DO Intelligent Technology ID115UHR Smart Bracelet User Manual ID115U HR VeryFitPro

Shenzhen DO Intelligent Technology Co., Ltd. Smart Bracelet ID115U HR VeryFitPro

User Manual

Click to exercise mode, long press to start the
movement
2. Device Activate & Charge
Make sure power is working normally before initial use. In case device is under
low battery, connect the device to the charger. Device will automatically boot
up (please connect the USB in normal DC port (5V-500mA) for charging as
below. The host should be separated from the strap when charging).
3. Pair the device
Open pair device in the app, please make sure the Bluetooth is ON when pair
the device. When searching and pairing device, please long press on the screen
of the device and activate the device (light on). App will search the device
automatically, choose the device name and connect the device to the app.
Select the device in the smart phone searching list
Once the device connected to the app successfully, it will record and analyze
your activities and sleep automatically, Touch the click toggle, the display
order is as follows
1. Normal Mode
Put the camera shoot ON in the APP, then device enter in remote shoot screen,
control remote photograph shooting with following actions:
( lift wrist sense / tap screen) to shoot a picture.
3. Sport Mode
2. Remote Camera Shoot Mode
Key Definitions:
Tapfunction switch
Long Pressactivatemode switch
Note: alarm mode and find phone will only be displayed on the screen after
switch ON in the APP.
Time Mode
Step mode
Activities Record:
Record daily activities, you could check daily activities including steps,
distance and calorie consumption in the app;
Sleep Monitoring:
Device could automatically recognize your state and monitoring the whole
sleep progress with analyzing the deep sleep and light sleep hours;
Notification Alerts:
Alarm alert, call alert, sedentary alert, etc. by silent vibration;
Anti-Lost:
When the smart phone is beyond the Bluetooth range (5m), the device
vibrates to remind.
Remote Camera Control:
Operation on the screen could control remote photograph shooting.
Heart Rate Monitoring:
Device monitors your heart rate status and help user make suitable
exercise plan.
Device Data Storage:
The activity data will be cleared every 0:00am as a cycle, but the device itself
could restore 7 days’ data, after 7 days, the data will be cleared. We suggest
user to sync data with app at least one time within 7 days during use.
Can’t find device when pairing device?
Please make sure the smart phone Bluetooth is ON and smart phone OS
Android 4.4 & above and iOS 7.1 & above.
Please make sure the device is near the smart phone when pairing (normal
0.5m) and among the normal Bluetooth communication distance range
(within 10m).
Please make sure the device is not under low battery. If there is still problem
after full charge, please contact us.
Can’t connect the device with app?
Some smart phone Bluetooth service will be abnormal when reboot. Please
reboot the Bluetooth or reboot smart phone for pairing device.
1. Download VeryFitPro app
The smart band need to pair with the smart phone through app. Before
downloading, please refer to working condition for mobile.
Way to download 1: Searching the QR code, scan and download app.
Please use the QR code Scan tool to scan the following QR code and open
the link and download app. In case there is any problem to open the link,
please try to copy the link and open it by browser.
Way to download 2: Search in the phone market and download.
Please search and download the “VeryFitPro” from App Store or
Google play store.
Activity Time Mode
Alarm mode Find Phone
Distance mode
Calories Mode
Sport start Notify mode Stopwatch mode
Sport Step Mode
Sport Clock Mode
Sport Distance Mode Sport Calories Mode
Sport stop Notify modeLong press 1S into the
end of the movement
Notification Mode instruction
1.Under incoming call, message notify mode, the screen will still display the
last time text and sliding, when there is a new notification coming in.
2. If there is a call or message come, the device will force into call/message alert
mode no matter under whatever other mode, after quit, it returns to previous mode.
4. Notification Mode
Incoming call notify Message notify
Alarming notify Sedentary notify
Anti-lost notify
Charge full notify
Charging notify
Smart Bracelet
ID115U HR
Heart rate mode
Heart rate mode
USB charging port
Training Mode
Low-power notify
13523600
VeryFitPro
How to Restore Factory Defaults
Make sure the device is connected with app, go in the app, enter
“Mine-SystemSetting” and choose “Reboot Device”.
How to update the device
Make sure the device is connected with app, go in the app “Device”-“
Device update”, please wait some minutes before update done.
Model: ID115U HR
CPU: Nordic
Sensor: Kionix
HR Sensor: Silicon Labs
Host Weight: 18g
Battery Type: Li-ion Polymer Battery
Battery Capacity: 45mAh
Data Sync: Bluetooth 4.0
Working Temperature: -10 C - 45 C
Dustproof and Waterproof level: IP67
Standby: more than 7 days
Frequency bands: 2402-2480MHz
Maximum output power: 3.65dBm
This product is applied with professional Bluetooth RF signal and self
developed algorithm, the accuracy of step pedometer could be up to 95%.
Correct Disposal of this product. This marking indicates that this
product should not be dispose other household wastes throughout
the EU. To prevent possible harm to the environment or human he from
uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please
use the return and collection systems or contact the retailer where the
product was purchased. They can take this product for environmental
safe recycling.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS

Navigation menu