DURABRAND DVD Systems Manual L0803280

User Manual: DURABRAND DURABRAND DVD Systems Manual DURABRAND DVD Systems Owner's Manual, DURABRAND DVD Systems installation guides

Open the PDF directly: View PDF .
Page Count: 30

Download
Open PDF In Browser	View PDF

MODEL

PDV-709

PORTABLE DVD PLAYER
INSTRUCTION

MANUAL

•

Plays DVDs, Audio CDs, CD-R/RW,

•

Includes

Rechargeable

•

Includes

AC Adaptor

•

Includes

Car Adaptor

•

Connects

MP3 CDs and Picture CDs

Battery for Portable

Use Anywhere

for Travel

to Your Larger Screen

PLEASE READ CAREFULLY

Home TV (cable included)

BEFORE

USE
IB-PDV709-WM-E-061006

WARNING
TO PREVENT
RECEPTACLE

FIRE OR SHOCK HAZARD,
DO NOT USE THE PLUG WITH AN EXTENSION
CORD,
OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT

BLADE
EXPOSURE.
TO REDUCE
THE RISK OF
THIS APPLIANCE
TO RAIN OR MOISTURE.
TO
BLADE

]

PLUG

TO WIDE

SLOT,

FULLY

FIRE OR
PREVENT

ELECTRIC
SHOCK,
DO
ELECTRICAL
SHOCK,

NOT EXPOSE
MATCH WIDE

INSERT.

CAUTION

The
lightning
flash
with
arrowhead
symbol,
within
an
equilateral
triangle,
is intended
to alert the user to the presence
of uninsuIated
"dangerous
voltage"
within
the product's
enclosure
that
may
be of
sufficient
magnitude
to
constitute
a risk of electric
shock to persons.
Rating

plate

and

caution

marking

WARNING:

REDUCE

THE

RISK OF ELECTRIC
SHOCK,
DO NOT REMOVE COVER (OR
BACK).
NO
USER
SERVICEABLE
PARTS INSIDE.
REFER
SERVICING
TO
QUALIFIED
SERVICE
PERSONNEL.

are

marked

on the bottom

The exclamation
an equilateral
intended
to alert

point within
triangle
is
the user to

the presence
of important
operating
and maintenance
(servicing)
instructions
in the
literature
accompanying
the
appliance.

enclosure

of the

apparatus.

IMPORTANT SAFETY INSTRUCTIONS
1. Read

these

instructions.

2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5.
6.
7.
8.

Do not use this apparatus
near water.
Clean only with dry cloth.
Do not block any ventilation
openings,
install in accordance
with the manufacturer's
instructions.
Do not install near any heat sources such as radiators,
heat registers,
stoves, or other apparatus
(including
amplifiers)
that produce
heat.
9. Do not defeat the safety purpose
of the polarized
or grounding-type
plug. A polarized
plug has
two blades with one wider than the other. A grounding
type plug has two blades
and a third
grounding
prong. The wide blade or the third prong are provided
for your safety. If the provided
plug does not fit into your outlet, consult
an electrician
for replacement
of the obsolete
outlet.
lO.Protect
the power cord from
being walked
on or pinched
particularly
at plugs, convenience
receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories
specified
by the manufacturer.
1 2. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution
when moving the
cart/apparatus
combination
to avoid injury from tip-over.
13.Unplug
this apparatus
during lightning
storms
or when unused
for long periods
of time.
14. Refer all servicing
to qualified
service personneI.
Servicing
is required
when the apparatus
has
been damaged
in any way, such as power-supply
cord or plug is damaged,
liquid has been spiited
or objects have fallen into the apparatus,
the apparatus
has been exposed
to rain or moisture,
does not operate
normally
or has been dropped.
15. This appliance
shaN not be exposed
to dripping
or splashing
water and that no object filled with
liquid such as vases shall be placed on the apparatus.

IB-PDV709-WM-E-061006

Do not apply

oil or petroleum

products

or solvents

to any part of this

set.

FCC NOTE
]-his device complies
with Part 15 of the FCC Rules. Operation
is subject to the following
twc
conditions:
(1) This device may not cause harmful interference,
and (2) This device must accept
any interference
received,
including
interference
that may cause undesirable
operation.
WARNING:
Changes
or modifications
compliance
could void the

to this unit not expressly
user's
authority
to operate

approved
by the
the equipment.

party

responsible

for

NOTE:
This

equipment

has been

tested

and found

to comply

with the limits

for a Class

B digital

device,

pursuant
to Part 15 of the FCC rules. These limits are designed
to provide reasonable
protection
against harmfuI interference
in a residential
installation.
This equipment
generates,
uses and can
radiate radio frequency
energy and, if not installed and used in accordance
with the instructions,
may cause harmful
interference
to radio communications.
However,
there is no guarantee
that
interference
will not occur in a particular
installation.
If this equipment does cause harmful interference
to radio or television
reception,
which can be determined
by turning the equipment
off and on, the
user is encouraged
to try to correct the interference
by one or more of the following
measures.
- Reorient

or relocate

- increase

the separation

- Connect
this
connected.
- Consult

the receiving

equipment

the dealer

between
into

antenna.
the

equipment

an outtet

or an experienced

and receiver.

a circuit

radio/TV

different

technician

from

that

to which

the

receiver

for help.

rNOTE
This product
incorporates
copyright
protection
technology
that is protected
by method
claims
of U.S. patent
numbers
4,631,603;
4,819,098;
4,907,093;
5,315,448;
and 6,516,132
and
other intellectual
property
rights owned
by Macrovision
Corporation
and other rights owners.
Use of this copyright
protection
technology
must be authorized
by Macrovision
Corporation,
and is intended
for home and other limited viewing
uses only, unless otherwise
authorized
by
Macrevision
Corporation.
Reverse
engineering
or disassembly
is prohibited.

INCLUDED ACCESSORIES

CAUTION

The

Use of controls
or adjustments
or
performance
of procedures
other than
those
specified
herein
may result
in
hazardous
radiation
exposure.
Do not
open covers and do not repair yourself.
Refer servicing
to qualified
personnel.
This DVD VIDEO player is classified
as
CLASS
1 LASER
PRODUCT
as stated
on the bottom
of the set.

following

items

are

included

with

your

DVD player:
- Remote
Control
- AAA Batteries
- Rechargeable
-

AC adaptor
Car adaptor
Audio/Video
cable
User's Guide

- Product

--2

(2)
battery

Registration

Card

IB-PDV709-WM-E-061006

• Getting Started:
1

Safety Instructions
Controls Overview

Power Supply

Remote Control Operation
Notes on Discs

8
9

• Basic Operation:
1. Playing a Disc .....................................................................................

Using the Search Functions

3. Selecting Audio Mode ...........................................................................
4.

Changing Subtitle Language ..................................................................

5. Displaying Disc Information

11
11
12

6. Repeat Play

7. Slow-Motion Play

8. Zoom Play

9. Search for Preferred Play .......................................................................

10. Viewing Angle Shots-

11. Programmed

Play

12. MP3 Disc Operation ..............................................................................

13. JPEG or Picture Disc Operation.

• Connection
System Connections

Watching a DVD on Your TV

• Initial Setting:
System Setup (TV System, LCD Mode, TV Type & Default)
Setting the TV System

.20

Setting the LCD Mode ............................................................................

Selecting the TV Type .............................................................................

Default - Resetting the Functions to Factory Defaults

Language Setup (OSD, Audio, Subtitle & Menu)

Audio Setup

-22

Video Setup

.22
22

Speaker Setup
• Precautions ................................................................................................

• Trouble Shooting

.24

• Glossary

• Specifications

.28
3

IB-PDV709-WM-E-061006

Front View

12
13
14
15
16
_17
_18
19

9 1011

1. TFT LCD SCREEN - Provides a high resolution picture.
2. DISC DOOR - Open the door by pressing the open button
3. SPEAKERS
- Provide stereo sound.
4. ON/STANDBY
INDICATOR
- The indicator
mode and in green when the set is on.
5. SKIP/SEARCH
BACKWARD
144 - Press
Press and hold to scan backwards.
6. SKIP/SEARCH
FORWARD
and hold to scan forwards.

lights

and set the disc inside

up in red when

to skip to the previous

it.

the set is in standby
title,

- Press to skip to the next title, chapter

chapter

or track.

Press

7. VOLUME BUTTONS - Press to adjust the volume (up is +, down is -).
8. STOP BUTTON • - Stops playback, press twice for full stop.
9.
10.
11.
12.

PLAY/PAUSE
BUTTON _ll - Press to start or pause play.
REMOTE SENSOR - Receives signals from the remote control.
OPEN BUTTON - Press to open the disc door.
SCREEN OFF BUTTON -When
you fold down the LCD screen, the LCD panel wilt push
this button and turn off the LCD screen but keeps the set working for viewing DVDs on
your TV. This is useful when the AUDIO/VIDEO
cable is connected.
13. TITLE BUTTON - Press to display the title menu (only if it is present on the disc).
14. MENU BUTTON - Press to display
15. SETUP BUTTON - Press to display
16. GOTO BUTTON - Press to display
select the desired disc starting time,
17. OK BUTTON - Press to confirm a
18.
19.
20.
21.

the disc's menu (only if your disc has a menu).
the DVD player's setup menu.
the GOTO menu then press the direction buttons
track or title for playback.
selection.

DIRECTION
BUTTONS - Used to select options and DVD menus and MP3 tracks.
SUBTITLE
BUTTON - Press to select or change the subtitles (if available on your disc).
AUDIO BUTTON - Press to select the audio channel (or director's cut channel).
DISPLAY BUTTON - Press to view the disc information and times.
4

IB-PDV709-WM-E-061006

Right Side View

1. PHONES
others.
2, COAXIAL
cable

JACK - Insert your headphones
JACK - Connects

(coaxial

OUT JACKS

the supplied
5. S-VIDEO

(not included) to enjoy the sound without disturbing

the DVD player to your home theater

system

using a coaxial

cable is not included).

3. VIDEO OUT JACK - Connects
video cable.
4. AUDIO

- Connect

the DVD player to your large screen TV using the supplied
the DVD player to your TV or home theater

system

using

audio cables.

JACK

- Connects

the DVD player to your TV using an S-Video

cable

(S-Video

cable is not included).
6. POWER ON/OFF SWITCH - Slide to switch the DVD player ON or OFF.
7. DC IN JACK - For connecting to the supplied AC adaptor or car adaptor.

Recharqeable Battery

1. RECHARGEABLE

BATTERY

- For DC power supply.

2. BATTERY

TAB - Push to remove

3. BATTERY

LED INDICATOR

when

battery

the battery.

- Will flash

when

battery

is charging

and remain

steadily

is fuiiy charged.

IB-PDV709-WM-E-061006

1. ON/STANDBY

REMOTE CONTROL

button

- Press to turn the set

ON or STANDBY.

2. SCREEN

ON/OFF

button

- To turn the LCD

screen ON or OFF (for external

TV use only),

press and hold this button. To adjust the color or
1

brightness level of the LCD screen, press this
button to display the LCD screen color or

2_
3
4_
5

m13

6
7

brightness function, then press the Ieft or right
direction button to adjust the level.

3. MENU button - Press to display the disc's menu
(only if your disc has a menu).
4. TITLE button - Displays the title menu (only if
it is present on the disc).

8
--15
m16
_17
_18
19

10-11--

5. 144/_
button - Press to skip to previous
title, chapter or track / press and hotd more than
1 second to scan backward.
6. _,.).l/_,€'-button

- Press

to skip to next

title,

chapter or track / press and hold more than 1
second to scan forward.
7. DIRECTION buttons - Used in DVD menus &
audio MP3 track selection.
8. OK button
- Press to start/pause
play or
confirm a selection or command.
9. NUMERIC
buttons
- Used in DVD menus
& audio

CD/MP3

track selection.

10.

ANGLE / PROGRAM button - In DVD mode, press to display angle menu (if present on the
DVD disc); Press to program your favorite track in CD/MP3 mode.

11.

VOLUME
volume).

12.
13.

SETUP button - Press to display the DVD player's setup menu.
DISPLAY
button
- Press this button
to view the elapsed
time,
information and the track numbers during play.

14.
15.
16.

STOP button - Stops play, press twice to full stop.
SUBTITLE button - Press to setup the subtitle (if available on your disc).
AUDIO button - Press to select the desired audio channels.

17.

GOTO button

18.

REPEAT button - Press this button to repeat
section (A to B), or all of the disc.

19.

ZOOM/SLOW button - Press to zoom (enlarged) the playing picture in DVD mode or hold
more than 1 second to view slow motion playback.

20.

REMOTE CONTROL lens - Sends
keep this clean for best operation.

NOTE:

buttons

- Press to adjust

the volume

level (remember

to also adjust

title

your TV's

or chapter

- Allows you to select the desired disc starting time, track or title for playback.

the signal

The remote control witt only work when
switch on the right side of the set.

the current

to the

track, chapter,

set. Do not block

power is on. Please

title, a chosen

or cover

this,

turn on power with the

IB-PDV709-WM-E-061006

You can power this portable DVD player by connecting
rechargeabte
battery (all included).

A. Using

the AC adaptor,

the car adaptor

or the

the AC adaptor

This player is supplied with an AC adaptor for powering the
unit and charging the battery.
Insert the AC adaptor plug to the DC IN jack on the portable
DVD player and connect the adaptor to a wall outlet.

B. Using the car adaptor

(12V)

This player is supplied with a 12V car adaptor for powering
the unit and recharging the battery while in a vehicle that
has a 12V power system.
Insert the car adaptor plug to the DC IN jack on the
portable DVD player and connect the car adaptor
to the vehicle's 12V accessory / cigarette lighter
socket, the car adaptor indicator will light up.

_...............................

CAUTION:
1. The included car adaptor is for use with this unit only. Do not use it with other equipment.
2. Use this unit only with the included car adaptor, using with other car adaptors could damage
the unit and the unit may not work.
3. Do not operate this unit or view video movies while driving a vehicle.
4. If some lines appear on the screen during the startup of the vehicle, please turn the unit off
and turn it on again after the vehicle is running.
5. Place the unit in a proper position for viewing.
6. When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may
become hot or not work due to poor contact. Be sure to clean the cigarette lighter socket before use.
7. Disconnect the car adaptor from both the unit and the cigarette lighter socket when the
battery is fully charged and the unit is not in use.

C. Using the rechargeable

battery

The rechargeabte
battery pack is suitable
unique functions of this unit outdoors.
Remember to charge the battery fully before
initial use (about 5 hours),

Attaching the Battery

for portable

(refer to the diagram

1. Make sure the player is off and the AC adaptor
disconnected.

use which

allows

you to enjoy

the

slot
on the right)
or car adaptor

2. Place the DVD player on a soft and smooth surface with the bottom
of the unit facing up.
3. With one hand on the DVD player to prevent it from moving, take the
battery and align the plastic tabs on the battery with slots on the
player, and slide it forward to lock, The battery will click into place.

Detaching the Battery

(refer to the diagram on the right)
1. Make sure the player is off and the AC adaptor or car
adaptor is disconnected.
2. Push the tab on the battery down.
3. Slide and lift the battery out.

To charge the battery

,9
@

tab

1. Insert the AC adaptor's plug into the DC IN jack on the DVD player and connect the AC
adaptor to a wail outlet. After 5 seconds, the battery LED indicator wil! turn on and start to flash.
7
IB-PDV709-WM-E-061006

2.Thebattery
LEDindicator
wittflashwhenthebattery
ischarging
andremain
steadily
on
whenthebattery
isfullycharged.
3.Charging
timeisabout
5hours.
Afullycharged
battery
delivers
about
2.5hours
ofviewing
time.
4.Tocharge
thebattery
usingthesupplied
caradaptor,
followpointBontheprevious
page.
NOTE:
When
inserting
thebattery
while
thesetisACpowered
orcarpowered,
therewillbea
delayofseveral
seconds
before
theLEDlights
up.Thisisbecause
thebattery
charging
circuit
needs
toresetanddetect
thebattery
status.
Working conditions
•
•
•
•
•
•
•
•

and precautions for the rechargeable

battery

New batteries should be fully charged before initial use (about 5 hours).
Battery should be changed by an adult for safety.
Battery should only be used and charged when temperatures
are between 32 -100°F.
Never put the battery in fire or water.
Do not expose the battery to high temperatures
or store in hot, sunny places.
Do not short the battery terminals.
Do not open the battery.
When the battery is weak, the ON/STANDBY
indicator wilI flash and the Low Power icon
+'[_"
will appear on the LCD screen and then the power automatically
turns off. If this
occurs, please use the AC adaptor to recharge the battery or play the set on AC power.

1. Push the tab to open the battery cover.
2. Insert

2 size

"AAA"

alkaline

batteries

(included) into the battery compartment
according
to the + and - markings
inside the battery
compartment,
then
replace the battery cover.

NOTE:
•

Point the remote control unit from less than 20 feet (6 m) from the remote
about 60°of the front of the unit.

•
•

Batteries should be changed by an adult for safety.
Reversing polarities will damage the batteries and possibly your remote. Be sure to follow
polarities ( + and -) as indicated.
Do not mix different types of batteries together (Alkaline, Carbon-Zinc,
Nickel-Cadmium
etc.), or old batteries with new ones.
When the batteries have become discharged,they
must be disposed of in a safe manner that
complies with all applicable laws.
When the batteries becomes weak, the operating distance of the remote control decreases
and you witt need to replace the batteries.
When the remote control is not to be used for a long time (2 months or more), remove the
batteries to avoid possible damage that may be caused by battery leakage.
Avoid keeping the remote control in extremely hot or humid locations.
Do not point bright lights at the remote control sensor (like laser pointers).
Do not place objects between the remote control unit and the remote controI sensor.
Do not use this remote control while using the remote control unit of any other equipment at
the same time, the signals may mix.
8
IB-PDV709-WM-E-061006

•
•
•
•
•
•
•
•

sensor and within

Discs that can be played

DVD Video
(Region 1)

Video+Audio
VIDEO

DVD-R / DVD-RW

Video+Audio
VIDEO

JPEG disc

".JPG"

or "JPEG"

Music CD

Video onty (Photos)
or Audio / Video

Audio only
I3IGITAL AUDIO

CD-R disc

[_o_

or Audio
Audio /only
Video

CD-RW disc

_[_o_

Audio /onty
or Audio
Video

MP3 disc

NOTE:

M P-3

Audio only

A hand symbol " _ " may appear on the screen when pressing some buttons. A " _._ "
means that the operation is not permitted by the DVD player for the disc in that mode
or at that time. Sometimes, the set needs to be in stop mode or other modes for that
button to work.

Discs that cannot be played
CD-Is, CD-ROMs (including computer software discs and game discs), data part of CD-Extras,
DVD-ROMs, DVD Audio discs, DIVX, MPEG 4 DVD discs, HD layer on SACDs or discs recorded
in another format such as SECAM, and regions other than your region. This set wil! also not play
damaged, scratched or dirty discs.

IB-PDV709-WM-E-061006

1
2

Lift the LCD screen.
Slide the DVD player's
appear

POWER switch to the ON position, the DVD logo (start-up picture) will

on the screen.

Press

the OPEN

button

on the DVD player to open the disc

door. Place a disc gently on the tray with the label side up, make
sure the disc is seated on the spindle by pressing down in the center,
then close the door by pushing it down. The DVD player starts to
read the disc's table of contents (this may take a few seconds).

/
/

NOTE

1: Load the disc with the label side facing up, when
playing a double-sided
disc, load it with the desired
playing side face down.

NOTE

2: "NO DISC" will show in the display if the disc is upside
down or the disc is badly scratched or dirty, it will not
play. Please clean it or change the disc before use.
Also you can buy a disc polisher to try to repair the
scratched disc.

Some discs will start playing automatically,
the screen.
selection

and others will display the Disc Contents

If the menu is shown, use the ("9, I_, A & V) direction

and press the OK button to confirm,

Press the VOLUME

Press the SCREEN ON/OFF button on the remote control, then press the left 41 and right I_
direction

buttons

To stop playback,

- button to adjust

you may press play.

+ or VOLUME

otherwise

Menu on

buttons to highlight your

to adjust the brightness

the volume

level.

and the color of the LCD screen

if needed.

press the STOP button.

8 To pause the playback,

press the OK button I_ll on the remote control or the PLAY/PAUSE

button on the player. To resume playback, press the OK button ),'mon the remote control
or the PLAY/PAUSE button on the player again.
NOTE

1 : During play, pressing the STOP button once will show "PRE STOP _i"
in the
display, if you press the STOP button the second time, the display will show
"STOP

and now your system

is in the full STOP mode.

NOTE 2: Leaving the set in the stop mode for a longer time wilt drain the battery the same
as during normal play, remember to shut off the power after use.

9 To skip

to another track/chapter,

repeatedly

during

press the SKIP/SEARCH

To access the disc menu or title menu during
on the remote control or on the DVD player.

Remember to shut off the player by sliding
the movie finishes playing.

NOTE:

or SKIP/SEARCH

button

playback.
DVD play, press the MENU or TITLE button

the POWER

This player has a screen saver which will display

switch to the OFF position

a bouncing

when

DVD logo if no video

played for a while.

IB-PDV709-WM-E-061006

During
play,youcansearch
quickly
through
a chapter
ortrack.
Search through a chapter or a track
1

During
speed,

play, press and hold the SKIP/SEARCH
_
the fast search speed changes as follows:

FORWARD X2 _
---_

FORWARD

X4 _

to search

FORWARD X8 _

forward

at a faster

FORWARD

X20

PLAY _.

During play, press and hold the SKIP/SEARCH
speed, the search speed changes as follows:
BACKWARD
X20 _

NOTE:

button

X2 _41 ---_

BACKWARD

X4 _

|4F_I button to search backward

---_

BACKWARD

X8 _

---_

at a faster

BACKWARD

---)-- PLAY _-

In any fast forward or fast backward mode, press the OK button on the remote control
or press the PLAY/PAUSE button on the player to return to normal play mode immediately.

If a DVD disc contains a Multi-Audio
soundtrack
feature, you can select the desired audio
language by pressing the AUDIO button on the set or on the remote control repeatedly during
play, playback status will be displayed
on the screen. The AUDIO button can also select
director's cuts dialogue and other disc dialogue.
NOTE 1: If you press the AUDIO button for several times, but the desired
selected, it means a second language is not available on the disc.

language

is not

NOTE 2: This DVD player does not support DTS decoding. For discs with DTS decoding,
please press the AUDIO button to select another audio output mode, such as
AC-3 or until you hear the sound.

(DVD ONLY)
You can select a desired
the remote control.
NOTE:

subtitle quickly

and easily with the SUBTITLE

button on the set or on

This operation works only with DVD discs on which multiple subtitle languages
recorded. Some DVDs have no subtitles, some may have 5 or more. If no subtitles
recorded on your DVD, pressing this button wiIi not change the subtitles.

To remove the subtitles

display,

press the SUBTITLE

button

again until " _

are
are

: [OFF] " shows.

IB-PDV709-WM-E-061006

If youwanttoknowdiscinformation
duringplay,presstheDISPLAY
button
ontheremote
control
orontheset,thediscinformation
wiitappear
onthetopofthescreen
asshown
below:
For DVD Play
I DVD

1/2

o)) 1/3ENG

DVD TT

Drl

6/12 (_

5.1CH

1/2 CH

00:02:35

2/3ENG

6/12

The
about time
the title/chapter
and information
chapter elapsed
is shown.

OFF

number

The ANGLE
and
information
is shown.
about the AUDIO, SUBTITLE

C-00:06:41

he information
time is shown.

about the chapter

remaining

The information
shown.

about the title elapsed time is

/DVD

1/2 OH

6/12

T00:18:05

1/2 OH

6/12

7-01:05:40

J ,==._ The information
is shown.

[DVD

OFF

about the title remaining

display

time

The information

goes off.

The information
about
elapsed
time is shown.

the

current

track

J _

The information
about
remaining time is shown.

the

current

track

For CD Play
CD TRK

2/12 ,4e

CD TRK

2/12

,4e-"

I CD TRK

2/12 '4e

CD TRK

2/12 ,4e

00:01:03

€2_ C-00:02:42

T 00:10:49

T-00:40:35

OFF

he information
time
is shown.

about the total track elapsed

The information
time
is shown.

about the total track remaining

The information

display goes off.

For MP3 Play
I MP3

MP3

TRK 2/124,4e

<_ 00:03:03

he information
about
elapsed time is shown.

the

current

track

TRK2/1244e

C-00:01:36

] .=,_

The information
about
remaining time is shown.

the

current

track

OFF
NOTE

The information

1 : "TT" stands for title, "CH" stands for chapter,

NOTE 2: Depending on the disc, the above information
may not be able tochange the display.
12

display

goes off.

and "TRK" stands for track.
may not appear on your screen or you

IB-PDV709-WM-E-061006

TheREPEAT
button
allows
youtorepeat
thecurrent
track,
chapter,
title,achosen
section
(A-B),
or
alIofthedisc.
EachtimeyoupresstheREPEAT
button
ontheremote
control
repeatedly,
therepeat
mode
changes
asfollows:
For DVD
REP:

REP:

WILL
CHAPTER

[CHAPTER]

REPEAT
OVER

REP:

THIS
AND

WILL

OVER

TITLE

[REP

ALL]

REP:

[TITLE]

REPEAT
OVER

THIS

AND

WILL

OVER

DISC

REPEAT
OVER

THIS

AND

NORMAL

PLAY

OVER

REPEAT
A B CANCEL

"A B CANCEL"
NORMAL

SHOWS

PLAY

REPEAT

A B

AND
REPEAT

RESUMES

A TO B SEGMENT

OVER

AND

OVER.

NOTE: When you select "A TO B" repeat play:
1. Press the REPEAT button until "REPEAT A- " appears at the beginning of the segment
(point A) you want to play repeatedly.
2. Press REPEAT button again at the end of the segment (point B), "REPEAT A-B" wilt
appear on the display.
3. The DVD player wilI automatically
play the selected segments A to B over and over till
you press REPEAT button again.

For CD
REP: [REP 1] _
A-B CANCEL

REP: [REP ALL] _

REP: [OFF] _

REPEAT A- _

REPEAT A-B

For MR3
REP: [REP 1] _
REP: [REP DIR] _
REPEAT A-B _
A-B CANCEL

REP: [REP ALL] _

REP: [OFF]

REPEAT A -

(JUST FOR DVD)
A disc can also be played

SF 1/2 _

in slow-motion

by pressing

Each time you press and hold the ZOOM/SLOW
playback speed will change as follows:
SF 1/3 _

Press the OK button
mode.

SF 1/4 _

SF 1/5 ._-

on the remote

NOTE

1 : Sound will be silent during

NOTE

2: SF stands

for SLOW

control

the ZOOM/SLOW

button.

button on the remote control during play, the
SF 1/6 ._J,,- SF 1/7 ._-

to resume

normal

PLAY _,-

play from any stow-motion

slow motion play.

FORWARD.

IB-PDV709-WM-E-061006

(FOR DVD)
The ZOOM/SLOW
zoom point.

button

allows

you to do a minimal

Press the ZOOM/SLOW button on the remote control repeatedly
The display wilI show as follows:
ZOOM 2 _

ZOOM 3 _

ZOOM 4 _

ZOOM 1/2 _

Press the direction

To return to normal ptay from the ZOOM
the icon shows "ZOOM: OFF".

NOTE

ZOOM1/3 _

ZOOM1/4 _

sizes,

To select a scene with the title, the chapter,
the track number or the time during play use
the GOTO button.

Press the GOTO button during play, the
screen wilI show as on the right:

Move the

LEFT and

RIGHT

the black area around

button repeatedly

some zoom functions

the picture wilI enlarge,

this

Press GOTO for DVD

DVD

TT 01/02

CH 002/013

t
title you want
to jump to

00:02:03

chapter you want
to jump to

time you want
to jump to

Press GOTO for CD
CD TRK 02/12 _

00:03:11

The player will jump to ptay the section
you selected
and the menu display
disappears
from the screen.

track you want
to jump to

NOTE:
The search function
the opening screens
as the FBI warnings

till

for searching by title, chapter & time

direction

buttons ( "_ & I_ ) and press the number
buttons on the remote control or UP and
DOWN direction
buttons (A & V) to
select the title, the track, or the time,
then press the OK button to confirm.

ZOOM: OFF

picture up, down, left or right.

mode, press the ZOOM/SLOW

1: Some discs may not respond to the zoom feature and during
the picture edges may seem fuzzy, this is normal.
to smaller

as wel! as shift the

to enlarge or reduce a picture.

buttons (A, V, "_ & _1_)to move the enlarged

NOTE 2: When reducing
is normal.

zoom into a picture

input the second
you want to jump to

may not work during
of many DVDs, such
etc.

Press GOTO for MP3

I MP3 TRK 0016/154t ,11_ _
track you want
to jump to

_
00_1:2fl
input the minute

you want to jump to |
input the second
you want to jump to

IB-PDV709-WM-E-061006

(DVD ONLY)
Some DVD video discs may contain
different

angles.

This icon _

Certain scenes can be viewed
button on the remote control.

NOTE:

1. The recorded

scenes which

have been shot simultaneously

witI be on the DVD case if it contains
from many different

angles differ depending

angles by pressing

shots.

the PROGRAM/ANGLE

on the disc used.

2. Onty some DVD discs have this feature
3. If this feature is not available
when the PROGRAM/ANGLE

from a few

these multi-angle

(very few).

on your DVD, a hand "_"
button is pressed.

wil! show in the top left corner

You can make a program of up to 16 tracks in the order you want them to be played. This feature
can be used on CD and MP3.

Press the PROGRAM/ANGLE
menu:

button on the remote control, the screen wilI display the program

PROG

Use the number buttons

PLAY

CLEAR

and the direction

the disc into the numbered positions.
the songs to be played in.

After programming,

buttons to enter the track numbers of the songs on

The positions

press the direction

buttons

represent

the order in which you would Iike

to select PLAY, then press OK button on the

remote control, the player wil! start to play the disc in the programmed
4

To skip to the next (programmed)

To stop programmed

playback,

track, press the SKIP/SEARCH

order you selected.
button.

press STOP button twice, or open the disc door.

IB-PDV709-WM-E-061006

Thisallows
youtoplayyourMP3audiorecorded
discyoumade
onthisset.Thissetwittnot
playWMA
format
songs.
Whenrecording
yourMP3disconyourcomputer,
please
record
the
songs
inMP3format.
1

Load your recorded

Select the desired folder by pressing the UP or DOWN button.

MP3 disc into the player, a menu wil! show on the screen.

Press the OK button

Select

Press the OK button to start playback.

You may use the SKIP/SEARCH

Press and hold the SKIP/SEARCH

Press STOP button to stop playing.

the desired

to open the folder.

track by pressing

You can play your JPEG or picture

1
2

the UP or DOWN button.

or _
_

button to skip to the previous or next track.

or _

for fast backward

or fast forward play.

disc on this set.

Load a JPEG disc or picture CD disc into the player, a menu wilI show on the screen.
Go to the menu of directory which you want to view
the OK button to start the JPEG play.

by using the direction

During the picture show, use the (A / •
the picture left or right.

Press the PROGRAM/ANGLE
directions, the picture display
any of the corners.

Press the ZOOM/SLOW button on the remote repeatedly
display wi!I show as follows:
ZOOM 2 _

ZOOM 3 _

To move the enlarged
buttons.

/ •

/ 4) direction

ZOOM 4 _

ZOOM 1/2 _

Press the SKIP/SEARCH
Each picture
presentation.

in the

current

invert, or mirror

button
directory

to enlarge or reduce a picture.

ZOOM1/3 _

press any of the (A

To return to normal view, press the ZOOM/SLOW

to rotate,

press

button on the remote control to change the picture display
will start from the top, or the bottom or the left or the right or

picture in any direction,

buttons

buttons,

ZOOM1/4 _
/ •

/ •

The

ZOOM: OFF
/ _1) direction

button till "ZOOM: OFF" shows on the screen.

to see the next image in your folder.
will

be displayed

consecutively

in a slide

show

IB-PDV709-WM-E-061006

For TV Connection
This DVD player can also be used to view movies on your large screen TV. When viewing
your TV, you may fold the screen down to shut off the TFT LCD display.

Always ensure when connecting cables, the DVD player, TV and any other electrical equipment
are turned off and not plugged into the AC outlet.
Ensure that you observe the color coding when connecting audio and video cables.

1. Connecting

the DVD player to your TV

Using the attached
A/V cables
Connect one end of the audio/video cable plugs to the audio/video
and other end to the audio/video
in jacks on your TV by following
and plugs (refer to diagram A).
Diagram

Please follow the
cable ptug colors.

S-Video

out jacks on the DVD player
the color codes on the jacks

connection

]
_

(S-VIDEO

cable

YOUR
I

is not included)

S-Video will provide sharper images than normal video.
Insert the audio plugs (white and red) into the audio out jacks on your DVD player and the audio in
jacks on your TV by following the color of the plugs and jacks (refer to diagram B).
Connect the DVD player's S-VIDEO jack and your TV's S-VIDEO jack by using an S-VIDEO
cable (not included).
Diagram

YOUR

IB-PDV709-WM-E-061006

For TV Connection

Connecting

to a digital

home

theater

system

using

a coaxial

cable

Refer to your home theater system's manual before connection.
For Video, insert the video plugs into the video out jack on your DVD player and the video in
jack on your TV.
For Audio, connect the DVD player's COAXIAL jack and your home theater system's COAXIAL
jack by a coaxial cable (not included).

YOUR TV
YOUR HOME
THEATER SYSTEM
OR AMPLIFIER

NOTE:

Coaxial

connection

2. Connecting

will provide

to your

a higher

quality

headphones

sound effect.

(headphones

are not included)

Turn down the volume of the DVD player and connect the headphones (optional, not included)
to the DVD player's PHONES jack, when headphones
are connected,
the speakers of your
DVD player will automatically
turn off. Adjust the volume to your taste (but not too loud).

IB-PDV709-WM-E-061006

After al! the connections

have been done, please follow steps below to watch a DVD on your TV.

1
2

Make sure all of the equipment

Slide the DVD player's
appear on the screen.

Turn on your TV and set it to DVD mode (please see box below), the DVD logo will appear on
your TV's screen.

Press the OPEN button on the DVD player to open the disc door. Place a disc gently on the
tray with the label side up, make sure the disc is seated on the spindle by pressing down in
the center, close the door by pushing it down. The DVD player starts to read the disc's table
of contents (this may take a few seconds).

Some discs will start playing automatically, and others will display the Disc Contents Menu on
the screen. If the menu is presented, use the (_1, I_, A & V) direction buttons to highlight your
selection and press OK button to confirm.

Press the VOLUME + or VOLUME - button on the DVD's remote control
remote control to adjust the volume level.

Fold down the LCD screen cover, the DVD player will continue
be dark.

To stop playback,

is plugged

back into the AC outlet.

Lift the DVD LCD screen.
POWER switch to the ON position, the DVD logo (start-up picture) will

and on your TV's

to work, but the screen will

press the STOP button.

To pause the playback, press the OK button _-II on the remote control.
press the OK button I_m again.

To resume playback,

NOTE 1 : During play, press the STOP button once, the display wilt show " PRE STOP _
".
If you press the STOP button the second time, the display wil! show " STOP • "
and now your system is in the full STOP mode.
NOTE 2: Leaving the set in the stop mode for a longer time wilt drain the battery the same
as during normal play, remember to shut off the power after use.

To skip to another
during playback.

To access the disc menu or title menu during DVD play, press the MENU or TITLE button
on the remote control.

13
14

If you want to use other

track/chapter,

press the SKIP/SEARCH

DVD play functions,

Remember to shut off the player by sliding
the movie finishes playing.

please

or _

button

repeatedly

see pages 11-16.

the POWER

switch to the OFF position

when

How to Find your TV's Video Input Channel
Make sure you have made all the connections
(see page 17), you may need to change
your TV's video input mode to see the DVD player's menu and movies, also double check
that both TV and player are plugged into the AC outlet.
1. Set your TV to the correct video input. For example, if you connect this player to the
VIDEO 1 input on your TV, switch your TV to video 1.
2. Switch your TV to the correct video input channel. The video input channel varies with
different TV brands and models, many TV remote controls have a TV/VlDEO
button
which can be used to change to different
video inputs and back to TV for normal
broadcast viewing, on some older TVs, you may need to press channet 3 or 4 on your
TV's remote. Once you selected the correct channel, your TV will show the opening
DVD screen. For more details, please see your TV's manual.
19

IB-PDV709-WM-E-061006

For TV or Portable Use
When using the DVD player for the first time, you may need to set some of the settings
adjustments according to your TV and favorite preferences.
You can get to the SETUP
1

Press

the SETUP

appear

button,

by following

a SETUP

the below

steps.

wilI

on the TV screen.

use the A / • / • / _1 direction buttons on the
DVD player or on the remote control to highlight
your selection.

Press the OK button to confirm your selection.

When the setup
has been done,
press
SETUP button to exit the SETUP mode.

SYSTEM

and

SETUP

(TV SYSTEM,

Setting the TV SYSTEM

the

LCD MODE,

TV TYPE

& DEFAULT)

(only when you ere using your TV to watch the picture).

- NTSC
A USA video standard.
select this mode.

If your TV is NTSC system,

- AUTO
If the connected
TV is multi-system,
select this
mode. The output format will be in accordance
with the video signal of the disc.

Setting

the LCD

This allows
screen.

MODE

you to set the aspect

ratio of the

LCD

4:3

16:9

-20

IB-PDV709-WM-E-061006

Selecting the TV TYPE
Select the aspect ratio of the movie to match the
LCD screen and your TV set. There are three types
of screen sizes you may select.
NOTE:

If your DISC is not encoded to allow you to
change
the aspect ratio, the TV display
cannot be changed.

4 X 3 Standard (4:3 PS PAN and SCAN) - Choose this setting if
you want to see the movie fill the entire screen of your TV. This
might mean that parts of the picture (the left and right edges)
won't be seen.
Most discs produced
in this fashion.

in a WIDESCREEN

format

can't be cropped

4x3 Standard
4 X 3 Letterbox (4:3 LB LETTER BOX) - Choose this setting if
you want to see movies in their original aspect ratio (width-toheight ratio). You'll see the entire frame of the movie, but it will
take up a smaller portion of the screen vertically. The movie wilt
appear with black bars at the top and bottom of the screen, but you
will see everything to the left & right of the center as in a movie
theater.
4X3 Le_erbox

16 X 9 Widesereen

16X9 Widescreen

(16:9)

- Choose

this

setting

if your

DVD

Player is connected to a WIDESCREEN
TV. If you choose this
setting and you don't have a widescreen
TV, the images on the
screen may appear distorted due to vertical compression
(faces
may seem long and thin).
If you play a disc recorded in 4 X 3 format on a widescreen TV, the
left and right side of the screen will appear black. Press SETUP
button to change to 4:3 ratio or match the type of TV you have.
NOTE: For 16:9 Widesereen
TV TYPE, you need to adjust both
the LCD mode and the TV TYPE to 16:9 (see page 20 for Setting
the LCD MODE).

Default

- Resetting

the functions

to factory

defaults

In case you fiddled around with your set's controls
and you cannot return the set to its normal operation;
you can reset the major options on this set.

NOTE:

If you set "DEFAULT", all items in the setup
menu will be reset to default setting.

-21

IB-PDV709-WM-E-061006

LANGUAGE

SETUP (On Screen Display, AUDIO, SUBTITLE & MENU)

These items allow you to preset the OSD language (OSD
= On Screen Display), audio language, subtitle language,
and menu language that will always be used for every
disc on this player (if the language selected is available).
NOTE 1: If the language selected is not available on
the disc, the original language designated
by each disc will be selected.
NOTE 2: You can change the AUDIO or SUBTITLE
language easily by pressing the AUDIO or
SUBTITLE
button (refer to page 11).

AUDIO SETUP (DIGITAL

OUT) - Only for COAXIALconnectionmode

Your DVD player can be connected to a home theater system with a coaxial digitat audio jack for high
quality sound. Digital audio output allows you to select SPDIF/RAW or SPDIF/PCM digital signal.
A. SPDIF/RAW
The coaxiaI output is connected
to a receiver that
accepts Dolby Digital or other signals. It works for
most of the coaxiaI connections.
B. SPDIF/PCM
The coaxial output is connected
accepts PCM SIGNALS.

to a receiver

that

VIDEO SETUP
These
settings
allow you to set the video
Brightness,
Contrast,
Hue, and Saturation.
BRIGHTNESS
- The brightness
(how light the picture is).
CONTRAST
- The contrast
dark portions of pictures).

of the video

HUE - The hue of the video signal

signaI
signal

signal

(the

(the color of the

pictures).
SATURATION
- The saturation
of the video
(the vividness of the color).
All above can be adjusted to your tastes.

signaI

SPEAKER SETUP (DOWNMIX)
Whether you use the DVD player standalone, connect
to a TV or a home theater with the supplied A/V cables,
you can select the audio output by entering SPEAKER
SETUP and setting the DOWNMIX.
- LT/RT
LT/RT stands for teft and right soundtrack.
Select this item when the disc supports Pro Logic
Dolby Stereo. You have the opportunity to hear a program's soundtrack in the most accurate
and realistic presentation
possible.
- STEREO
For 5-channeI output, the left and right track signals are output simultaneously.
For your home
theater, set the menu to stereo.
--22-IB-PDV709-WM-E-061006

Safety

Operation

•

As the laser beam used in the DVD player
may be harmful to the eyes, do not attempt
to disassemble the cabinet. Refer servicing
to qualified personnel only (it is perfectly
safe if you don't unscrew and open the
cabinet).

•

If moving from a cold environment to a warm
environment,
let the player's temperature
stabilize before operation.
Moisture may
condense on the tens inside. Remove the
disc and wait about an hour for the moisture
to evaporate.

•

Should any solid object or liquid fail into
the player, unplug the player, and have it
checked
by qualified
personnel
before
operating it any further.

•

If the player has not been used for a long
time, turn the set to ON to warm it up for a
few minutes before inserting a disc.

Placement of Your DVD Player

Handling Discs

•

Do not leave the player in a location near a
heat source, or in a place subject to direct
sunlight,
excessive
dust or mechanicaI
shock.

•

Do not touch the playback side of the disc.
Every fingerprint
can cause playback
problems. Do not scratch the disk.

•

Do not place the player on an incline
unstable place, it may fatt and break.

Do not store the Discs in a place subject
to direct sunlight or near heat sources.

•

Do not place anything
within 2 inches of
the sides or back of the cabinet.
The
ventilation
holes must not be covered for

Cleaning Discs
•

the player to operate properly and to prolong
the Iife of its components.
•

Don't place this DVD player on lacquer
finished furniture without a cloth, wood or
glass protector in between.

•

Exposure to extreme hot or cold temperatures
may cause damage to the player or cause
it to malfunction.
Do not expose the player
to direct sunlight continuously or leave it in
a vehicle
with the doors and windows

•

Clean the cabinet, panel and controls with
a soft cloth slightly moistened with a very
mild detergent
solution or a plain damp
cloth. Do not use any type of abrasive pad,
scouring
powder,
or solvent,
such as
alcohol or benzine.

•

Never touch the lens with your fingers, if
the tens gets dirty, it will not play. Clean the
disc before use.

--23--

Do not

use solvents

such

as benzine,

thinner, commercially
available cleaners or
anti-static spray intended for vinyl LPs.

closed. The case may become deformed
or discolored or the player may malfunction.

Cleaning the Cabinet

Before playing,
make sure the disc is
clean. If not, clean the disc with a cleaning
cloth. Wipe the disc in a straight motion
from the center out.

If the disc
Sometimes
repaired
available

is scratched,
a scratched

it will not play.
disc can be

with a disc polishing
in many stores.

machine

IB-PDV709-WM-E-061006

Symptom

Remedy

No power.

1.The battery is depleted, please recharge the battery or use
the AC adaptor or car adaptor, make sure the AC outlet has power.
2.The fuse in the car adaptor is blown. To change the fuse,
unscrew the tip, replace only with same 3A 250V fuse.
3.The POWER switch is at the OFF position, please slide it to ON.

Battery is fully charged
but does not work.

The battery protective
circuit may have shut down the battery
for safety. To reactivate the battery, charge it for a while.

Battery drains too fast
in stop mode.

The set continues to be on even in stop mode. If you plan on
leaving the disc stopped for a longer time, turn the set's power
off to conserve battery power or use the AC adaptor.

• Play fails to start even
when PLAY is pressed.
• Play starts but then
stops immediately.

tNo image on the LCD
screen.

No picture
on your
external TV's screen.

1.The disc may be damaged or scratched.
2.This player cannot play a DVD disc other than region 1 standard.
3.The disc may be dirty and may require cleaning.
4. Ensure that the disc is installed with the label side up (facing you).
5. If your disc is rented, it may be scratched or damaged from a
previous renter. Return it or polish it.
6. Condensation
may have formed on your disc. Wait about 1
hour to allow the player to dry out.
The player's LCD may be turned off (as when you are using the
external TV).
1. Press the little button marked SCREEN OFF #12 on page 4.
2. Press and hold the SCREEN ON/OFF button on the remote.
1. Ensure that the equipment
is connected
properly.
Double
check all cables and AC power.
2. Select the proper video channel on your TV set, VIDEO 1,2, 3, etc.
3. Check if the proper AV input is selected on your TV set video
inputs (some TV sets have 3 or 4 different inputs).
4. Make sure both the TV and DVD player are on.
1. Picture is distorted during rapid advance or rapid reverse. The
picture may be somewhat distorted occasionally, this is normal.

The picture is distorted.

Some lines appear on
the screen during the
startup of the vehicle,
The
picture
seems
squeezed or stretched.

2. Did you connect your DVD player to your VCR? Please
connect the player directly to your TV and disconnect the VCR.
This player has Macrovision
copy protection, this will distort
pictures when used with VCRs.

Please turn the unit off and turn it on again after the vehicle
running.

The LCD mode and TV type you are in may be wrong for this
movie, try changing the LCD and TV type setting for standard
or widescreen.
See pages 20 & 21.

--24--

IB-PDV709-WM-E-061006

Symptom

Remedy

No sound from your TV or
speakers.

1. Press AUDIO button several times. The disc may have been
set to DTS output or a blank audio channel on multiple
language,
please select AC-3 output or reset to the main
language (refer to page 11).
2. Adjust the DVD player's volume.
3. Make sure the AUDIO output connection
and setting are
correct. See details on pages 17,18 and 22.
4. Ensure that the equipment is connected properly.
5. Ensure that the input setting for the TV and stereo system
are correct.
6.
7.
8.
9.

Adjust the volume setting on your TV's remote.
Make sure the headphones are detached from the DVD player.
The movie is paused, press play.
The movie is in search or fast play or other speed related play.
Audio is heard only during normal play.

There is no function or less
_
•_
c
t_

function when you adjustthe
color or the brightness of
the LCD screen using the
SCREEN ON/OFF and the
left or right direction buttons.

The REMOTE CONTROL
unit does not work.

No rapid advance
rapid reverse play.
Cabinet

vibrates

A specific
play.

disc

or hums.

does not

The
player's
controls
don't work or the player
cannot work properly.

The disc you used is a copied
fresh original disc.

one, please

replace

it with a

1. Check that the remote's batteries are installed correctly.
2. The remote's batteries are weak or depleted, replace them
with new ones (refer to page 8).
3. Use the remote control at a distance of less than 20 feet
(6m) from the DVD player.
4. Remove any obstacles between the remote control and
remote control sensor, also make sure the lens on the
remote control is not dirty.
Some discs may have sections which prohibit rapid advance
(or rapid reverse), especially on opening screens or during FBI
warnings.
This is normal

for high speed

reading

of DVD discs.

1.The disc may be dirty, try cleaning the disc.
2. Make sure the disc is not upside down.
3. The region code is not 1, the disc cannot be used.
4. Disc may not be industry standard or it may be an illegal
copy. Only use legally sold movies not pirated copies.
Set needs to be reset.
Reset the DVD player by removing the battery pack and
disconnecting the AC adaptor for 1 minute. Replace the battery
pack and AC adaptor to resume normal use. (The player may
not be operating properly due to lightning, static electricity,
damaged or wrong discs, or some other external factors).

-25

IB-PDV709-WM-E-061006

Symptom

Remedy

No sound during fast
forward or other speed
functions.

This is normal. Normal sound only happens during normal play.

Cannot change a menu
item.

Try changing

The LCD picture is not
16:9 widescreen
even

this item with the DVD door open (not during play).

You need to adjust both the LCD mode and the TV type mode to
16:9 (see pages 20 and 21).

Audio soundtrack and/
or subtitle language is
not at the initial settings,

If the audio soundtrack and / or subtitle language does not exist
on the disc, the tanguage selected at the initial setting wiii not be
heard/seen.
Try setting it up again, see Page 22.

No subtitles.

Subtitles appear only on discs which contain them. If subtitles
don't show, press the SUBTITLE button to display the subtitles.

you have set the
TYPE to 16:9.

Alternative

audio

Some discs only have one language

available.

On some discs, the

soundtrack (or subtitle)
language does not show.

alternate language cannot be selected by operating the AUDIO or
SUBTITLE buttons, try selecting it from the DVD menu if one is
available.

Angle cannot be
changed,

This function relies on the DVD disc. Only scenes recorded at
several angles can be viewed. Please refer to your DVD cover.

Picture is frozen,

If a button is pressed too fast over and over, the signals may jam
the circuits inside. To restore to normal, press the STOP button
and unplug the set from the AC outlet. Also remove the battery.

Screen saver appears
on TV screen,

Turn off screen saver
control or on the set.

Cannot copy discs
VHS video tapes,

You can't copy most commercial
movie discs due to copyright
protection
built into the disc and player.

Q
t_

by pressing

button

several

any button

times

on the

untiI

remote

Display shows numbers
on top of screen,

Press the DISPLAY
display
disappears.

Foreign
language
heard on the disc.

Press the AUDIO button until your preferred language is heard.

Foreign
language
seen in menus,

Reset the default language to your preferred language
the SUBTITLE button.

-26

the numbers

by pressing

IB-PDV709-WM-E-061006

TITLE
The longest sections of a picture or a music
piece on a DVD, or a movie, etc.. Each title is
assigned a title number enabling you to locate
the title you want.

VIDEO

CHAPTER

NTSC

Sections of a picture or a music piece on a
DVD that are smaller than titles. A title is

National
TV Systems
Committee
for TV
broadcasts: a video standard used in the USA
and Canada.

composed of several chapters. Each chapter
is assigned a chapter number enabling you to
locate the chapter you want.

CABLE

This is a wire with plugs on each end which is
used to transfer the picture information
into
your TV set.

JACK
This is another

term for socket.

JPEG
JPEG is short for the "Joint Photographic
Experts Group", a group of experts nominated
to produce standards for continuous tone image coding. In other words, your DVD player
can view digital picture CDs or CDs you made
on your computer with file names that end in
the ".JPG" format. This set will not play pictures encoded in formats other than JPG.
VIDEO

INPUT

This is a jack which accepts the picture portion
of a signal. In order to use this DVD player,
your TV set must have an S-Video (better) or
video input (standard) jack.
S-VIDEO

ABOUT DVD REGION
MANAGEMENT
The DVD inventors and motion
picture makers have decided to
break up the world's DVDs into
regions so that one country's
DVDs should not be able to play in another
country.
This is a legal issue and that is why your
DVD player is restricted to play only region 1
DVDs.

CABLE

This cable can connect to your S-Video input
of your TV. It allows for sharper pictures for
TV sets with this jack.

--27--

IB-PDV709-WM-E-061006

General Description
TFT

LCD screen

Power

size:

source:

AC adaptor:

100 - 240V, 50/60Hz,

Car adaptor:

12V input, 12V, 2A output (included),

Power

consumption:

17 Watts [normal household
the standby mode).

Signal

system:

NTSC TV system

Video output level:

1.0 Vp-p

Audio output level:

1 vrms (1 kHz, 0dB)

Dimensions

Length: 259 mm
Width: 181 mm

10 3/16"
7 1/8"

Height: 50 mm
Weight: 1.35 kg

1 15/16"
31bs

(Approx.):

DC 9V, 2A output

current]

(approx.

(included)

fuse 3A, 250V

3W when the set is in

Audio Signal Output Characteristics:
DVD (linear audio):
(1) Frequency

response:

4Hz-22kHz

(48 kHz sampling)

4Hz-44kHz

(96 kHz sampling)

(2) S/N ratio: 100dB
(3) Dynamic range: 90 dB
(4) Wow and flutter: below measurable

level

CO audio:

Pickup:

(1) Frequency

response:

20 Hz - 20 kHz

Wave length: 650nm~660nm
Laser power: Class 1

(2) S/N ratio: 65dB
(3) Dynamic range: 90 dB
(4) Wow and flutter: below measurable
We reserve

the right to make design

The descriptions
and characteristics
and not as a guarantee.
In order to
the right to make any improvement
serves as the final reference on all
arise in other languages.

level
and specification

changes

for product

improvement.

given in this document are given as a general indication
provide the highest quality product possible, we reserve
or modification
without prior notice. The English version
product and operation details should any discrepancies

PROTECT
YOUR FINE FURNITURE!
WE RECOMMEND A PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING
IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.

-28

IB-PDV709-WM-E-061006

LIMITED

WARRANTY

We warrant this product to be free from defects in materiat and workmanship under normat
use for a period of 1 year after purchase, and we will repair it free of charge or replace it at no
charge, should it become defective under this warranty, providing you submit proof of purchase
(sales slip) with the set.
During the initial 1 year period after original purchase, we will service the set that is returned
to LENOXX ELECTRONICS CORR, prepaid, at no charge. After the initial 1 year period expires,
we will exchange, at no charge, any part that is defective, but will charge for the cost of labor,
return postage paid by Lenoxx.
This warranty does not apply to any product which has been subject to misuse, neglect or
accident. This warranty does not cover a broken cord or cabinet. UNDER NO CIRCUMSTANCES
WILL LENOXX ELECTRONICS CORR BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion
or limitation of incidental
or
consequential damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. The following charges apply to repairs beyond the warranty period: $ 30.00.
Be sure to pack carefully
and return postage paid insured together
order (personal checks will not be accepted) and sales receipt to:
LENOXX

ELECTRONICS

CORR,

38 BRUNSWICK

AVENUE,

EDISON,

with your
N.J. 08817,

money
USA

For Customer
Service
Dial: 1-800-315-5885
(MONDAY - THURSDAY 8:00 AM - 5:00 PM, FRIDAY 8:00 AM - 1:30 PM EST)
or Visit Our Website: http://www.lenoxx.com
or Email: evergo@att.net

ELECTRONICS

35 BRUNSWICK

CORP.

AVENUE

EDISON, N.J. 08817, USA
MADE & PRINTED IN CHINA

--29--

IB-PDV709-WM-E-061006

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 30
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 4, 0, 0, 13
Create Date                     : Thu Mar 20 04:33:07 2008
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

DURABRAND DVD Systems Manual L0803280

Navigation menu

Versions of this User Manual:

Views

Navigation