DONGGUAN TOGRAN ELECTRONICS TECHNOLOGY TM173GDONGLE Wireless Dongle User Manual 15 TM173G Dongle UserMan
DONGGUAN TOGRAN ELECTRONICS TECHNOLOGY CO.,LTD. Wireless Dongle 15 TM173G Dongle UserMan
15_TM173G-Dongle UserMan
TM173G-QI User Manual
VER: 0.1
Page 1 of 8
PRODUCT NAME
:
Wireless Gaming Mouse
MODEL NO.
:
Mouse: TM173G-QI,
Dongle: TM173G-Dongle
VERSION
:
A0
DATE
:
2018.5.16
USER MANUAL
TM173G-QI User Manual
VER: 0.1
Page 2 of 8
Version.
#
Revised
Date
PIC
Remark
0.1
16/5/2018
Bob
Preliminary
TM173G-QI User Manual
VER: 0.1
Page 3 of 8
Electrical Specification
1. Operating Voltage
Mouse supply voltage: 3.7V 930mAh
2. Current Consumption
Current use :< 20mA
3. Sleep Mode
3.1 Electrical Current: ＜1mA;
3.2 Wake Up: Press any button
4. Mouse Pointer Performance
4.1 Resolution：600/1200/2400 (default)/3600/4800 /6000 DPI
4.2 Speed： 30inches/sec （Max）
4.3 Acceleration：20G
5. LED Indicating Functions
When the battery power is low (battery voltage reduce to <3.3V) the LED will
glisten at the frequency of 1Hz
TM173G-QI User Manual
VER: 0.1
Page 4 of 8
6. Wireless specifications
2.403-2.480GHz frequency coverage.
GFSK RF transceiver
High Speed RF link data rate Max. 1M bit/s
Button Functions
1. Left Button: Mouse left button standard function
2. Right Button: Mouse right button standard function
3. Middle Button: Mouse middle button standard function
4. Wheel: Mouse scroll wheel standard function
5. 4 Button: IE Forward function
6. 5 Button: IE Back function
7. DPI Button: DPI regulate function
TM173G-QI User Manual
VER: 0.1
Page 5 of 8
Operation Process
Step 1
Power Switch on
Step 2
Place the mouse on a desk or other plane surface. The surface material isn’t metal
is better
for wireless distance.
Step 3
Insert a Transceiver in a USB port of PC. The Transceiver TM173G-Dongle is
pairing with the mouse.
Step 4
Use the mouse freely.
TM173G-QI User Manual
VER: 0.1
Page 6 of 8
Caution
Please use the Mouse in human house only and keep away water.
Don’t to fixate the light at the mouse bottom.
Children use the mouse with guardian together is necessary.
Keep dry. Humidity, liquids, contain minerals that will corrode
electronic circuits.
Don’t use or store in dusty, dirty areas.
Don’t store in hot areas. High temperature can shorten the life of electronic
devices and warp or melt certain plastics.
Don’t store in very cold areas. Moisture can form inside the case, which may
damage electronic circuit boards.
Don’t attempt to open the case. Non-expert handling of the device may
damage the system.
Avoid dropping and strong impact.
TM173G-QI User Manual
VER: 0.1
Page 7 of 8
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
TM173G-QI User Manual
VER: 0.1
Page 8 of 8
To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the
user’s authority to operate this equipment. (Example- use only shielded
interface cables when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
Caution!
The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications could
void the user authority to operate the equipment.