D Link WM158D1 DC-HSPA+USB ADAPTER User Manual DWM 158 UserManualx

Download:
Mirror Download [FCC.gov]
Document ID	1883303
Application ID	6JCQ+vNsjnbDIEyDupMi6A==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	27.82kB (347790 bits)
Date Submitted	2013-01-21 00:00:00
Date Available	2013-07-20 00:00:00
Creation Date	2017-10-28 17:06:35
Producing Software	GPL Ghostscript 9.18
Document Lastmod	2017-10-28 17:06:35
Document Title	Microsoft Word - DWM-158_UserManual.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	RoseWang

DC‐HSPA+ USB Adapter
DWM‐158
User Manual
Index
DC‐HSPA+ USB Adapter Introduction ............................2
Internet service .............................................................. 5
SMS service .................................................................... 6
Contacts ....................................................................... 10
Voice Call...................................................................... 13
USSD............................................................................. 14
Settings ........................................................................ 15
FAQs ............................................................................. 19
DC‐ HSPA+ USB ADAP TER INTRODUCTION
1.
To launch the Network Connect, double‐click the shortcut icon
on the desktop. It should be noted that:

If the PIN code enabled, enter the correct one, then click OK.
The (U)SIM will be locked after three retries of incorrect PIN
code inputting;

Enter the correct PUK to retrieve the default PIN code. After
ten retries of incorrect PUK code inputting, please contact with
your service provider;

2.
With the wrong PIN and PUK, all the network services are
unavailable.
Main interface introduction
: Connection
: Access to the Text Message
: Access to the Phonebook interface
：Access to Voice call interface
: Access to USSD
: Access to check usage statistics
: Set parameters options
: Help (User Manual)
3.
Status information
Status
New message
Message full
No device
Description
New message(s) arrived.
Indicates the (U)SIM’s storage of SMS
Indicates that system cannot find the
device.
Initializing
Indicates that the device is in the process
Searching
The device is searching for the network.
No service
No suitable network.
No (U)SIM card
Invalid (U)SIM card
(U)SIM card not inserted or the device
The (U)SIM is out of service.
Network signal
Network type
Data service
4.
Indicate the signal strength of
GSM/GPRS,
EDGE
UMTS.
available,
HSPA
LED Indicator description
State of LED indicator
Description
RED Solid On
No SIM card/ Error
Green Solid On
Register to network (not connect)
Green blinking
Connected to network
*Green blinking: Flash once every 0.5 seconds)
IN TERN ET SERVICE
1.
Connecting with the default connection profile

2.
Click
to set up the connection;
Statistics information
The following window will be displayed at lower right corner of
main interface when connecting to the internet.
3.
Disconnect from the internet
Click
connection.
to disconnect the internet
SMS SERVICE
Click
1.
to enter SMS (Short Message Service) service interface.
Creating and sending a message.
Click

Input the recipient number by one of the following
options:

Enter the number directly;

Click Send to, choose the recipient number from
the phonebook and add to the sending list , then
click OK.

Enter the message content;

Click Send or Save to Draft. The message will be saved in
the Draft when failed to send.
Note:

You can group send a message at most 100
recipients;

Each number should be separated by “,”;

2.
The message cannot expand 2,048 characters at most.
Inbox

The following prompt box will be displayed when
received a new message;

Reply
: Access the edit interface, write the content,
click Send or Save to Draft;

Forward

Delete
: Forward the selected message;
: Delete the selected message.
Note:
3.

The new message will be saved in PC when Connect
running only, else in (U)SIM instead.

You can use “Shift” or “Ctrl” to selected several
messages;
Outbox
The message in the Outbox can be deleted or forwarded.
4.
5.
Draft

The MSG sent unsuccessfully will be saved in the Draft .

Click the selected message;

Confirm the recipient and the content, and click Send or
Save to Draft.
Recycle
All deleted information will be saved in the Recycle.
6.
The selected SMS can be operated as follows:

Save number:
To save the sender’s information to the (U)SIM card or
PC.

Delete text message: To delete the selected message.

Move to:
To move the selected message to Outbox or Draft.

Copy to:
To copy the selected message to Outbox or Draft.

SMS Export

Right‐click the selected the message;

Click SMS Export ;

Specify the path and the file name, and click Save.
Note: The exported message will be saved as a *.csv file.
CON TA CTS
Click
1.
2.
to enter Contacts interface.
New

Click

Enter the Name and Mobile, and save it in the (U)SIM
card or PC.
Searching a contact

Click

Enter the key characters of you want to find in the

3.
The result will be displayed in turn.
Viewing a contact

Click Local or (U)SIM to display the contacts interface
accordingly;

Select a contact, then you can operate as follows:

Edit

Delete

Send SMS
contact;

Copy to: Copy the contact between (U)SIM card
and PC.
: Modify the selected contact;
: Delete the selected contact;
: Send a message to the selected
Note: The deleted contact information cannot be retrieved.
4.
5.
Import

Right‐click the mouse;

Click Contacts Import;

Select the *.vcf or *.csv

The import file will be saved in the current interface.
file and click Open;
Export

Right‐click the selected contact;

Click Contacts Export;

You can saved the contact file as *.csv file or *.vcf file;

Confirm the name and the path the file saved, then click
Save.
VOICE CALL
Click
1.
to enter voice call interface.
Dial operation
Enter voice call interface, you can enter the call number
by dial number pad, then click
to dial. When
connected, you can click volume button to adjust the
volume; when you click
, you can hang up the
current call.
2.
Incoming call operation
The following prompt box will be displayed when
incoming call.
Click “Answer” button to answer the call; Click “Hangup”
button to reject the call
USSD
Click
to enter USSD interface.
You can add, edit, delete, and send USSD operation. The
result of sending will display on the edit box.
SETTIN GS
Click
1.
to list the functions.
PIN Management

Enable PIN

Click Enable PIN;

Enter the correct PIN code and click OK.
Note: The PIN code should be a numeric string of
4‐8 digits.


Disable PIN

Click Disable PIN;

Enter the correct PIN code and click OK.
Modify PIN

Click Modify PIN;

Enter the old PIN code and new PIN code, confirm
the new PIN code and click OK.
2.
Options (also can use

General
You may choose the alert tone when
connected/disconnected to the internet.

Text Message Setting

You may active the message alert tone, and also
can set up your favorite tone via selecting a *.wav
file in the PC.

The number showed in the SMS center is read
from the (U)SIM card automatically; modification is
not recommended;
Note: SMS would not work with the wrong SMSC.
Contact with the service provider to get the correct
SMSC. You may select the period in the drop‐box, it
specifies the validity which the message would
save in the network;
Note: The validity setting of SMS should be supported by
the network.

Network

Network Type

You can choose Auto or Only UMTS/HSPA
or Only GPRS/EDGE. The device will register
network according to the selected mode.


The default mode is Auto.
Registration Mode

Auto search and register is set as default
value;

Select Manual search and register before
dialing, available networks will be listed
when finished;

Select an available network and click
Register, and then the device will try to
register.

Statistics

You can get the statistics of
daily/weekly/monthly/yearly report on
downloading/uploading/connection time

Diagnostic

Language Selection

You can choose the different language UI
3.
Contacts Import
For more details, refer to Internet Contacts‐4.
4.
Contacts Export
For more details, refer to Internet Contacts‐5.
5.
SMS Export
For more details, refer to Internet Text Message‐5.
6.
7.
Help &About

Help: To open the User Manual

About: To get the Connection Manager information.
Show Menu Bar
You can display/not display the Menu Bar
FAQS
1. Q: What shall I do if I cannot connect to the internet?
A: Checking
Setting and check the Profile is correct to
match the (U)SIM card operator. If not, can manual to enter the
APN information to connect to the internet.
2. Q: Why can’t I receive the message?
A: Please confirm whether the (U)SIM’s SMS memory is full or
not.
3. Q: Why the software doesn’t run automatically when the device
is plugged in?
A: Click My computer‐>data card disk‐>StartModem.exe. Or run
the Connection Manager from Start of the OS if D‐Link
Connection Manager was installed.
CE WARN IN G:
Users have to use the connection to USB interfaces with USB 2.0
version or higher.
Please make sure the temperature for device will not be higher than
45 ˚C
The device is tested for typical body worn operation. The minimum
distance between the user and/or any bystander and the radiating
structure of the transmitter is 1.0cm.
Declaration of Conformity
We, D‐Link Corporation,
Address: No.289, Sinhu 3rd rd., Neihu District, Taipei City 114, Taiwan
Declare under our own responsibility that the product:
Model: DWM‐158
Intended use: DC‐HSPA+ USB Adapter
Complies with the essential requirements of Article 3 of the R&TTE
1999/5/EC Directive, if used for its intended use and that the
following standards have been applied:
1.
Health (Article 3.1(a) of the R&TTE Directive)

2.
EN 62311: 2008/ EN 62209‐2:2010
Safety (Article 3.1(a) of the R&TTE Directive)
Applied Standard(s):

EN 60950‐1:2006+A11:2009+A1:2010+A12:2011
3.
Electromagnetic compatibility (Article 3.1 (b) of the R&TTE
Directive)
Applied Standard(s):

EN 301 489‐1 V1.9.2/‐7 V1.3.1/‐24 V1.5.1
4.
Radio frequency spectrum usage (Article 3.2 of the R&TTE
Directive)
Applied Standard(s):

EN 301 511 V9.0.2

EN 301 908‐1 V5.2.1/ ‐2 V5.2.1
All the reports of the applied standards have the Positive Opinion of
Notified Body:
PHONEIX TESTLAB, Königswinkel 10 D‐32825 Blomberg, Germany
FCC WA RN IN G:
FCC Regulations:
This device has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiated radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
‐Reorient or relocate the receiving antenna.
‐Increase the separation between the equipment and receiver.
‐Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate
the equipment.
The antenna(s) used for this transmitter must not be co‐located or
operating in conjunction with any other antenna or transmitter.
4RF EXPOSURE INFORMATION (SAR)
This device meets the government’s requirements for exposure to
radio waves. This device is designed and manufactured not to exceed
the emission limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of
measurement known as the Specific Absorption Rate, or SAR. The
SAR limit set by the FCC is 1.6W/kg. *Tests for SAR are conducted
using standard operating positions accepted by the FCC with the
device transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the highest
certified power level, the actual SAR level of the device while
operating can be well below the maximum value. This is because the
device is designed to operate at multiple power levels so as to use
only the poser required to reach the network. In general, the closer
you are to a wireless base station antenna, the lower the power
output. SAR compliance has been established in the host product(s)
(laptop computers), tested at 5mm separation distance and tested
with USB slot configurations including Horizontal‐UP,
Horizontal‐Down, Vertical‐Front, Vertical‐Back. This device can be
used in host product(s) with substantially similar physical dimensions,
construction, and electrical and RF characteristics. The highest SAR
value, tested per FCC RF exposure guidelines for USB dongle, as
described in this user guide, is 0.71 W/kg. The FCC has granted an
Equipment Authorization for this device with all reported SAR levels
evaluated as in compliance with the FCC RF exposure guidelines. SAR
information on this device is on file with the FCC and can be found
under the Display Grant section of www.fcc.gov/oet/ea/fccid after
searching on FCC ID: KA2WM158D1.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Extract, Print high-res
Author                          : RoseWang
Create Date                     : 2013:01:07 16:49:29+08:00
Modify Date                     : 2013:01:07 16:49:54+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2013:01:07 16:49:54+08:00
Producer                        : Acrobat Distiller 9.5.2 (Windows)
Format                          : application/pdf
Title                           : Microsoft Word - DWM-158_UserManual.docx
Creator                         : RoseWang
Document ID                     : uuid:fa59530c-25c6-4e29-b219-400a78d43e80
Instance ID                     : uuid:dc34dd7b-65f0-40c9-afa1-ebf8ae12d6d5
Page Count                      : 26

EXIF Metadata provided by EXIF.tools