DENSO Korea FN00100 SMART FOB KEY User Manual US07 Brochure like
DENSO KOREA ELECTRONICS CORPORATION SMART FOB KEY US07 Brochure like
Users Manual
Electronic Key
Product Outline
Product Description
Product Type FN00100
RF characteristic Nominal frequency 433.92MHz
Oscillator frequency 13.081MHｚX-tal, PLL synthesizer
Antenna Built-in type (Fixed)
Button 4-Button type Lock
Unlock
Tailgate
Panic
Power Supply Nominal supply voltage 3V DC
Type of Battery One lithium battery
Electronic Key is mainly used for
locking or unlocking the doors of the
vehicle. Electronic Key detects
signals when it rea
ches the vicinity of
vehicle, and sends signals using radio
frequency.
Also, Electronic Key sends a radio
wave signal while a button is pushed.
When the button is released, the radio
wave signal is automatically off within
0.392
seconds. When the button is
depressed continuously, Electronic Key
sends a signal for a predetermined
constant time.
The receiver becomes active in
response to signals from the
transmitter. Unit: mm
Appearance
4-Button type
Manual Requirement of FCC / IC
Our product (FN00100) is one of vehicle parts. Therefore, we will not supply the user’s
manual. However, we will ask the vehicle manufacturer to include following statements in
the vehicle user’s manual in accordance with FCC and IC requirements.
1. Requirement for User Manual
1.1. FCC Requirement
1.1.1. In accordance with 15.21 of FCC rule, following statement will be included in the user’s
manual.
1.1.2. In accordance with requirement of FCC§15.19(a)(5), following statement will be
included in the user’s manual.
1.2. IC Requirement
1.2.1 In accordance with requirement of RSS-GEN, following statement will be included in
the user’s manual.
1.2.2. In accordance with requirement of RSS-310, following statement will be included in the
user’s manual.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device.
This device complies with RSS-3310 of Industry Canada. Operation is subject to the condition
that this device does not cause harmful interference.