DO Intelligent Technology ID115UHR Smart Bracelet User Manual ID115U HR VeryFitPro

Shenzhen DO Intelligent Technology Co., Ltd. Smart Bracelet ID115U HR VeryFitPro

User Manual

Click to exercise mode, long press to start the movement 2. Device Activate & ChargeMake sure power is working normally before initial use. In case device is underlow battery, connect the device to the charger. Device will automatically boot up (please connect the USB in normal DC port (5V-500mA) for charging as below. The host should be separated from the strap when charging).3. Pair the deviceOpen pair device in the app, please make sure the Bluetooth is ON when pair the device. When searching and pairing device, please long press on the screen of the device and activate the device (light on). App will search the device automatically, choose the device name and connect the device to the app.Select the device in the smart phone searching listOnce the device connected to the app successfully, it will record and analyze your activities and sleep automatically, Touch the click toggle, the display order is as follows1. Normal ModePut the camera shoot ON in the APP, then device enter in remote shoot screen,control remote photograph shooting with following actions:( lift wrist sense / tap screen) to shoot a picture.3. Sport Mode2. Remote Camera Shoot ModeKey Definitions:Tap：function switch Long Press：activate，mode switchNote: alarm mode and find phone will only be displayed on the screen after switch ON in the APP.Time ModeStep modeActivities Record: Record daily activities, you could check daily activities including steps, distance and calorie consumption in the app;Sleep Monitoring: Device could automatically recognize your state and monitoring the whole sleep progress with analyzing the deep sleep and light sleep hours;Notification Alerts: Alarm alert, call alert, sedentary alert, etc. by silent vibration;Anti-Lost: When the smart phone is beyond the Bluetooth range (5m), the device vibrates to remind.Remote Camera Control: Operation on the screen could control remote photograph shooting.Heart Rate Monitoring:Device monitors your heart rate status and help user make suitable exercise plan.Device Data Storage:The activity data will be cleared every 0:00am as a cycle, but the device itself could restore 7 days’ data, after 7 days, the data will be cleared. We suggest user to sync data with app at least one time within 7 days during use. Can’t find device when pairing device?Please make sure the smart phone Bluetooth is ON and smart phone OS Android 4.4 & above and iOS 7.1 & above.Please make sure the device is near the smart phone when pairing (normal 0.5m) and among the normal Bluetooth communication distance range (within 10m).Please make sure the device is not under low battery. If there is still problem after full charge, please contact us. Can’t connect the device with app?Some smart phone Bluetooth service will be abnormal when reboot. Please reboot the Bluetooth or reboot smart phone for pairing device.1. Download VeryFitPro appThe smart band need to pair with the smart phone through app. Before downloading, please refer to working condition for mobile.Way to download 1: Searching the QR code, scan and download app.Please use the QR code Scan tool to scan the following QR code and open the link and download app. In case there is any problem to open the link, please try to copy the link and open it by browser.Way to download 2: Search in the phone market and download.Please search and download the “VeryFitPro” from App Store or Google play store.Activity Time ModeAlarm mode Find PhoneDistance mode Calories ModeSport start Notify mode Stopwatch modeSport Step ModeSport Clock ModeSport Distance Mode Sport Calories ModeSport stop Notify modeLong press 1S into the end of the movementNotification Mode instruction：1.Under incoming call, message notify mode, the screen will still display the last time text and sliding, when there is a new notification coming in.2. If there is a call or message come, the device will force into call/message alert mode no matter under whatever other mode, after quit, it returns to previous mode.4. Notification Mode Incoming call notify Message notifyAlarming notify Sedentary notify Anti-lost notifyCharge full notifyCharging notifySmart BraceletID115U HRHeart rate modeHeart rate modeUSB charging portTraining ModeLow-power notify13523600VeryFitPro How to Restore Factory DefaultsMake sure the device is connected with app, go in the app, enter “Mine-SystemSetting” and choose “Reboot Device”. How to update the deviceMake sure the device is connected with app, go in the app “Device”-“Device update”, please wait some minutes before update done.Model: ID115U HR CPU: Nordic Sensor: Kionix HR Sensor: Silicon Labs Host Weight: 18g Battery Type: Li-ion Polymer BatteryBattery Capacity: 45mAh Data Sync: Bluetooth 4.0Working Temperature: -10 C - 45 C Dustproof and Waterproof level: IP67Standby: more than 7 daysFrequency bands: 2402-2480MHzMaximum output power: 3.65dBmThis product is applied with professional Bluetooth RF signal and self developed algorithm, the accuracy of step pedometer could be up to 95%. Correct Disposal of this product. This marking indicates that this product should not be dispose other household wastes throughout the EU. To prevent possible harm to the environment or human he from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.CAUTIONRISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Navigation menu