DDPAI Technology MIX3 DDPAI User Manual

DDPAI Technology Co., Ltd DDPAI

User Manual

CAUTION PACKAGE CONTENTS PRODUCT OVERVIEW5. Use the installation tool to lift the edges of the windshield /molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable.6. Turn on the engine after installation, your Dash Cam will power up and start recording. Working status LED blinks in normal mode.USING THE DASH CAM视频预览、回放、下载App 设置材质：100g书纸 两面印刷尺寸：132*80mmDash CamInstallation ToolMount with 3M TapeUser ManualCar ChargerPower Cable Power ButtonUSB PortMount ConnectorLens2. Align the mount with the connector, and slide it towards until it clicks into place. 3.Remove the protective film from the back of the mount, attach the adhesive side of the mount on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view. As shown below.4.Adjust the angle of the lens by loosening the nut and rotating the camera. We recommend pointing the lens slightly downwards (≈10° below horizontal), so as to record video with a 6:4 road to background ratio. Tight the nut after adjusting.Control ButtonReset MICPower Button: Press and hold for 2 seconds to turn the device on/off. press one time to turn the IPS screen on/off while the Dash Cam is working.Parking Mode LED: Blinks slowly in parking mode. (solid on indicates USB data transmission mode).Working Status LED: Blinks slowly in normal working mode.ŸBoth LED are blinking quickly indicate memory card error.ŸBoth LED are solid on indicate firmware upgrading.Controller ButtonControl Buttons to navigate through user menu on the screen.Audio RecordSnapshotAlbumSettingBackPreviousNextOKYou can use/setup your Dash Cam via control buttons or DDPAI App.Control ButtonAfter connect and power on your Dash Cam, it will bring you to real-time screen. Here you can view recording status, current time, Wi-Fi status, audio status, battery remaining.Toggle “Audio” to turn on/off audio recording.Toggle “Snapshot” to capture photo during the video recording.Toggle “Album” to view photos and video clips.Toggle “Setting” to enter setting screen, as shown in below.6.1 PreviewŸThis device is designed to record video while the vehicle is in operation. It can record ultra HD video even when there weren’t streetlights around.ŸKeep the windshield and lens clean for optimal video quality. ŸDo not leave the device in vehicle without fixing firmly, fix device onto a clean windscreen where the vision is not blocked. Don't install device on air bag or within its working range.ŸOnly use the power cable provided by the manufacturer. Other power cable may cause short circuit, fire, or malfunctionŸThis device adopts build-in SD card, featuring in high efficiency, stability, long use life. The memory card should be formatted via App or PC regularly to maximize the lifetime of the memory card.ŸDo not adjust DDPAI Dash Cam or watch real time video via App while driving.ŸDo not install the product in a location where the product can interfere with the driver's field of vision.ŸImproper battery replacement my cause explosion, use the same type or battery to replace; Do not exposure battery (cell battery or Li battery) in the sunlight or such extremely hot environment; Do not damage, puncture the battery or put it in the fire, doing so may case explosion or toxic chemicals release.ŸThe product optimal temperature range (-20°C – 70°C/-4°F – 158°F), it provides high temperature protection function, it shuts itself down to prevent any damages at very extreme temperatures (working temperature range is 0°C-50°C/32°F – 122°F when powered by battery).ŸDo not disassemble or repair the product by yourself, contact our service expert in case of any issue.ŸThis Dash Cam can be used in other occasions despite in vehicle, supply by power adapter.ŸThe contents of this manual are for reference only. FacebookWi-Fi informationView Dash Cam Wi-Fi information: turn on/off camera Wi-Fi.Turn on: App can find and connect to camera Wi-Fi.Turn off: App can not find camera Wi-Fi.LoudspeakerTurn on: there will be voice guidance and alert/notification sounds.Turn off: there will be no voice guidance and alert/notification sounds.Parking MonitoringTurn on: When your car has been stationary for 15 minutes, Parking Monitoring is automatically activated, stay on for the selected time duration (select from App: 15 minutes, 1H, 6H, 24H, or no shut down), and automatically deactivated and switches back to continuous recording when there is a motion.Turn off: When your car has been stationary for 15 minutes, Dash Cam will automatically shut off.Working Status LEDParking Mode LEDMenu ScreenReal Time ScreenAudioSnapshotAlbumSetting3M Adhesive11WeChatIPS ScreenIdeal mount areaTuck in cableUser’s Manual6 Battery RemainingWi-Fi StatusNOTEŸAn extra hardwire kit need to be installed; or, no need hardwire kit at all if your car has an active cigar lighter (i.e. when car engine is off,the cigar lighter still supply power)ŸSelect parking monitoring time duration and turn on/off parking monitoring form App.After 60 sec stationarySelect “Real Time Screen”, “Time Display Screen” or “Locked” accordingly.FormatFormat the build-in memory card. Back up any files you wish to keep prior to formatting the SD card, as all footage will be deleted during this process. Files downloaded to your phone will be visible through the App.Download AppScan the QR card to download DDPAI Dash Cam App to use more feathers of the camera.AboutInstallation1. Clean the area on the windshield where the Dash Cam will be installed, otherwise it may fall off easily in later.When the Dash Cam detects impact while working, it will immediately store a clip 5 seconds prior and after the impact. The 10-second emergency recording is saved on the memory card under the "202emergency" folder, file name begin with ‘G’ (after 10 clips saved, the latest clip will replace the oldest clip).When the memory card fills up, the newest video files will start to replace the oldest video files , called loop recording (saved in build-in memory card in 1 minute segments), so you will always have the most recent video files.NOTEDash Cam sensitivity can be adjusted via App.NOTEŸThis App is certified virus-free by Google Play Store and Apple App Store, it does not contain malware, please list it in your trust application list.ŸWe don’t collect any kind of personal data, the information collected about you only for register purposes. ŸThe DDPAI App is available for devices running Android 4.0 and up, iPhone 4 and up, or iOS 7.0 and up.ŸSome customized Android smart phones need to turn off mobile data(3G,4G) to connect to Dash Cam via Wi-Fi, please be noted that the Dash Cam keeps working without connecting to smart phone.CameraAfter connecting your phone with the DDPAI Dash Cam Wi-Fi, open the App, from here you can add/delete Dash Cam, and preview, playback, download, snapshot, cropping etc.On the RoadDDPAI users community, it only need to connect to your smart phone data or home Wi-Fi. From here you can find nearby users, see the newest activities, user experience, installation tutorial etc.Sharing on Social MediaTaping on icon to share picture or video on social media like Facebook, Twitter.AlbumsView images, videos and emergency clips, you also can edit and share them from here.MeHardware settings, updating and help center.NOTECamera LCD screen will be locked while App accessing. After exit App, it will be unlocked automatically.2. Choose your DDPAI Dash Cam from the network list (For Android system, App will start to search Dash Cam network automatically. For iOS phone: turn on WALN from Settings > WLAN). The Dash Cam default SSID (or Wi-Fi name) begins with “vYou”, ends with it’s model (e.g. vYou_DDPai_mix3).3. Enter the password (the default password ‘1234567890’).4. Click ADD CAMERA, wait a few seconds until the preview screen show. NOTEDirect Wi-Fi will turn o n autom a t ical l y w hen the D a s h Cam tu r n on.6USING THE DASH CAM VIA APP55.1 Installing the Dash 6You can view in real-time the video currently being recorded by connecting your smart phone to the Dash Cam via direct Wi-Fi.1) Open the DDPAI App, and add your Dash Cam.2) Select Camera tap, then tap on button, this will bring you to preview page.NOTEŸThe download speed is about the same as the video playback speed. The video which is downloaded to the mobile phone is compressed, the HD video is stored on the build-in memory card.ŸEmergency G-Sensor video storage to emergency file video.ŸApp will automatically download the video which was not completely downloaded last time once connect to dash cam.ŸHD video is in MP4 format and can be viewed in the computer.6.2 Video Playback, Download video/images, etc.Aspect ratio settingResolution settingDownload images/video S h u tt e r b u t t o nTime line barRotate your smart phone or press expand icon, turn preview screen to landscape modeTIP: If the time line bar not display, tap on video screen.Video PlaybackTap and left/right drag time line bar at the screen bottom to create the starting point of the recording you wish to preview, then tap on thumbnail when you have made your selection, or wait for 3 sec for buffering, now you can watch the history recording.Resolution SettingsTap on FHD to set the video/ photo resolution, if the FHD icon is not showing, tap on the video screen.Download Image/Video FilesTap on from preview screen to select image or video to download. For image files:The emergency image and other image taken by Remote Snapshot can be downloaded automatically by: Going into Me-> Settings, turn on Auto Download Snapshot. However, image taken by Shutter Button will be always downloaded automatically.For video files: Drag timeline bar to create the starting point,T a p i t t o s t a r t d o w n l o ad T a p i t t o e n d d o w n l o a dAfter downloading, you can share it on social media or delete it.NOTEŸ You can download maximum of 5 minutes length clip.7MANAGE FILES VIA SMART PHONE6.1 Download Emergency Files1. Connect your Dash Cam to App.2. Tap on Camera, tap on , then you can select the emergency image or video files.6.1 Editing and Sharing image/video filesThe photo filters integrated into the DDPAI Dash Cam App is configured with 15 photo filters which can be applied to your photos.1. Tap on the album icon located at the bottom middle of the screen.2. Select or tap on the photos you wish to edit.3. Once selected, at the bottom of the screen there will be an icon that looks like a magic wand, this is the Modify icon.4. Tap on the Modify icon to open the photo editor. This will activate different photo filters. 5. Select the photo filter you would like to apply by tapping on the filter, on this screen, you also can add Subtitles and Frame like movies.7. Tap on save icon to apply. You can also share it on social media by taping on Share the picture button.8MANAGE FILES VIA PC1. Access memory card of your Dash Cam from PC with USB data cable.2. Double click on movable disk, open DCIM folder, there will be 4 folders under it:200video201photo202thumbNormal:20171019075657_78.mp4 The dash cam records in normalTime-lapse:S-20171019081231_2460_30.MP4It continuously recording footageat 1 frame per second, therefore15 minutes of footage can bereviewed in 30 seconds. Thecamera activates and startsrecording once detected motion.Motion :G_20171013101728_0003When motion is detected, itsaves a snapshot. L means thereis a video related to this photo.Snapshot:N_20171013101728_0003_X.jpgPhotos taken by Snapshot Buttonor App snapshot. X means thereis no video related to this photo.N_20171023134544_21_1 Thumbnails are automaticallyshown for event recording files.8SETTINGS1. Connect your Dash Cam with DDPAI App.2. Tap on Me->Settings->Camera Settings.Camera volumeUse the volume slider to adjust the Dash Cam volume.Microphone RecordingWhen turned off, the dash cam does not record audio.Video with SnapshotWhen turned on, the Dash Cam captures a still image and a clip in the 5 seconds prior to and subsequent to an snapshotting.Date and Time DisplayWhen turned on, There will be date and time display on the video and photo (as watermark) .Start up SoundMute the Dash Cam by toggle it off.Battery Protection for Parked VehiclesSelect a time duration, when your car has been stationary for 15 minutes, Parking Monitoring is automatically activated, stay on for the selected time duration, and automatically deactivated and switches back to continuous recording when there is a motion.G-Sensor SensitivityYou can adjust the sensitivity of the motion detection so minor motion caused by wind or rain doesn't trigger a snapshot. Automatic snapshot operates in conjunction with the Dash Cam’s inbuilt G-Sensor. In order for this to work correctly, G-Sensor must be ON.9FAQ1. Video RecordingQ1: Shall I keep the dash cam connected with my phone when it is working?A: The Dash Cam starts to record videos automatically when the car is started without needing to connect to your phone. However, if they are connected, you can preview, download, and playback the videos from the App on your phone.Q2: Why some of the Dash Cam video recordings are missing.A: Make use the App& firmware are the latest version. If there is “Storage exception” notification means the SD card is corrupted and need to be replaced.Q3: Why image is not clear in my smart phone?A: The video downloaded to your smart phone is compressed, you can review HD recordings via PC in MP4 format.2. Wi-Fi and App ConnectivityQ1: How to change the Wi-Fi name and password of the Dash Cam?A: Make sure your Dash Cam is connect to App, then go into Me->Settings->Camera Settings, tap on Camera Name to change your Wi-Fi name, tap on Camera Password to change your Wi-Fi password.Q2: WiFi is always disconnected?A: Go into Settings > Wi-Fi and hit the menu button, select Advanced, disable "Scanning always available" .If "Scanning always available" checkbox is checked, make sure your smart phone is near the Dash Cam.Make sure your devices are not surrounded by too many Wi-Fi networks.Q3: After connected with the Dash Cam Wi-Fi, why can't my Android access it's mobile data.A: Due to the settings of Android phones, mobile data is no longer available when it's connected to the Dash Cam Wi-Fi.Q4: Why cannot add camera/ adding camera failed?EndCannot add camera/ adding camera failedDash cam working LED blinks in redJust changed passwordAndroid: find dash cam from App camera list, re-enter password, add again iOS: Ignore dash cam Wi-Fi password from iPhone Wi-Fi list, enter new password and re-connect to dash cam Wi-Fi.Reset Dash Cam to default settingsReturn to dealerReset/ upgrade Dash Cam, issue solvedQ5:Why App cannot find Dash Cam Wi-Fi?App cannot find Dash Cam Wi-FiDash Cam working LED blinks in redDash Cam is available in Settings->WLAN/Wi-Fi listReset/ upgrade Dash Cam, issue solvedReset/ upgrade Dash Cam, issue solvedReturn to dealerRestart App, issue sovledEnable App permissions from Settings (sprocket) > Security and Privacy > Application Permissions, issue solvedincompatible, return to dealerInstalled third party App manager, find DDPAI and enable all permissions, issue solvedEndSPECFICATIONS11Hi3516E, H.265/H.264(default), 1080P@30fps2MP low illumination CMOS sensor6 G-glasses, 140° wide angle, F1.83 inch IPS screenWi-Fi/2.4GHzBuild-in eMMC high speed flash, loop recordingWireless video output, support Android/IOS deviceBuilt-in 3Gyo sensor, motion locking, adjustable sensitivity via App1920*1080 @30fps1920*1080512MbCPU:Image Sensor: Lens:Screen:Wi-Fi Module:Storage:Video Output:G-Sensor:Video Resolution:Photo Resolution:RAM:UPGRADE APP AND FIRMWARE1111.1 Upgrade the Firmware via AppOur App and camera firmware will be updated regularly, you can update the firmware via App. Please follow these steps to upgrade the DDPAI App and the latest firmware version onto the DDPAI Dash Cam.1. Open the Wi-Fi settings of your mobile device and connect to the Dash Cam via Wi-Fi.2. Once you are connected, launch the App. You will get a notification asking you to upgrade, accept to upgrade.3. If you don’t get the notification, you can tap on the Me in the lower right corner of the App to manually upgrade.Tap on see more to view more information about your Dash Cam. If an update is available, a will appear. Tap on the New firmware available to bring up the download page. If the App is the latest vision, a notification of “Current version is the latest” will pop-out.New11.2 Upgrade the Firmware via PC1. Access your Dash Cam via PC with USB data cable.2. Download the latest firmware for your camera, unzip and copy the content you have unzipped onto the build-in flash card.3. Power on the camera and it will apply the firmware automatically.NOTEŸYour Dash Cam’s two LED indicator should blink during the upgrading. ŸOnce the dash cam is done upgrading it will tell you that "Upgrade success". Do not power off your Dash Cam until it begins continuous recording as it may cause permanent damage to the Dash Cam.1. Video RecordingQ:What if the mount loses it’s stickiness?A: Make sure that it is firmly installed for the first time, otherwise it may fall off easily in later. If it falls off, clean the mounting area before re-attaching it to the windshield with the spare 3M adhesive.CUSTOMER SUPPORT12For customer support and firmware updates please visit www.en.ddpai.com.You can also email a Customer Support expert at feedback@ddpai.com.Find us on Facebook, Instagram at ddpaisocialcarcam.Or you also can contacts us on Facebook and WeChat by scanning below QR Code:7 89 10 11 12 13 14 1615Image my world If G-Sensor is triggeredIf G-Sensor is triggeredAuto Shutdown after X min/HAuto Shutdown after X min/HTime-lapse recordingNormal recordingNormal recording 15 minNormal recording 15 minTime-lapse recordNormal recordSearch for the DDPAI App in the Google Play Store or Apple App Install it on your smart phone.Tap the Allow button in the Authorization RequestAccept App access to your smart phone.Launch App and explore more.5.3 App Overview5.2 Installing the App Here is an overview of DDPAI Dash Cam App.5.4 Pair Smart Phone 1. Launch App, tap on Camera, then tap on
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving an　tenna. Increase the separation between the equipment and receiver.　 Connect the equipment into an outlet on a circuit different from that to which the 　receiver is connected. Consult the dealer or an experienced radio/TV technician for help.　 FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Navigation menu