D Link WR755A1 HSPA+ 3G VPN Router User Manual Manual P A 60

D Link Corporation HSPA+ 3G VPN Router Manual P A 60

Contents

Manual_P.A-60

Version 1.0 | 02/21/2014DWR-755User ManualHSPA+ 3G VPN Router
iD-Link DWR-755 User ManualD-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes.Manual RevisionsTrademarksD-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App StoreSM is a service mark of Apple Inc.Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc.Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.Copyright © 2014 by D-Link Corporation, Inc.All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.The purpose of this product is to create a constant network connection for your devices. As such, it does not have a standby mode or use a power management mode. If you wish to power down this product, please simply unplug it from the power outlet. Revision Date Description1.0 February 21, 2014 • Initial releasePreface
iiD-Link DWR-755 User ManualTable of ContentsPreface ................................................................................. iManual Revisions ........................................................................... iTrademarks ...................................................................................... iProduct Overview .............................................................. 1Package Contents ......................................................................... 1System Requirements ................................................................. 2Introduction ................................................................................... 3Features ............................................................................................ 4Hardware Overview ..................................................................... 5Rear Panel ................................................................................ 5Front Panel .............................................................................. 6LEDs ........................................................................................... 7Installation ......................................................................... 8Before you Begin ........................................................................... 8Wireless Installation Considerations ......................................9Conguration ...................................................................10Web-based Conguration Utility ..........................................10Setup ...............................................................................................11Internet Connection Setup Wizard ............................... 12Manual Internet Connection Setup .............................14Static (assigned by ISP) ................................................14Dynamic IP (DHCP) ........................................................15PPPoE .................................................................................16PPTP ....................................................................................17L2TP ....................................................................................183G ........................................................................................19GRE Settings .........................................................................21Wireless Settings .................................................................22Wireless Connection Setup Wizard..........................22Manual Wireless Connection Setup ........................25Network Settings ................................................................30DHCP Server Settings ...................................................31IPv6 ..........................................................................................32Static IPv6 .........................................................................33LAN IPv6 Address Settings .........................................34PPPoE .................................................................................35LAN IPv6 Link-Local Address ......................................366 to 4 ...................................................................................376rd .......................................................................................38Autoconguration .........................................................39Message Service .................................................................. 40SMS Inbox .........................................................................40Create Message ..............................................................41USSD ........................................................................................42VPN Settings .........................................................................43VPN Setup Wizard ..........................................................43Manual VPN Setup .............................................................. 45VPN Dynamic IP ..............................................................46Tunnel - IKE .......................................................................48Tunnel - Manual .............................................................. 51Table of Contents
iiiD-Link DWR-755 User ManualTable of ContentsAdvanced ......................................................................................53Virtual Server ........................................................................53Application Rules ................................................................54QoS Engine............................................................................55MAC Address Filter .............................................................56URL Filter ................................................................................57Outbound Filter ................................................................... 58Inbound Filter ......................................................................59SNMP .......................................................................................60Routing ...................................................................................61Advanced Wireless .............................................................62Advanced Network ............................................................64Network Scan .......................................................................65DMZ .........................................................................................66Tools ................................................................................................67Admin .....................................................................................67Time .........................................................................................68Syslog ......................................................................................69Email Settings ......................................................................70System ....................................................................................71Firmware ................................................................................72Dynamic DNS .......................................................................73System Check .......................................................................74Schedules ..............................................................................75PIN Control ............................................................................76Status ..............................................................................................77Device Info ............................................................................77Log ...........................................................................................78Statistics .................................................................................79Wireless ..................................................................................80IPv6 Status .............................................................................81Support ..........................................................................................82Connecting a Wireless Client ..........................................83WPS Button ...................................................................................83Windows® 8 ................................................................................... 84WPA/WPA2 ............................................................................84Windows® 7 ................................................................................... 86WPA/WPA2 ............................................................................86WPS ..........................................................................................89Windows Vista® ............................................................................ 93WPA/WPA2 ............................................................................94Windows® XP ................................................................................ 96WPA/WPA2 ............................................................................97Troubleshooting ..............................................................99Wireless Basics ...............................................................103What is Wireless? ...................................................................... 104Tips ................................................................................................ 106Wireless Modes ......................................................................... 107Networking Basics .........................................................108Check your IP address ............................................................ 108Statically Assign an IP address ............................................ 109Technical Specications ................................................110
1D-Link DWR-755 User ManualSection 1 - Product OverviewProduct OverviewPackage ContentsNote: Using a power supply with a dierent voltage rating than the one included with the DWR-755 will cause damage and void the warranty for this product.If any of the above items are missing, please contact your reseller.DWR-755 HSPA+ 3G VPN RouterEthernet CableDetachable AntennaPower Adapter
2D-Link DWR-755 User ManualSection 1 - Product OverviewNetwork Requirements• An Ethernet-based cable or DSL modem• IEEE 802.11n, 802.11g, or 802.11b wireless clients• 10/100 Ethernet• A compatible (U)SIM card with service.**Subject to services and service terms available from your carrier.Web-based Conguration Utility RequirementsComputer with the following:• Windows®, Macintosh, or Linux-based operating system • An installed Ethernet adapterBrowser Requirements:• Internet Explorer 6 or higher• Firefox 3.0 or higher• Safari 3.0 or higher• Chrome 2.0 or higherWindows® Users: Make sure you have the latest version of Java installed. Visit www.java.com to download the latest version.System Requirements
3D-Link DWR-755 User ManualSection 1 - Product OverviewIntroductionThe D-Link DWR-755 is a 802.11n/g/b compliant device that delivers real world performance of up to 14x faster than an 802.11g wireless connection (also faster than a 100 Mbps wired Ethernet connection). Create a secure wireless network to share photos, les, music, video, printers, and network storage throughout your home. Connect the DWR-755 router to a cable or DSL modem and share your high-speed Internet access with everyone on the network. In addition, this router includes a Quality of Service (QoS) engine that keeps digital phone calls (VoIP) and online gaming smooth and responsive, providing a better Internet experience.
4D-Link DWR-755 User ManualSection 1 - Product Overview• Ultimate Performance - The D-Link DWR-755 delivers real world performance of up to 14x faster than an 802.11g wireless connection so you can stream photos, music, and videos smoothly throughout your home.• Extended Whole Home Coverage - Powered by Wireless N technology, this high performance router provides superior Whole Home Coverage while reducing dead spots. The router is designed for use in bigger homes and for users who demand higher performance networking. Add a Wireless N notebook or desktop adapter and stay connected to your network from virtually anywhere in your home.• Total Network Security - The Wireless N router supports all of the latest wireless security features to prevent unauthorized access, be it from over the wireless network or from the Internet. Support for WPA/WPA2 standards ensures that you’ll be able to use the best possible encryption method, regardless of your client devices. In addition, this router utilizes dual active rewalls (SPI and NAT) to prevent potential attacks from across the Internet.• Quality of Service (QoS) - For smooth, uninterrupted streaming, this router includes a Quality of Service (QoS) engine that prioritizes according to data type so your digital phone calls (VoIP) and online gaming stay smooth and responsive.* Maximum wireless signal rate derived from IEEE Standard 802.11b, 802.11g and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely aect wireless signal range.Features
5D-Link DWR-755 User ManualSection 1 - Product OverviewHardware OverviewRear Panel1LAN Ports (1-4) Connect Ethernet devices such as computers, switches, and NAS.2WAN Port The auto MDI/MDIX Internet port connects to your cable or DSL modem via an Ethernet cable.3SIM Accepts a standard (U)SIM card for 2G/3G connectivity.4Power Receptor Connects to the included power adapter.5Power Switch Turns the device on or o.21 43 5
6D-Link DWR-755 User ManualSection 1 - Product OverviewHardware OverviewFront Panel121Reset Press this button for 10 seconds with an unfolded paperclip to reset the device.2WPS Press this button to initiate a new WPS connection. Refer to “Add Wireless Device with WPS” on page 24 for more details.
7D-Link DWR-755 User ManualSection 1 - Product OverviewHardware OverviewLEDs1Signal StrengthBlinking Red: No SIM card / signal or unveried PIN codeSolid Red: Signal strength is at level one (weak)Solid Amber: Signal strength is at level two or three (medium)Solid Green: Signal strength is at level four or ve (strong)2WAN Solid Green: Ethernet connection has been establishedBlinking Green: Data is being transferred3LAN (1-4) Solid Green: Ethernet connection has been establishedBlinking Green: Data is being transferred4Status Blinking Green: Device is working52G Solid Green: EDGE or GPRS connection has been establishedBlinking Green: Data is being transferred via 2G63G Solid Green: UMTS/HSDPA/HSUPA/HSPA+ connection is establishedBlinking: Data is being transferred via 3G7SMS Solid Green: SMS storage is fullBlinking Green: There is an unread SMS8WLAN Solid Green: WLAN is active and availableBlinking Green: Data is being transferred via WLAN12 34 5 6 7 8
8D-Link DWR-755 User ManualSection 2 - InstallationInstallationThis section will guide you through the installation process. Placement of the router is very important. Do not place the router in an enclosed area such as a closet, cabinet, or in an attic or garage.Before you Begin1. Ensure that your DWR-755 is disconnected and powered o.2. Insert a standard (U)SIM card into the SIM card slot on the back of the router as indicated by the SIM card logo next to the slot. The gold contacts should face downwards. Caution: Always unplug/power down the router before installing or removing the SIM card. Never insert or remove the SIM card while the router is in use.3. Connect the power adapter to the socket on the back panel of your DWR-755. Plug the other end of the power adapter into a wall outlet or power strip and turn the device on. a. The Status LED will light up to indicate that power has been supplied to the router. b. The LEDs on the front panel will ash on and o as the DWR-755 performs initialization and Internet connection processes.
9D-Link DWR-755 User ManualSection 2 - InstallationWireless Installation ConsiderationsThe D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the operating range of your wireless network. Keep in mind, however, that the number, thickness and location of walls, ceilings, or other objects that the wireless signals must pass through, may limit the range. Typical ranges vary depending on the types of materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to follow these basic guidelines:1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.2. Be aware of the direct line between network devices. A wall that is 1.5 feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better reception.3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors, le cabinets, brick, and concrete will degrade your wireless signal.4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or appliances that generate RF noise.5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone in not in use.
10D-Link DWR-755 User ManualSection 3 - CongurationCongurationThis section will show you how to congure your new D-Link mobile router using the web-based conguration utility.Web-based Conguration UtilityTo access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (http://192.168.0.1).Type Admin and then enter the password. By default, the password is blank.If you get a Page Cannot be Displayed error, please refer to “Troubleshooting” on page 56 for assistance.The conguration utility will open to the STATUS > DEVICE INFO page. You can view dierent conguration pages by clicking on the categories at the top of the screen (SETUP/ADVANCED/TOOLS/STATUS/SUPPORT), and then selecting a conguration page from the bar on the left side.The following pages will describe each section in detail, starting with the SETUP pages.
11D-Link DWR-755 User ManualSection 3 - CongurationThe setup wizard guides you through the initial setup of your router. There are two ways to setup your Internet connection. You can use the web-based Internet Connection Setup Wizard or you can manually congure using the Manual Internet Connection Setup wizard.Click Internet Connection Setup Wizard to begin.If you want to enter your settings without running the wizard, click Manual Internet Connection Setup and refer to “Manual Internet Connection Setup” on page 14.Setup
12D-Link DWR-755 User ManualSection 3 - CongurationCreate a new password and then click Next to continue.Select the Internet connection type you use. The connection types are explained on the following page. If you are unsure which connection type you should use, contact your Internet Service Provider (ISP).Click Prev to go back to the previous page or click Cancel to close the wizard.Note: The DWR-755 has a WAN failover feature that allows the router to switch to a 2G/3G connection if the WAN connection is down or unavailable.Select your time zone from the drop-down box and then click Next to continue.This wizard will guide you through a step-by-step process to congure your router to connect to the Internet.Click Next to continue.Note: While using the wizard, you can click Prev to go back to the previous step, or you can click Cancel to close the wizard.Internet Connection Setup Wizard
13D-Link DWR-755 User ManualSection 3 - CongurationChoose this if your Internet connection automatically provides you with an IP address. Most cable modems use this type of connection. See “Dynamic IP (DHCP)” on page 15 for information about how to congure this type of connection.Choose this option if your Internet connection requires a username and password to connect. Most DSL modems use this style of connection. See “PPPoE” on page 16 for information about how to congure this type of connection.Choose this option if your Internet connection requires Point-to-Point Tunneling Protocol (PPTP). See “PPTP” on page 17 for information about how to congure this type of connection.Choose this option if your Internet connection requires Layer 2 Tunneling Protocol (L2TP). See “L2TP” on page 18 for information about how to congure this type of connection.Choose this connection if you have installed a SIM card into the DWR-755. See “3G” on page 19 for information about how to congure this type of connection.Choose this option if your Internet Service Provider provided you with IP address information that has to be manually congured. See “Static (assigned by ISP)” on page 14 for information about how to congure this type of connection.DHCP Connection (Dynamic IP Address):Username / Password Connection (PPPoE):Username / Password Connection (PPTP):Username / Password Connection (L2TP):3G Connection: Static IP Address Connection:The subsequent conguration pages will dier depending on the selection you make on this page.After entering the requested information,click Next to continue.Note: If you are not sure what connection type to use or what settings to enter, check with your Internet Service Provider.This completes the Internet Connection Setup Wizard. Click Connect to save your changes and reboot the router.
14D-Link DWR-755 User ManualSection 3 - CongurationThis will display the failover Internet type, if available.Enter the IP address assigned by your ISP.Enter the Subnet Mask assigned by your ISP.Enter the Gateway assigned by your ISP.The DNS server information will be supplied by your ISP (Internet Service Provider.)Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1500 is the default MTU.The default MAC address is set to the Internet port’s physical interface MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.Failover Internet Type Is:IP Address:Subnet Mask:Default Gateway:DNS Servers:MTU:MAC Address:Manual Internet Connection SetupStatic (assigned by ISP)Select Static IP Address if all the Internet port’s IP information is provided to you by your ISP. You will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to you by your ISP. Each IP address entered in the elds must be in the appropriate IP form, which are four octets separated by a dot (x.x.x.x). The router will not accept the IP address if it is not in this format. After modifying any settings, click Save Settings to save your changes.
15D-Link DWR-755 User ManualSection 3 - CongurationDynamic IP (DHCP)This section will help you to obtain IP address information automatically from your ISP. Use this option if your ISP didn’t provide you with IP address information and/or a username and password. After modifying any settings, click Save Settings to save your changes.(Optional) Fill in the host name of your DNS server.(Optional) Fill in with IP address of the primary DNS server.(Optional) Fill in with IP address of the secondary DNS server.You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default value is 1500.The default MAC address is set to the Internet port’s physical interface MAC address on the broadband router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone button to replace the Internet port’s MAC address with the MAC address of your PC.This feature enables this product to renew the WAN IP address automatically when the lease time has expired.Host Name:Primary DNS Server: Secondary DNS Server: MTU (Maximum Transmission Unit):MAC Address: Auto-reconnect:
16D-Link DWR-755 User ManualSection 3 - CongurationPPPoEChoose this Internet connection if your ISP provides you with a PPPoE account. After modifying any settings, click Save Settings to save your changes.The username/account name that your ISP provides to you for PPPoE dial-up.Password that your ISP provides to you for PPPoE dial-up.Re-type your password in this eld. Fill in if provided by your ISP. (Optional)Fill in if provided by your ISP. If not, keep the default value.Fill in if provided by your ISP. If not, keep the default value (optional).Fill in if provided by your ISP. If not, keep the default value (optional).MAC address of WAN interface. You can also copy MAC address of your PC to its WAN interface by clicking the Clone button. The amount of time of inactivity before disconnecting an established PPPoE session. Set it to zero or enable auto-reconnect to disable this feature. Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specic ISP. 1492 is the default MTU.The device will automatically reconnect to your PPPoE connection automatically.Username: Password: Verify Password:Service Name:IP Address: Primary DNS Server: Secondary DNS Server:MAC Address:Maximum Idle Time:MTU:Auto-reconnect:
17D-Link DWR-755 User ManualSection 3 - CongurationPPTPChoose Static IP only if your ISP assigns you an IP address. Otherwise, please choose Dynamic IP.Enter the information provided by your ISP (Only applicable for Static IP PPTP).Enter the information provided by your ISP (Only applicable for Static IP PPTP).Enter the information provided by your ISP (Only applicable for Static IP PPTP).IP address of PPTP server.User/account name that your ISP provides to you for PPTP dial-up.Password that your ISP provides to you for PPTP dial-up.Re-enter your password for verication.Choose Always-on when you want to establish PPTP connection all the time. If you choose Connect-on-demand, the device will establish a PPTP connection when local users want to connect to the Internet, and disconnect if there is no trac after the time period dened by the Maximum Idle Time setting.The time of no activity to disconnect your PPTP session. Set it to zero or choose Always-on to disable this feature.Address Mode: PPTP IP Address: PPTP Subnet Mask: PPTP Gateway IP Address:PPTP Server IP Address:Username:Password:Verify Password:Reconnect Mode:Maximum Idle Time:Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Click Save Settings to save your changes.
18D-Link DWR-755 User ManualSection 3 - CongurationL2TPChoose this Internet connection if your ISP provides you with an L2TP account. After modifying any settings, click Save Settings to save your changes.Choose Static IP only if your ISP assigns you an IP address. Otherwise, please choose Dynamic IP. Enter the information provided by your ISP (Only applicable for Static IP L2TP).Enter the information provided by your ISP (Only applicable for Static IP L2TP).Enter the information provided by your ISP (Only applicable for Static IP L2TP).IP address of L2TP server. User/account name that your ISP provides to you for L2TP dial-up.Password that your ISP provides to you for L2TP dial-up.Re-type your password in this eld.Choose Always-on when you want to establish L2TP connection all the time. If you choose Connect-on-demand the device will establish L2TP connection when local users want to use Internet, and disconnect if no trac after time period of Maximum Idle Time.The time of no activity to disconnect your L2TP session. Set it to 0 or choose Always-on to disable this feature.Address Mode: L2TP IP Address: L2TP Subnet Mask: L2TP Gateway IP Address:L2TP Server IP Address:Username:Password:Verify Password:Reconnect Mode:Maximum Idle Time:
19D-Link DWR-755 User ManualSection 3 - CongurationSelect Auto-Detection to have the router automatically detect the settings for your connection. Select Manual to enter the details of your connection manually. Select your country and service provider to automatically ll in some of the required settings.Choose between WCDMA/HSPA or CDMA2000/EV-DO.Fill in only if requested by ISP (optional).Fill in only if requested by ISP (optional).Re-type your password.Enter the number to be dialed.Select PAP, CHAP, or Auto detection. The default authentication method is Auto. Enter the APN information (optional).Enter the PIN associated with your SIM card.Select Auto or Manual to determine whether the router should reconnect to your 3G/4G network automatically or manually.Dial Up Prole:Country/Telecom:3G Network Username:Password:Verify Password:Dialed Number:Authentication: APN:Pin Code:Reconnect Mode:3GChoose this Internet connection if you already use a SIM card for 2G/3G Internet service from your mobile Internet service provider. The elds here may not be necessary for your connection. The information on this page should only be used if required by your service provider. After modifying any settings, click Save Settings to save your changes.
20D-Link DWR-755 User ManualSection 3 - CongurationSet the maximum time your connection can be idle before disconnecting. Set it to 0 or choose Auto in Reconnect Mode to disable this feature.Fill in if provided by your ISP. If not, keep the default value (optional).Fill in if provided by your ISP. If not, keep the default value (optional).Select Disable or Use Ping depending on the settings required by your ISP. If you select Use Ping, set the ping interval and the IP address to ping.Activate this feature to use the Ethernet WAN port as an additional LAN port.Maximum Idle Time: Primary DNS Server:Secondary DNS Server:Keep Alive:Bridge Ethernet Ports:
21D-Link DWR-755 User ManualSection 3 - CongurationGRE SettingsThis page allows you to set up GRE Tunnels and view information about the amount of data transmitted and received. Generic Routing Encapsulation (GRE) is an IP packet encapsulation protocol used when IP packets must be sent from one network to another. Click Save Settings to apply changes.Choose a name for the GRE tunnel.Enter the IP address for the tunnel.Enter a Peer IP for the tunnel.Dene a key.Set the time to live for the GRE tunnel.Enter the subnet address.Check this box to enable the individual GRE tunneling rule.Choose a gateway from the drop-down menu (if any).Update the information on current GRE tunnels.Name:Tunnel IP:Peer IP:Key:TTL:Subnet:Enable:Default Gateway:Refresh:
22D-Link DWR-755 User ManualSection 3 - CongurationWireless SettingsWireless Connection Setup WizardThis section will help you to manually congure the wireless settings of your router. Please note that changes made in this section may also need to be duplicated on your wireless devices and clients. The Wireless Settings page allows you to congure how your router connects to the Internet. There are several ways to set up your wireless connection. You can click on the Wireless Connection Setup Wizard button to start a wizard that will guide you through setting up your wireless settings. If you want to manually congure your settings, click the Manual Wireless Connection Setup button and skip to “Manual Wireless Connection Setup” on page 25. You can also set up a wireless connection to a device automatically, or congure your router automatically through Windows by clicking the Wi-Fi Protected Setup button. This is described in “Add Wireless Device with WPS” on page 24.This wizard will guide you through a step-by-step process to congure your router’s wireless settings.Click Next to continue.Note: While using the wizard, you can click Prev to go back to the previous page or you can click Cancel to close the wizard.Enter a name (SSID) for your wireless network, then click Next to continue.Select a level of wireless security to use, then click Next to continue.
23D-Link DWR-755 User ManualSection 3 - CongurationIf you chose BEST or BETTER, select whether to use TKIP or AES encryption, then enter a password to use for your wireless network. It is recommended that you use AES if your wireless computers and devices support it, as it is more secure. Click Next to continue.If you chose GOOD, select whether to use a HEX or ASCII password, then enter a password to use for your wireless network. If you choose HEX, you will need to enter a 10 or 26 digit password using only hex characters (0-9, A-F). If you choose ASCII, the password must be 5 or 13 alphanumeric characters. Click Next to continue.This completes the Wireless Connection Setup Wizard. Click Save to save your changes and reboot the router.
24D-Link DWR-755 User ManualSection 3 - CongurationAdd Wireless Device with WPSEnable the Wi-Fi Protected Setup feature. A PIN is a unique number that can be used to add the router to an existing network or to create a new network. Pushing this button will generate a new, random PIN.Choose either Enrollee or Registrar from the drop-down menu.Press Set to switch between Congured and Uncongured states.Check this button to use the Push Button method only.Select Push Button or PIN method from the drop-down menu. For the Push Button method, to add a wireless client simply push the WPS button on the device and click Trigger. In order to use the PIN method you must know the wireless client’s 8 digit PIN and click Trigger.Note: Once you click Trigger, you will have a 120 second time limit to apply the settings to your wireless client(s) and successfully establish a connection.Indicates whether WPS is In Use or Not In Use. The Trigger button will activate WPS for up to 120 seconds.WPS:AP PIN:Cong Mode:Cong Status:Disable WPS-PIN Method:Cong Method:WPS Status:Wi-Fi Protected Setup (WPS) System is a simplied method for securing your wireless network during the initial setup as well as the “Add New Device” processes. The Wi-Fi Alliance (WFA) has certied it across dierent products as well as manufacturers. The process is just as easy as pressing a button for the Push-Button method or correctly entering the 8-digit code for the Pin Code method. The time reduction in setup and ease of use are quite benecial, while the highest wireless Security setting of WPA2 is automatically used.
25D-Link DWR-755 User ManualSection 3 - CongurationCheck this box to enable wireless access. When you enable this option, the following parameters take eect.Also known as the SSID (Service Set Identier), this is the name of your Wireless Local Area Network (WLAN). Enter a name using up to 32 alphanumeric characters. The SSID is case-sensitive.B/G mixed: Enable this mode if your network contains a mix of 802.11b and 802.11g devices.N only: Enable this mode if your network only has 802.11n devices.B/G/N mixed: Enable this mode if you have a mix of 802.11n, 802.11g, and 802.11b clients.Enabling this feature will allow the router to automatically scan for the best wireless channel to use. A wireless network uses specic channels in the wireless spectrum to handle communication between clients. Some channels in your area may experience interference from other electronic devices. Choose the clearest channel to help optimize the performance and coverage of your wireless network, or enable Auto Channel Scan for the router to automatically select the best channel.This setting determines whether the SSID will be Visible or Invisible to wireless clients looking for wireless networks. Setting this to Invisible can increase the security of your network by making it undetectable, but clients will need to manually enter the SSID of your network to connect.Enable Wireless:Wireless Network Name: 802.11 Mode: Auto Channel Scan:Wireless Channel:Visibility Status:Manual Wireless Connection SetupThis page lets you set up your wireless network and choose a wireless security mode. After modifying any settings, click Save Settings to save your changes.
26D-Link DWR-755 User ManualSection 3 - CongurationYou can choose from 4 dierent security modes.• None: No security will be used. This setting is not recommended.• WEP: WEP encryption will be used. This setting is only recommended if your wireless devices do not support WPA or WPA2.• WPA-Personal: WPA-PSK encryption will be used. This setting is recommended for most users.• WPA-Enterprise: WPA-EAP encryption will be used. This setting is only recommended if you have a RADIUS authentication server. Otherwise, WPA-Personal should be used.Security Mode:
27D-Link DWR-755 User ManualSection 3 - CongurationSelect whether to use Open or Shared authentication.Select whether to use 64-bit or 128-bit encryption.Select which WEP key (1-4) to use as the default key. This will also change the WEP Key text box to that WEP key for you to congure(1-4).Set the WEP key/password for your wireless network. Based on whether you are using 64 or 128-bit encryption, and whether you are using a HEX or ASCII key, you will need to enter dierent numbers of characters for your key, as indicated below the WEP Key text box. ASCII keys may use letters and numbers only, and HEX keys may use numbers 0-9 and letters A-F only.Authentication:WEP Encryption:Default WEP Key:WEP Key:WEP
28D-Link DWR-755 User ManualSection 3 - CongurationSelect whether to use WPA2 only or WPA only. WPA2 only is the most secure, provided that all of your clients can support it.Select whether to use the TKIP or AES cipher. The AES cipher is the most secure, provided that all of your clients can support it.Enter the key/password you want to use for your wireless network. The key must be between 8 and 63 characters long, and may only contain letters and numbers.WPA Mode:Cipher Type:Network Key:WPA-Personal
29D-Link DWR-755 User ManualSection 3 - CongurationSelect whether to use WPA2 only or WPA only. WPA2 only is the most secure, provided that all of your clients can support this security method.Select whether to use the TKIP or AES cipher. The AES cipher is the most secure, provided that all of your clients can support it.Enter the IP address of your RADIUS server.Enter the port used for your RADIUS server.Enter the shared secret/password for your RADIUS server.WPA Mode:Cipher Type:RADIUS Server IP Address:RADIUS Server Port:RADIUS Server Shared Secret:WPA-Enterprise
30D-Link DWR-755 User ManualSection 3 - CongurationThis section will help you to change the internal network settings of your router and to congure the DHCP Server settings. After modifying any settings, click Save Settings to save your changes.Network SettingsROUTER SETTINGSEnter the IP address of the router. The default IP address is 192.168.0.1.If you change the IP address, once you click Save Settings, you will need to enter the new IP address in your browser to get back into the conguration utility.Enter the subnet mask. The default subnet mask is 255.255.255.0.Enter the local domain name for your network.Router IP Address:Subnet Mask:Local Domain Name:
31D-Link DWR-755 User ManualSection 3 - CongurationSelect this box to enable the DHCP server on your router. Enter the range of IPs for the DHCP server to use to assign IP addresses to devices on your network. These values will represent the last octet of the IP addresses in the pool.Enter the lease time for IP address assignments.Enter the primary DNS IP address that will be assigned to DHCP clients.Enter the secondary DNS IP address that will be assigned to DHCP clients.Enter the primary WINS IP address that will be assigned to DHCP clients. Enter the secondary WINS IP address that will be assigned to DHCP clients.Enable DHCP Server:DHCP IP Address Range:DHCP Lease Time:Primary DNS IP Address:Secondary DNS IP Address:Primary WINS IP Address:Secondary WINS IP Address:DHCP Server SettingsThe DWR-755 has a built-in DHCP (Dynamic Host Control Protocol) server. The DHCP server assigns IP addresses to devices on the network that request them. By default, the DHCP Server is enabled on the device. The DHCP address pool contains a range of IP addresses, which are automatically assigned to the clients on the network. After modifying any settings, click Save Settings to save your changes.
32D-Link DWR-755 User ManualSection 3 - CongurationIPv6There are several connection types to choose from: Static IPv6, LAN IPv6 Address, PPPoE, LAN IPv6 Link-Local, 6 to 4, 6rd, and Autoconguration. If you are unsure of your connection method, please contact your IPv6 Internet Service Provider (ISP).Note: If using the PPPoE option, you will need to ensure that any PPPoE client software on your computers has been removed or disabled.
33D-Link DWR-755 User ManualSection 3 - CongurationStatic IPv6Tick to Enable IPv6 tunneling.Select Static IPv6 from the drop-down menu.Enter the remote IPv4 address.Enter the local IPv4 address.Enter the default gateway.Enter the primary and secondary DNS addresses here.Enter the LAN IPv6 address.Displays the LAN IPv6 link-local address.Check to enable the autoconguration feature.Select SLAAC + Stateless DHCPv6 or Stateful (DHCPv6).Enter the IPv6 Address Lifetime (in seconds).Tick to enable DS-Lite.Tick Manual Conguration.Enter the AFTR IPv6 address supplied by your service provider.IPv6:IPv6 Connection:Remote IPv4 Address:Local IPv4 Address:Default Gateway:DNS Addresses:LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Autoconguration:Autoconguration Type:Router Advertisement Lifetime:DS-Lite Enable:DS-Lite Conguration:AFTR IPv6 Address:
34D-Link DWR-755 User ManualSection 3 - CongurationLAN IPv6 Address SettingsTick to Enable IPv6 tunneling.Select LAN IPv6 Address Settings from the drop-down menu.Enter the primary and secondary DNS addresses here.Tick to enable DHCP-PD.Enter the LAN IPv6 address.Displays the LAN IPv6 link-local address.Check to enable the autoconguration feature.Select SLAAC + Stateless DHCPv6 or Stateful (DHCPv6).Enter the IPv6 address lifetime (in seconds).Tick to enable DS-Lite.Tick DS-Lite DHCPv6 Option or Manual Conguration.Enter the AFTR IPv6 address supplied by your service provider.IPv6:IPv6 Connection:DNS Addresses:Enable DHCP-PD:LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Autoconguration:Autoconguration Type:Router Advertisement Lifetime:DS-Lite Enable:DS-Lite Conguration:AFTR IPv6 Address:
35D-Link DWR-755 User ManualSection 3 - CongurationPPPoETick to Enable IPv6 tunneling.Select LAN IPv6 Address Settings from the drop-down menu.Enter the LAN IPv6 address.You may need to change the Maximum Transmission Unit(MTU) for optimal performance.Enter the primary and secondary DNS addresses here.Tick to enable DHCP-PD.Enter the LAN IPv6 address.Displays the LAN IPv6 Link-local address.Check to enable the autoconguration feature.Select SLAAC + Stateless DHCPv6 or Stateful (DHCPv6).Enter the IPv6 address lifetime (in seconds).IPv6:IPv6 Connection:LAN IPv6 Address:MTU:DNS Addresses:Enable DHCP-PD:LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Autoconguration:Autoconguration Type:Router Advertisement Lifetime:
36D-Link DWR-755 User ManualSection 3 - CongurationLAN IPv6 Link-Local AddressTick to Enable IPv6 tunneling.Select LAN IPv6 Link-Local Address from the drop-down menu.Enter the remote IPv4 address.Enter the local IPv4 address.Enter the local IPv6 address.Choose to automatically obtain the DNS server address or to set manually.Enter the primary and secondary DNS addresses here.Enter the LAN IPv6 address.Displays the LAN IPv6 link-local address.Check to enable the autoconguration feature.Select SLAAC + Stateless DHCPv6 or Stateful (DHCPv6).Enter the IPv6 address lifetime (in seconds).IPv6:IPv6 Connection:Remote IPv4 Address:Local IPv4 Address:Local IPv6 Address:DNS Setting:DNS Addresses:LAN IPv6 Address:LAN IPv6 Link-Local Address:Enable Autoconguration:Autoconguration Type:Router Advertisement Lifetime:
37D-Link DWR-755 User ManualSection 3 - Conguration6 to 4Tick Enable to activate IPv6 tunneling.Select 6 to 4 from the drop-down menu.Displays the IPv6 settings supplied by your Internet Service Provider (ISP). Enter the primary and secondary DNS server addresses. Displays the LAN (local) IPv6 address for the router. Displays the router’s LAN link-local address.Check to enable the autoconguration feature.Select Stateful (DHCPv6) or SLAAC+Stateless DHCPv6 autoconguration.Enter the IPv6 address lifetime (in seconds).IPv6:IPv6 Connection:6 to 4 Address:Primary/Secondary DNS Address:LAN IPv6 Address:LAN Link-Local Address:Enable Autoconguration:Autoconguration Type:Router Advertisement Lifetime:
38D-Link DWR-755 User ManualSection 3 - Conguration6rdTick to Enable IPv6 tunneling.Select 6rd from the drop-down menu.Enter the IPv4 (remote) address here.Enter the mask length of the IPv4 address.Enter the remote prex of the IPv4 address.Enter the length of the remote prex.Enter the DNS server addresses.Displays the LAN (local) IPv6 address for the router. Displays the router’s LAN link-local address.Check to enable the autoconguration feature.Select Stateful (DHCPv6) or SLAAC+Stateless DHCPv6 autoconguration.Enter the IPv6 address lifetime (in seconds).IPv6:IPv6 Connection:Remote IPv4 Address:IPv4 Mask Length:Remote Prex:Prex Length:Primary/Secondary DNS Addresses:LAN IPv6 Address:LAN Link-Local Address:Enable Autoconguration:Autoconguration Type:Router Advertisement Lifetime:
39D-Link DWR-755 User ManualSection 3 - CongurationAutocongurationTick to Enable IPv6 tunneling.Select Autoconguration Type from the drop-down menu.Displays the router’s LAN link-local address.IPv6:IPv6 Connection:LAN Link-Local Address:
40D-Link DWR-755 User ManualSection 3 - CongurationMessage ServiceIf your ISP provides SMS service, you can check and send messages from this page.Click this button to view SMS messages that you have received.Click this button to create a new message to send.SMS Inbox:Create Message:Deletes the selected SMS message.Opens a Create Message window to reply to the selected SMS message.Opens a Create Message windows to forward the selected SMS message to another recipient.Click this button to check for new messages.Delete:Reply:Forward:Refresh:SMS InboxThis page shows all messages that are stored on the SIM card. Select a message to display its contents in the SMS window. After you have read a message, you can delete it, or reply to the sender. Click the Refresh button to update the list.
41D-Link DWR-755 User ManualSection 3 - CongurationCreate MessageType the phone number of the recipient.Type the message that you would like to send.Click this button to send the message.Click this button to clear the message.Receiver:Text Message:Send Message:Cancel:This page allows you to send an SMS to your contacts. Just ll in the phone number of the recipient, and type the content of the message. Then click the Send Message button to send out the message. If you would like to add more than one recipient, you must put a semicolon (;) between each of the phone numbers.
42D-Link DWR-755 User ManualSection 3 - CongurationUSSDYou can use this page to send Unstructured Supplementary Service Data (USSD) codes used by your service provider to activate specic applications with an SMS message.Enter an application activation code and click the Sendbutton. This will allow you to activate applications by sendingan SMS to your ISP.USSD:
43D-Link DWR-755 User ManualSection 3 - CongurationVPN SettingsVPN Setup WizardThe DWR-755 allows you to set up VPN using the automated VPN Setup Wizard or using Manual VPN Setup. VPN settings are used to create virtual private tunnels to remote VPN gateways. The tunnel technology supports data condentiality, data origin authentication, and data integrity of network information by utilizing encapsulation protocols, encryption algorithms, and hashing algorithms.This window explains the steps you will be guided through to set up an IPSec VPN tunnel.Click Next to continue. If there is a trusted subnet for remote gateway, select Ye s, otherwise choose No.Click Next to continue. If you chose “yes” you will now need to enter the Remote Subnet and Remote Netmask. Click Next to continue. Enter the Remote Gateway address.Click Next to continue.
44D-Link DWR-755 User ManualSection 3 - CongurationSet the type of encryption and authentication of your IPsec proposal settings and click Next.Set your Preshared Key.Click Next to continue. Set your IKE Proposal Settings by choosing your Encryption, Authentication, and DH Group settings from the drop-down menus.Click Next to continue. When setup is completed the name and security details will be displayed and the router will reboot.Click Save to nish.
45D-Link DWR-755 User ManualSection 3 - CongurationCheck this box to enable IPSec VPN function.Check this box to receive Netbios from Network Neighborhood.Some NAT routers will block IPSec packets if it doesn’t support IPSec passthrough. If you connect to another NAT router which doesn’t support IPSec passthrough on the WAN side, you need to activate this option.Check this box to enable VPN Statistic options.The device supports 1~10 tunnels.Check this box to enable this features and click More to congure VPN Dynamic IP on a separate page. Please see the next page for more details.Tunnel details are displayed here. Click More to congure a new tunnel or click Disconnect to disconnect from an existing tunnel.Select the Enable checkbox to activate this rule.In tunnel settings page, you can click More under Action for detail tunnel setting.XAUTH account: select it to store XAUTH account information such as user name and password.PPTP client / PPTP Server: DWR-755 can act as either client or server under PPTP, click it to congure this setting.L2TP client / L2TP Server: DWR-755 can act as either client or server under L2TP, click it to congure this setting.VPN-IPSEC:Netbios over IPSEC:NAT Traversal:VPN Statistic: Max Number of Tunnels:VPN Dynamic IP Setting:Tunnel Settings:Manual VPN SetupThis section will help you create and congure your VPN settings. The router supports IPSec as the Server Endpoint. IPSec (Internet Protocol Security) is a set of protocols dened by the IETF (Internet Engineering Task Force) to provide IP security at the network layer.
46D-Link DWR-755 User ManualSection 3 - CongurationVPN Dynamic IPEnter a name for your VPN.Enter the local (LAN) subnet and mask.(ex. 192.168.0.0/24)Enter the amount of time in seconds that the Phase 1 and Phase 2 keys should last.Choose either ESP, AH or ESP + AH from the drop-down menu.Enable or Disable the PFS Group option using the drop-down menu. PFS is an additional security protocol.Manually enter an ASCII passphrase in box.Choose from Username, FQDN, User@FQDN, or Key ID using the drop-down menu and then the ID in the box.Choose from Username, FQDN, User@FQDN, or Key ID using the drop-down menu and then the ID in the box.Check this box to enable Dead Peer Detection, then enter the time in seconds in which a peer is determined to be no longer active. You may also enter a delay period in seconds.Check this box to include additional username and password authentication requirements for the VPN. Select Server Mode or None. Then enter the user name and password if required by the remote VPN server endpoint congured in xAuth Server Mode.Check this box to enable IKE Proposal.Check this box to enable IPSec Proposal.Tunnel Name:Local Subnet/Netmask:Phase1/2 Key Life Time:Encapsulation Protocol:PFS Group:Preshare Key:Remote ID:Local ID:Dead Peer Detection (DPD):XAUTH:Set IKE Proposal:Set IPSEC Proposal:
47D-Link DWR-755 User ManualSection 3 - CongurationUse this area to Enable IKE Proposals. Then determine the Encryption and Authentication types, as well as the DH Group from the drop-down menus.Use this area to Enable IPSec Proposals. Then determine the Encryption and Authentication types from the drop-down menus.IKE Proposal Settings:IPSEC Proposal Settings:
48D-Link DWR-755 User ManualSection 3 - CongurationIndicate a tunnel name for this VPN conguration.Choose either IKE from the drop-down menu.The subnet of the VPN gateway’s local network. It can be a host, a partial subnet or a whole subnet.Local netmask combined with local subnet to form a subnet domain.The subnet of the remote VPN gateway’s local network. It can be a host, a partial subnet, or a whole subnet.The netmask of the remote VPN gateway’s local network.The WAN IP address of remote VPN gateway.The phase 1 key life time of the dedicated VPN tunnel between both end gateways (in seconds). Its value can range from 300 seconds to 172,800 seconds.The phase 2 key life time of the dedicated VPN tunnel between both end gateways (in seconds). Its value can range from 300 seconds to 172,800 seconds.ESP, AH, or ESP+AH.Three groups can be selected: None, Group 1, Group 2, Group 5.None: No PFS group Group 1: 768-bit Die-Hellman prime modulusGroup 2: 1024-bit Die-Hellman prime modulusGroup 5: 1536-bit Die-Hellman prime modulusTunnel Name:Method:Local Subnet: Local Netmask: Remote Subnet:Remote Netmask: Remote Gateway:Phase 1 Key Life Time:Phase 2 Key Life Time: Encapsulation Protocol:PFS Group:Tunnel - IKETick Enabled, choose IKE in the Method eld, and congure your settings. When you are done, click Save Settings to apply changes.
49D-Link DWR-755 User ManualSection 3 - CongurationEnabling this mode will accelerate the initial tunnel setup, but the device will suer from less security in the meantime. Hosts at both ends of the tunnel must support this mode so as to establish the tunnel properly.The rst key that supports IKE mechanism of both VPN gateway and VPN client host for negotiating further security keys. The pre-shared key must be same on both VPN gateways and clients.Choose Always on or Manual from the drop-down menu.The Type and the Value must be the same as the Type and the Value of the Local ID of the remote VPN gateway.The Type and the Value must be the same as the Type and the Value of the Remote ID of the remote VPN gateway.Input the IP address of remote host that exist in the remote side of the VPN tunnel (Ex. You can input the LAN IP address of remote VPN gateway). The device will start to Ping the remote host when there is no trac within the VPN tunnel. If the device is no longer receiving an ICMP response from remote host, it will terminate the VPN tunnel automatically.Check this box to enable Dead Peer Detection, then enter the time in seconds in which a peer is determined to be no longer active. You may also enter a delay period in seconds.Check this box to include additional username and password authentication requirements for the VPN. Select Server Mode or None. Then enter the user name and password if required by the remote VPN server endpoint congured in xAuth Server Mode.Check this box to enable IKE Proposal.Check this box to enable IPSec Proposal.Aggressive Mode: Preshared Key: Connecting Type: Remote ID:Local ID:Dead Peer Detection (DPD):XAUTH:Set IKE Proposal:Set IPSEC Proposal:
50D-Link DWR-755 User ManualSection 3 - CongurationFive algorithms can be selected: DES, 3DES, AES-128, AES-192, and AES-256.Two algorithms can be selected: SHA1 and MD5.Three groups can be selected: group 1 (MODP768), group 2 (MODP1024), and group 5 (MODP1536).Select this checkbox to enable the IKE Proposal with this rule.Five algorithms can be selected: DES, 3DES, AES-128, AES-192, and AES-256. However, when the encapsulation protocol is set to AH, the encryption algorithm is unnecessary.Two algorithms can be selected: SHA1 and MD5.Select this checkbox to enable the IKE Proposal with this rule.Encryption: Authentication:DH Group:Enable:Encryption:Authentication:Enable:
51D-Link DWR-755 User ManualSection 3 - CongurationIndicate a tunnel name for this VPN conguration.Choose Manual from the drop-down menu.The subnet of the VPN gateway’s local network. It can be a host, a partial subnet or a whole subnet.Local netmask combined with local subnet to form a subnet domain.The subnet of the remote VPN gateway’s local network. It can be a host, a partial subnet, or a whole subnet.The netmask of the remote VPN gateway’s local network.The WAN IP address of remote VPN gateway.Select ESP or AH.SPI is an important parameter during hashing. Outbound SPI will be included in the outbound packet transmitted from local gateway. The value of outbound SPI should be set in hex formatted.Inbound SPI will be included in the inbound packet transmitted from WAN site of remote gateway. It will be used to de-hash the coming packet and check its integrity. The value of outbound SPI should be set in hex formatted.Tick Enabled, choose MANUAL in the Method eld, and congure your settings. When you are done, click Save Settings to apply changes.Tunnel - ManualTunnel Name:Method:Local Subnet:Local Netmask:Remote Subnet:Remote Netmask:Remote Gateway:Encapsulation Protocol:Outbound SPI:Inbound SPI:
52D-Link DWR-755 User ManualSection 3 - CongurationTwo algorithms can be selected: 3DES and DES. When the encapsulation protocol is set to AH, the encryption algorithm is unnecessary.The encryption key is used by the encryption algorithm. Its length is 8 bytes if encryption algorithm is DES or 24 bytes if 3DES. The key value should be set in hex format.Two algorithms can be selected: SHA1 and MD5.This authentication key is used by the authentication algorithm. Its length is 16 bytes if authentication algorithm is MD5 or 20 bytes if SHA1. Its length will be 0 if no authentication algorithm is chosen. The key value should be set in hex format.Encryption Algorithm: Encryption Key:Authentication Algorithm: Authentication Key:
53D-Link DWR-755 User ManualSection 3 - CongurationVirtual ServerThe device can be congured as a virtual server so that users can access services such as Web or FTP via the public (WAN) IP address of the router. Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.This contains a list of pre-dened services.Copies the rule to the line of the specied ID.You may select Always On or choose the number of a schedule rule that you have dened.VIRTUAL SERVERS LISTThis identies the rule.Enter the public port(s) you want to open.Enter the IP address and port of the computer on your local network that you want to forward the Service Ports to.Check the box to enable the specied rule.Specify the schedule rule number. To create schedules, click on the Add New Rule button. For further information on schedules, please refer to “Schedules” on page 75.Well-known Services: Copy to: Use schedule rule:ID:Service Ports:Server IP: Port:Enable:Schedule Rule #:Advanced
54D-Link DWR-755 User ManualSection 3 - CongurationApplication RulesSome applications require multiple connections, such as Internet gaming, video conferencing, and Internet telephony. These applications may have diculty working through NAT (Network Address Translation). Application Rules allow some of these applications to work with the DWR-755 by opening ports after detecting trac being sent through a trigger port. After modifying any settings, click Save Settings to save your changes.Select from a list of popular applications. You can select a service, select a rule ID, then click the Copy to button to copy the default settings for that service to the specied rule ID.Species which rule to copy the selected Popular application settings to when you click the Copy to button.APPLICATION RULESThis identies the rule.Enter the port to listen to in order to trigger the rule.Specify the incoming port(s) to open when trac comes over the Trigger port.Check the box to enable the specied rule.Popular Applications:ID:ID:Trigger:Incoming Ports: Enable:
55D-Link DWR-755 User ManualSection 3 - CongurationQoS EngineQOS ENGINE SETUPSelect this box to enable the QoS feature.Specify the maximum upstream bandwidth here (e.g. 400 Kbps).Select a schedule to use and copy to the specied rule ID when you click the Copy to button. You may select Always On or use a specic schedule that you have dened. To create and edit schedules, please refer to “Schedules” on page 75.QOS RULESThis identies the rule.Specify the local IP address(es) and port(s) for the rule to aect.Specify the remote IP address(es) and port(s) for the rule to aect.Select what priority level to use for trac aected by the rule: Low, Normal, or High.Check the box to enable the specied rule. Specify the schedule rule number. To create a new schedule, click on the Add New Rule button. For more information about schedules, please refer to “Schedules” on page 75.Enable QOS Packet Filter: Upstream Bandwidth:Use Schedule Rule: ID:Local IP : Ports:Remote IP : Ports:QoS Priority:Enable:Use Rule #:The QoS engine improves your online gaming or streaming media experience by ensuring that your game or media trac is prioritized over other network trac, such as FTP or web. For best performance, use the Automatic Classication option to automatically set the priority for your applications. After modifying any settings, click Save Settings to save your changes.
56D-Link DWR-755 User ManualSection 3 - CongurationMAC Address FilterMAC FILTERING SETTINGSTick this box to enable MAC ltering.Check the box to allow wireless and wired clients with C selected to connect to this device. You can also select to allow or deny connections from unspecied MAC addresses.Check the box to allow wireless clients with A selected can associate to the wireless LAN. You can also select to allow or deny connections from unspecied MAC addresses.MAC FILTERING RULESThis identies the rule.Specify the MAC address of the computer to be ltered.Specify the last section of the IP address.If this box is ticked, the rule will follow the connection control setting specied in MAC ltering settings specied above.If this box is ticked, the rule will follow the association control setting specied in MAC ltering settings specied above.MAC Address Control:Connection Control: Association Control: ID:MAC Address: IP Address:C:A:The MAC (Media Access Controller) address lter option is used to control network access based on the MAC address of the network adapter. A MAC address is a unique ID assigned by the manufacturer of the network adapter. This feature can be congured to ALLOW or DENY network/Internet access. After modifying any settings, click Save Settings to save your changes.
57D-Link DWR-755 User ManualSection 3 - CongurationCheck the box to enable URL ltering.URL FILTERING RULESThis identies the rule.Enter URL that you would like to block. All URLs that begin with this URL will be blocked.Check the box to enable the specied rule.The URL lter allows you to set up a list of websites that will be blocked from users on your network. After modifying any settings, click Save Settings to save your changes.URL FilterURL Filtering: ID:URL: Enable:
58D-Link DWR-755 User ManualSection 3 - CongurationOUTBOUND FILTER SETTINGSelect this box to Enable outbound ltering.Select a schedule to use and copy to the specied rule ID when you click the Copy to button. You may select Always On or use a specic schedule that you have dened. To create and edit schedules, please refer to “Schedules” on page 75.OUTBOUND FILTER RULES LISTHere, you can select whether to Allow or Deny all outgoing trac except for trac that matches the listed rules.This identies the rule.Specify the local IP address and then specify the port after the colon.Specify the remote IP address and then the port after the colon.Check the box to enable the specied rule.Specify the schedule rule number. Click on the Add New Rule button to create a new schedule rule. Go back to the previous lter page.Advance to the next lter page.Outbound FilterOutbound Filter:Use Schedule Rule: ID:Source IP : Ports: Destination IP : Ports: Enable:Schedule Rule #:Previous Page:Next Page:The outbound lter enables you to control what packets are allowed to be sent out to the Internet. The outbound lter applies to all outbound packets. After modifying any settings, click Save Settings to save your changes.
59D-Link DWR-755 User ManualSection 3 - CongurationINBOUND FILTER SETTINGSelect this box to Enable the lter.Select a schedule to use and copy to the specied rule ID when you click the Copy to button. You may select Always On or use a specic schedule that you have dened. To create and edit schedules, please refer to “Schedules” on page 75.INBOUND FILTER RULES LISTHere, you can select whether to Allow or Deny all incoming trac except for trac that matches the listed rules.This identies the rule.Specify the local IP address and then specify the port after the colon.Specify the remote IP address and then the port after the colon.Check the box to enable the specied rule.Specify the schedule rule number. Click on the Add New Rule button to create a new schedule rule. Go back to the previous lter page.Advance to the next lter page.Inbound FilterInbound Filter:Use Schedule Rule:ID:Source IP : Ports:Destination IP : Ports:Enable:Schedule Rule #:Previous Page:Next Page:The inbound lter enables you to control what packets are allowed to come in to your network from the Internet. The inbound lter only applies to packets that are destined for Virtual Servers or DMZ hosts. After modifying any settings, click Save Settings to save your changes.
60D-Link DWR-755 User ManualSection 3 - CongurationSNMPSelect whether to Enable or Disable local SNMP administration.Select whether to Enable or Disable remote SNMP administration.Enter the password public in this eld to allow read-only access to network administration using SNMP. You can view the network, but no conguration is possible with this setting.Enter the password private in this eld to enable read/write access to the network using SNMP.Enter up to 4 IP addresses to use as trap targets for your network.Select the SNMP version of your system.If you want to limit remote access SNMP access, enter the IP address of the remote computer you will use to access this device; all other IP addresses will be denied remote SNMP access.SNMPSNMP Local: SNMP Remote: Get Community: Set Community: IP 1/2/3/4:SNMP Version:WAN Access IP Address:SNMP (Simple Network Management Protocol) is a widely used network monitoring and control protocol that reports activity on each network device to the administrator of the network. SNMP can be used to monitor trac and statistics of the DWR-755. The DWR-755 supports SNMP v1 and v2c. After modifying any settings, click Save Settings to save your changes.

Navigation menu