DLP Design 0LP8C RFID Tag Reader User Manual LP8C Users Manual

Download:
Mirror Download [FCC.gov]
Document ID	936818
Application ID	lZApxO6lAMv7pjsxMV1U1A==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.48kB (68478 bits)
Date Submitted	2008-05-05 00:00:00
Date Available	2008-05-05 00:00:00
Creation Date	2008-05-01 23:00:26
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2008-05-01 23:00:26
Document Title	Microsoft Word - LP8C Users Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	janderson

DLP-RFID-LP8C
FEATURES:
•
•
•
•
•
•
•
•
•
•
ISO 15693, 18000-3, Tag-it™ HF-I Compatible
Read the UID/SID of Up To 15 Tags Simultaneously
13.56MHz Reader/Writer
8 channels for external antenna connections
FCC/IC/CE Modular Approvals Pending
USB Port Powered from Windows, CE, or Linux PC
Optional RS232 Interface
USB Interface; No Driver Development Required for Windows, CE, or Linux PC
Operating Temperatures: 0°C to 70°C
Dimensions: (L x W x H) 4.36” x 3.32” x .6”
APPLICATIONS:
•
•
•
•
•
•
•
Real-Time Security
Personal Identification
Pharmaceutical Tracking
Inventory/Asset Management & Tracking
Library/Book Management & Tracking
Baggage Tagging
Sports Event Timing
1.0 INTRODUCTION
The DLP-RFID-LP8C is a low-cost, USB-powered
module for reading from and writing to ISO
15693, ISO 18000-3, and
Tag-it™ intelligent RFID transponder tags via up
to 8 external antennas. It has the ability to both
read and write up to 256 bytes of data in addition
to reading the unique identifier (UID/SID). All of
the DLP-RFID-LP8C’s electronics reside on a single compact PCB, and all operational power is
taken from the host Windows/Windows CE/Linux PC via the USB interface. Up to 8 external
antennas can be connected via standard SMA connectors.
2.0 APPLICATION DEVELOPMENT
Demonstration source code written in Visual C++ is available (upon purchase) that
demonstrates the communications protocol. Using the Virtual COM Port USB drivers, the DLPRFID-LP8C appears to the host PC (Windows, Linux, Mac) as an RS232 port.
www.dlpdesign.com
sales@dlpdesign.com
© 2008 (Preliminary Data)
3.0 REGULATORY AGENCY CONSIDERATIONS
3.1 AGENCY IDENTIFICATION NUMBERS
Compliance with the appropriate regulatory agencies is essential in the deployment of all
transceiver devices. DLP Design is in the process of obtaining modular approval for this RF
product such that an OEM need only meet a few basic requirements in order to utilize their end
product under this approval. Corresponding agency identification numbers are listed below:
Part Number
US/FCC
CAN/IC
DLP-RFIDLP8C
SX90LP8C
5675A-0LP8C
3.2 EXTERNAL ANTENNAS
The DLP-RFID1 is approved for use with external antennas.
3.3 FCC/IC REQUIREMENTS FOR MODULAR APPROVAL
Any changes or modifications to the DLP-RFID-LP8C’s printed circuit board could void the
user’s authority to operate the equipment. Operation of an unapproved antenna could void the
user’s authority to operate the equipment.
3.4 WARNINGS
Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesirable operation.
To reduce potential radio interference to other users, the antenna type and its gain should be so
chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted
for successful communication.
www.dlpdesign.com
sales@dlpdesign.com
© 2008 (Preliminary Data)
This device is intended for use under the following conditions:
1. The transmitter module may not be co-located with any other transmitter or antenna.
2. The module is approved using the FCC “unlicensed modular transmitter approval” method.
As long as these two conditions are met, further transmitter testing will not be required.
However, the OEM integrator is still responsible for testing their end product for any additional
compliance measures necessitated by the installation of this module (i.e. digital device
emissions, PC peripheral requirements, etc.).
Note: In the event that these conditions cannot be met (i.e. co-location with another
transmitter), then the FCC authorization is no longer valid and the corresponding FCC ID may
not be used on the final product. Under these circumstances, the OEM integrator will be
responsible for re-evaluating the end product (including the transmitter) and obtaining a
separate FCC authorization.
3.5 OEM PRODUCT LABELING
The final end product must be labeled in a visible area with the following text:
“Contains TX FCC ID: SX90LP8C”
3.6 RF EXPOSURE
In order to comply with FCC RF exposure compliance requirements, the antenna used for this
transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
3.7 ADDITIONAL INFORMATION FOR OEM INTEGRATORS
The end user should NOT be provided with any instructions on how to remove or install the
DLP-RFID-LP8C. This device has been certified to operate with the antenna models listed
below:
DLP Design Large Loop Antenna
DLP Design Small Loop Antenna
DLP Design Ferrite Antenna
4.0 DISCLAMER
Neither the whole nor any part of the information contained herein nor the product described in
this datasheet may be adapted or reproduced in any material or electronic form without the prior
written consent of the copyright holder.
www.dlpdesign.com
sales@dlpdesign.com
© 2008 (Preliminary Data)
This product and its documentation are supplied on an as-is basis, and no warranty as to their
suitability for any particular purpose is either made or implied. DLP Design will not accept any
claim for damages whatsoever arising as a result of use or failure of this product. Your statutory
rights are not affected.
This product or any variant of it is not intended for use in any medical appliance, device, or
system in which the failure of the product might reasonably be expected to result in personal
injury.
This document provides preliminary information that may be subject to change without notice.
5.0 CONTACT INFORMATION
DLP Design, Inc.
1605 Roma Lane
Allen, TX 75013
Phone:
Fax:
Email:
Internet:
469-964-8027
415-901-4859
support@dlpdesign.com
http://www.dlpdesign.com
www.dlpdesign.com
sales@dlpdesign.com
© 2008 (Preliminary Data)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 4
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:13f8609f-3731-449f-8b0e-6a5f56db81cf
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:05:01 23:00:26-05:00
Create Date                     : 2008:05:01 23:00:26-05:00
Document ID                     : uuid:15d04350-11b9-4fa5-8d3f-1665ecf1f537
Format                          : application/pdf
Title                           : Microsoft Word - LP8C Users Manual.doc
Creator                         : janderson
Author                          : janderson

EXIF Metadata provided by EXIF.tools