DM Technology DM-AV7 Portable Mulitmedia Player User Manual AV7 ENG 1116

DM Technology Co., Ltd. Portable Mulitmedia Player AV7 ENG 1116

USERS MANUAL 3

Voice RecordOperation16OptionVOICEVOICE001 . VOCVOICE001 . VOCVOICE002 . VOCVOICE003 . VOCVOICE004 . VOC8.0KHz32Kbps785KB0:03:210:00:00REPEAT VOLUSE / TOTALIN178 / 250MB OFFVOICE RECORDŒŒAfter moving to "VOICE RECORD LIST" by using the JOG key, press theJOG key for selection. ´´Press the REC button to start recording.- While recording, the current file name and progress time are displayed at thetop of the list.-When done, press the STOP button to exit the recording.- The recorded files are displayed in the voice record list by name so that youcan select one from the list and play it.- All operations are locked while recording.Press the MENU button to move to the menu screen.The menu screen will be displayed.PlaybackMove to a file from the voice record list and press the JOG key to select it.- This plays the voice record file that you selected.- You can use the JOG key to move to another file during playback.- Press the STOP button to stop playback and switch to the file list.
17ENGRepeating PlaybackSearchŒŒMove and hold down the JOG key to the left or right to move the currentfile to the previous or next position.´´It supports up to 16X search, during which no sound emits.ˇˇEven while searching, you can play a file by pressing the JOG key.Press the REPEAT button to change modes.OFF : Automatically plays the next file when the current one is over.ONE: Plays the current file repeatedly.ALL: Plays all files in the voice record list repeatedly.Repeat SectionŒŒThis plays a selected section of the current file repeatedly.´´Press and hold down the MENU button once to select the start point (A point) of a section.ˇˇPress and hold down the MENU button again to select the end point (Bpoint). This will start playing the section (A-B).¨¨During the section repetition, press the MENU button again to deactivateit.Deletiog a FileŒŒUse the JOG key to select a file that you want to remove from the file listand press it again for more than 2 seconds.(When you want to delete all files in the list, press and hold down the REPEATbutton for more than 2 seconds)´´Press the Stop button and select OK to delete the files in the listsequentially.ˇˇYou can deselect the selected file for deletion in the same way as for fileselection.(Press and hold down the JOG key and then the REPEAT button for more than2 seconds to deselect the file)
Operation18FM RADIOAfter moving to "FM RADIO MODE" by using the JOG key, press the JOG keyfor selection.Search ModeŒŒPress the REPEAT button to enter search mode.Achannel is not displayed in search mode.´´ Move the JOG key to the left or right to increase or decrease the radiofrequency.ˇˇHold the JOG key to the left or to the right to automatically search for thenext or previous channel. (Press the JOG key to stop the operation.)¨¨Hold down the JOG key to save a channel to the PRESET LIST. (A maximum of 20 channels can be saved.)Preset ModeŒŒPress the REPEAT button to enter preset mode.Achannel is displayed in preset mode.´´AUTO MEMORY: If you hold down the REPEAT button, channels areautomatically searched for and subsequently saved in the PRESET LIST.(Press the JOG key to stop the operation.)ˇˇOperate the JOG key to select and listen to a channel.¨¨Hold down the JOG key to delete the selected channel from the PRESET LIST.FM RADIO(Option) In a weak-electrical field area where propagation is weak, some channels may notbe able to be saved.NoteOption
19ENGOperationFM RADIO & Memory SettingŒŒPress and hold down the MENU button to display a window that enablesyou to set the FM broadcasting area and the memory for recording.´´Use the JOG key to select and set an item and press the STOP button tostart broadcasting.Recording an FM ProgramŒŒPress the REC button to start recording the FM program you are currentlyhearing.´´During recording, the “REC” mark is red and the name of the currentlyrecording file and the recording time are displayed at the bottom right.- Press the STOP button to stop recording.- The recorded file is saved with the displayed name to the MP3 list. You can select and play the recorded file in MP3 mode.- All operations are locked by the REC button.You can convert MONO sound to STEREO sound by using STOP button.Note
Operation20Using a System Setup MenuHow to use a System Setup MenuŒŒSelect the item you want to set among GENERAL SETUP, RECORD SETUP,MEMORY SETUP, DISPLAY SETUP, SETUP EXIT by using the JOG key.´´Move to a detailed setup item in the selected setup menu by using the JOGkey.ˇˇAfter moving to a desired menu by using the JOG key, press the JOG keyfor selection.¨¨After moving to or adjusting a desired menu by using the JOG key, pressthe JOG key to save the state of setup.-Press the STOP button to move to the upper menu.-Press the MENU button to move to the menu screen.GENERAL SETUP✓MEMORYLANGUAGEPOWER SAVEBATTERYRESETUP GRADEGENERAL SETUP✓MEMORYLANGUAGEPOWER SAVEBATTERYRESETUP GRADE✓INTERNALEXTENDEDOption
21ENGOperation•MEMORYINTERNAL: Use when playing, recording, deleting, andformatting the contents of the built-in memory. An SD cardcannot be used.EXTENDED: Use when playing, recording, deleting, andformatting the contents of an external SD card. The built-inmemory cannot be used.Note: From the main menu, press and hold down the MENU button to setthe memory for recording.•LANGUAGEUse to select a language.•POWER SAVEUse to set the power saving function. When the function is set,power will be shut down after a certain time (five minutes)elapses in the state of stop. •BATTERYALKALINE: Select this when you want to use an alkaline battery.RECHARGE: Select this when you want to use a rechargeable battery.Note: The remaining battery capacity is displayed on the screen•RESETUse to initialize all settings (factory default).•UPGRADEUse to upgrade the firmware that has been downloaded throughUSB.GENERAL SETUP•MPEG4Use to select the picture quality of video recording.S-FINE: Highest qualityFINE: High qualityNORMAL : Normal qualityECONOMY : Lowest qualityNote: Please refer to the page 34 regarding each recording time.•MP3SAMPLE RATE/BIT RATE: Use to select the quality of recording.CHANNEL: Use to select MONO or STEREO during recording.•INPUTSets the level of the input audio.RECORD SETUPRECORD SETUP✓MPEG4MP3INPUT✓S-FINEFINENORMALECONOMYGENERAL SETUP✓MEMORYLANGUAGEPOWER SAVEBATTERYRESETUP GRADE✓INTERNALEXTENDED
Operation22Using a System Setup Menu•FORMATINTERNAL: Use to delete all the files in the built-in memory.EXTENDED: Use to delete all the files in the external SD card.MEMORY FORMAT•BRIGHTNESSUse to adjust the brightness of the LCD window.•CONTRASTUse to adjust the sharpness of the LCD window.DISPLAY SETUPThe Setup menu will disappear and the menu screen will bedisplayed.SETUP EXITSETUP EXITMEMORY FORMAT✓FORMAT ✓INTERNALEXTENDEDDISPLAY SETUP✓BRIGHTNESSCONTRASTLCD BRIGHTNESS SETUP
23ENGConnectionConnecting an External Component and USBConnecting an AV Component•Connect a Video/Audio cable between theA/V component (DVD/VCR) and the player.•Connect an USB cable between a PC (Windows ME, Windows 2000, Windows XP) andthe player.•Enter Windows Explorer after USB is recognized by the PC.•This player is displayed as a portable disc in the list of folders of Windows Explorer.•Methods of copying or deleting a file with a portable disc are same with the usingmethods in Windows.Connecting an Audio Component•Connect an Audio cable between the audiocomponent and the player.Connecting USB• When moving, copying, or deleting afile through USB, remove the USBafter making sure that the USBconnection message windowdisappears. During the connectionof USB, all the buttons on this playerdo not operate.NoteA/V component (DVD/VCR)Right side ofthe playerVideo/Audio cableAudio component(Portable CD Player,Portable Cassette Player,PC Audio output)Right side ofthe playerAudio cablePCUpper part of the playerUSB cable

Navigation menu