DONGGUAN ELE ELECTRICAL TECH EP-10 Selfie Stick User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2506214
Application ID	RQusQtDHP/tuaIAH0HJwIw==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	304.22kB (3802713 bits)
Date Submitted	2015-01-19 00:00:00
Date Available	2015-01-19 00:00:00
Creation Date	2015-01-10 17:26:59
Producing Software	Adobe Acrobat 9.0.0
Document Lastmod	2015-01-10 17:36:38
Document Title	未标题
Document Creator	Acrobat 编辑器 9.0

D)» |.@.
FCC INFORMATION
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures :
oReorient or relocate the receiving antenna.
elncrease the separation between the equipment and receiver.
eConnect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
eConsuIt the dealer or an experienced radiofTV technician for help.
FCC WARNING:
This equipment may generate or use radio frequency energy, Changes or
modifications to this equipment may cause harmful interference unless the
modifications are expressly approved inthe instruction manual. Modifications not
authorized by the manufacturer may void users authority to operate this device.
This device complies with part 15 of the FCC rules. Operation is subject to the
bllowing two conditions.
(1 )this device may not cause harmful interference,
(2)this device must accept any interference received, including interference
that may cause undesired operation
D»
POWER SOURCE
The unit has a built-in Li-polymer rechargeable battery, recharge it before use
as below:
1.Connect the small plug from the supplied USB connection cable to the
Micro USB Port on the end of the rod.
2.Connect the other end to any Personal Computer or USB Changer having
DC 5V output.
3.During charging, the Red Charging Indicator on the end of the rod will
light. When finished charging, it will turn off.
Notes:
Your battery will last longer if you (allowing these simple guidelines for
charging and storing it.
A.For charging first time, charge it approximate 10 hours.
B.Recharge and store the device within the temperature range to {PG-
35°C (40°F-95°F).
C.Don not overcharges (longer than 24 hours). Excessive charging or
running the unit until battery goes empty will damage battery. Battery
life will be extended it you keep the battery fully charge.
D.Battery life naturally shortens slowly over time.
E.The rechargeable battery incorporated in this product is not user
replaceable.
Location of Controls:
1.Telescopic Rod
2.Cell Phone Holder
3.P|astic Adaptor for Cell Phone Holder
4.Mounting Screw
5.Mounting Nut
6.Ho|ding Knob
7.Micro USB Port (For charging only)
B.Power ON—OFF Switch
9.lndictors
10.PRESS Button 5
D»
OPERATION
BT (Blue Tooth) Pairing:
Pairing the unit to the desired BT cell phone (with camera ) as below:
1.Power on the unit by slide the Power ON — OFF Swi h to ON position. The
Blue Indicator on the end of the rod will light and blinking.
2.Power on the BT cell phone and enter to BT searching mode.
3.Start pairing as the on screen instructions on the BT cell phone. After
paired, the Blue Indicator will stop blinking. (For details pairing procedures,
please refer to the user’s manual of your BT cell phone).
Notes:
1.When the external BT cell phone searched the unit, our model number
“CMA3319" will appears on the display of external BT cell phone.
2.Pairing code “1234" or “0000” may need to enter.
Installations:
1.lnstall the Plastic Adaptor to the Holder as the figure:
f Q
2.lnstall the Cell Phone to the Holder as the figure below:
@l m» l@
OPERATION
3.lnstall the Holder to the Telescopic Rod then tighten the mouting screw as the figure
below:
4.Angle adjusts: turn the Holding Knob counterclockwise to lose it. Turn the
cell phone to the desired angle then turn the Holding Knob clockwise to lock
it as the figure below:
OPERATION
5.Adjust the length of the Telescopic Red by pull it in or out as the figure
below:
To take PhotoNideo:
1.Power on the BT cell phone and enter to BT mode.
2.Fower on the unit by slide the Power ON - OFF Switch to ON position. The
Blue Indicator on the end of rod will light. wait until the Blue Indicator
stop blinkingr (It needs take a few seconds).
3lSet the BT cell phone to picture/video capture mode.
4.Adjust the Rod angle and length as desire then iace the camera to you (or
the object) you wants to take.
5.Fress the PRESS Button Q on the rod to capture the photo (In video taking mode, press
to start to take video. Press again to stop).
6.When finished, slide the Power ON — OFF Switch to OFF position to power
off the unit.
D»
GENERAL SPECIFICATION
Power Source: Built in Li-polymer rechargeable battery; recharge by DC: 5V
through Micro USB Port
Length of Telescopic Rod: 9 — 39 inches
Maximum Load: 18 Oz
Compatible BT Cell Phone:
Android 3.0 and newer vesion
IOS 4.0 and newer vesion
Accessories:
1 x User’s Manual
1 x USB Connection Cable (For charging only)
1 x Cell Phone Holder
1 x Plastic Adaptor (for Cell Phone Holder)
SPECIFICATIONS AND ACCESOORIES ARE SUBJECT TO CHANGE WITHOUT
NOTICE

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2015:01:10 17:26:59+08:00
Creator                         : Acrobat 编辑器 9.0
Modify Date                     : 2015:01:10 17:36:38+08:00
Has XFA                         : No
Language                        : zh-cn
Tagged PDF                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Metadata Date                   : 2015:01:10 17:36:38+08:00
Creator Tool                    : Acrobat 编辑器 9.0
Format                          : application/pdf
Title                           : 未标题
Document ID                     : uuid:10012ec4-f888-4f2d-b2ba-49be6029dfde
Instance ID                     : uuid:e4cf7136-95c9-4916-ba31-92a0d3890cf4
Producer                        : Adobe Acrobat 9.0.0
Page Count                      : 6

EXIF Metadata provided by EXIF.tools