM112A1 802.16e-2005 WiMAX USB Adapter User Manual UserMan KA2WM112A1 revised

D Link Corporation 802.16e-2005 WiMAX USB Adapter UserMan KA2WM112A1 revised

Manual

Table of ContentsD-Link DWM-112 User Manual
Chapter 1 – Product OverviewD-Link DWM-112 User Manual 1Worldwide Interoperability for Microwave Access (WiMAX) is the 802.16 networking standard that wirelessly provides high bandwidth at long distances. D-Link DWM-112, with IEEE 802.16e-2005 standard, is a broadband wireless access (BWA) USB adapter. With simple configurations, you can wirelessly access high-speed Internet via the WiMAX base station (BS) of your Internet service provider (ISP) within its coverage area. Simply plug the D-Link DWM-112 Adapter into your USB, and get started.
Chapter 1 – Product OverviewD-Link DWM-112 User Manual 2Package Contents DWM-112 IEEE802.16e WiMAX USB adapter Extension cable System Requirements Computer with: At least one USB 2.0 port Windows XP/Vista WiMAX Utility Features Supports IEEE802.16e-2005 Wireless MAN-OFDMA and Wireless HUMAN air interface Visual graphic icon and signal strength for connecting and disconnecting WiMAX Radio on/off function for when traveling on an airplane or any location that prohibits radio usage EAP base authentication for security
Chapter 2 – OverviewD-Link DWM-112 User Manual 3Hardware Overview Power LED: A steady green light indicates that the WiMAX Adapter is ready for use.
Chapter 2 – OverviewD-Link DWM-112 User Manual 4Hardware Installation 1. Find an open USB port. 2. Insert the DWM-112 into the USB port. Note:Before You StartBefore starting installation of the device and utility, make sure that you have the following information obtained from your ISP: User name/Identity Password NAI. (If necessary) Frequency (If necessary) Note: WiMAX WiMAX
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 5The WiMAX Utility helps you to configure the settings of the WiMAX adapter. You may need to get the information from your Internet Service Provider (ISP) in order to connect to the Internet with the WiMAX Adapter. Installing the Utility Whwn you see the Found New hardware wizard appear,please click cancel.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 6Double-click on the Setup.exe file and the installationdialog will then box appear. Click Next to proceed. The Autorun program on the DWM-112 will launch and install the drivers automatically.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 7Click Install to start the installation. The process bar indicates that the installation is proceeding.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 8Chooes a type of wimax BS to customize Settings Click Continne Anyway to continue the installation
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 9If you select Launch WiMax Utility, the software will start after clicking Next. If No launch is selected, the software will not automatically start, and you can go to Start > Programs > D-Link > DWM-112 WiMAX Adapater, and select one of the WiMax Utility modes to start. Once, you will see an icon on the taskbar as shown below. Double-click on the D-Link icon to open up the WiMax Utility screen.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 10Accessing the WiMAX Utility (User mode) Click Start > Programs > D-Link > DWM-112 WiMAX Adapter > D-Link WiMAX Utility (User mode) to start the utility, or double-click – located in the taskbar – to start WiMAX Utility (User mode).Use WiMAX Utility Steps:1) Open the page of settings. Select “Add…” and enter a string to add a new operator’s settings.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 11
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 122) Press “Edit” to configure a set of settings for this operator, like authentication and channel settings. 3) Configure authentication settings. Consider to enable or disable authentication.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 13Check “Use NAI” if and only if you need to use EAPouter-identity.Press the Edit icon and enter an outer-identity stringin the proper field. In this example, the final outer-identity is {am=1}1234567890@wimax.net (Note: 1. WiMAX-decoration and Realm are optional.2. Identity should not include symbol ‘{‘, ‘}’, or ‘@’). 4) Configure WiMAX channel settings Press “+” to add new channels.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 145) If your authentication type (like TLLS/MSCHAPv2) needs user name and password, fill them in the page of settings.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 156) Press “Apply” to apply this operator’s settings and start a connection. Open the Scan page to scan WiMAX signals in the current operator’s channel list.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 16Press to connect or disconnect. Press to disable the device’s RF functions.
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 17
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 18For Advanced User
Chapter 3 – DWM Series WiMAX UtilityD-Link DWM-112 User Manual 19Click “Log” to open log windows. Contents are saved to2 log files in the program folder. Log files help developers analyze and debug problems. Both WiMAX bandwidth and frame duration are globalsettings.
Appendix B – Technical SpecificationsD-Link DWM-112 User Manual 20This function can help you find out correct frequencies of available WiMAX channels in your environment. Edit -> Channel List -> Explore new channels. Input a frequency range and press “Start Scan” to discover new channels.Once a new channel is discovered, you can “Stop Scan” and select it and add it to the operator’s Channel List.
Appendix B – Technical SpecificationsD-Link DWM-112 User Manual 21 2.5GHz radio front-end cover from 2.5GHz to 2.69GHz (NCC Frequencies 2.5025~2.6875GHz) Transmit power 23dBm Embedded antenna Support QPSK, 16QAM, 64QAM modulation (DL) Support TDD (Time Division Duplex) mode For profile 3A, support 5MHz and 10MHz bandwidth IEEE 802.16e-2005 USB 2.0 Power Support PKMv2 protocol, EAP-based authorization, EAP-TLS, EAP-TTLS. Device drivers: Windows XP/Vista
Appendix B – Technical SpecificationsD-Link DWM-112 User Manual 22Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ===== RF Exposure statement for mobile device without SAR measurement====== This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Appendix B – Technical SpecificationsD-Link DWM-112 User Manual 23This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Navigation menu