DENSO Korea EG06330 IBU KEYLESS User Manual Information

Download:
Mirror Download [FCC.gov]
Document ID	3719071
Application ID	7m+yEPpTGLXm9DdERo54mg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	12.86kB (160692 bits)
Date Submitted	2018-01-18 00:00:00
Date Available	2018-07-18 00:00:00
Creation Date	2017-12-22 17:16:32
Producing Software	Adobe PDF Library 11.0
Document Lastmod	2017-12-22 17:39:36
Document Title	Information document
Document Creator	Wordìš© Acrobat PDFMaker 11
Document Author:	技術管理部

3.Outline of the system
Directly and indirectly controls various Indicator, Side mirror and Relay control related to
existing BCM function, controls start of vehicle when authentication of RKE key is
successful, and performs warning and notation processing of data received from TPS
sensor.
3.1. IBU NSMK
BCM function is a function for user convenience / warning, and it can directly or indirectly
control various indicators, sensor power, hot wire and relay control through
communication or switch input. It also performs Immobilizer function.
● Terminal control function: IGN1, IGN2, ACC power control
● Immobilizer function: Perform function for RKE Key authentication
● Head lamp washer relay control function - Optional function
● Indicator control function
● Auto light control function
● Puddle & Pocket Lamp control function
● Solenoid control function (ATM)
● PAS power control function
● LIN communication
● Chassis CAN communication (500kbps)
● Body CAN communicaton (500kbps)
3.2 Transponder Antenna:
Built in the Start Stop Button to communicate with the transponder by a base
station and using wireless communication :(134.2kHz)
3.3Installation in vehicle
The NSMK ECU is installed inside the vehicle.
NSMK
RF ANT
RF
Receiver
TP ANT
Transponder
Driver
Installation in vehicle
Fig. Outline of the System
Transponder Antenna
TX KEY
BCM with
RF Internal Antenna
RF Receiver
Fig. Installation of the System
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and receiver.
■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void
your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
IC Warning
"This device complies with Industry Canada licence-exempt RSS standard(s)."
Operation is subject to the following conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas provoquer de brouillage, et (2)
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 技術管理部
Create Date                     : 2017:12:22 17:16:32+09:00
Modify Date                     : 2017:12:22 17:39:36+09:00
Has XFA                         : No
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2017:12:22 17:39:36+09:00
Creator Tool                    :  Word용 Acrobat PDFMaker 11
Format                          : application/pdf
Title                           : Information document
Creator                         : 技術管理部
Document ID                     : uuid:89a066a2-b44d-49af-90ed-de08a1b3f360
Instance ID                     : uuid:a4b1da34-d917-4d42-9d0d-40e80fe3b8e8
Producer                        : Adobe PDF Library 11.0
Page Count                      : 3

EXIF Metadata provided by EXIF.tools