DIGILINK GROUP 007FIT Smart Watch User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3042458
Application ID	yLHTG1lxRjCV4V7CGp/xHQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	96.76kB (1209531 bits)
Date Submitted	2016-06-28 00:00:00
Date Available	2016-06-28 00:00:00
Creation Date	2016-06-14 14:16:00
Document Lastmod	2016-06-23 11:48:32
Document Title	User Manual
Document Creator	WPS Office
Document Author:	changlin he

Smart Watch
DW-007FIT+
E-ink display bracelet DW-007fit+ Manual
1.Specification:
Model
DW-007fit+
CPU
nRF51822 ARM Cortex M0 32bit
Display
1.28 inch 128*128 pixel E-ink display
Sports type
24 kinds of sports recording
Waterproof
IP67 waterproof
Charging
3 point connect charge DC 5V/0.12A
Function
Dynamic heart rate measure,Sleep monitor.Sedentary
remind,Pedometer,Distance,Calorie,Remote camera
control,Call remind, SMS notifications from Facebook,Twitter,
Skype etc.
2.Compatibility：
Bluetooth 4.0;
Android 4.4 or above ;
IOS 7.1 or above.
3.Power on and wear:
A.Press and hold the screen until it displays.
(If there is still no response, please try again after charging)
B. Put the bracelet on the wrist (Appropriate wear mode will greatly
improve the accuracy of heart rate acquisition)
4.Features:
24 kinds of Sports：
bowling
pull-up
dance
golf
Skiing
body building
Badminton
Skipping
table tennis
push-up
surfing
mountaineering
basketball
volleyball
shuttlecock
walking
sit-up
rock climbing
football
skating
yoga
Steps:
Distance:
Calories:
heart rate:
5.Interaction:
A. Operation mode: sliding up and down, sliding around, long press the
screen
Icon
B. Operate the bracelet
Function
Operation
Dial pictures optional
Long press and slide to
Test heart rate automatic.
choose dial pictures.
Long press to shift
Find your phone
on/off.
Long press
6.Application download:
Search “Linksmart” on Apple store or Google play to install it.
IOS
Android
7.Connect APP with bracelet:
Connection Method 1:
1.Keep Bluetooth on.
2.Find menu
and then slip vertically to find the QR code.
3. Long press to amplify the QR code.Find the code in it.
4.Open APP, Click the 【Device】 In the bottom of main interface.
5.In the page of 【Device】,click the “+”in the top right corner.
6. Search and connect the code showed on QR code.
For example: The code is 5151 in the Braceli7-5151.
IOS:
Android:
Connection Method 2:
1.Long press to amplify the QR code in bracelet.Find the code in it.
2.Open APP, Click the word【Device】In the bottom of main interface.
3.In the left corner of【Device】, Choose the
to scan the QR code.
8.Choose sports type:
1.Click the word【Activity】in the main interface.
2.In the【Activity】page,click the “+” to add sport type. You can choose
any five type sports besides walking among 24 types sports. You can set
sports target and reminder time.
9.Setting:
1.Click the word【Device】in the bottom of main interface.
2.In 【 Device 】 page,click the connected bracelet using,setting below
items.
Sports Monitor :
Sports Monitor:
App will keep your record everyday,average data of a week,a month
and a year. Record steps and distance when walking,calculate total
excerise time and burned calories by all sports.
Sleeping Monitor:
In histogram,the blue column is light sleep time,purple column is deep
sleep time.
Heart rate monitor:
Dynamic heart rate monitor: Aerobic,Anaerobic exercise,Fat
burning,Cardiopulmonary exercise.
10.Power Charging
Please place the Magnetic Charging Cable on the back of the Smart band
(as shown in the figure ).Plug it into the power adapter, or 5V/500mA(or
above) standard USB adapter. For example: Laptop、USB adapter、Bank
Power and others. When wristband screen appears
icon,which
means is being charged.
Place the Magnetic Charging Cable on the reverse side.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
o Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifcations to this device not explicitly approved by manufacturer could void
your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirement. The device can be used in
portable exposure condition without restriction.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Format                          : application/pdf
Creator                         : changlin he
Description                     : 
Title                           : 
Comments                        : 
Company                         : 
Source Modified                 : D:20160614141600+06'16'
Create Date                     : 2016:06:14 14:16+06:00
Creator Tool                    : WPS Office
Modify Date                     : 2016:06:23 11:48:32+08:00
Metadata Date                   : 2016:06:23 11:48:32+08:00
Keywords                        : 
Producer                        : 
Document ID                     : uuid:d923a1b4-da4a-4890-8a08-56820bfa8677
Instance ID                     : uuid:64a22946-3753-4fcb-abff-2be0e2040e11
Page Count                      : 11
Subject                         : 
Author                          : changlin he
Trapped                         : false

EXIF Metadata provided by EXIF.tools