D and S Creation NOTTI6820 Notti User Manual Instruction Manual 11 12 2014
D&S; Creation Limited Notti Instruction Manual 11 12 2014
User Manual
Instruction Manual NOTTI for NOTTI Instruction Manual Power Button Micro USB Port Reset Button Visit our tutorial page for more video and info http://www.wittidesign.com/tutorial/notti Turning On/Off NOTTI 1) Press and hold the Power button for 2s to power on/off NOTTI. 2) Quickly press the power button once to switch the light off. Please note that notifications can still be received when light is off. Connecting and Using NOTTI 1) Download the NOTTI free App from App Store or Google Play. Keyword Search: Notti. 2) To connect to NOTTI, open the App, press the "Search" icon, click on "NOTTI". When prompt for pairing password, please enter "123456" 3) You can use NOTTI App to do the following: • Adjust Light color and brightness, color changing. • Customize Notifications • Play Music • Set Wake Up light • Set NOTTI default light color when turned on. • Rename NOTTI 4) If NOTTI is on, and Bluetooth is turned on, your smartphone will be connected to NOTTI automatically once in range. Receiving Notifications If you received a notification, corresponding light color will blink. If you received more than 1 notification, all corresponding light color will cycle through. If you read the notification on your phone, the corresponding light color on NOTTI will be off. You can also press the Power button on NOTTI to clear all notifications on NOTTI (phone notifications will still exist) Charging NOTTI Use a Micro USB cable to charge NOTTI via Micro USB port. Input 5V. The Battery Indicator light will flash while charging, and will stay on when NOTTI is fully charged NOTTI should take around 2 to 3 hours until fully charged The Battery Indicator light will flash for 30s if NOTTI is low in battery The WITTI logo and NOTTI are trademarks of D&S Creation Limited. All other trademarks are properties of their respective owners. And any use of such marks by WITTI is under license. Assembled in China www.wittidesign.com ©2014 D&S Creation Ltd. All Rights Reserved Page: 1/3 Resetting NOTTI If NOTTI becomes non-responsive, you can reset NOTTI by using a small pin to push the reset button located at the bottom of NOTTI Renaming NOTTI If you have more than one NOTTI, you can rename NOTTI at the settings tab to differentiate between the various NOTTI. Please note that the word “- NOTTI” will be appended to the name you specified Reusable Packaging The inner part can be folded onto a phone stand. Please watch the how-to-use video to see how to make it. Troubleshoot - Light does not turn on Please plug in USB cable to make sure NOTTI is charged. Press the Power button for 3 seconds to make sure the unit is turned on. - NOTTI App cannot control NOTTI Please make sure Bluetooth is on. Sometimes the App might be disconnected to NOTTI. Click the search Icon again and reselect the corresponding NOTTI. If problem persists, restart both NOTTI and the App. For iOS, you can try to unpair NOTTI in the iOS settings (Bluetooth), and try to reconnect again - Notifications cannot be received Please make sure Bluetooth is on. If only one specific Notification cannot be received, please switch off and switch on that Notification again. If all Notifications cannot be received, please try to switch unpair and restart NOTTI, and reconnect again. - NOTTI name does not change after set Sometimes the Bluetooth module needs to be restarted before the name change takes effect. Please restart NOTTI and the name should be updated For further Assistance, please contact us at service@wittidesign.com NOTTI User Manual http://www.wittidesign.com/manuals/notti/ Notti App Keyword: Notti http://www.wittidesign.com/download/notti/ The WITTI logo and NOTTI are trademarks of D&S Creation Limited. All other trademarks are properties of their respective owners. And any use of such marks by WITTI is under license. Assembled in China www.wittidesign.com ©2014 D&S Creation Ltd. All Rights Reserved Page: 2/3 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help Due to the used enclosure material, the GSM mobile phone shall only be connected to a USB Interface of version 2.0 or higher. The connection to so called power USB is prohibited. Do not use the mobile phone in the environment at too high or too low temperature, never expose the mobile phone under strong sunshine or too wet environment. The suitable temperature for the phone and accessories is 0℃-40℃. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Regulatory Conformance Hereby, Corporation declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the Web site www.wittidesign.com/certification. Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU) Limited Warranty 1 year. http://www.wittidesign.com/warranty The WITTI logo and NOTTI are trademarks of D&S Creation Limited. All other trademarks are properties of their respective owners. And any use of such marks by WITTI is under license. Assembled in China www.wittidesign.com ©2014 D&S Creation Ltd. All Rights Reserved Page: 3/3
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 4.2.2-c063 53.351735, 2008/07/22-18:11:12 Format : application/pdf Title : Instruction Manual_11_12_2014 Metadata Date : 2014:12:12 11:14:50+08:00 Modify Date : 2014:12:12 11:14:50+08:00 Create Date : 2014:12:12 11:14:50+08:00 Creator Tool : Adobe Illustrator CS4 Thumbnail Width : 256 Thumbnail Height : 156 Thumbnail Format : JPEG Thumbnail Image : (Binary data 14387 bytes, use -b option to extract) Instance ID : uuid:7df93215-351e-43ec-8fa8-9f43b8eec9a7 Document ID : xmp.did:F4676F05AD81E411A526BBD416586620 Original Document ID : uuid:5B20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:4b1e8246-da2d-46d0-84c8-de7a908ad4a0 Derived From Document ID : xmp.did:582822EB0381E411A61BD756144D455D Derived From Original Document ID: uuid:5B20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : converted, saved, converted, converted, saved, converted, saved, converted, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:CF7F11740720681191099C3B601C4548, xmp.iid:0080117407206811BDDDFD38D0CF24DD, xmp.iid:F87F117407206811B628E3BF27C8C41B, xmp.iid:0BC3BD25102DDD1181B594070CEB88D9, xmp.iid:F87F117407206811BB1DBF8F242B6F84, xmp.iid:F97F117407206811BB1DBF8F242B6F84, xmp.iid:F77F117407206811ACAFB8DA80854E76, xmp.iid:FEE440664A3DDD11BD33D3EB8D3A1068, xmp.iid:2F85BBCD703EDD11A8D1DFE8FDCD79D1, xmp.iid:676AE2A5723EDD11A6F1BABF7C5A7A51, xmp.iid:582822EB0381E411A61BD756144D455D, xmp.iid:F4676F05AD81E411A526BBD416586620 History When : 2008:04:17 14:19:07+05:30, 2008:05:16 12:18:29-07:00, 2008:05:22 12:59:33-07:00, 2008:05:28 17:02:32-07:00, 2008:06:09 15:05:10-07:00, 2008:06:09 15:05:47-07:00, 2008:06:11 14:30:01-07:00, 2008:06:18 22:22:44+07:00, 2008:06:19 19:30:09-07:00, 2008:06:19 19:43:22-07:00, 2014:12:11 15:57:32+08:00, 2014:12:12 11:14:44+08:00 History Software Agent : Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4, Adobe Illustrator CS4 History Changed : /, /, /, /, /, /, /, /, /, /, /, / History Params : from application/vnd.adobe.illustrator to application/vnd.adobe.illustrator Startup Profile : Basic CMYK Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 215.900000 Max Page Size H : 279.400000 Max Page Size Unit : Millimeters Font Name : AdobeMingStd-Light, NotoSansJP-Thin, NotoSansJP-Regular, NotoSansJP-Medium, NotoSansJP-Light, NotoSansJP-Black Font Family : Adobe 明體 Std, Noto Sans Japanese Thin, Noto Sans Japanese Regular, Noto Sans Japanese Medium, Noto Sans Japanese Light, Noto Sans Japanese Black Font Face : L, Thin, Regular, Medium, Light, Black Font Type : Open Type, Open Type, Open Type, Open Type, Open Type, Open Type Font Version : Version 5.003;PS 5;hotconv 1.0.49;makeotf.lib2.0.14802, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930, Version 1.000;PS 1;hotconv 1.0.78;makeotf.lib2.5.61930 Font Composite : False, False, False, False, False, False Font File Name : AdobeMingStd-Light.otf, NotoSansJP-Thin.otf, NotoSansJP-Regular.otf, NotoSansJP-Medium.otf, NotoSansJP-Light.otf, NotoSansJP-Black.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : Crosses Color Group Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=25 M=85 Y=60 K=10 Swatch Groups Colorants Mode : CMYK Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Cyan : 25.000000 Swatch Groups Colorants Magenta : 84.999996 Swatch Groups Colorants Yellow : 60.000002 Swatch Groups Colorants Black : 10.000002 Producer : Adobe PDF library 9.00 Page Count : 4 Creator : Adobe Illustrator(R) 14.0 For : victor, Bounding Box : -9 -928 2884 816 Container Version : 11 Creator Version : 14EXIF Metadata provided by EXIF.tools