DREAMUS EB07 ELECTRIC BOOK User Manual 00

IRIVER LIMITED ELECTRIC BOOK 00

Users Manual

USER GUIDE3nd IRIVER STORY HDSTORY HD
Chapter 01 Getting StartedChapter 02 Learning the basic featuresComponentsName of each partScreen configurations347Power on/offUsing the hold and reset functionsSelecting a menuChargingConnecting 1314151617Chapter 03 Viewing booksBooks24Chapter 04 Set upSettings39Chapter 05 Other informationiriver plus 4Adobe Digital EditionsCopyrightsCertification/Registered trademarkExemption Important safety informationTroubleshooting4243445657 5861Table of Contents...
Getting started | 3ComponentsUSB cableComponents may be changed without prior notice for improvement of product performance or quality.Quick guide &Product warrantyPlayer
Getting started | 4Name of each part The exterior and the contents printed or engraved may differ by model or according to the names of each part.Exterior/interior of product123789EPDHOME keyBACK keySD card slotUSB terminalpower switch456Move keyEnter keyOption key143256 987
Hardware SpecificationsPet Name Story HDModel Code EB07Version Basic / WiFiCPU Freescale iMX-508 (Cortex-A8 / 800MHz)Display Type EPD (LG Display - 6.0" / LB060X01)Display Resolution XGA (1024 x 768)Color Depth 16 Gray Level (Monochrome)Key StructurePower SlideHome / Back / Enter / Option Key (4 Key)Navi Key (4 Key)QWERTY Keyboard (38 Key)Capacity 2GB onlyStorage Type movi NAND 2GBExternal Storage SD(SDHC/32G)Memory 1Gbit (Mobile DDR SDRAM : 200MHz)Connection Type mini USB 2.0Power Charge USB Charging (DC 5V)Battery Li-Polymer (1800mA/h)Operational Temperature 0~40 'CNetwork (WiFi Model) Wi-Fi (WLAN 802.11b/g)송수신 주파수 2412 ~ 2472 MHz 출력 10 mW채널수 13전파형식 G1DD2D발진방식 PLLH/WProject
2 3 54 6 7 8 91123456Clear keyShift keySYM(symbol) keyZoom keyRotation keySpace / Favourite Key789Back (Exit) keyMove keyEnter keyGetting started | 6Name of each part Character input keys
Power on/offLearning the basic features | 13Power on1. Slide the [Hold/power switch] to the right and the power comes on.Power off1. When the product is on, slide the [Hold/power switch] to the right and the power goes off.
Learning the basic features | 14When using the reset function, the current time, and data that is in the memory, will not be deleted. Do not use the reset function while the product is in action. It may cause serious harm to the memory.Using the reset functionsUsing the reset function1. If the program pauses and the keys do not operate, open the cover at the bottom of the product and press the [RESET HOLE] with a pointed tool.2. Slide the [Hold/power switch] to the right and the power will turn on.
Learning the basic features | 16ChargingCharging by connecting with a computer1. Open the cover at the bottom of the product.2. Turn the computer on and connect with the product using a USB cable.3. The internal battery is automatically charged.While recharging,the Recharging LED will flicker on and off. Once recharging is completed, the Recharging LED will remain on. (If power is turned on while recharging is in progress, the Booting LED will come on, but once booting is completed, the Recharging LED will flicker on and off again.) Do not use cables other than the USB cable provided. It may cause malfunction. Ensure that the device is connected to a high-power USB 2.0 port. If connected to a low-power USB port (e.g. some keyboards or USB hubs without a power supply of their own) the device may not fully recharge.If the computer is in sleep mode, the product may not be charged.If the device is being charged whilst on, charging may take longer.Room temperature enables best operating conditions.The rechargable battery is a consumable, so the amount of time it can be used gradually decreases.It takes approximately 5 hours to charge when completely discharged and when the power is off. If you use the product while charging, it may take more time to charge.If the battery is completely discharged and has not been used for a long time, power will not come on again until it has been charged for at least ten minutes.In case where you recharge the batteries using the adapter, we do not provide warranties for adaptors other than those sold by iriver.
ConnectingLearning the basic features | 18Inserting/removing the SD card1. Turn the power off, place the SD card (see the figure below) in the SD card slot, and press it in gently.2. Press it in once more and the card can be removed.Recommended SD cardsBrand: SanDisk, TranscendInsert/remove the SD card while the power is off.Do not force the SD card. It may cause malfunction and damage to the SD card. Do not detach the SD card when in use. It may delete data, cause malfunction, or damage the SD card.If the SD card is not positioned properly, the product may malfunction or the card may get stuck. If SD cards other than the recommended ones are used, it may cause malfunction.The transfer rate of the SD card may differ according to the PC status.SD cards cannot be formatted using the product. Use a card reader to format.When formatting an SD card, all the data are deleted, so back up the data before formatting. When formatting an SD card, we recommend that you use the FAT 32 system.If an SD card is not recognized or malfunctions, try to use it again after formatting.SD cards must be purchased separately. This product recommends that you use an SD card up to 32GB.
ConnectingLearning the basic features | 19Connecting with the computer1. Open the cover at the bottom of the product.2. Turn the product and the computer on, and connect the product to the computer using a USB cable.3. A connection mode selection window appears on the screen. - Connect with removable disk: The product and computer have been connected for data transmission. - Battery charging: The product will now be charged.Do not use cables other than the USB cable provided. It may cause malfunction.For troublefree connection with the computer, connect when all the functions are stopped.Connect to a high-power USB 2.0 port. If connected to a keyboard or a USB hub without a power supply of its own, connection with the computer may not be troublefree.The product will be automatically powered on when connecting with the computer.
Other information | 56Certification/Registered trademarkKCC / FCC / PCT /Grade B device (home broadcasting and communication device): This device, mainly for domestic use (grade B), is EMC certified, and can be used in all areas.CertificationWindows 2000, Windows XP, Windows Vista, and Windows Media Player are registered trademarks of Microsoft Corporation.iriver E-book contains Adobe® Reader® Mobile software under license from Adobe Systems Incorporated, Copyright © 1995-2010 Adobe Systems Incorporated. All rights reserved. Adobe and Reader are trademarks of Adobe Systems Incorporated.Registered trademark1177
Other information | 57Exemption ExemptionThe technical limits in the manufacturing process may cause EPD Panel to have approx. 0.0012% bright or dark pixels. However, it dose not affect the capability of the product.CE warning! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.EN Test Regulation VersionETSI EN 300 328 V1.7.1ETSI EN 301 489-1 V1.8.1 ETSI EN 301 489-17 V2.1.1EN 60950-1:2006+A11:2009The manufacturer, importer, and agencies will not be held liable for damage caused by accidents including injuries or inappropriate use or handling of the product. The information in the manual is based on the current specifications of the product.iriver Ltd., the manufacturer of this product, continues to add new features and apply new technologies to it.All standards may be changed without prior notice to individual users.We cannot be held responsible for data loss caused by the use of the product.

Navigation menu