DONGGUAN FINEMOST ELECTRONICS DCR002 Bluetooth Radio Adaptor User Manual Installation manual

DONGGUAN FINEMOST ELECTRONICS CO., LTD. Bluetooth Radio Adaptor Installation manual

Contents

DCR002_Installation manual_0518

Installation manual (DCR002) 1. Mount parts on PCB Main board: top side Main board: bottom side Solder battery & audio cable to PCB on bottom side: For a module with print circuit board antenna, to eliminate the influence from other components or ground, a clearance area around the print circuit board antenna is necessary, please refer to following picture. In this area, there should be no metal in it. Besides x-y-axis, there should also be no metal at the Z-axis direction.
2. TestthePCB.3. Assembleacompleteproduct:3‐1:solderthebatteryandaudiocabletoPCBrightlyonbottomside.3‐2:InstallthePCBassemblytocabinetrightly.
Completeset
 


Navigation menu