DIGI SINGAPORE IB3100 Base Station User Manual Manual
Teraoka Weigh-System Pte Ltd. Base Station Manual
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 985235 |
| Application ID | 1l7nlUATfTJ3aN2QxMTouQ== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 218.55kB (2731922 bits) |
| Date Submitted | 2008-08-14 00:00:00 |
| Date Available | 2008-08-14 00:00:00 |
| Creation Date | 2008-08-07 23:44:03 |
| Producing Software | itext-paulo (lowagie.com)[JDK1.1] - build 126 |
| Document Lastmod | 2008-08-08 15:10:27 |
| Document Title | Manual |
Trademark: DIGI Model Name: IB-3100 Product Name: Base Station Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2006/8/16 v1.0 Index [GENERAL INFORMATION] [PRODUCT INFORMATION] [TYPICAL OPERATION] [INFO SERVER ADMINISTRATOR MENU] [INFO PAD ADMINISTRATOR MENU] [CONTENTS] USER MANUAL Digi Info ESL Tentative 04 Ver. 0.18.080122.1 (Updated on 15/03/08) INFO SERVER ADMINISTRATOR MENU [Home] Info Server Administrator Menu is used by store people to do daily maintenance e.g. retrieves tag data, send display, sticker printing and etc. To use these operations (e.g. send display, sticker printing and etc), it is required for the user to program/design setting/format in the Info Server Serviceman Menu Screen in advance. PRICE TAG LISTING ITEM MANUAL KEY IN BARCODE DATA PRICE TAG [Home] [Up] Price Tag is used to view data/values that displayed on tag for each item, to print sticker and update data to single tag each time. ENTRY TO PRICE TAG OVERVIEW OF PRICE TAG ENTRY TO PRICE TAG [Home] [Up] 1. At the Info Cast Main Screen 2. Press [ADMIN] button to enter to Administrator Menu and enter to Price Tag screen Note: No "User Name" or "Password" required using this mode. ~ OR ~ 1. During in other screen 2. Press [PRICE TAG] button to go to Price Tag screen 3. Do operations as desired OVERVIEW OF PRICE TAG [Home] [Up] 1. 2. 3. EAN To search item by a EAN code (European article number) Scan barcode or enter value by keyboard and press [DISPLAY] button to search entered item data Note: To enter value by keyboard, user are required to follow Manual Key-in Barcode Data table Link ID To search item by a Link ID code Press [SEARCH] button to search entered item data Sales Price Display Sales Price of the searched item 4. Item Name Display item name of the searched item 5. Tag Display Screen Display searched item data on the Tag Display (depend on the tag format) Able to view 3 screen of tag for each item a) Active To view the data and value displayed in active screen Press [Active] Tab/button to view the active screen b) 1st Screen To view the data and value displayed in 1st screen Press [1ST SCREEN] Tab/button to view the 1st screen c) 2nd Screen To view the data and value displayed in 2nd screen Press [2ND SCREEN] Tab/button to view the 2nd screen d) Promo Screen 6. To view the data and value displayed in promotion screen Press [PROMO SCREEN] Tab/button to view the promo screen Send Display Press [SEND DISPLAY] button to enter Send Display screen To resend item data to tag, this function is useful when the tag is hang or display incomplete data Press [BACK] button to exit Send Display screen and return to price tag main screen a) [SEND 1ST W/O SYMBOL] button - to send the 1st screen numeric/digits data, without symbol e.g. decimal point, Sales message and etc to selected tag b) [SEND 1ST W/ SYMBOL] button - to send the 1st screen numeric/digits data, with symbol e.g. decimal point, Sales message and etc to selected tag c) [SEND 2ND SCREEN] button - to send the 2nd screen to selected tag 7. Printing To print sticker or paper tag for the selected item Press [PRINTING] button to enter Sticker & Paper Tag Printing screen Press [BACK] button to exit Sticker & Paper Tag Printing screen and return to price tag main screen a) [PRINT] button - to print sticker or paper tag for selected item b) [STICKER TYPE] selection - to select available sticker type for printing Note: Sticker type is required to be programmed in Sticker/Paper Tag Format Design in advance 8. Blinking Screen To set selected tag to blink tag displayed data Press [BLINKING SCREEN] button to enter Blinking Screen mode screen Press [BACK] button to exit Blinking Screen mode screen and return to price tag main screen a) [START] button - to start blinking tag display b) [STOP] button - to stop blinking tag display c) [SCREEN NUMBER] selection - to select page of tag to be displayed after stop blinking operation Note1: Press button, to select data from available list Note2: Click box to enter desired data Note3: Press [CLEAR] button to clear data retrieved or entered Note3: press button, to exit from Maintenance screen, Price/Transaction Maintenance screen. LISTING ITEM [Home] [Up] Listing Item is used to search data, to check error log, to print sticker and update data to multiple price tag. ENTRY TO LISTING ITEM OVERVIEW OF LISTING ITEM ENTRY TO LISTING ITEM [Home] [Up] 1. At the Info Cast Main Screen Note: No "User Name" or "Password" required using this mode 2. Press [ADMIN] button to enter to Administrator Menu and enter to Price Tag screen 3. Then press [LISTING ITEM] button to go to Listing Item screen 4. Do operations as desired OVERVIEW OF LISTING ITEM [Home] [Up] 1. 2. Search Range To select search range for searching item Initialized - To search items within initialized tag Not Initialized - To search items within items that not been initialized with tag All - To search all range of item (initialized and not initialized) Paper Tag Printed - To search item within item that has printed paper tag Note: The number in "(xx)", indicate number of items available for each search option type EAN To search item by a EAN code (European article number) Scan barcode or enter value by keyboard and press [DISPLAY] button to search entered item data Note: To enter value by keyboard, user are required to follow Manual Key-in Barcode Data table 3. Department Code To search item by department code Press [SELECT] button to view available department code Select department code and press [OK] button 4. 5. Sub-Department Code To search item by sub-department code Press [SELECT] button to view available sub-department code Select sub-department code and press [OK] button Class Code To search item by class code Press [SELECT] button to view available class code Select class code and press [OK] button 6. Item Name To search item by a Item Name data 7. Supplier Code To search item by a Supplier Code 8. Promo Code To search item by a Promotion Code 9. Optional Search To enable/disable use of Optional Search options 10. Tax Rate To search item by a Tax Rate value 11. Unit Price Member To search item by a Unit Price Member value 12. Ordinary Price To search item by a Ordinary Price value 13. Sales Price To search item by a Sales Price value 14. Unit Price To search item by Unit Price value range 15. Display To search and display according to entered search setting in above settings (see Search Item Display screen) Press [DISPLAY] to go to Search Item Display screen Note: Press [LISTING ITEM] button to exit Search Item Display screen i) SEND DISPLAY to send data to selected tag from the search list Press [SEND DISPLAY] button to enter Send Display screen To resend item data to tag, this function is useful when the tag is hang or display incomplete data Press [BACK] button to exit Send Display screen and return to price tag main screen a) [SEND 1ST W/O SYMBOL] button - to send the 1st screen numeric/digits data, without symbol e.g. decimal point, Sales message and etc to selected tag b) [SEND 1ST W/ SYMBOL] button - to send the 1st screen numeric/digits data, with symbol e.g. decimal point, Sales message and etc to selected tag c) [SEND 2ND SCREEN] button - to send the 2nd screen to selected tag Note1: Check box select tag and item to be send display for updating tag display Note2: Press [BACK] button to exit and return to Search Item Display screen ii) Printing Press [PRINTING] button to enter Printing screen To print sticker or paper tag for the selected item Press [BACK] button to exit Printing screen and return to price tag main screen a) [PRINT] button - to print sticker or paper tag for selected item b) [STICKER TYPE] selection - to select available sticker type for printing Note1: Sticker type is required to be programmed in Sticker/Paper Tag Format Design in advance Note2: Check box select tag and item to be send display for updating tag display Note3: Press button, to select data from available list Note4: Press [BACK] button to exit and return to Search Item Display screen iii) Blinking Screen Press [BLINKING SCREEN] button to enter Blinking Screen mode screen To set selected tag to blink tag displayed data Press [BACK] button to exit Blinking Screen mode screen and return to price tag main screen a) [START] button - to start blinking tag display b) [STOP] button - to stop blinking tag display c) [PAGE NUMBER] selection - to select page of tag to be displayed after stop blinking operation. Note1: Check box select tag and item to be send display for updating tag display Note2: Press button, to select data from available list Note3: Press [BACK] button to exit and return to Search Item Display screen 16. LOG NAK Press [LOG NAK] button to view list of tag with acknowledgment error for 1st screen of tag When the Info base did not receive acknowledgment from the tag during updating, it will record the tag info on the list a) [SEND 1ST W/O SYMBOL] button - to send the 1st screen numeric/digits data, without symbol e.g. decimal point, Sales message and etc to selected tag b) [SEND 1ST W/ SYMBOL] button - to send the 1st screen numeric/digits data, with symbol e.g. decimal point, Sales message and etc to selected tag Note1: Check box select tag and item to be send display for updating tag display Note2: Press [BACK] button to exit and return to Listing Item Screen 17. LOG NAK 2 Press [LOG NAK 2] button to view list of tag with acknowledgment error for 2nd screen of tag When the Info base did not receive acknowledgment from the tag during updating, it will record the tag info on the list Press [SEND] button to send the 2nd screen display to selected tag Note1: Check box select tag and item to be send display for updating tag display Note2: Press [BACK] button to exit and return to Listing Item Screen 18. Log Sticker To print sticker or paper tag for the selected item Item data send to sticker log by Info System when required to print a new sticker, this apply when sticker format data been updated a) [PRINT] button - to print sticker or paper tag for selected item b) [STICKER TYPE] selection - to select available sticker type for printing Press [LOG STICKER] button to view list of sticker required for printing Note1: Sticker type is required to be programmed in Sticker/Paper Tag Format Design in advance Note2: Check box select tag and item to be send display for updating tag display Note3: Press button, to select data from available list Note4: Press [BACK] button to exit and return to Listing Item screen 19. View Extra Screen To set all tag displayed in selected screen mode Press [VIEW EXTRA SCREEN] button to set tag displaying screen a) [VIEW 2ND] button - to set tag to be display in 2nd Screen b) [VIEW 1ST] button - to set tag to be display in 1st Screen Note: Press [BACK] button to exit and return to Listing Item screen Note1: Press button, to select data from available list Note2: Click box to enter desired data Note3: Press [CLEAR] button to clear data retrieved or entered Note3: press Maintenance screen. button, to exit from Maintenance screen, Price/Transaction MANUAL KEY IN BARCODE DATA [Home] [Up] Barcode data (EAN) can be manually key-in using keyboard, but required to key in as bellow table. And depend on the number of digits entered, the system will consider the barcode used as the barcode type and search data within a valid number configuration. No. Keyboard Entered Digits Valid Number Barcode Type 1. 13 digits 13 digits EAN-13 2. 12 digits 0 + 12 digits / 12 digits UPC-A 3. 11 digits 00 + 11 digits / 11 digits UPC-A 4. 10 digits 00 + 10 digits + CD / 10 digits UPC-A If the first digit is Zero, cut first and last digit = 6 digits UPC-E 5. 8 digits 6. 7 digits 7. 6 digits If first digit is not Zero, use 8 digit = 8 digits EAN-8 If the first digit is Zero, cut first digit = 6 digits UPC-E If the first digit is not Zero, cut last digit = 6 digits UPC-E 6 digits UPC-E
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No XMP Toolkit : 3.1-701 Create Date : 2008:08:07 23:44:03-08:00 Modify Date : 2008:08:08 15:10:27+08:00 Metadata Date : 2008:08:08 15:10:27+08:00 Producer : itext-paulo (lowagie.com)[JDK1.1] - build 126 Format : application/pdf Document ID : uuid:1502befe-418e-405f-a3d4-89c3610aa084 Instance ID : uuid:75d8c86c-c479-4c61-9031-80ff54d45097 Page Count : 37EXIF Metadata provided by EXIF.tools