DJI Matrice 600 Pro Specs, FAQ, Tutorials And S User Manual M600 Release Notes En 20190226

2019-02-26

User Manual: DJI Matrice 600 Pro Specs, FAQ, Tutorials and s - DJI M600 Pro Release Notes

Open the PDF directly: View PDF .
Page Count: 9

Download
Open PDF In Browser	View PDF

DJI MATRICE 600 PRO Release Notes
Date :

2019.02.26

Aircraft Firmware :

V 01.00.01.67

DJI GO App :

iOS V 3.1.52 (2968), Android V 3.1.50 (713)

DJI Assistant 2 :

V 1.2.4

What’s New?
Aircraft Firmware:
 Added support for the function of stopping motors mid-flight when using Onboard SDK.

Notes!
 No Intelligent Flight Battery firmware update required.
 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

http://www.dji.com/matrice600-pro
Copyright © 2019 DJI All Rights Reserved.

DJI MATRICE 600 PRO Release Notes
Date :

2018.04.17

Aircraft Firmware :

V 1.0.1.66

DJI GO App :

iOS V 3.1.31, Android V 3.1.30

DJI Assistant 2 :

V 1.1.7

What’s New?
Aircraft Firmware:
 Improved altitude measuring precision by lowering barometer drift rate.

Notes!
 No Intelligent Flight Battery firmware update required.
 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

http://www.dji.com/matrice600-pro
Copyright © 2019 DJI All Rights Reserved.

DJI MATRICE 600 PRO Release Notes
Date :

2017.10.24

Aircraft Firmware :

V 1.0.1.65

DJI GO App :

iOS V 3.1.18, Android V 3.1.11

DJI Assistant 2 :

V 1.1.6

What’s New?
Aircraft Firmware:
 Increased flight safety.
 Fixed issue of output error when F channel input is 0.
 Fixed issue that part of the flight record has been lost.
 Fixed issue where the abnormal heading is displayed incorrectly in the DJI GO app when using the A3 Pro
flight controller with D-RTK.

Notes!
 No Intelligent Flight Battery firmware update required.
 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

http://www.dji.com/matrice600-pro
Copyright © 2019 DJI All Rights Reserved.

DJI MATRICE 600 PRO Release Notes
Date :

2017.08.16

Aircraft Firmware :

V 1.0.1.60

DJI GO App :

iOS V 3.1.14, Android V 3.1.10

What’s New?
Aircraft Firmware:
Aircraft Functions
 For increased safety, the flight is restricted to a height of 30 m and distance of 50 m when not connected
or logged into the app during flight, including DJI GO* and all apps compatible with DJI aircraft.
 Aircraft will now exit Return to Home (RTH) if GPS signal is weak and re-enter RTH if GPS signal is
regained.
 Added motor collision detection at low altitudes. The aircraft will stop the motors if a collision is detected
while the aircraft is at an altitude lower than 2 m above the takeoff point.
 Added customized Playback and Record button functions on the remote controller that can be mapped in
DJI Assistant 2 software.**
 Added compass interference and ESC error displays to DJI GO* and warning alarms for the remote
controller.
 Added a function that detects whether or not D-RTK antennas are installed correctly.
 Added an Aircraft Status Indicator display for D-RTK signal quality. The LED will blink red (alternating with
the flight mode pattern) if signal is weak.
 Disabled control smoothing when switching from P-mode to A-mode.
 Updated no-fly zones.
 Optimized no-fly zone whitelisting.
 Optimized distance limitations, which are disabled by default and can be enabled in the app.
 Optimized propulsion output.
 Fixed an issue where the aircraft could automatically takeoff and land when idling on the ground.
 Fixed a rare issue causing battery level calculation errors.
 Fixed an issue leading to invalid GPS signatures.
 Fixed issue where D-RTK data in the DJI GO app displayed incorrectly.
 Fixed altitude drops caused by lost D-RTK data during Waypoint flight with the DJI GO app or DJI GS Pro.
(Continued on next page)
*The latest version of DJI GO is required.
**Soon-to-release DJI Assistant 2 software is required.
http://www.dji.com/matrice600-pro
Copyright © 2019 DJI All Rights Reserved.

DJI MATRICE 600 PRO Release Notes
(Continued from the first page)
Onboard SDK Functions (v3.3 is required)
 Added multi-functional channel outputs and inputs.
 Added several options that allow more data to be pushed, including a high-frequency (400 Hz) push
setting.
 Users can now subscribe data.
 Enhanced interface sampling synchronization for external sensors.
 Updated takeoff, landing, and RTH interfaces.
 Added angular rate control.
 Optimized logic for regaining control.

Notes!
 No Intelligent Flight Battery firmware update required.
 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

http://www.dji.com/matrice600-pro
Copyright © 2019 DJI All Rights Reserved.

DJI MATRICE 600 PRO Release Notes
Date :

2017.05.02

Aircraft Firmware :

V 1.0.1.20

Lightbridge 2 Air System Firmware :

V 1.1.60

Remote Controller Firmware :

V 1.2.10

DJI GO App :

iOS V 3.1.10, Android V 3.1.5

DJI Assistant 2 :

V 1.1.1

What’s New?
Aircraft Firmware:
 Added support for version matching between DJI Assistant 2 and flight control system.
 Added SDK activation through DJI Assistant 2.
 Added GPS information recording when taking stills with a third-party camera connected to a Ronin-MX
and Matrice 600 Pro.
 Improved barometer self-checking.
 Optimized motors initialization.
 Optimized GPS information encoding.
 Optimized battery cell voltage difference detection.
 Optimized the switching mechanism for the redundancy system.
 Optimized redundant ESC signal transmission detection.
 Optimized SDK communication logic.
 Optimized aircraft attitude control in the SDK.
 Optimized SDK activation and version matching.
 Fixed incorrect altitude control definitions in the SDK.
 Fixed an issue where whitelisted No Fly Zones couldn’t be unlocked.
 F1 to F8 channel values for the flight controller will now remain unchanged after remote controller is signal
lost.

Lightbridge 2 Air System & Remote Controller Firmware:
 Optimized video downlink to improve AV input display quality in low latency mode.

(Continued on next page)

http://www.dji.com/matrice600-pro
Copyright © 2019 DJI All Rights Reserved.

DJI MATRICE 600 PRO Release Notes
(Continued from the first page)

Notes!
 Intelligent Flight Battery firmware update required.
 Be sure to use the latest version of DJI Assistant 2 to configure the Matrice 600 Pro.
 Ensure that the remote controller and Lightbridge 2 Air System have the latest firmware.
 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

DJI MATRICE 600 PRO Release Notes
Date :

2017.02.14

Lightbridge 2 Air System Firmware :

V 1.1.50

Remote Controller Firmware :

V 1.2.00

DJI GO App :

iOS V 3.1.5, Android V 3.1.3

DJI Assistant 2 :

V 1.0.9

What’s New?
Firmware:
 Added support for the Matrice 600 Series Remote Controller Channel Expansion Kit.
 Added support for switching gimbal operation modes when using the Ronin-MX on Matrice 600 Pro using
the slave remote controller (requires the latest Ronin-MX firmware).
 Fixed an issue causing a blurred screen.

DJI MATRICE 600 PRO Release Notes
Date :

2017.01.05

Aircraft Firmware :

V 1.0.0.80

DJI GO App :

iOS V 3.1.2, Android V 3.1.1

DJI Assistant 2 :

V 1.0.9

What’s New?
Firmware:
 Added Front LEDs ON/OFF option in the DJI GO app.
 Added support for the Matrice 600 Series Remote Controller Channel Expansion Kit*.
 Added support for 2195 propellers (2500m above Sea Level only).
 Added channel mapping for the camera shutter in the map application, and GPS information recording when
taking stills.
 Optimized flight control performance.
 Optimized IMU calibration functions.
 Optimized compass error check functions.
 Optimized the smart ECS communication check functions.
 Optimized the switching mechanism for the redundancy system.
 Optimized SDK data pushing.
 Added support for switching gimbal operation modes when using the Ronin-MX on Matrice 600 Pro using
the slave remote controller (requires the latest Ronin-MX firmware).

Notes!
 Be sure to use the latest version of DJI Assistant 2 to configure the Matrice 600 Pro.
 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.
 No Intelligent Flight Battery firmware update required.

* Soon-to-release remote controller firmware is required.

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 9
Language                        : zh-CN
Tagged PDF                      : Yes
Author                          : DJI
Creator                         : Microsoft® Word 2013
Create Date                     : 2019:02:26 11:41:45+08:00
Modify Date                     : 2019:02:26 11:41:45+08:00
Producer                        : Microsoft® Word 2013

EXIF Metadata provided by EXIF.tools

DJI Matrice 600 Pro Specs, FAQ, Tutorials And S User Manual M600 Release Notes En 20190226

Navigation menu

Versions of this User Manual:

Views

Navigation