DONGGUAN YUJIA INDUSTRY HF391 QUADPOD User Manual Quadpod Specificationx

Dongguan Yujia Industry Co.,Ltd QUADPOD Quadpod Specificationx

User Manual

Download: DONGGUAN YUJIA INDUSTRY HF391 QUADPOD User Manual Quadpod Specificationx
Mirror Download [FCC.gov]DONGGUAN YUJIA INDUSTRY HF391 QUADPOD User Manual Quadpod Specificationx
Document ID2140246
Application IDlbxV4FuAc82DPe8GhLJ59w==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.85kB (210635 bits)
Date Submitted2013-12-12 00:00:00
Date Available2013-12-12 00:00:00
Creation Date2013-11-22 11:47:24
Producing SoftwareAcrobat Distiller 7.0 (Windows)
Document Lastmod2013-11-22 11:48:17
Document TitleMicrosoft Word - Quadpod Specification.docx
Document CreatorPScript5.dll Version 5.2.2
Document Author: Maikou.Zhang

HF‐391 Instruction manual
Introduction:
●Playing :50% volumce ≥6 hours
1.switch the “power on /off ”, connect the 3.5mm line-in cable to your
audio source and the other port to the speaker “IN”。
●Bluetooth version : Bluetooth 4.0
2.start playing music. ()
Please read below before your using.
charging
●APTX audio processing
to charge , connect the USB cable directly to a laptop or mains USB to
your speaker ,the Micro USB connected into the“CHARGE” hole. The
LED will turn red whilst charging
Headphone connected
it is able to connect with the headphone too when connect
the 3.5 line-in
cable
to your headphone and the other port into the “OUT” hole
See from Blow drawing
① LINE IN
②
CHARGE
③Warning LED ④Power ON/OFF
charging/LINE IN / LINE OUT
⑤ Headset OUT ⑥ “-”quickly press : volumce decrease/long pres
s :last song
⑦ “+”quickly press : play、stop、answer calls、hang
up/long press : start to pair agian
e/long press : next song
⑧quickly press: volumce increas
⑨MIC
Operation:
Charging
LINE IN
1.switch the “Power on/off”button on,you can hear the warning sound
s“hello”which means in pairing mode.
2. 1.Active your pnone’s Bluetoon function and the enter Bluetooth de
Headset OUT
vice’s searching mode, find out “Quadpod”device and start pairing.
3.successfully connected.,you can hear the warning sounds “Your d
Technical details:
evice is connected”,and now you can play music/talk on phone/telec
●Power supplier:DC5V---1A
onference.
●Output power:10W(1khz,THD3%)
4.when the power of battery is less than 10%, you will hear another
●Frequency: 120HZ---15000HZ
sounds “Battery low”, and please charge it in time.
●Speaker:OD40mm (4 OHM 3W*2)+OD32mm(4OHM3W*2)
5. switch off the “Power on/ off” button, you will find the device is
●effective distance:≦10m
turned off and said “Goodbye”.
LINE In manual:
●Li-ion:3.7V 40 mm X 30 mm X 16mm(1000mA)
●full charing:3 hours
●S/N:≥65dB
FCC NOTE:
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE
TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID AND
CHANGE ANNTENA WHICH THE MANUFACTURER PROVIDES.
IT IS THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a resi dential installation.
This equipment generates, uses and can radiate radio frequenc y energy and, if not
installed and used in accordance with the in structions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular insta llation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to corr ect the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experien ced radio/TV technician for help.
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your
body.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2013:11:22 11:47:24+08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2013:11:22 11:48:17+08:00
Metadata Date                   : 2013:11:22 11:48:17+08:00
Format                          : application/pdf
Creator                         : Maikou.Zhang
Title                           : Microsoft Word - Quadpod Specification.docx
Document ID                     : uuid:4e3706b3-e9de-48bd-a977-3cd84c54d1e5
Instance ID                     : uuid:31abd985-9bd4-4874-9a2b-91efbb950974
Has XFA                         : No
Page Count                      : 2
Author                          : Maikou.Zhang
EXIF Metadata provided by EXIF.tools
FCC ID Filing: ODAHF391

Navigation menu