DJI Matrice 600 Pro Specs, FAQ, Tutorials And S  User Manual M600 Release Notes En 20190226

User Manual: DJI Matrice 600 Pro Specs, FAQ, Tutorials and s - DJI M600 Pro Release Notes

Open the PDF directly: View PDF .
Page Count: 9

DJI MATRICE 600 PRO Release Notes

http://www.dji.com/matrice600-pro

Copyright © 2019 DJI All Rights Reserved. 1

Date :

2019.02.26

Aircraft Firmware :

V 01.00.01.67

DJI GO App :

iOS V 3.1.52 (2968), Android V 3.1.50 (713)

DJI Assistant 2 :

V 1.2.4

What’s New?

Aircraft Firmware:

 Added support for the function of stopping motors mid-flight when using Onboard SDK.

Notes!

 No Intelligent Flight Battery firmware update required.

 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

DJI MATRICE 600 PRO Release Notes

http://www.dji.com/matrice600-pro

Copyright © 2019 DJI All Rights Reserved. 2

Date :

2018.04.17

Aircraft Firmware :

V 1.0.1.66

DJI GO App :

iOS V 3.1.31, Android V 3.1.30

DJI Assistant 2 :

V 1.1.7

What’s New?

Aircraft Firmware:

 Improved altitude measuring precision by lowering barometer drift rate.

Notes!

 No Intelligent Flight Battery firmware update required.

 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

DJI MATRICE 600 PRO Release Notes

http://www.dji.com/matrice600-pro

Copyright © 2019 DJI All Rights Reserved. 3

Date :

2017.10.24

Aircraft Firmware :

V 1.0.1.65

DJI GO App :

iOS V 3.1.18, Android V 3.1.11

DJI Assistant 2 :

V 1.1.6

What’s New?

Aircraft Firmware:

 Increased flight safety.

 Fixed issue of output error when F channel input is 0.

 Fixed issue that part of the flight record has been lost.

 Fixed issue where the abnormal heading is displayed incorrectly in the DJI GO app when using the A3 Pro

flight controller with D-RTK.

Notes!

 No Intelligent Flight Battery firmware update required.

 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

DJI MATRICE 600 PRO Release Notes

http://www.dji.com/matrice600-pro

Copyright © 2019 DJI All Rights Reserved. 4

Date :

2017.08.16

Aircraft Firmware :

V 1.0.1.60

DJI GO App :

iOS V 3.1.14, Android V 3.1.10

What’s New?

Aircraft Firmware:

Aircraft Functions

 For increased safety, the flight is restricted to a height of 30 m and distance of 50 m when not connected

or logged into the app during flight, including DJI GO* and all apps compatible with DJI aircraft.

 Aircraft will now exit Return to Home (RTH) if GPS signal is weak and re-enter RTH if GPS signal is

regained.

 Added motor collision detection at low altitudes. The aircraft will stop the motors if a collision is detected

while the aircraft is at an altitude lower than 2 m above the takeoff point.

 Added customized Playback and Record button functions on the remote controller that can be mapped in

DJI Assistant 2 software.**

 Added compass interference and ESC error displays to DJI GO* and warning alarms for the remote

controller.

 Added a function that detects whether or not D-RTK antennas are installed correctly.

 Added an Aircraft Status Indicator display for D-RTK signal quality. The LED will blink red (alternating with

the flight mode pattern) if signal is weak.

 Disabled control smoothing when switching from P-mode to A-mode.

 Updated no-fly zones.

 Optimized no-fly zone whitelisting.

 Optimized distance limitations, which are disabled by default and can be enabled in the app.

 Optimized propulsion output.

 Fixed an issue where the aircraft could automatically takeoff and land when idling on the ground.

 Fixed a rare issue causing battery level calculation errors.

 Fixed an issue leading to invalid GPS signatures.

 Fixed issue where D-RTK data in the DJI GO app displayed incorrectly.

 Fixed altitude drops caused by lost D-RTK data during Waypoint flight with the DJI GO app or DJI GS Pro.

(Continued on next page)

*The latest version of DJI GO is required.

**Soon-to-release DJI Assistant 2 software is required.

DJI MATRICE 600 PRO Release Notes

http://www.dji.com/matrice600-pro

Copyright © 2019 DJI All Rights Reserved. 5

(Continued from the first page)

Onboard SDK Functions (v3.3 is required)

 Added multi-functional channel outputs and inputs.

 Added several options that allow more data to be pushed, including a high-frequency (400 Hz) push

setting.

 Users can now subscribe data.

 Enhanced interface sampling synchronization for external sensors.

 Updated takeoff, landing, and RTH interfaces.

 Added angular rate control.

 Optimized logic for regaining control.

Notes!

 No Intelligent Flight Battery firmware update required.

 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

DJI MATRICE 600 PRO Release Notes

http://www.dji.com/matrice600-pro

Copyright © 2019 DJI All Rights Reserved. 6

Date :

2017.05.02

Aircraft Firmware :

V 1.0.1.20

Lightbridge 2 Air System Firmware :

V 1.1.60

Remote Controller Firmware :

V 1.2.10

DJI GO App :

iOS V 3.1.10, Android V 3.1.5

DJI Assistant 2 :

V 1.1.1

What’s New?

Aircraft Firmware:

 Added support for version matching between DJI Assistant 2 and flight control system.

 Added SDK activation through DJI Assistant 2.

 Added GPS information recording when taking stills with a third-party camera connected to a Ronin-MX

and Matrice 600 Pro.

 Improved barometer self-checking.

 Optimized motors initialization.

 Optimized GPS information encoding.

 Optimized battery cell voltage difference detection.

 Optimized the switching mechanism for the redundancy system.

 Optimized redundant ESC signal transmission detection.

 Optimized SDK communication logic.

 Optimized aircraft attitude control in the SDK.

 Optimized SDK activation and version matching.

 Fixed incorrect altitude control definitions in the SDK.

 Fixed an issue where whitelisted No Fly Zones couldn’t be unlocked.

 F1 to F8 channel values for the flight controller will now remain unchanged after remote controller is signal

lost.

Lightbridge 2 Air System & Remote Controller Firmware:

 Optimized video downlink to improve AV input display quality in low latency mode.

(Continued on next page)

DJI MATRICE 600 PRO Release Notes

http://www.dji.com/matrice600-pro

Copyright © 2019 DJI All Rights Reserved. 7

(Continued from the first page)

Notes!

 Intelligent Flight Battery firmware update required.

 Be sure to use the latest version of DJI Assistant 2 to configure the Matrice 600 Pro.

 Ensure that the remote controller and Lightbridge 2 Air System have the latest firmware.

 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

DJI MATRICE 600 PRO Release Notes

http://www.dji.com/matrice600-pro

Copyright © 2019 DJI All Rights Reserved. 8

Date :

2017.02.14

Lightbridge 2 Air System Firmware :

V 1.1.50

Remote Controller Firmware :

V 1.2.00

DJI GO App :

iOS V 3.1.5, Android V 3.1.3

DJI Assistant 2 :

V 1.0.9

What’s New?

Firmware:

 Added support for the Matrice 600 Series Remote Controller Channel Expansion Kit.

 Added support for switching gimbal operation modes when using the Ronin-MX on Matrice 600 Pro using

the slave remote controller (requires the latest Ronin-MX firmware).

 Fixed an issue causing a blurred screen.

DJI MATRICE 600 PRO Release Notes

http://www.dji.com/matrice600-pro

Copyright © 2019 DJI All Rights Reserved. 9

Date :

2017.01.05

Aircraft Firmware :

V 1.0.0.80

DJI GO App :

iOS V 3.1.2, Android V 3.1.1

DJI Assistant 2 :

V 1.0.9

What’s New?

Firmware:

 Added Front LEDs ON/OFF option in the DJI GO app.

 Added support for the Matrice 600 Series Remote Controller Channel Expansion Kit*.

 Added support for 2195 propellers (2500m above Sea Level only).

 Added channel mapping for the camera shutter in the map application, and GPS information recording when

taking stills.

 Optimized flight control performance.

 Optimized IMU calibration functions.

 Optimized compass error check functions.

 Optimized the smart ECS communication check functions.

 Optimized the switching mechanism for the redundancy system.

 Optimized SDK data pushing.

 Added support for switching gimbal operation modes when using the Ronin-MX on Matrice 600 Pro using

the slave remote controller (requires the latest Ronin-MX firmware).

Notes!

 Be sure to use the latest version of DJI Assistant 2 to configure the Matrice 600 Pro.

 Aircraft settings will be reset after firmware update. Remember to reconfigure the settings.

 No Intelligent Flight Battery firmware update required.

* Soon-to-release remote controller firmware is required.