DBTEL orporated DB-2042S3 Mobile Phone User Manual 8055T English FCC
DBTEL Incorporated Mobile Phone 8055T English FCC
Contents
Manual 5 revised
Message he or she gets it. Read Reply: By Using this option, you 4. will receive a reply message telling you the receiver has read your MMS when the MMS is read. 5. This option stores the MMS sent to 6. you. This option stores the MMS failed to “YES” , the new MMS sent to you will be download automatically, or send, saved for sending later and sent the MMS will be stored in MMS successfully. 1. Pending: For storing the MMS failed center. Reject 7. to send. 2.Drafts: For storing the MMS saved for sending later. 3.Sent : For storing the MMS sent 8. 9. Configure Ads : You can reject advertisements in this option. Append Signature: If you want to add signature to MMS, please choose successfully. “YES”, then edit the signature text. Validity Period: If the MMS can’t be Please contact your network or service sent to the receiver in validity period provider for whether the data service is time, it will be removed from the MMS center. 10. MMS URL: You should input the provided and how to apply this service. Notice: Please set up the data link of network or service provider’s URL for MMS. The MMS center’s URL WAP before using MMS. You can refer to “WAP Settings”. Priority: Set the MMS’ priority to in China is as follow: http://mmsc.monternet.com high, normal or low. Sender Visibility : Through this function, you can decide whether let Report All the MMS reports are kept in this option. receivers know your number or 3. MMS when the MMS is read. Auto Download : There are two choices in this option. If you choose Outbox 2. reply message to you. Read Reply : By Using this option, you will receive a reply message telling you the receiver has read your Inbox 1. Reply Request : By Using this option, receivers will be requested to sent a identity. Delivery Report : By Using this UserFolder You can arrange your MMS in this option. It contains following functions: create new folders, rename folders and delete folders. option, you will receive a report telling you the receiver has received your MMS when he or she gets it. 23 Call meters Call meters Perform the procedures described in This option provides a record of call duration, call cost, recent calls and relevant settings. “Missed” for further operation. Some of the functions require the PIN2 code Dialed in order to access them. For information on the PIN2 code, please refer to “Security The last 10 outgoing phone calls, including the successful or unsuccessful calls that you Settings”. have made, are stored in the phone’s memory. Call meters This option lists the last 10 phone calls dialed. Perform the procedures described in “Missed” for further operation.. Missed Received Dialled Last call time __Off __On Last call time This function can set whether display Last call time or not after call.. Call alert Call alert __Off __ 1 minute __ 3 minutes __ 6 minutes __ 10 minutes Tones will alert you of the time elapsed every minute you talk on the phone. You may define the time or deactivate this function. Show call duration Show call duration __Outgoing __Incoming __Lifetime Provides the information on the total talk time of Dialed? Received? and all. It also enables you to reset the timer. During call __Off -__Time __Cost __Time & cost Duringcall This option shows the information on call duration, call cost, or both the call cost and the talk time, during a call on the LCD display. Charge rate Total cost Charge rate Displays the call cost for the last call and the Missed accumulated calls. You may reset the call cost The last 10 phone calls that you have not to restart a call charge. The PIN2 code is required to set the charge rate. answered are stored in the phone’s memory. You can select the following options: “Call”, “Save”, “Delete” and “Delete All”. Total cost Displays the balance of your call cost (the Received PIN2 code is required to access this function). The last 10 phone calls that you have answered are stored in the phone’s memory. 24 Profiles This option allows you to customise your handset settings for difference occasions. In idle mode, proceeds as follow: Profiles Volume level? Keytone? Keypad Volume. 1. Incoming call alert 1. Press (Menu) to enter main menu. 2. 3. Scroll to “Profiles” with Press (Select) to access the menu. This option allows you to set the mode of incoming call alert with the combination of vibrator and ring. 2. Incoming ringer This option allows you to set the mode of Profiles General __Activate __Settings Incoming ringer with the combination of vibrator and ring. 3. Alarm ringer Silent Outdoor Economic This option allows you to set the mode of Alarm ringer with the combination of vibrator and ring. Restore 1. General: Default setting of the handset 4. SMS ringer and it is used on normal occasion. 2. Silent: The ringtone of the handset is off. This option allows you to set the mode of SMS ringer with the combination of vibrator 3. Outdoor: The volume is set to maximum and ring. level. 4. Economic : The volume is set to 5. Volume level This option allows you to set Volume level. minimum level. 5. Restore : Restore factory settings. Contain Silent, Low, Medium, High. The following table shows you the default 6. Keytone This option allows you to set Keytone. setting for each profile. Contain 5 type. Profiles General Silent Volume level High Silent Keytone Keytone 3 Items Keypad 7. Keypad Volume In this option Keypad Volume can be set to Silent, Outdoor Economic Low, Medium or High. Medium High Low Date & Time Keytone Keytone Keytone Silent High Silent Volume Activate: Activate the Item select. Settings : contain Incoming call alert ? Incoming ringer? Alarm ringer? SMS ringer? 25 Date & Time This menu shows the options for setting the alarm, calendar, auto power on/off, date and time and its format, display mode (date and time are displayed on the LCD in idle mode), stopwatch, time zone, countdown and alarm at hour. You can find the default about this setting in the table of the handset setting default. Date & Time Alarm __Off __Only once __Everyday Calendar Date&time Display mode __No display __ Date only __ Time only __ Date&time Power off __Off __Only once __Everyday Format __Date format __Time format Stop watch T ime different Count down Alarm at hour Alarm Set the handset to ring at a specific time regardless the phone is switched on/off, with the desired ring tone. Off: Select “Off” to turn off the alarm function. Only once: Set the handset to ring at a specific time, and after that the alarm function will be turn off automatically ? everyday: set the alarm to ring at the specific time everyday. Calendar This option can be used to look up a date. Key in the year, month and day you would like to check or simply press (OK) and browse the date with Date&time Sets the appropriate date and time for the phone Displaymode Set how to display the date and time on the handset LCD when it is in idle mode. There are four option in this setting: No display: Neither date nor time is displayed on the LCD display when the phone is idle. Date Only Displays the date only on the LCD display when the phone is idle. Time Only: Displays the time only on the LCD display when the phone is idle. Date & Time: Displays both the date and time on the LCD display when the phone is idle. Power Off This option allows you to set the phone to switch off automatically at a specific time. 1. Select “Off” and press to turn off the auto power off function. 2. To active this function, Scroll to either “Once” or “Everyday” and press (Select). 3. Key in the time for shutting down using the HH:MM format, where HH is for hour and MM is for minute. 4. Press (OK). ! When the time is due, the message “Auto power off” will appear to inform you that the Date & Time phone is switching off before shutting down. Press (OK) to switch off the handset, 2. Press 3. Press (Start) to start counting. (Stop) to stop counting. press 4. Press (Renew) again to start a new (Exit) to continue using the handset. counting. ! When the counting is started and you have returned to idle mode, the handset will systematically stop counting. Format This option allows you to set the date and time display in different ways. Date format You may set the date format if decided to display the date when the handset is idle. Alarm At Hour If activated, the handset alerts you of the time every hour. Time format Set the clock system for display when the handset is idle. ! The date and time will not display if “No Display” is selected in Display Mode. Stopwatch This option provides you with a precise time count in 0.1s. 1. Press (Start) to start counting. 2. Press (Stop) again to stop counting. 3. Press again. (Restart) to start the counting (Count) to record down the yPress time up to three entries during counting. Time Zone 1. You may check the current local times all over the world. This handset lists some cities that represents the country/area that is in the same time zone. 2. Press (Select ) , you may set the time to be of system ,when you check the Time zone. Count down This option offers a countdown function. 1. Key in the time for counting down using HH:MM:SS format, where HH is for hour, MM is for minute and SS is for second. 27 Settings __PIN lock __Password Settings This menu shows the options for setting the functions related to Screen ? Phone setting ? Call setting ?Network ? Security ? Set short Set short cut __Up key short __Down key short __ Left key short __ Right key short cut. Settings Screen __ Wallpapers _ Wallpaper Everyday _ Wallpaper Screen This menu shows you the options for setting the wallpapers, background color, contrast, backlight duration and writing the welcome message for the phone when switching on. _ Colour __Brightness __Backlight _ Save Energe _ Back light Time Wall Papers This option allows you to change the __WelcomeNote embedded background pictures for the handset by preference. Phone Setting __Language __Input style __Own number __Auto redial __Anykey answer __Auto answer __Flip answer __Headset __Volume __GPRSincoming call __Battery State __Start -Up Tone __Factory set 1 Wallpaper Everyday : Displays the pictures you choose when the handset is idle and changes everyday automatically. 2 Wallpaper:Displays the background picture you set in this option when the handset is idle. The picture will not change until you modify it. Colour This option allows you to change the background colour by preference. You may Call setting __Call barring __Call waiting __Call divert __Own number choose from the 10 colours offered. Brightness This option allows you to adjust the contrast of the font and brightness of the display at 5 levels. Network __Preferred __Select mode Backlight This option allows you to activate or deactivate the background of LCD display Security __Phone lock 28 Settings and keypad illumination, set the duration time of the backlight illumination. Power Save Sets the backlight illuminates in power saving mode. If activated, the display will automatically for unsuccessful call up to ten attempts. Any key Answer If activated, press any key except and to answer the incoming call.. become darker when the phone is not in used for the duration set in the backlight duration. However when it reaches the Auto Answer If activated (with headset connected), any duration of the time set again, it will turn incoming call will be answered automatically into dark. If deactivated, the display will illuminate for 20 minutes and then become when the phone rings or vibrates for a few seconds.? dim. Back-light Duration Defines the duration of the illumination by preference. Flip Answer If activated, you can simply open the handset cover to answer phone calls. Headset You can choose “Speaker&headset ” and “Headset only”. Welcome Note: Writes your greeting message for your Volume handset. The welcome message will appear every time after you switch on the phone. Adjusts the earpiece volume during calls at 7 levels PhoneSetting GPRS incoming call This option allows you to set the following You can answer the incoming call when using GPRS. items by preference. Language Sets the language for display message. Battery state Languages vary upon the language package. You can not only query the battery status but also set the Battery Alarm in this option. Input style A number of input styles are provided for text Start-Up Tone editing. You can set the start-up Tone by preference. Factory set Own number Sets the Own number display on the Restores some of the functions set in the receiver’s mobile phone by preference. This phone to their original configuration. The data stored in the phone book will not be affected. function needs your network service provider’s support. For detailed information on factory default settings, refer to the table below. Auto redial If activated, the phone will redial 29 Settings Setting Default Options Settings provider for the password. Out going: Language English Status :Query about out going Input Predictive Refer style Text “setting” Earpiece Level 7 incoming calls can be accepted. Off Intl. Calls: All outgoing international calls are barred. Incoming calls can still be Items References functions’status. All Calls: All outgoing calls are barred; only to Volume Anykey accepted. Answer Auto Except home: When abroad, you can only call the numbers within that country or call Off Answer Flip to home country (i.e., the country where the On phone is registered). Deactivate: Cancel all outgoing call Answer Backlight Off (Save Refer to restriction functions. “Screen” In coming: Status: Query about incoming Energy) Display Off Mode Refer to Power Off Off 10 Date YYYY Mode /MM/DD Time 24 Hour All calls: All incoming calls are barred When roaming: No incoming calls will be permitted when registered with a system other than the original one. Deactivate: Cancel all incoming call Mode 12 Alarm At barring functions’status. “Date&Time” 11 barring restriction functions. Off Cancel all: Cancel all the call restriction functions. Hour Call Setting 2. Call Waiting This option alerts you of an incoming call 1.Call Barring This option provides SIM card restrictions while on line. If activated, a “Call Waiting” message and the caller number will notify when making or answering calls. A network access code is required to set all the barring functions (you must contact your service you of a new incoming call when you are on the phone. The availability depends on your network service provider. provider). Change Barring Code : Change the network access code (password) for call 1. Press to answer the waiting call (the active call will be placed on hold). barring. Check with your network service 30 Settings 2. Press add the available network also. to reject the waiting call. 3. Call Divert This option is set to divert incoming calls to 2. Select Mode: Select the network using the following modes: the voice mailbox (only for voice messages) Auto Search : It is the default mode for network registering. It usually searches for the network operators using the priority or another phone number, so as not to miss any important calls. There are four divert modes available which network list in “Preferred”. you can activate and cancel. You can check its current status at any time. Unconditional : Systematically divert all Manual Search: Select the network operator that has a roaming agreement with your network operator in your incoming calls. When Busy: Divert all incoming calls region/country. yOnce the “Manual Search” mode is when the line is busy (when you are on a selected, the register mode will not change call) or you have rejected the call. ! Call waiting must be disabled to usethis until you modify it or replace a new SIM card. divert function. No Reply: Divert all incoming calls if there is no reply (i.e. missed call). ! If you are not familiar with the network operator, it is strongly recommended that No Response : Divert all incoming calls you select “Auto Search” mode. when your phone is turned off or out of coverage. Security Cancel All: Cancel all the divert functions. A number of security features are provided to protect against any unauthorized use of your 4.. Own Number Sending SIM card and certain other features. You are able to change the PIN and PIN2 code, Chooses whether or not your phone number is sent to the called party. The availability depends on your network phone-lock code or decide whether a phone -lock code or PIN is requested while the phone is switched on service provider. 1. Phone Lock Network You can set whether a password is requested while the phone is switched on. You will be This is a network-related option. It allows you to register with, search, or select the available asked for the codes the next time you switch network and some of the relevant settings. on the phone if Phone Lock is on. The default factory phone lock code is “123456” and you 1. Preferred Allows you to browse, delete or edit the current network list, even more you can are allowed to change the code. yInput password then press 31 (OK). Settings 2. PIN lock (4 to 8 digits) You can open or close this function. PUK code does not come with your SIM card or you have lost it, please check with yThe PIN (Personal Identification Number) protects the SIM card against unauthorized use. Normally, the PIN code comes with your your service provider for the code. SIM card. If activated, you will be asked for yPIN2 You may change the PIN2 code in this the PIN every time you switch on the phone. Please consult your service provider for the option. The PIN2 code is provided together with the SIM card and is only used when PIN code accessing some specific options (such as 3. Password “Charge Rate”). It will only be available if SIM cards and the network service In this option, you can change password, provider propose this facility. Perform the PIN, PIN2. procedures described in “PIN lock” to change the PIN2 code. (1).Change phone lock: Key in the old code, press ! If an incorrect PIN2 code is entered 3 (OK) Key in the new code, press (OK) (2).Change PIN code : Key in the old code , press Key in a new code, press (OK) (OK) times in succession, the SIM card will be blocked automatically. Perform the procedure described above, but key in the PUK2 code instead of the PUK code. yPUK2( 8 digit ) Key in the new code again and press The PUK2 code is used to release and (OK) If an incorrect PIN code is entered 3 times in change the blocked PIN2 code. If an incorrect PUK2 code is entered 10 times in succession, the SIM card will be blocked succession, the SIM card will be blocked automatically. Perform the following steps to unblock the SIM card: 1. Key in the PUK code, press 2. Key in a new PIN code, press permanently. If the PUK2 code does not come with your SIM card or you have lost it, please check with your service provider (OK) (OK) for the code. 3. Key in the new PIN code again and press (OK) yPUK(8 digits) Setshortcut This option allows you to set the quick access ! The PUK (Personal Unblocking Key) code is used to release and change the function to the key for easy operation. blocked PIN code. If an incorrect PUK code The following table shows you the default is entered 10 times in succession, the SIM card will be blocked permanently. If the setting of the shortcut function: 32 Settings Items Key Default functions Up settings Key Wallpaper Key WAP Key Profile Key Inbox Short Down Short Left Short Right Short 33
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Copy, Fill forms, Extract, Assemble, Print high-res Modify Date : 2004:05:24 22:15:39+08:00 Create Date : 2004:05:24 22:14:41+08:00 Title : 8055T English User manual_FCC_.doc Author : POPO Creator : 8055T English User manual(FCC) - Microsoft Word Producer : Acrobat PDFWriter 5.0 for Windows NT Page Count : 11 Mod Date : 2004:05:24 22:15:39+08:00 Creation Date : 2004:05:24 22:14:41+08:00 Metadata Date : 2004:05:24 22:15:39+08:00 Has XFA : NoEXIF Metadata provided by EXIF.tools