DTC Communications PDTX5000 COFDM Transmitter User Manual 3
DTC Communications Inc. COFDM Transmitter 3
Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 578418 |
| Application ID | J5PJpx49rsPpdA6agnnAMw== |
| Document Description | Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 156.1kB (1951225 bits) |
| Date Submitted | 2005-09-06 00:00:00 |
| Date Available | 2005-08-25 00:00:00 |
| Creation Date | 2005-08-03 18:20:03 |
| Producing Software | Acrobat Distiller 5.0.5 (Windows) |
| Document Lastmod | 2005-08-03 14:21:47 |
| Document Title | Untitled-3 |
| Document Creator | PageMaker 7.0 |
| Document Author: | Charles Warrington |
COFDM Transmitter Module Model Pd-TX-1000 1 Watt Output DTC COMMUNICATIONS, INCORPORATED how to contact DTC copyright notice warranty For operator and troubleshooting information, customers are encouraged to refer to the details in this manual. For additional clarification or instruction, or to order parts, contact DTC. Copyright © 2005 DTC warrants its manufactured components against defects in material and workmanship for a period of two (2) years, commencing on the date of original purchase. Customer Service is available Monday through Friday between the hours of 9:00 AM and 5:00 PM EST at: Tel: 603-880-4411 Fax: 603-880-6965 Website: www.dtccom.com Email: info@dtccom.com 486 Amherst Street Nashua, New Hampshire 03063 DTC Communications, Inc. All rights reserved. No part of this document may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, including but not limited to electronic, magnetic, mechanical, optical, chemical, manual or otherwise, without the prior written permission of DTC Communications, Inc. disclaimer The information in the document is subject to change without notice. DTC makes no representations or warranties with respect to the contents hereof, and specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. DTC reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation of DTC to notify any person of such revision or changes. trademarks Products manufactured by others that are approved for use with DTC equipment are warranted for the manufacturer’s warranty period, commencing from the date of shipment from DTC. FCC information The following information is provided as a service to our law enforcement customers who require a Part 90 station license for video surveillance operations using the 2450 to 2483.5 MHz band. You will need to provide two documents: • Form 600 (the application form) • Form 159 (the filing fee form) Forms can be obtained from the FCC on their website at: www.fcc.gov Trademarks of DTC Communications, Inc. include: You can also contact the FCC using their FAX back service at: (888) 418-3676 • DTC • MiniPIX® Additional instructions are available by telephone at: (888) 225-5322 • DynaPIX® The filing fee form is returned to: Other product names used in this manual are the properties of their respective owners. Federal Communications Commission 1270 Fairfield Road Gettysburg, PA 17325-7245 DTC COMMUNICATIONS, INC. PN OP1920304 REV 1 TABLE OF CONTENTS manual conventions NOTE: Describes special issues you should be aware of while using a particular function. WARNING: Calls out situations in which equipment could be damaged or a process could be incorrectly implemented, but in which operator safety is not a factor. TIP: Describes application hints. Quick Start ............................................................................ 4-5 Complete These Steps ................................................................ 4 Thermal Issues ........................................................................... 4 Introduction ............................................................................... 6 Operation ............................................................................... 7 Using your Palladium Transmitter ................................................ 7 Changing your Transmitter Configuration .................................... 7 Components ........................................................................... 8-9 Programming ...................................................................... 10-15 System PC Controller Application Software .............................. 10 Getting Started .......................................................................... 10 Transmitter Control Application ................................................. 11 Specifications ..................................................................... 16-17 Warranty ............................................................................. 18 Contact Us ............................................................................. 19 DTC COMMUNICATIONS, INC. QUICK START Complete these steps: 1 Connect the transmitter antenna to the SMA connector on the Palladium unit (see photo left). 2 Attach a 12 VDC power source (such as a battery pack or AC power adapter) to the power block as shown below. The input voltage range is from 10 to 18 VDC. NOTE: Device is polarity sensitive. Connect DC power only as shown below; black to black (-), red to red (+). 3 Attach your camera video input (75 ohm composite video source in PAL or NTSC) to the video RCA connector (see photo below). 4 Apply the necessary power to your camera and turn ON. Palladium Transmitter Heat Sink Thermal Issues Programming Connector DTC COMMUNICATIONS, INC. Palladium TX-1000 Modules feature a heat sink for proper heat dissipation. For optimal performance, do not block air flow over the fins of this heat sink. QUICK START 5 When power is applied, the green RF LED turns ON. The channel number LED also turns ON, representing the most recent channel setting from the last time the transmitter was used. Push the RF button to transmit. 6 If you need to change the operating channel, press the CONFIG button to cycle through the 8 available channels indicated by the channel number LEDs. Refer to the Programming section on page 10 for more information on channel settings. When you change the channel configuration, the RF transmission is automatically switched OFF to prevent accidental interference. When you have selected the channel you need, push the RF button for one second to start transmitting again. The RF LED will turn ON. Palladium TX-1000 Transmitter Controls NOTE: A red ALARM LED indicates that no video is connected. Your Transmitter is now operational. Confirm its signal with your Palladium Receiver. NOTE: Eight Channel LEDs are located on the control panel. If all 8 green LEDs are flashing, this indicates that your battery source is low. DTC COMMUNICATIONS, INC. INTRODUCTION The Palladium Series of digital video transmitters provide exceptional video quality in high multipath environments. They are ideal for use inside buildings, in urban areas, and in other applications where multipath would normally cause video tearing or breakup. Palladium TX-1000 1 Watt Digital Transmitter All Palladium Series transmitters are designed for spectrum-efficient 2.5 MHz channel spacing. Approximately 400 carriers are used to transmit video and two channels of voice and data. Palladium transmitters may be located on adjacent channels without a guard band. AES 128-bit encryption ensures users of secure communications. The Palladium 1000 is a small, modular transmitter with a 1W RF power output. It’s ideal for OEM concealments and short to mid-range robotic and UAV applications. The package is only 13” x 9” x 2.5”. Power consumption is 6 Watts. All connections are conveniently located. This device can be powered with disposable batteries. The Palladium 1000 incorporates a power amplifier bringing total power output to 1W. NOTE: Use only Lithium batteries with this device. DTC COMMUNICATIONS, INC. OPERATION Using your Palladium Transmitter Follow the instructions given in the Quick Start section on pages 4-5. When power is first applied to the Palladium, the unit reverts to the last used channel and RF is turned ON. One of the green channel LEDs will turn ON indicating the active channel. The Alarm LED may be ON, which indicates that there is no active video input. Changing your Transmitter Configuration Palladium TX-1000 Transmitter Control Panel The Palladium Transmitter can store up to 8 different configurations, which can be selected on the front panel. Each of these configurations can be programmed into the Transmitter with the supplied DTC Programming Software and a Windows PC. Refer to the Programming section on page 10 for more information. To cycle through your preconfigured channels press the CONFIG button once to advance to the next setting. By default, the Palladium will turn OFF the transmitted signal while you are changing channels. This is to prevent accidental interference. Push the RF button after channel selection to resume RF transmission of your video image. To place your Palladium Transmitter in (low current consumption) standby mode, hold the RF button for one second. The RF LED turns OFF indicating the TX is now in standby mode. Push RF again to resume transmitting. DTC COMMUNICATIONS, INC. COMPONENTS Transmitter Control Panel Channel LEDs These green LEDs, numbered 1 through 8, indicate the channel number currently selected. Each channel represents a set of preconfigured settings. ALARM LED This red LED indicates a valid video signal is not present. RF LED This green LED indicates that the RF output is ON. RF Button This membrane switch toggles ON/OFF the RF output. CONFIG Button This membrane switch cycles through the eight channels. DTC COMMUNICATIONS, INC. COMPONENTS Programming Connector (DB-9) See Page 10. Video Input Connector 75 Ohm Composite Video Signal DC Power Input 10-18 VDC Transmitter Antenna Connector (SMA) This connector attaches to the transmitter antenna and carries the RF output signal. Always ensure the transmitter antenna is attached before operating the Palladium Transmitter. FCC ID Label This label identifies the frequencies programmed into the Palladium Transmitter. Control Panel See Page 8. DTC COMMUNICATIONS, INC. PROGRAMMING System PC Controller Application Software Advanced control of the system is available by using PC control applications. Typically users may want to customize the default configurations to control settings such as frequency, scrambling keys, modulation parameters, and video resolution. The transmitter is controlled by the application DTC_tx_ctrl.exe available on the CD delivered with the product. A PC is required with two RS232 Serial COM ports to control both a transmitter and receiver simultaneously. Where changes are to be made to either a transmitter, or a receiver, at different times, a PC with a single RS232 Serial COM part can be used. Installation of the two control programs is as simple as copying them from the CD to a suitable location on the PC. No install shield routine is launched. Note that the controllers generate their own log and initialization files, so it is best to create a dedicated directory for these applications, perhaps with links to the applications from the desktop of the PC. Getting Started 10 DTC COMMUNICATIONS, INC. •Use the supplied cables to connect the chosen COM port(s) of the PC to unit(s) to be configured. •Launch each application in turn by double clicking or using the run command. •Connection with a transmitter should be automatic, but the user can force selection of the correct COM port using the drop down, followed by the Connect button. •Errors may appear during the connection process if the PC is unable to automatically ascertain which unit is connected to which COM port. PROGRAMMING Transmitter Control Application Output Frequency (MHz) The transmit frequency can be changed by entering the new desired frequency in this field. Values outside the range supported by a particular transmitter type will be rounded to the highest or lowest supported frequency as appropriate. The resolution of the transmit frequency is complex and resolved to the closest achievable within the constants of the supported step sizes of 1MHz, 1.6667 MHz and 2.5 MHz. Modulation Output This control is used to turn on and off the RF output. After a configuration change, the output always reverts to OFF. It must be ON for operation. Modulation FEC The default FEC is 2/3, however improved range operation can be achieved by selecting FEC 1/3. FEC 1/3 will improve signal range by 3dB. However FEC 1/3 reduces link capacity to 1.2Mb/s therefore reducing picture quality. FEC Link Bitrate Sensitivity 2/3 2.4Mb/s: -99dBm, 1/3 1.2Mb/s: -102dBm Modulation Guard Interval The Guard Interval is fixed at 1/16 in current software releases. Modulation Bandwidth For the Palladium transmitter products, the modulation bandwidth is fixed at 2.5MHz. COFDM Mode The COFDM mode can be changed between QPSK and 16QAM. QPSK is the default mode and will give the strongest most rugged RF link performance. Selecting 16QAM reduces the link performance by 5dB but improves the link data throughput, giving significantly better video quality. DTC COMMUNICATIONS, INC. 11 PROGRAMMING Output Attenuation This control can be used to make minor adjustments to the output power level, but in normal operation should not be changed from factory settings. Video Input This control is used to select the composite video input standard. Options are PAL, and NTSC both with and without 7.5 IRE pedestal. Video Bitrate This control can be used to set the video bitrate within the constraints of capacity available in the channel, but only when Chaining Input is set to ON. Chaining CANNOT be enabled on normal transmitters, and as such video bit rate control is automatic. The video bit rate is automatically maximized in each configuration when Chaining Input is turned off. Horizontal resolution The video coding resolution can be selected from 704, 528, 480 and 352 pixels. Changing the horizontal resolution to lower values will make the coded picture softer. Care should be taken to match the horizontal resolution to the resolution of the camera connected to the transmitter; this will give best image results. Audio Encoder The Audio can be turned on and off with this control. Audio is OFF by default, but there are several audio modes that vary from very high quality to speech grade that can be selected with this control. Enabling audio will degrade the video quality, because some of the available data capacity is diverted away from video to audio. Selecting high fidelity audio modes will degrade the video quality more than lower fidelity audio modes. 12 DTC COMMUNICATIONS, INC. PROGRAMMING Audio Input Level This control is used to define the audio gain to be applied to the audio input signal. 0dB is used for line level audio and various options up to 48dB of gain can be applied for microphone inputs. Unit Name Can be user defined. Type in name. Sleep Mode This control allows the unit to be forced into a Sleep Mode where main functions are disabled, and the power consumption is significantly reduced. Data Future use. Data Baud Rate Future use. Chaining Input Future use. Chain Number Future use. DTC COMMUNICATIONS, INC. 13 PROGRAMMING Current Config This field reports the last loaded configuration number. Note that for the Palladium transmitter, changes applied after the configuration has been loaded are saved immediately into the current configuration. Scrambling Scrambling must be enabled at the transmitter by selecting AES in the scrambling field. At this point the user will need to ensure that the correct key is in use and this is done by using Options/Write AES key. The key is 128 bits and is entered as 32 ASCII hexadecimal characters (0-9 and A-F). Video Locked (Status Only) This status information indicates whether the transmitter is successfully locked to the incoming composite video signal. Unlocked status may indicate cabling faults, or poor quality incoming video feeds to the unit. Software Version (Status Only) This status information describes the version of the software running the transmitter product. FPGA Version (Status Only) Engineering use only. Serial Number (Status Only) This status information is the electronic serial number of the transmitter PCB. This number can be used for upgrades or support. Chaining (Status Only) Future use. 14 DTC COMMUNICATIONS, INC. PROGRAMMING Options Timeouts – password protected access to change timeouts used during the serial communications between the unit and the controller. Engineering – password protected access to further diagnostic and calibration features. Write License Code – open a further password protected box for entering license codes for future use. Change RS232 address – prompts the user to change the units RS-232 address, which can be useful when connecting multiple units together via a multi drop RS-485 bus for control purposes. Write AES Key – opens a dialogue box for entering a 128bit AES scrambling key, as 32 ASCII hexadecimal characters (0…F) Restore Defaults – restores factory default settings in the transmitter. Polling Enabled – selecting this option makes the control application automatically refresh the data presented to the user every few seconds. File Load Config – used for loading configuration data to text file. Save Config - used for saving configuration data to text file. Change Logfile – opens a standard Windows file save dialog box which allows the user to change the path and name of the log file generated by the application. Exit – exits the control application. DTC COMMUNICATIONS, INC. 15 SPECIFICATIONS Physical Unit Dimensions Pd-TX-1000 Environmental Operational Temp with Heatsink Ambient Temp with Heatsink 16 DTC COMMUNICATIONS, INC. 14 x 9 x 3.5 in (356 mm x 229 mm x 89 mm) -10 degrees C to 70 degrees C -10 degrees C to 40 degrees C Power Input Voltage Power Consumption Pd-TX-1000 Fully Operational ~ 2 W, Sleep Mode < 0.5 W Control PC Control Interface Memory RS-232. Ten user-programmable configurations Video Encoding Compression Standard Chrominance Profile Line Standard Horizontal Resolution Vertical Resolution Video Bitrates System Latency MPEG-2 with non-DVB modes 4:2:0 PAL 625 or NTSC 525 704, 528, 480, 352 pixels (528 as standard) 576 (625 lines) or 480 (525 lines) 1Mbps to 10 Mbps End to end delay of 43 milliseconds 10 to 18 VDC SPECIFICATIONS Audio Encoding Input 1 Bitrates 7 Sampling Frequency THD Response Crosstalk S/N Stereo or Dual Mono pair 28 kbps to 72 kbps depending on configuration 32 kHz, 16 kHz or 8kHz < 0.1% max 20Hz to 6KHz, +/- 0.25dB > 55 dB min 60 dB RMS Composite Video Input Standards Specification Connector Composite PAL and NTSC decoding NTSC (with and without pedestal) or PAL Rec. ITU-R BT.470-4 Hirose Eight-bit comb filtering composite decoder Analog Audio Analog Audio Input Nominal Level +10 dBu +4 dBu Data Baud Rate Connector Up to 115 kbaud LEMO Scrambling Scrambling type COFDM RF output Output Frequency Occupied Bandwidth Power Connector COFDM Standard Fixed key scrambling system Algorithms offered include AES. Band Dependent 2.5 MHz 100 mW or 250 mW SMA Proprietary, 2.5 MHz channel spacing, OFDM bandwidth of 2.44 MHz with 400 carriers. DTC COMMUNICATIONS, INC. 17 TWO YEAR WARRANTY DTC Communications, Inc. (DTC) warrants its RF transmitting and receiving products to be free from defects in workmanship or material for a period of two (2) years from the date of shipment unless otherwise stated. The liability of DTC, Inc. under this warranty is limited to replacing, repairing, or issuing credit, at option, for any products, which are returned by the purchaser during such warranty period, provided: DTC is notified and a Repair Authorization Number is issued by DTC Customer Service within 30 days after discovery of such defects by Customer. The defective units are returned to DTC with transportation charged Prepaid by the Customer. Product damaged in shipment must be reported to and claim forms filed with the Carrier by the Customer. In shipments to the factory, notice and claim procedures will be initiated by DTC. DTC’s examination of such products shall disclose to its satisfaction that such defects exist and have not been caused by misuse, misapplication, neglect, improper installation, improper storage, alteration, physical damage or accidents. The warranty shall not apply to microphones, batteries, antennas, crystals or material ordinarily susceptible to field damage or any accessories of a disposable nature. The warranty shall not apply to Engineering Prototypes or Customer requested modifications to electronic circuits. This warranty does not apply to and DTC does not independently warrant items or systems sold by DTC which are produced by other manufacturers. With respect to such items, the Customer shall look to the warranty of the original manufacturer and DTC disclaims all warranty, expressed or implied. Nothing in this warranty, or any statement, brochure, bulletin, or advertisement is to be interpreted as establishing the suitability of any product for particular application or use. Applications of the product and the determination of suitability for any application, is the sole responsibility of the Customer. 18 DTC COMMUNICATIONS, INC. Sales Representatives Nashua Main Office Numbers voice (603) 880-4411 toll free (800) 233-8639 fax (603) 880-6965 Director of Federal Sales John Morgan (Nashua Main Office Numbers) direct voice (603) 546-2122 cell (603) 320-3257 jmorgan@dtccom.com Federal Sales Manager Marianne Caiazza (Nashua Main Office Numbers) direct voice (603) 546-2121 cell (603) 320-3256 mcaiazza@dtccom.com Federal Sales Manager Walter Patenaude (Nashua Main Office Numbers) direct voice (603) 546-2161 cell (413) 454-3651 wpatenaude@dtccom.com REGIONAL SALES MANAGERS Howard Rich toll free (888) 819-8570 voice (860) 626-8570 fax (860) 626-8571 NY, MA, CT, RI, PA, NJ, MD, DE, WV, DC hrich@dtccom.com Floyd Flowers voice (208) 667-5197 fax (208) 676-8107 WA, OR, ID, MT, ND, WY, UT, SD CONTACT US Director State & Local Agencies & International Sales Michael Demos (Nashua Main Office Numbers) direct voice (603) 546-2120 cell (603) 320-3255 mdemos@dtccom.com OEM Sales Manager Steve Chisholm (Nashua Main Office Numbers) direct voice (603) 546-2124 schisholm@dtccom.com State/Local Inside Sales Karen Korza (Nashua Main Office Numbers) direct voice (603) 546-2169 kkorza@dtccom.com Joe Parkinson toll free (800) 952-4914 voice (909) 598-5110 fax (909) 598-3120 CA, AZ, NV, HI, AK jparkinson@dtccom.com Ed Bryant voice (903) 725-7229 fax (903) 725-7863 ME, NH, VT,TX, OK, AR, LA, NM, KS, CO ebryant@dtccom.com Federal/International/OEM Inside Sales Christine Guzman (Nashua Main Office Numbers) direct voice (603) 546-2217 cguzman@dtccom.com Surveillance Platforms IST toll free (888) 478-6599 voice (954) 755-0724 cell (954) 755-0817 teamist@aol.com Canada Dyplex Communications Ltd. Gary Sayer voice (416) 675-2002 fax (416) 675-1822 info@dyplex.com Gary Nichols toll free (866) 794-2823 voice (765) 473-8917 fax (765) 473-8920 MN, WI, MI, IA, MO, IL, IN, OH, KY, NE gnichols@dtccom.com Frank Prioli toll free (800) 246-2610 voice (727) 392-4761 fax (727) 320-0509 FL, GA, AL, MS, TN, NC, SC, VA fprioli@dtccom.com DTC COMMUNICATIONS, INC. 19 486 Amherst Street • Nashua, New Hampshire 03063 • 603-880- 4411 www.dtccom.com
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2005:08:03 18:20:03Z Modify Date : 2005:08:03 14:21:47-04:00 Page Count : 20 Creation Date : 2005:08:03 18:20:03Z Mod Date : 2005:08:03 14:21:47-04:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : Charles Warrington Metadata Date : 2005:08:03 14:21:47-04:00 Creator : Charles Warrington Title : Untitled-3EXIF Metadata provided by EXIF.tools