DDPAI Technology MIX3 DDPAI User Manual
DDPAI Technology Co., Ltd DDPAI
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 4019231 |
| Application ID | i0dsiZOAvyHvy3KZBuTzcg== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 115.71kB (1446400 bits) |
| Date Submitted | 2018-09-26 00:00:00 |
| Date Available | 2018-09-26 00:00:00 |
| Creation Date | 2018-05-16 15:29:57 |
| Producing Software | Corel PDF Engine Version 19.1.0.419 |
| Document Lastmod | 2018-09-25 19:40:26 |
| Document Title | mix3海外说明书-20180503 - 转曲.cdr |
| Document Creator | CorelDRAW 2017 |
| Document Author: | 11 |
材质：100g书 纸 两 面 印 刷 尺寸：132*80mm Ÿ Image my world Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Ÿ Wi-Fi Status PACKAGE CONTENTS CAUTION This device is designed to record video while the vehicle is in operation. It can record ultra HD video even when there weren’t streetlights around. Keep the windshield and lens clean for optimal video quality. Do not leave the device in vehicle without fixing firmly, fix device onto a clean windscreen where the vision is not blocked. Don't install device on air bag or within its working range. Only use the power cable provided by the manufacturer. Other power cable may cause short circuit, fire, or malfunction This device adopts build-in SD card, featuring in high efficiency, stability, long use life. The memory card should be formatted via App or PC regularly to maximize the lifetime of the memory card. Do not adjust DDPAI Dash Cam or watch real time video via App while driving. Do not install the product in a location where the product can interfere with the driver's field of vision. Improper battery replacement my cause explosion, use the same type or battery to replace; Do not exposure battery (cell battery or Li battery) in the sunlight or such extremely hot environment; Do not damage, puncture the battery or put it in the fire, doing so may case explosion or toxic chemicals release. The product optimal temperature range (-20°C – 70°C/-4°F – 158°F), it provides high temperature protection function, it shuts itself down to prevent any damages at very extreme temperatures (working temperature range is 0°C-50°C/32°F – 122°F when powered by battery). Do not disassemble or repair the product by yourself, contact our service expert in case of any issue. This Dash Cam can be used in other occasions despite in vehicle, supply by power adapter. The contents of this manual are for reference only. Battery Remaining Working Status LED Time-lapse record Normal recording 15 min Time-lapse recording Auto Shutdown after X min/H Audio Control Button IPS Screen Snapshot If G-Sensor is triggered Album Normal record Setting Reset Car Charger Installation Tool MIC Power Button: Press and hold for 2 seconds to turn the device on/off. press one time to turn the IPS screen on/off while the Dash Cam is working. Toggle “Audio” to turn on/off audio recording. Toggle “Snapshot” to capture photo during the video recording. Toggle “Album” to view photos and video clips. Toggle “Setting” to enter setting screen, as shown in below. Working Status LED: Blinks slowly in normal working mode. 3M Adhesive Mount with 3M Tape Both LED are blinking quickly indicate memory card error. Both LED are solid on indicate firmware upgrading. Ÿ Ÿ Controller Button Control Buttons to navigate through user menu on the screen. PRODUCT OVERVIEW Real Time Screen Lens Audio Record Snapshot Album Setting Menu Screen Back Previous Next OK USB Port Power Button Search for the DDPAI App in the Google Play Store or Apple App Auto Shutdown after X min/H USING THE DASH CAM Mount Connector You can use/setup your Dash Cam via control buttons or DDPAI App. Control Button Parking Mode LED After connect and power on your Dash Cam, it will bring you to realtime screen. Here you can view recording status, current time, Wi-Fi status, audio status, battery remaining. User’s Manual Wi-Fi information View Dash Cam Wi-Fi information: turn on/off camera Wi-Fi. Turn on: App can find and connect to camera Wi-Fi. Turn off: App can not find camera Wi-Fi. Loudspeaker Turn on: there will be voice guidance and alert/notification sounds. Turn off: there will be no voice guidance and alert/notification sounds. Parking Monitoring Turn on: When your car has been stationary for 15 minutes, Parking Monitoring is automatically activated, stay on for the selected time duration (select from App: 15 minutes, 1H, 6H, 24H, or no shut down), and automatically deactivated and switches back to continuous recording when there is a motion. Turn off: When your car has been stationary for 15 minutes, Dash Cam will automatically shut off. NOTE An extra hardwire kit need to be installed; or, no need hardwire kit at all if your car has an active cigar lighter (i.e. when car engine is off,the cigar lighter still supply power) Ÿ Select parking monitoring time duration and turn on/off parking monitoring form App. Ÿ Tap the Allow button in the Authorization Request After 60 sec stationary Select “Real Time Screen”, “Time Display Screen” or “Locked” accordingly. 4.Adjust the angle of the lens by loosening the nut and rotating the camera. We recommend pointing the lens slightly downwards (≈10° below horizontal), so as to record video with a 6:4 road to background ratio. Tight the nut after adjusting. USING THE DASH CAM VIA APP 6.1 Preview You can view in real-time the video currently being recorded by connecting your smart phone to the Dash Cam via direct Wi-Fi. 1) Open the DDPAI App, and add your Dash Cam. 2) Select Camera tap, then tap on button, this will bring you to preview page. Video Playback Tap and left/right drag time line bar at the screen bottom to create the starting point of the recording you wish to preview, then tap on thumbnail when you have made your selection, or wait for 3 sec for buffering, now you can watch the history recording. Resolution Settings Tap on FHD to set the video/ photo resolution, if the FHD icon is not showing, tap on the video screen. Download Image/Video Files Tap on from preview screen to select image or video to download. MANAGE FILES VIA SMART PHONE 6.1 Download Emergency Files 1. Connect your Dash Cam to App. 2. Tap on Camera, tap on , then you can select the emergency image or video files. 200video 6.1 Editing and Sharing image/video files The photo filters integrated into the DDPAI Dash Cam App is configured with 15 photo filters which can be applied to your photos. 1. Tap on the album icon located at the bottom middle of the screen. 2. Select or tap on the photos you wish to edit. NOTE The download speed is about the same as the video playback speed. The video which is downloaded to the mobile phone is compressed, the HD video is stored on the build-in memory card. Ÿ Emergency G-Sensor video storage to emergency file video. Ÿ App will automatically download the video which was not completely downloaded last time once connect to dash cam. Ÿ HD video is in MP4 format and can be viewed in the computer. Ÿ After downloading, you can share it on social media or delete it. Aspect ratio setting 视频预览、回放、下载 Time line bar Shutter button NOTE You can download maximum of 5 minutes length clip. Ÿ 10 When motion is detected, it saves a snapshot. L means there is a video related to this photo. Snapshot: N_20171013101728_0003 _X.jpg Photos taken by Snapshot Button or App snapshot. X means there is no video related to this photo. N_20171023134544_21_1 Thumbnails are automatically shown for event recording files. SETTINGS Date and Time Display When turned on, There will be date and time display on the video and photo (as watermark) . Start up Sound Mute the Dash Cam by toggle it off. Battery Protection for Parked Vehicles Select a time duration, when your car has been stationary for 15 minutes, Parking Monitoring is automatically activated, stay on for the selected time duration, and automatically deactivated and switches back to continuous recording when there is a motion. Download App Scan the QR card to download DDPAI Dash Cam App to use more feathers of the camera. When the Dash Cam detects impact while working, it will immediately store a clip 5 seconds prior and after the impact. The 10-second emergency recording is saved on the memory card under the "202emergency" folder, file name begin with ‘G’ (after 10 clips saved, the latest clip will replace the oldest clip). When the memory card fills up, the newest video files will start to replace the oldest video files , called loop recording (saved in buildin memory card in 1 minute segments), so you will always have the most recent video files. MANAGE FILES VIA PC 1. Access memory card of your Dash Cam from PC with USB data cable. 2. Double click on movable disk, open DCIM folder, there will be 4 folders under it: 11 Camera volume Use the volume slider to adjust the Dash Cam volume. Microphone Recording When turned off, the dash cam does not record audio. 12 Albums View images, videos and emergency clips, you also can edit and share them from here. NOTE This App is certified virus-free by Google Play Store and Apple App Store, it does not contain malware, please list it in your trust application list. Ÿ We don’t collect any kind of personal data, the information collected about you only for register purposes. Ÿ The DDPAI App is available for devices running Android 4.0 and up, iPhone 4 and up, or iOS 7.0 and up. Ÿ Some customized Android smart phones need to turn off mobile data(3G,4G) to connect to Dash Cam via Wi-Fi, please be noted that the Dash Cam keeps working without connecting to smart phone. Ÿ Me Hardware settings, updating and help center. 5.4 Pair Smart Phone 1. Launch App, tap on Camera, then tap on 5. Use the installation tool to lift the edges of the windshield /molding and tuck in the power cable. Connect the Dash Cam to the car charger (plugged into cigarette lighter socket) and power cable. Tuck in cable Ideal mount area NOTE Camera LCD screen will be locked while App accessing. After exit App, it will be unlocked automatically. Installation 5.1 Installing the Dash 1. Clean the area on the windshield where the Dash Cam will be installed, otherwise it may fall off easily in later. Q2: WiFi is always disconnected? A: Go into Settings > Wi-Fi and hit the menu button, select Advanced, disable "Scanning always available" . If "Scanning always available" checkbox is checked, make sure your smart phone is near the Dash Cam. Make sure your devices are not surrounded by too many Wi-Fi networks. Q3: After connected with the Dash Cam Wi-Fi, why can't my Android access it's mobile data. A: Due to the settings of Android phones, mobile data is no longer available when it's connected to the Dash Cam Wi-Fi. Q4: Why cannot add camera/ adding camera failed? 6. Turn on the engine after installation, your Dash Cam will power up and start recording. Working status LED blinks in normal mode. NOTE D i rect Wi-Fi will turn o n a u t o matica l l y w h e n t he D ash C am t ur n on. 1. Video Recording Q:What if the mount loses it’s stickiness? A: Make sure that it is firmly installed for the first time, otherwise it may fall off easily in later. If it falls off, clean the mounting area before re-attaching it to the windshield with the spare 3M adhesive. App cannot find Dash Cam Wi-Fi Dash Cam working LED blinks in red 11 UPGRADE APP AND FIRMWARE Reset/ upgrade Dash Cam, issue solved Dash Cam is available in Settings>WLAN/Wi-Fi list Reset/ upgrade Dash Cam, issue solved Reset/ upgrade Dash Cam, issue solved Just changed password Return to dealer Enable App permissions from Settings (sprocket) > Security and Privacy > Application Permissions, issue solved Our App and camera firmware will be updated regularly, you can update the firmware via App. Please follow these steps to upgrade the DDPAI App and the latest firmware version onto the DDPAI Dash Cam. 1. Open the Wi-Fi settings of your mobile device and connect to the Dash Cam via Wi-Fi. 2. Once you are connected, launch the App. You will get a notification asking you to upgrade, accept to upgrade. 3. If you don’t get the notification, you can tap on the Me in the lower right corner of the App to manually upgrade. Tap on see more to view more information about your Dash Cam. If an update is available, a New will appear. Tap on the New firmware available to bring up the download page. If the App is the latest vision, a notification of “Current version is the latest” will pop-out. 1. Access your Dash Cam via PC with USB data cable. 2. Download the latest firmware for your camera, unzip and copy the content you have unzipped onto the build-in flash card. 3. Power on the camera and it will apply the firmware automatically. Reset Dash Cam to default settings Return to dealer 11.1 Upgrade the Firmware via App Installed third party App manager, find DDPAI and enable all permissions, issue solved NOTE Your Dash Cam’s two LED indicator should blink during the upgrading. Once the dash cam is done upgrading it will tell you that "Upgrade success". Do not power off your Dash Cam until it begins continuous recording as it may cause permanent damage to the Dash Cam. Ÿ Ÿ incompatible, return to dealer End End 14 11 SPECFICATIONS CPU: Image Sensor: Lens: Screen: Wi-Fi Module: Storage: Video Output: G- Sensor: Hi3516E, H.265/H.264(default), 1080P@30fps 2MP low illumination CMOS sensor 6 G-glasses, 140° wide angle, F1.8 3 inch IPS screen Wi-Fi/2.4GHz Build-in eMMC high speed flash, loop recording Wireless video output, support Android/IOS device Built-in 3Gyo sensor, motion locking, adjustable sensitivity via App Video Resolution: 1920*1080 @30fps Photo Resolution: 1920*1080 RAM: 512Mb 12 CUSTOMER SUPPORT For customer support and firmware updates please visit www.en.ddpai.com. You can also email a Customer Support expert at feedback@ddpai.com. Find us on Facebook, Instagram at ddpaisocialcarcam. Or you also can contacts us on Facebook and WeChat by scanning below QR Code: 11.2 Upgrade the Firmware via PC Restart App, issue sovled Android: find dash cam from App camera list, re-enter password, add again iOS: Ignore dash cam Wi-Fi password from iPhone Wi-Fi list, enter new password and re-connect to dash cam WiFi. 2. Choose your DDPAI Dash Cam from the network list (For Android system, App will start to search Dash Cam network automatically. For iOS phone: turn on WALN from Settings > WLAN). The Dash Cam default SSID (or Wi-Fi name) begins with “vYou”, ends with it’s model (e.g. vYou_DDPai_mix3). 3. Enter the password (the default password ‘1234567890’). 4. Click ADD CAMERA, wait a few seconds until the preview screen show. Q5:Why App cannot find Dash Cam Wi-Fi? Dash cam working LED blinks in red 2. Wi-Fi and App Connectivity Q1: How to change the Wi-Fi name and password of the Dash Cam? A: Make sure your Dash Cam is connect to App, then go into Me>Settings->Camera Settings, tap on Camera Name to change your Wi-Fi name, tap on Camera Password to change your Wi-Fi password. 13 Sharing on Social Media Taping on icon to share picture or video on social media like Facebook, Twitter. 5.3 App Overview NOTE Dash Cam sensitivity can be adjusted via App. FAQ Q3: Why image is not clear in my smart phone? A: The video downloaded to your smart phone is compressed, you can review HD recordings via PC in MP4 format. On the Road DDPAI users community, it only need to connect to your smart phone data or home Wi-Fi. From here you can find nearby users, see the newest activities, user experience, installation tutorial etc. Here is an overview of DDPAI Dash Cam App. Cannot add camera/ adding camera failed Q2: Why some of the Dash Cam video recordings are missing. A: Make use the App& firmware are the latest version. If there is “Storage exception” notification means the SD card is corrupted and 11 need to be replaced. Camera After connecting your phone with the DDPAI Dash Cam Wi-Fi, open the App, from here you can add/delete Dash Cam, and preview, playback, download, snapshot, cropping etc. About G-Sensor Sensitivity You can adjust the sensitivity of the motion detection so minor motion caused by wind or rain doesn't trigger a snapshot. Automatic snapshot operates in conjunction with the Dash Cam’s inbuilt GSensor. In order for this to work correctly, G-Sensor must be ON. 1. Video Recording Q1: Shall I keep the dash cam connected with my phone when it is working? A: The Dash Cam starts to record videos automatically when the car is started without needing to connect to your phone. However, if they are connected, you can preview, download, and playback the videos from the App on your phone. 3. Once selected, at the bottom of the screen there will be an icon that looks like a magic wand, this is the Modify icon. 4. Tap on the Modify icon to open the photo editor. This will activate different photo filters. 5. Select the photo filter you would like to apply by tapping on the filter, on this screen, you also can add Subtitles and Frame like movies. 7. Tap on save icon to apply. You can also share it on social media by taping on Share the picture button. Video with Snapshot When turned on, the Dash Cam captures a still image and a clip in the 5 seconds prior to and subsequent to an snapshotting. Resolution setting TIP: If the time line bar not display, tap on video screen. Motion : G_20171013101728_0003 Tap it to end download expand icon, turn preview Download images/video It continuously recording footage at 1 frame per second, therefore 15 minutes of footage can be reviewed in 30 seconds. The camera activates and starts recording once detected motion. App 设置 6.2 Video Playback, Download video/images, etc. Rotate your smart phone or press screen to landscape mode Time-lapse: S-20171019081231_2460_ 30.MP4 1. Connect your Dash Cam with DDPAI App. 2. Tap on Me->Settings->Camera Settings. For video files: Drag timeline bar to create the starting point, Tap it to start download The dash cam records in normal 201photo 202thumb For image files: The emergency image and other image taken by Remote Snapshot can be downloaded automatically by: Going into Me-> Settings, turn on Auto Download Snapshot. However, image taken by Shutter Button will be always downloaded automatically. Normal: 20171019075657_78.mp4 Accept App access to your smart phone. Launch App and explore more. Install it on your smart phone. If G-Sensor is triggered Format Format the build-in memory card. Back up any files you wish to keep prior to formatting the SD card, as all footage will be deleted during this process. Files downloaded to your phone will be visible through the App. Parking Mode LED: Blinks slowly in parking mode. (solid on indicates USB data transmission mode). Normal recording 5.2 Installing the App Power Cable Dash Cam User Manual Normal recording 15 min 2. Align the mount with the connector, and slide it towards until it clicks into place. 3.Remove the protective film from the back of the mount, attach the adhesive side of the mount on the windshield where it has an unobstructed view of the road but does not interfere with the driver’s view. As shown below. 15 16 Facebook WeChat FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.7 Linearized : No Author : 11 Create Date : 2018:05:16 15:29:57+08:00 Modify Date : 2018:09:25 19:40:26+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : 11 Title : mix3海外说明书-20180503 - 转曲.cdr Creator Tool : CorelDRAW 2017 Metadata Date : 2018:09:25 19:40:26+08:00 Producer : Corel PDF Engine Version 19.1.0.419 Document ID : uuid:6cb1fdd8-1810-47a5-ad3f-352957f2e393 Instance ID : uuid:41ef49a7-abec-4ecc-9385-c32c932c7b25 Page Count : 2 Profile CMM Type : Linotronic Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : Hewlett-Packard Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : Hewlett-Packard Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract)EXIF Metadata provided by EXIF.tools