DIGI SINGAPORE IFT2120 INFOTAG 2.0 User Manual
Teraoka Weigh-System Pte Ltd. INFOTAG 2.0
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1943414 |
| Application ID | /Pl4taIS8spjcAeUKrw1cw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 40.13kB (501640 bits) |
| Date Submitted | 2013-04-18 00:00:00 |
| Date Available | 2013-04-18 00:00:00 |
| Creation Date | 2017-10-27 19:40:46 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-10-27 19:40:46 |
| Document Title | User Manual |
| Document Creator | Microsoft® Word 2010 |
| Document Author: | OngSG |
SERVICE MANUAL IFT-2120 INFOTAG 2.0 IFT-2120 COPYRIGHT © 2010 TERAOKA WEIGH-SYSTEM PTE LTD Table of Content i) Notice ................................................................................................................................................. 1 ii) Safety Information .............................................................................................................................. 2 iii) Safety Regulations ............................................................................................................................. 2 1. General ............................................................................................................................................................. 5 1.1 Model Specification ............................................................................................................................ 5 1.2 Operating Specification ...................................................................................................................... 5 2. Dimension ........................................................................................................................................................ 6 3. IFT-2120 Setup Diagram & Spec Setting ...................................................................................................... 7 3.1 Overall Layout and Label design ......................................................................................................... 7 3.2 Exploded View ....................................................................................................................................... 8 3.3 Replacement of Info Tag Battery .......................................................................................................... 9 3.4 Button Cell Specifications ...................................................................................................................... 9 3.5 ESL Attachment (Refer to ESL Attachment Catalogue) ....................................................................... 9 3.6 Product Handling of Info Tag ................................................................................................................. 9 4. Revision Records .......................................................................................................................................... 10 i) Notice DIGI® The material contained in this document is proprietary and for information only and is subject to change without notice. Teraoka Weigh-System assumes no responsibility for any errors or damages arising from misinterpretation of any procedure. Screen displays, operating procedures and supporting features might vary with different software version releases. This document shall not be reproduced whether in part or whole without the written consent from Teraoka Weigh-System Pte Ltd. Teraoka Weigh-System Pte Ltd 4, Leng Kee Road #06-01 SIS Building Singapore 159088 ii) Safety Information The operator of the equipment shall comply with the safety and warning indications and procedures outlined in this document. Teraoka Weigh-System Pte Ltd assumes no responsibility or liability for failure to comply with these requirements. Repair and servicing of product, shall only be carried out by trained and qualified personnel. Disclaimer: Specifications are subject to change without notice. All dimensions shown are approximate. Please be aware that Teraoka has indicated that its hardware and software used in the product may require additional updates in the future as our product is continually under development. The need for such updates most likely applies to the Printer software. CAUTIONS: FOR PLUGGABLE EQUIPMENT, THAT THE SOCKET-OUTLET SHALL BE INSTALLED NEAR THE EQUIPMENT AND SHALL BE EASILY ACCESSIBLE. POUR LE MATÉRIEL RACCORDÉ PAR PRISE DE COURANT, LE SOCLE DE PRISE DE COURANT DOIT ÊTRE INSALLÉ À PROXIMITÉ DU MATÉRIEL ET DOIT ÊTRE AISÉMENT ACCESSIBLE. FOR CONTINUED PROTECTION AGAINST RISK OF FIRE, REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE. POUR NE PAS COMPROMETTRE LA PROTECTION CONTRE LES RISQUES D’INCENDIE, REMPLACER PAR UN FUSIBLE DE MÊME TYPE ET DE MÊME CARACTÉRISTIQUES NOMINALES. DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER. DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS IL Y A DANGER D’EXPLOSION S’IL Y A REMPLACEMENT INCORRECT DE LA BATTERIE. REMPLACER UNIQUEMENT AVEC UNE BATTERIE DU MÊME TYPE OU D’UN TYPE RECOMMANDÉ PAR LE CONSTRUCTEUR. METTRE AU RÉBUT LES BATTERIES USAGÉES CONFORMÉMENT AUX INSTRUCTIONS DU FABRICANT. iii) Safety Regulations Federal Communication Commission Interference Statement FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IDA Compliance Statement: (Singapore) This equipment registered to comply with IDA (Info-Communications Development Authority of Singapore) Standard under Dealer’s Class License. Actual size 9mm (H) x 17mm (W) Industry Canada statement: This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. For Taiwan 警語： 經型式認證合格之低 率射頻電機，非經許可，公司 商號或使用者均不得擅自變更頻率 大 率或變更原設計之特性及 能 低 率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停 用，並改善至無干擾時方得繼續使用 前項合法通信，指依電信法規定作業之無線電通信 低 率射頻電機須忍受合法通信或工業 科學及醫療用電波輻射性電機設備之干擾 IFT2120 Service Manual 1. General 1.1 Model Specification Model IFT-2120 (INFOTAG 2.0) Dimensions (in mm) Infotag LCD Size Display Window LCD Resolution Weight 26g approx. (Info Tag) Power Source DC Cell Button Battery 3.0V Operating Temperature 0 °C to +40 °C Humidity 85% Max. Non-condensing IP Rating IPX5 Battery Specification Type Nominal Voltage Life Time Weight 1.2 65.4 (L) X 39.0 (H) X 11.5 (W) 57.0mm x 28.8mm 46.8mm x 23.0mm 200 x 96 dots CR2450 (Cell Button Battery) 3.0V 5 years (1 update/day) 6.6g approx. Operating Specification External NA Internal CR2450 (Cell Button Battery) Operating Temperature 0ºC to +40ºC Humidity 85% Max. Non-condensing Power Source IFT2120 Service Manual 2. Dimension Info Tag (IFT-2120) IFT2120 Service Manual 3. IFT-2120 Setup Diagram & Spec Setting 3.1 Overall Layout and Label design Info Tag (IFT-2120) Front View Back View IFT2120 Service Manual 3.2 Exploded View Info Tag (IFT-2120) Front Cover LCD & PCBA Back Cover Battery Cover Battery Cover Note: This product is fully sealed by Ultrasonic Welding process. (Above the information is only reference for factory and Technical department.) IFT2120 Service Manual 3.3 Replacement of Info Tag Battery Location of Battery in Info Tag Battery Cover Battery Info Tag i. ii. Pull off the battery cover from back of the Info Tag. Replace the new battery. (Ensure the Battery polarity is correct) Caution: Dispose of the Battery according the Safety Guideline. i. ii. iii. iv. v. Avoid placing the battery in reverse polarity. Do not heat or dispose of fire. May burst or release toxic material. Do not charge. Do not short circuit. Do not solder the battery directly. 3.4 Button Cell Specifications 3.5 ESL Attachment (Refer to ESL Attachment Catalogue) For all information about the ESL Various Attachment type, function, installation etc. Please refer to ESL Attachment Catalogue 3.6 Product Handling of Info Tag Handle product with care. Do not expose product to corrosive chemical solution, any organic solvent acidic or alkaline. If cleaning is required, wash only water or mild soap solution. Do not attempt to disassemble, apply force or heavy load to the product. No user serviceable parts inside. IFT-2120 Service Manual 4. Revision Records Serial No. Date Edition Status 001 002 003 JAN 13 MAR 13 APRL 00 01 02 Description of Changes First Release ADD IC STATEMENT UPDATE FCC STATEMENT 10 Software Version Remarks V0.01 Tentative Edition
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : OngSG Create Date : 2013:04:17 15:03:21+08:00 Modify Date : 2013:04:17 15:04:52+08:00 Language : zh-TW Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Creator : OngSG Creator Tool : Microsoft® Word 2010 Metadata Date : 2013:04:17 15:04:52+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:94fa035c-dcbd-4c6a-863c-abf546a32fc7 Instance ID : uuid:617ab6a6-d4b2-47a2-a899-c396ae682f8e Page Count : 12EXIF Metadata provided by EXIF.tools