D and M H1GPDONGLE Bluetooth Dongle User Manual HEOS 1 GP EM QSG WT 150317 indd

D&M; Holdings Inc. Bluetooth Dongle HEOS 1 GP EM QSG WT 150317 indd

UserManual.wiki >

H1GPDONGLE User Manual

User Manual

HEOS 1 Go Pack QUICK START GUIDEHEOS 1 GP EM QSG WT 150317.indd 1 2015/03/17 17:58:15

1Make sure you have the following items in working order:Apple iOS or Android mobile device connected to your networkHEOS 1 SpeakerBEFORE YOU BEGINBefore using a new HEOS 1 speaker with Bluetooth, we recommend you ﬁ rst connect your HEOS 1 Speaker to your home network to get the latest speaker updates and newest features.A home network is not required for every day Bluetooth functionality.HEOS 1 GP EM QSG WT 150317.indd 1 2015/03/17 17:58:16

HEOS 1 Go Pack QUICK START GUIDE2Français Español Deutsch Nederlands Italiano Svenska Dansk Norsk Pусский PolskiEnglishCarefully unpack your HEOS 1 Go Pack.Verify that the following items are included in the box.STEP 1: UNPACKHEOS 1 GP EM QSG WT 150317.indd 2 2015/03/17 17:58:17

3STEP 2: PREPARERemove the cap from the bottom of the HEOS 1 speaker by turning the cap counter-clockwise and pulling it away from the speaker.HEOS 1 GP EM QSG WT 150317.indd 3 2015/03/17 17:58:17

HEOS 1 Go Pack QUICK START GUIDE4Français Español Deutsch Nederlands Italiano Svenska Dansk Norsk Pусский PolskiEnglishAlign the red dots on the top of the battery and bottom of the speaker.1STEP 3: ATTACHTurn the battery clockwise so that it is aligned with the shape of the speaker.2HEOS 1 GP EM QSG WT 150317.indd 4 2015/03/17 17:58:18

5To charge the battery, connect the HEOS 1 power adapter between the speaker and a wall outlet. Four blue LEDs indicate a full charge.STEP 4: CHARGEHEOS 1 GP EM QSG WT 150317.indd 5 2015/03/17 17:58:19

HEOS 1 Go Pack QUICK START GUIDE6Français Español Deutsch Nederlands Italiano Svenska Dansk Norsk Pусский PolskiEnglishOnce your battery is fully charged, attach the Bluetooth Adapter to the back of the speaker.STEP 5: GO WIRELESSHEOS 1 GP EM QSG WT 150317.indd 6 2015/03/17 17:58:20

7STEP 6: PAIRINGPairing the HEOS 1 with your DevicesBluetoothPress and hold the Connect button located on the back of the HEOS 1 speaker (under the right side of the cap) for 3 seconds and release the button when you see a pattern of two ﬂ ashes on the status LED.Activate the Bluetooth setting on your mobile device.21HEOS 1 GP EM QSG WT 150317.indd 7 2015/03/17 17:58:20

HEOS 1 Go Pack QUICK START GUIDE8Français Español Deutsch Nederlands Italiano Svenska Dansk Norsk Pусский PolskiEnglishHEOS 1Select “HEOS 1“ from the list of available Bluetooth devices. In a few seconds your mobile device will indicate that it is connected to your speaker. Play music using any app on your device. The sound will now play from the HEOS 1 speaker.43HEOS 1 GP EM QSG WT 150317.indd 8 2015/03/17 17:58:21

9STEP 7: CLOSE SPLASHGUARDPress in the Splashguard so that it is ﬁ rmly and evenly attached.Remove the power connector from the speaker.21Properly attaching the splashguard will make your HEOS 1 speaker waterproof to the IPX4 standard. DO NOT submerge the speaker in water!HEOS 1 GP EM QSG WT 150317.indd 9 2015/03/17 17:58:22

HEOS 1 Go Pack QUICK START GUIDE10Français Español Deutsch Nederlands Italiano Svenska Dansk Norsk Pусский PolskiEnglishTURNING OFF THE BATTERYTo turn oﬀ the battery, press and hold the button on the back of the battery for 2 seconds. The LEDs will ﬂ ash quickly then turn oﬀ , indicating that the battery is oﬀ . Turning oﬀ the battery will conserve battery power while you are not playing music and HEOS 1 is not plugged in to AC power.To turn the battery back on, press and hold the button again for 2 seconds.Note: while the battery is disconnected from HEOS 1, it is always oﬀ .HEOS 1 GP EM QSG WT 150317.indd 10 2015/03/17 17:58:22

11• For more information, visit www.HEOSbyDenon.com• Refer to the Online Manual for other functions information and operation procedure details.manuals.denon.com/HEOS1/ALL/ENOWNER'S MANUALHEOS 1 GP EM QSG WT 150317.indd 11 2015/03/17 17:58:23

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following tow conditions: (1)this device may not cause interference, and(2) this device must accept any interference, includinginterference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.

FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Modifications to this product will void the user’s authority to operate this equipment.