D and T FS-4201C 42" LCD Monitor User Manual ATT E MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	764922
Application ID	Q7Z6RMf29c5e+mOLVE4w7Q==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	134.92kB (1686494 bits)
Date Submitted	2007-03-06 00:00:00
Date Available	2007-03-06 00:00:00
Creation Date	2007-01-13 05:55:08
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2007-01-13 05:56:50
Document Title	Microsoft Word - ATT.E_MANUAL_.doc
Document Creator	PScript5.dll Version 5.2.2
Document Author:	Owner

FCC ID : FS-L4201C
ATTACHMENT E.
- USER’S MANUAL -
HYUNDAI CALIBRATION & CERTIFICATION TECHNOLOGIES CO., LTD.
SAN 136-1, AMI-RI, BUBAL-EUP, ICHEON-SI, KYOUNGKI-DO, 467-701, KOREA
TEL:+82 31 639 8517
FAX:+82 31 639 8525
www.hct.co.kr
Report No. :
HCT-F07-0101
User Manual
English
TFT-LCD Color Monitor
FS-L4201C
www.tandberg.net
Printed in Korea
Part No. 942667020001 - 01
INFORMATION TO USER :
This equipment has been tested and found to comply with the limits of a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.This equipment generates, uses and
can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation; if this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to crrent the interference by one or more
of the fllowing measures:
Table of Contents
Parts
Connection to Signal Source
Out Drawing of product
Name and Function
Power Management Feature
Adjusting OSD
10
Standard Signal Table
12
Pin assignment table of signal connector
13
Specification
15
1. Reorient/Relocate the receiving antenna.
Troubleshooting
16
2. Increase the separation between the equipment and receiver.
Warning
18
3. Connect the equipment into an outlet on a circuit difference
from that to which the recerver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Changes or modifications not expressly approved by the
manufacturer responsible for compliance could void the user's
authority to operate the equipment
Parts
Connection to Signal Source
Basic Connection
42 " LCD Monitor
User's Manual
This monitor do not provide any other accessaries and
peripheral devices (ex,speaker and signal cable) because
the Tandberg's reguest.
LCD
MONITOR
User s Manual
AC Inlet.
AC on/ off Switch
RCA Coaxial S/PDIF Audio input
9 Pin D-Sub connector for Speaker Out
24 Pin DVI Connector for Digital TMDS
15 Pin D-Sub connector for Analog RGB
LCD
MONITOR
User s Manual
O ut Drawing of product
< Power source connection >
< Signal cable connection>
D-Sub Analog(Data in)
DVI Digital
Coaxial S/PDIF Input
AC Inlet
Audio amp Output
AC on/off swith
1. Use 220 V or 110 V. (Free Voltage)
2. Connect monitor and Signal Source via Signal cable
3. Power on the monitor and computer.
4. Connection is finished.
LCD
MONITOR
User s Manual
LCD
MONITOR
User s Manual
Name and Function
Front side
Power Management Feature
Rear side
Power management system of this monitor can not be corresponded
with VESA DPMS when the display video signal is none because the
specific character of Tandberg system
Status
LED Sign
Power Consumption
Normal mode
Green on
Normal Power
Stand by mode
Red on
20W or Below
Power indicating LED
Remote signal window
SOURCE BUTTON
MENU BUTTON
- BUTTON
OK BUTTON
+ BUTTON
BUTTON
BUTTON
LCD
MONITOR
User s Manual
LCD
MONITOR
User s Manual
Adjusting OSD
Functions
Remote signal wirdow
This window is for the receiving signal from remote controller
Do not hide this window.
Power Indicating LED
Green : Normal mode
RED : Standby mode
On-Screen Display (OSD) Function Button
PICTURE
MENU : With OSD deactivated, Activated to OSD menu
With OSD activated, Exit from main menu or sub menu.
OK : With OSD deactivated, you can see the kind of displayed source on the right
bottom side of the screen.
With OSD activated, Enter sub menu and change each sub menu item
UP(
: With OSD deactivated, Hot key of the brightness control and increases
the brightness.
With OSD activated, move the cursor upward.
DOWN(
: With OSD deactivated, Hot key of the brightness control and
decreases the brightness.
With OSD activated, move the cursor downward.
PLUS( : With OSD deactivated, Hot key of the contrast control and increases
the contrast.
With OSD activated, enter sub menu and increases the adjustment of
the selected function.
MINUS(-) : With OSD deactivated, Hot key of the contrast control and decreases
the contrast.
With OSD activated, decreases the adjustment of the selected function.
SOURCE : For the extra function, normally no need to use this button.
9 - English
LCD
MONITOR
User s Manual
1. BRIGHTNESS
Increase or decrease the brightness (Range : 0~100)
2. CONTRAST
Increase or decrease the Contrast (Range : 0~100)
3. BACK LIGHT
Increase or decrease the CCFL back light luminance (Range : 0~100)
COLOR TEMP
1. MODE
Change the Color mode ( 6500, 7200, 9300, USER )
2. RED
Red balance (Only Working with USER mode) (Range : 0~100)
3. GREEN
Green balance (Only Working with USER mode) (Range : 0~100)
4. BLUE
Blue balance (Only Working with USER mode) (Range : 0~100)
LCD
MONITOR
10 User s Manual
English - 10
Standard Signal Table
IMAGE
PC Supported Mode
1. IMAGE SIZE
Change the image size (Scaling mode) (Full,Fill aspect, 1:1)
2. SHARPNESS
Set the sharpness of image (Softest,Softest,Normal,Sharp,Sharpest)
3. RESET SETTINGS
Changes all OSD values to factory outgoing status.
SETUP
1. LANGUAGE
Change the OSD language
orean,English,French,Spanish,German,Chinese,Japanese,Italian
2. OSD COLOR
Adjust the OSD back ground from white opaque to half translucent.
3. OSD POSITION
Change the OSD position (9 postions)
4. DURATION
Adjust OSD display time
(5, 10, 20, 30, 60, 90, 120, 180, 240 seconds)
LCD
MONITOR
11 User s Manual
Resolution
Horizontal Frequency
(KHz)
Vertical Frequency
(Hz)
Clock Frequency
(MHz)
(640 X 480)
31.5
60
25.175
(640 X 480)
37.9
72
31.5
(640 X 480)
37.5
75
31.5
(640 X 480)
43.3
85
36
(800 X 600)
31.5
50
35.4375
(800 X 600)
35.1
56
36
(800 X 600)
37.9
60
40
(800 X 600)
48.1
72
50
(800 X 600)
46.9
75
49.5
(800 X 600)
53.7
85
56.25
(1024 X 768)
48.4
60
65
(1024 X 768)
56.5
70
75
(1024 X 768)
60
75
78.75
(1280 X 768)
47.7
60
79.5
(1280 X 720)
37.5
50
74.25
(1280 X 720)
45
60
74.25
(1280 X 1024)
64
60
48.32
60
(1366 X768)
LCD
MONITOR
12 User s Manual
108
87.75
Pin assignment table of signal connector
Pin No.
Pin No.
Assignment
Red
Green
Blue
Ground
DDC 5V Standby
Cable Connection check
Ground-Red
Ground-Green
Ground-Blue
Assignment
T.M.D.S. Data2T.M.D.S. Data2+
T.M.D.S. Data2 Shield
No Connect
No Connect
DDC Clock
DDC Data
No Connect
Pin No.
10
11
12
13
14
15
Assignment
NC
Ground-Sync
Ground
DDC Data
H.Sync
V.Sync
DDC Clock
Pin No.
Assignment
13
No Connect
14
No Connect
15
Cable Connection check
16
Hot Plug Detect
17
T.M.D.S. Data018
T.M.D.S. Data0+
19
T.M.D.S. Data0 Shield
20
No Connect
T.M.D.S. Data1-
21
No Connect
10
T.M.D.S. Data1+
22
Cable Connection check
11
T.M.D.S. Data1 Shield
23
T.M.D.S. Clock+
12
No Connect
24
T.M.D.S. Clock-
Pin No.
Assignment
Coaxial S/PDIF audio signal
Ground
10
11
15
15pin D-Sub
Pin No.
Assignment
Ground
Speaker ID4
Speaker ID3
Speaker ID2
Speaker ID1
Speaker Out Left-
Speaker Out Left+
Speaker Out Right-
Speaker Out Right
16
17
24
24 Pin DVI-D
RCA
LCD
MONITOR
13 User s Manual
LCD
MONITOR
9 Pin D-sub
14 User s Manual
Specification
Model
LCD
Panel
Troubleshooting
FS-L4201C
Type
a-si TFT Active matrix
Screen Size
106.7cm (Diagonal)
Maximum Resolution
1366 X 768@ 60 Hz
Pixel Range
0.681(H) mm X 0.227(V) mm
Display Colors
16.7M (RGB 8-bit data)
Contrast Ratio
1000 : 1
Viewing Angle
89° / 89° / 89° / 89°
Response Time
10 msec
Luminance
500 cd/m
Synchro Horizontal Frequency
nization Vertical Frequency
Control key Rear side
SOURCE, -,+,
Compati
bility
Safety
Standard
& EMI
Dimension
Check the signal cable or signal Source.
(Refer to page 5)
Power LED is Red
85Hz (Max.)
300W
Under 20W
Video
Check the power connection.
(Refer to page 5)
91kHz (Max.)
Maximum
Power
Consumption standby Mode
Input
Signal
Power LED is dark.
No picture.
Remove and check attaches to the signal line
(Video extension cable and others)
and switch on.
Screen is not clear.
Analog RGB
DVI Digital
Audio
S/PDIF (Coaxial)
Video
VGA,SVGA,XGA,WXGA
Audio
IEC-958 S/PDIF 32kHz,44.1kHz,48kHz,96kHz
Safety Standard
UL,C-TICK,EK,CCC
EMI
CE,MIC,BSMI,FCC
Size and Weight
1022 615 98 / 29kg
Check the resolution and frequency of
computer and video card, and set up
again.Refer to the current monitor
mode and standard signal mode table.
(Refer to page 12)
Display is unstable and
trembling.
Adjust COLOR at User Mode in OSD Color
Temp Menu.
Color is irregular.
LCD
MONITOR
15 User s Manual
LCD
MONITOR
16 User s Manual
Warning
To prevent damage or loss, please read this warning carefully.
Double images or
'ghosts'.
Picture is dark.
Check the resolution and frequency of
computer and video card, and set up
again in reference to the current monitor
mode and standard signal mode table.
(Refer to page 5)
When connecting/disconnecting the plug, pull out
the plug itself, and never pull the cord to prevent fire
caused by short.
Adjust COLOR at User Mode in OSD Color
Temp Menu.
To prevent electric shock, do not connect/disconnect the plug with wet hand.
If you see smoke or smell something burning, stop
using the unit, switch off the power, pull out the plug,
and then contact your local service station.
To prevent fire, do not connect a large number of
equipments in a single line.
To prevent fire and electric shock, pull out the plug in
case of thunder and lightening.
To prevent fire and electric shock, do not try to take
the monitor apart or repair it yourself. Contact your
local service station or customer service center for
inspection, modification or repair.
LCD
MONITOR
17 User s Manual
LCD
MONITOR
18 User s Manual
19 - English

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2007:01:13 05:55:08+09:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2007:01:13 05:56:50+09:00
Metadata Date                   : 2007:01:13 05:56:50+09:00
Format                          : application/pdf
Title                           : Microsoft Word - ATT.E_MANUAL_.doc
Creator                         : Owner
Document ID                     : uuid:78d60e55-fabd-4be6-ae1a-a51935899d5a
Instance ID                     : uuid:5e16f817-ca3e-4302-b639-0f3ad7c6ba8b
Page Count                      : 12
Author                          : Owner

EXIF Metadata provided by EXIF.tools