DH Technology DH-R1 UHF Band RFID Reader (Low power transceiver - RX verfied) User Manual UserManual DH hwp
DH Technology, Inc. UHF Band RFID Reader (Low power transceiver - RX verfied) UserManual DH hwp
user manual re
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1374524 |
| Application ID | c5dCKjSB99uRGzdMpiAa+A== |
| Document Description | user manual re |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.38kB (217194 bits) |
| Date Submitted | 2010-11-11 00:00:00 |
| Date Available | 2010-11-11 00:00:00 |
| Creation Date | 2010-11-11 16:36:02 |
| Producing Software | Acrobat Distiller 7.0.5 (Windows) |
| Document Lastmod | 2010-11-11 16:36:02 |
| Document Title | UserManual_DH_ìˆ˜ì •.hwp |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | C0CCC0BABFF8 |
User Manual DH Technology ,Inc. Model : DH-R1 User Manual [Contents] 1. Summary 2. Composition 2.1 Devices Composition 2.2 System Composition 2.3 Outward Appearance of Device and Dimension 3. Specification of the System 3.1 RFID Tag 3.2 RFID Reader 4. Function of the System 5. Installation of the System 6. System Operation 7. Certification DH-Tech,Inc. Model : DH-R1 User Manual THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS. (1)THE DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE INTERFERENCE RECEIVED, AND (2)THIS INCLUDING DEVICE MUST ACCEPT INTERFERENCE THAT MAY ANY CAUSE UNDESIRED OPERATION. ALSO, TO PREVENT INTERFERENCE TO FEDERAL GOVERNMENT READER SYSTEMS, OPERATION GOVERNMENT RADAR SYSTEMS, OPERATION UNDER THE PROVISIONS OF THIS SECTION IS NOT PERMITTED WITHIN 40 KILOMETERS OF THE FOLLOWING LOCATIONS: DoD Radar Site Beale Air Force Base Cape Cod Air Force Station Clear Air Force Station Cavalier Air Force Station Eglin Air Force Base Latitude 39°08′10″N 41°45′07″N 64°55′16″N 48°43′12″N 30°43′12″N Longitude 121°21′04″W 070°32′17″W 143°05′02″W 097°54′00″W 086°12′36″W CAUTION : Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. The user of the device shall be responsible for submitting updated information in the event the operating location or other information changes after the initial registration by the grantee. The information provided by the grantee or user to the Commission shall include the name, address, telephone number and e-mail address of the user, the address and geographic coordinates of the operating location, and the FCC identification number of the device. The material shall be submitted to the following address: Experimental Licensing Branch, OET, Federal Communications Commission, 445 12th Street, SW., Washington, DC 20554, ATTN: RFID Registration. Professional installation is required. Installers are responsible for ensuring that the proper antenna is used as described in the FCC filing. and this product is for industrial use product. DH-Tech,Inc. Model : DH-R1 User Manual 1. Summary A) The RFID system for containers is composed of an "Active RFID Tag" and a "Reader", and the communication between the tag and reader follows Master-Slave model. B) Containers are embedded with 433.92Mhz RFID tag, and the reader, if necessary, gives wake-up signal, activates the RFID tag, so that it can obtain container-related information. C) The reader works according to the order of middleware or a terminal(or a computer). The communication air protocol between the reader and the tag follows ISO/IEC 18000-7. D) By using a RFID tag system, the recognition rate and recognition distance for containers is greatly improved, so that it can lay the foundation for the job automation of gate, CY storage, shipment, and Air Cargo. E) By making the best use of wireless/network technology, this system can be flexibly applied regardless of container's movement of position 2. Composition 2.1 Deceives Composition DH-Tech,Inc. Model : DH-R1 No. Model Name RFID Tag RFID Reader User Manual Type Remarks 433.92MHz active tag DH-ST1 Fixed type DH-R1 DH-Tech,Inc. Model : DH-R1 User Manual 2.2 System Composition 2.3 Dimension Section Contents ≫Dimension: 14.3cm*4.3cm*3.0 cm DH-ST1(DH Sensor Tag Type 1) ≫Dimension: 22.3cm*20.7cm*6.6cm DH-R1 (DH Reader Type 1) DH-Tech,Inc. Model : DH-R1 User Manual 3. Specification of the System 3.1 RFID Tag Tag Name DH-ST1 UHF Transceiver Frequency 433.92Mhz Modulation FSK Range 100m Power 3.6mW Tag Wake-up UHF Air Protocol ISO/IEC 18000-7 Memory Tag ID 4bytes(RO) User ID 16bytes(RW) User Memory Beacon Range(unobstructed) 128Kbytes yes ~100m Battery Type Volts/Material Life Re-Usable Non-replaceable, Non-rechargeable 3.6V/Lithium 3years(5 read events/day) yes Operation: -30℃ to +70℃ Temperature Storage: -40℃ to +70℃ Humidity 100% Condensing Approval KCC DH-Tech,Inc. Model : DH-R1 User Manual 3.2 RFID Reader Reader Name DH-R1 Case Material PC(Polycarbonate)/PBT(Polybuthylene Terephalate) Operating: -30℃ to +60℃ Environmental Temperature Storage: -40℃ to +80℃ Humidity 90% Condensing RF Frequency(Transceiver) 433.92Mhz Range Modulation FSK, deviation 35Khz for receiver, 50Khz for transmit Sensitivity 95 dBm IF Frequency 307.2Khz Data Rate 27.8Kbps Air Protocol RFID Tag Compatibility Network Interface Upgrades Diagnostics Up to 100m ISO/IEC 18000-7 All 433Mhz Active RFID Tags RS485, RS232 Supports firmware downloads Supports remote reader performance status reports Type Approval KCC Other Mounting Mounting Kit DH-Tech,Inc. Model : DH-R1 User Manual 4. Function of the System □ The communication protocol and operation between the reader and the tag follows ISO/IEC 18000-7. 5. Installation of the System □ Installation of the system(Container tag and Reader) follows ISO 10374.2 6. System Operation □ Basic Operation A reader(DH-R1) communicates with a server(or middleware) over TCP/IP, and communicates with a tag(DH-ST1) over RF. Orders sent via a server(or middleware) are transmitted to the reader(DH-R1), witch gives a wake-up signal, send the orders to the tag(DH-ST1), receives the response data from the tag(DH-ST1), and finally transmits them to the server(or middleware). 7. Certification □ FCCID : YWVDH-R1 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. DH-Tech,Inc.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2010:11:11 16:36:02+09:00 Create Date : 2010:11:11 16:36:02+09:00 Format : application/pdf Title : UserManual_DH_수정.hwp Creator :EXIF Metadata provided by EXIF.toolsDocument ID : uuid:1fa87bdb-e26f-49e3-90e3-652b1acb3962 Instance ID : uuid:b4fc966d-360a-4f37-ae9d-6db8d8452afd Page Count : 9 Author :