DAYSYSTEM DS174 17" TFT LCD MONITOR User Manual Microsoft PowerPoint DS174RGB DVI SPK 050718 Eng
DAYSYSTEM CO., LTD. 17" TFT LCD MONITOR Microsoft PowerPoint DS174RGB DVI SPK 050718 Eng
USERS MANUAL
TFT-LCD MONITOR User Manual (17 INCH) Before operating the unit, please read this manual thoroughly and retain it for future reference. reference Advanced Color TFT LCD Monitor 17 inch SXGA TFT LCD Color Monitor The information presented in this document may form a part of quotation or contract under the agreement of both parties. Otherwise, this datasheet is subjected to be hanged without notice. Page 1 17 inch SXGA TFT LCD Color Monitor CONTENTS 0. Connections 1. Quick Start 2. U.S. FCC Class B Notice 3. Product Overview 4. Plug & Play 5. Usage Notice 6. Package Checklist 7. Front Button 8. OSD Operation 9. Troubleshooting 13 10. Specifications 14 11. Video Mode Support 15 LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify for any damage resulting from such improper use or sale. Page 2 17 inch SXGA TFT LCD Color Monitor 0. CONNECTIONS Speaker Audio Out Audio In Digital DVI (Option) Analog RGB PC / DVI Cable (option) PC / RGB Cable DC in 12V Adapter PC Sound Output Page 3 17 inch SXGA TFT LCD Color Monitor 1. QUICK START (1) Connect the 15-pin D-sub or DVI connector to the VGA port of PC. (2) Connect the opposite side of VGA cable to TFT LCD monitor. (3) Plug in the Audio cable to the proper connector of your monitor. (4) Plug in the power cord to AC/DC adapter power inlet and 110V / 220V consent. (5) Plug in the 12V DC output to TFT LCD monitor. 2. U.S. FCC CLASS B NOTICE Caution : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, if it is not installed or used by the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, that could be determined by tuning the equipment on and off, the user is encouraged to try to connect the interference with the following option: • • • • Re-orient or relocate the reception of antenna. Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that which the receiver is connected to. Consult the dealer or an experienced Radio / Television technician for help. NOTE: The manufacturer is not responsible for any Radio or TV interference caused by unauthorized modifications to equipment. Such modifications could void the user’s authority to operate the equipment. Page 4 17 inch SXGA TFT LCD Color Monitor 3. PRODUCT OVERVIEW This 17” SXGA TFT LCD Monitor, accepts standard analog RGB signal. This monitor supports SXGA and lower resolutions at the frame frequency up to 75Hz. Lower resolution modes can be expanded to full screen through the expansion algorithm. The user interface includes Audio, Display, Control, Auto Adjust, and additional features. This monitor contains high-end LCD controller, which have high performance and user friendly interfaces. Fancy design monitor makes your desk simple and luxury. The LCD monitor neither emits harmful rays nor requires space. Moreover, it conforms to VESA DPMS (Display Power Management Signaling) requirement, therefore energy consumption is remarkably little. Actual power consumption of LCD monitor is less than 35 watts during the operation, in contrast CRT monitor. These features guarantee you with safe, clean, and healthy environment. 4. PLUG & PLAY This monitor supports VESA DDC 1/2B requirements, therefore it is truly Plug-andPlay for all PCs. No hardware or software change needed. It finds optimum setting value automatically without any diskette installation by DDC process. • DDC Process Abbreviation of ‘Display Data Channel’. The format of data exchange between Monitor & VGA Card. Page 5 17 inch SXGA TFT LCD Color Monitor 5. USAGE NOTICE Warning Please do not open or disassemble the products, because it may cause electric shock. Please be advised all the warnings, precautions, and maintenance advice as recommended in this user’s manual in order to maximize the life of your monitor. Do: • • • • Turn off the monitor before cleaning its surface. Periodically wipe its surface with a soft and dry cloth. Use the quality and safety-approved AD/DC adapter. Disconnect the power plug from the AC outlet when the product is not in use for long time. Do not expose the monitor to: • • • • Extremely hot, cold, and humid environments during operation. Area susceptible to dust. Direct sunlight Abrasive cleaners, waxes, and solvents Page 6 17 inch SXGA TFT LCD Color Monitor 6. PACKAGE CHECKLIST LCD MONITOR * Attention Monitor and stand part are packed disassembled. Please be careful not to drop the stand part when you take the monitor out of protecting styrofoam. User’s Manual AC/DC Adaptor VGA Cable Page 7 Power Cord 17 inch SXGA TFT LCD Color Monitor 7. FRONT BUTTON MENU DOWN AUTO/SELECT UP OSD Function Button FUNTION STATE Power ON/OFF ON/OFF LED Indicates operation status Green (ON)/Red (Stand By Mode ) Orange (Flicker) : NO SIGNAL MENU Activate menu/Exit Menu Exit Sub-Menu/ Move to previous Menu BRIGHTNESS/CONTRAST/COLOR/ ETC… AUTO/ SELECT AUTO ADJUST ANALOG/DIGITAL AUTO Adjust DOWN Move Menu (Volume) Move Menu (Increase) Hot Key VOLUME UP Move Menu (Volume) Move Menu (Decrease) Page 8 17 inch SXGA TFT LCD Color Monitor 8. OSD OPERATION 8.1 BRIGHTNESS CONTROL - This control allows you to make adjustments to brightness of the display screen Menu > Left / Right Move to Brightness Control menu > Select Button (Selection of Menu) > Down / Up (Increase/Decrease Value) 8.2 CONTRAST CONTROL - This control allows you to make adjustments to the contrast of the display screen 8.3 H-POSITION - Select this control menu, and then use Down and Down buttons to center the image horizontally on the screen. Page 9 17 inch SXGA TFT LCD Color Monitor 8.4 V-POSITION - Select this control menu, and then use the Down and Up buttons to center the image vertically on the screen. 8.5 CLOCK - Select this control menu, and then use Down and Up buttons to optimize screen quality by removing noise. 8.6 CLOCK PHASE - Select this control menu, and then use Down and Up buttons to adjust the screen image until it looks focused, crisp and sharp. One of the good points of LCD Monitor. Page 10 17 inch SXGA TFT LCD Color Monitor 8.7 COLOR CONTROL - Select this control menu, then scroll to the desired color temperature among 9300K, 6500K or USER for custom setting. In User Mode, adjust R,G,B color control. 8.8 LANGUAGE - Select this control menu, choose from English (ENGLISH), German (DEUTSCH), Spanish (ESPAÑOL), Italian (ITALIANO), French (FRANÇAIS). 8.9 INFORMATION - Select this menu allows you to confirm information of the display. Page 11 17 inch SXGA TFT LCD Color Monitor 8.10 OSD - Select this control menu, and then use the button to select the duration time for the OSD menu. Use the ◀ and ▶ buttons to select the time, to center the OSD image horizontally & vertically on the screen. 8.11 AUTO ADJUST - This control will automatically make adjustments to the horizontal and vertical size, horizontal and vertical position, phase and color. Page 12 17 inch SXGA TFT LCD Color Monitor 9. Troubleshooting Warning Please do not open the monitor, because it may cause electric shock to the customer. Also, the warranty program may not support the damages, which user causes. When problem persists in spite of trying the following troubleshooting advice, please contact dealer or the repair center listed. Trouble and countermeasure LED doesn’t lit / No image Check if the display is in power saving mode. Check if the display is switched on or the power cable is properly connected. Image is unstable (Flicker, Interference, Noise, etc.) Check if signal cable is secured Check if frame (vertical) frequency of video signal is lower than 75Hz because this monitor can not run over 75Hz. In this case, please change the setting of ‘Display Control Panel’ of Windows to 60Hz, that displays the best performance. Dull image Adjust the Frequency or Phase. Adjust the frame (vertical) frequency to 60Hz. Remove any video signal distributor. Dark or saturated image Adjust the Brightness or Contrast. Page 13 17 inch SXGA TFT LCD Color Monitor 10. Specifications Model 17 inch SXGA TFT LCD Color Monitor Display Type Color Pitch Screen size Back light Resolution (max.) Contrast ratio Brightness 17” Color Active Matrix TFT LCD 16.7Million (8 bit/color) 0.264(H) x 0.264(W) mm 337.9(H) x 270.3.0(V) mm 4 CCFLs 1280 x 1024(SXGA) at 60 to 75Hz (Optimum 60Hz) 450:1 250 cd/m2 Video Sync frequency Input signal Viewing angle Compatibility Plug & Play Compatibility Power Management Operating Conditions Power Consumption Temperature Humidity User control OSD Vertical: 56 ~ 75Hz (Optimum 60Hz) Horizontal: 31.5 ~ 80KHz Analog RGB 0.714 VP-P, 15 Pin D-sub type Up/Down: 60º / 60º Right/Left: 70º / 70º VESA DDC 1/2B VESA / IBM / MAC VESA Standard, DPMS Operating: 35 watt max. Stand-by: 3.5 watt max. Operating: 0 ºC ~ 40 ºC Storage: -20 ºC ~ 60 ºC Operating: 10% ~ 85% R.H. Non-Operating: 90% R.H. Max. Menu /Select / Left / Right / Down / Up / Power Mechanical Size Weight Packed : 445 (W) x 210 (D) x 460 (H) mm Packed : 6.5 kg Page 14 17 inch SXGA TFT LCD Color Monitor 11. VIDEO MODE SUPPORT The modes are detected when presented to the input and previous alignments for setup are automatically recalled. A true multi-sync monitor emulation is implemented. The factory preset supported modes include: Mode*1 Resolution H-freq. Pixel freq. Remarks*1 VGA 640 x 350 70Hz 31.47KHz 25.175MHz VESA Standard VGA 720 x 400 59.940HZ 31.469KHZ 25.175MHZ IBM VGA 3H VGA 640 x 480 60Hz 31.5KHz 25.175MHz Industry Standard VGA 640 x 480 72Hz 37.9KHz 31.500MHz VESA Standard VGA 640 x 480 75HZ 37.5KHZ 31.500MHZ VESA Standard SVGA 800 x 600 60Hz 37.9KHz 40.000MHz VESA Guidelines SVGA 800 x 600 72Hz 48.1KHz 50.000MHz VESA Standard SVGA 800 x 600 75HZ 46.9KHZ 49.500MHZ VESA Standard XGA 1024 x 768 60Hz 48.4KHz 65.000MHz VESA Guidelines XGA 1024 x 768 70Hz 56.5KHz 75.000MHz VESA Standard XGA 1024 x 768 75HZ 60KHZ 78.750MHZ VESA Standard SXGA 1280 x 1024 60Hz 64.0KHz 108.000MHz VESA Standard SXGA 1280 x 1024 75HZ 80KHZ 135.000MHZ VESA Standard Notes: 1. 2. Refresh rate All mentioned modes are non-interlaced. The maximum and minimum frame rates are determined by the TFTLCD. Factory preset modes are overwritten by additional user alignments for automatic recall. At all times it remains possible to recall the initial factory presets. Page 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 15 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:1bcf8af5-9bed-4791-8923-a9c262e9f1f9 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2005:08:01 12:56:49+09:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2005:08:01 12:56:49+09:00 Document ID : uuid:1063f47f-c254-448d-8447-801633a8ffa1 Format : application/pdf Title : Microsoft PowerPoint - DS174RGB_DVI_SPK(050718)Eng Creator :EXIF Metadata provided by EXIF.toolsAuthor :