DURABRAND DVD Systems Manual L0803280

User Manual: DURABRAND DURABRAND DVD Systems Manual DURABRAND DVD Systems Owner's Manual, DURABRAND DVD Systems installation guides

Open the PDF directly: View PDF PDF.
Page Count: 30

MODEL PDV-709
PORTABLE DVD PLAYER
INSTRUCTION MANUAL
• Plays DVDs, Audio CDs, CD-R/RW, MP3 CDs and Picture CDs
•Includes Rechargeable Battery for Portable Use Anywhere
•Includes AC Adaptor
•Includes Car Adaptor for Travel
•Connects to Your Larger Screen Home TV (cable included)
PLEASE READ CAREFULLY BEFORE USE
IB-PDV709-WM-E-061006
WARNING ]
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THE PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH WIDE
BLADE PLUG TO WIDE SLOT, FULLY INSERT.
The lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended
to alert the user to the presence
of uninsuIated "dangerous
voltage" within the product's
enclosure that may be of
sufficient magnitude to
constitute a risk of electric
shock to persons.
CAUTION
WARNING: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR
BACK). NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the
appliance.
Rating plate and caution marking are marked on the bottom enclosure of the apparatus.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings, install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has
two blades with one wider than the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
lO.Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
1 2. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,
or sold with the apparatus. When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personneI. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spiited
or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally or has been dropped.
15. This appliance shaN not be exposed to dripping or splashing water and that no object filled with
liquid such as vases shall be placed on the apparatus.
IB-PDV709-WM-E-061006
1
Do not apply oil or petroleum products or solvents to any part of this set.
FCC NOTE
]-his device complies with Part 15 of the FCC Rules. Operation is subject to the following twc
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesirable operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmfuI interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures.
- Reorient or relocate the receiving antenna.
- increase the separation between the equipment and receiver.
- Connect this equipment into an outtet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
rNOTE
This product incorporates copyright protection technology that is protected by method claims
of U.S. patent numbers 4,631,603; 4,819,098; 4,907,093; 5,315,448; and 6,516,132 and
other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only, unless otherwise authorized by
Macrevision Corporation. Reverse engineering or disassembly is prohibited.
CAUTION
Use of controls or adjustments or
performance of procedures other than
those specified herein may result in
hazardous radiation exposure. Do not
open covers and do not repair yourself.
Refer servicing to qualified personnel.
This DVD VIDEO player is classified as
CLASS 1 LASER PRODUCT as stated
on the bottom of the set.
INCLUDED ACCESSORIES
The following items are included with your
DVD player:
- Remote Control
- AAA Batteries (2)
- Rechargeable battery
- AC adaptor
- Car adaptor
- Audio/Video cable
- User's Guide
- Product Registration Card
IB-PDV709-WM-E-061006
--2 --
• Getting Started:
Safety Instructions
Controls Overview
Power Supply
Remote Control Operation
Notes on Discs
• Basic Operation:
1
.4
7
8
9
1. Playing a Disc ..................................................................................... 10
2. Using the Search Functions 11
3. Selecting Audio Mode ........................................................................... 11
4. Changing Subtitle Language .................................................................. 11
5. Displaying Disc Information 12
6. Repeat Play 13
7. Slow-Motion Play 13
8. Zoom Play 14
9. Search for Preferred Play ....................................................................... 14
10. Viewing Angle Shots- 15
11. Programmed Play 15
12. MP3 Disc Operation .............................................................................. 16
13. JPEG or Picture Disc Operation. 16
•Connection
System Connections 17
Watching a DVD on Your TV 19
• Initial Setting:
System Setup (TV System, LCD Mode, TV Type & Default)
Setting the TV System .20
Setting the LCD Mode ............................................................................ 20
Selecting the TV Type ............................................................................. 21
Default - Resetting the Functions to Factory Defaults
Language Setup (OSD, Audio, Subtitle & Menu)
Audio Setup
Video Setup
Speaker Setup
21
22
-22
.22
22
•Precautions ................................................................................................ 23
•Trouble Shooting .24
•Glossary 27
•Specifications .28
3 IB-PDV709-WM-E-061006
Front View
12
13
14
15
16
_17
_18
19
3 4 5 6 7 8 9 1011 3
1. TFT LCD SCREEN - Provides a high resolution picture.
2. DISC DOOR - Open the door by pressing the open button and set the disc inside it.
3. SPEAKERS - Provide stereo sound.
4. ON/STANDBY INDICATOR - The indicator lights up in red when the set is in standby
mode and in green when the set is on.
5. SKIP/SEARCH BACKWARD 144 -Press to skip to the previous title, chapter or track.
Press and hold to scan backwards.
6. SKIP/SEARCH FORWARD _ - Press to skip to the next title, chapter or track. Press
and hold to scan forwards.
7. VOLUME BUTTONS - Press to adjust the volume (up is +, down is -).
8. STOP BUTTON • - Stops playback, press twice for full stop.
9. PLAY/PAUSE BUTTON _ll -Press to start or pause play.
10. REMOTE SENSOR - Receives signals from the remote control.
11. OPEN BUTTON - Press to open the disc door.
12. SCREEN OFF BUTTON -When you fold down the LCD screen, the LCD panel wilt push
this button and turn off the LCD screen but keeps the set working for viewing DVDs on
your TV. This is useful when the AUDIO/VIDEO cable is connected.
13. TITLE BUTTON - Press to display the title menu (only if it is present on the disc).
14. MENU BUTTON - Press to display the disc's menu (only if your disc has a menu).
15. SETUP BUTTON - Press to display the DVD player's setup menu.
16. GOTO BUTTON - Press to display the GOTO menu then press the direction buttons to
select the desired disc starting time, track or title for playback.
17. OK BUTTON - Press to confirm a selection.
18. DIRECTION BUTTONS - Used to select options and DVD menus and MP3 tracks.
19. SUBTITLE BUTTON - Press to select or change the subtitles (if available on your disc).
20. AUDIO BUTTON - Press to select the audio channel (or director's cut channel).
21. DISPLAY BUTTON - Press to view the disc information and times.
4 IB-PDV709-WM-E-061006
Right Side View
1 2 3 4 5 6 7
1. PHONES JACK - Insert your headphones (not included) to enjoy the sound without disturbing
others.
2, COAXIAL JACK - Connects the DVD player to your home theater system using a coaxial
cable (coaxial cable is not included).
3. VIDEO OUT JACK - Connects the DVD player to your large screen TV using the supplied
video cable.
4. AUDIO OUT JACKS - Connect the DVD player to your TV or home theater system using
the supplied audio cables.
5. S-VIDEO JACK - Connects the DVD player to your TV using an S-Video cable (S-Video
cable is not included).
6. POWER ON/OFF SWITCH - Slide to switch the DVD player ON or OFF.
7. DC IN JACK - For connecting to the supplied AC adaptor or car adaptor.
Recharqeable Battery
1 3
1. RECHARGEABLE BATTERY - For DC power supply.
2. BATTERY TAB - Push to remove the battery.
3. BATTERY LED INDICATOR - Will flash when battery is charging and remain steadily on
when battery is fuiiy charged.
5 IB-PDV709-WM-E-061006
REMOTE CONTROL
20
1
2_
3
4_
5m
6
7m
8
10--
11--
12
m13
14
--15
m16
_17
_18
19
1. ON/STANDBY button -Press to turn the set
ON or STANDBY.
2. SCREEN ON/OFF button - To turn the LCD
screen ON or OFF (for external TV use only),
press and hold this button. To adjust the color or
brightness level of the LCD screen, press this
button to display the LCD screen color or
brightness function, then press the Ieft or right
direction button to adjust the level.
3. MENU button - Press to display the disc's menu
(only if your disc has a menu).
4. TITLE button - Displays the title menu (only if
it is present on the disc).
5. 144/_ button - Press to skip to previous
title, chapter or track /press and hotd more than
1 second to scan backward.
6. _,.).l/_,€'-button - Press to skip to next title,
chapter or track /press and hold more than 1
second to scan forward.
7. DIRECTION buttons -Used in DVD menus &
audio MP3 track selection.
8. OK button - Press to start/pause play or
confirm a selection or command.
9. NUMERIC buttons - Used in DVD menus
& audio CD/MP3 track selection.
10. ANGLE /PROGRAM button -In DVD mode, press to display angle menu (if present on the
DVD disc); Press to program your favorite track in CD/MP3 mode.
11. VOLUME buttons - Press to adjust the volume level (remember to also adjust your TV's
volume).
12. SETUP button - Press to display the DVD player's setup menu.
13. DISPLAY button - Press this button to view the elapsed time, title or chapter
information and the track numbers during play.
14. STOP button - Stops play, press twice to full stop.
15. SUBTITLE button - Press to setup the subtitle (if available on your disc).
16. AUDIO button - Press to select the desired audio channels.
17. GOTO button - Allows you to select the desired disc starting time, track or title for playback.
18. REPEAT button - Press this button to repeat the current track, chapter, title, a chosen
section (A to B), or all of the disc.
19. ZOOM/SLOW button - Press to zoom (enlarged) the playing picture in DVD mode or hold
more than 1 second to view slow motion playback.
20. REMOTE CONTROL lens - Sends the signal to the set. Do not block or cover this,
keep this clean for best operation.
NOTE: The remote control witt only work when power is on. Please turn on power with the
switch on the right side of the set.
6 IB-PDV709-WM-E-061006
You can power this portable DVD player by connecting the AC adaptor, the car adaptor or the
rechargeabte battery (all included).
A. Using the AC adaptor
This player is supplied with an AC adaptor for powering the
unit and charging the battery.
Insert the AC adaptor plug to the DC IN jack on the portable
DVD player and connect the adaptor to a wall outlet.
B. Using the car adaptor (12V)
This player is supplied with a 12V car adaptor for powering
the unit and recharging the battery while in a vehicle that
has a 12V power system. _...............................
Insert the car adaptor plug to the DC IN jack on the
portable DVD player and connect the car adaptor
to the vehicle's 12V accessory /cigarette lighter
socket, the car adaptor indicator will light up.
CAUTION:
1. The included car adaptor is for use with this unit only. Do not use it with other equipment.
2. Use this unit only with the included car adaptor, using with other car adaptors could damage
the unit and the unit may not work.
3. Do not operate this unit or view video movies while driving a vehicle.
4. If some lines appear on the screen during the startup of the vehicle, please turn the unit off
and turn it on again after the vehicle is running.
5. Place the unit in a proper position for viewing.
6. When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may
become hot or not work due to poor contact. Be sure to clean the cigarette lighter socket before use.
7. Disconnect the car adaptor from both the unit and the cigarette lighter socket when the
battery is fully charged and the unit is not in use.
C. Using the rechargeable battery
The rechargeabte battery pack is suitable for portable use which allows you to enjoy the
unique functions of this unit outdoors.
Remember to charge the battery fully before
initial use (about 5 hours), slot
Attaching the Battery (refer to the diagram on the right)
1. Make sure the player is off and the AC adaptor or car adaptor is
disconnected.
2. Place the DVD player on a soft and smooth surface with the bottom
of the unit facing up.
3. With one hand on the DVD player to prevent it from moving, take the
battery and align the plastic tabs on the battery with slots on the
player, and slide it forward to lock, The battery will click into place.
Detaching the Battery (refer to the diagram on the right)
1. Make sure the player is off and the AC adaptor or car
adaptor is disconnected. ,9
2. Push the tab on the battery down.
3. Slide and lift the battery out. @ \
To charge the battery tab
1. Insert the AC adaptor's plug into the DC IN jack on the DVD player and connect the AC
adaptor to a wail outlet. After 5 seconds, the battery LED indicator wil! turn on and start to flash.
7 IB-PDV709-WM-E-061006
2.ThebatteryLEDindicatorwittflashwhenthebatteryischargingandremainsteadilyon
whenthebatteryisfullycharged.
3.Chargingtimeisabout5hours.Afullychargedbatterydeliversabout2.5hoursofviewingtime.
4.Tochargethebatteryusingthesuppliedcaradaptor,followpointBonthepreviouspage.
NOTE:WheninsertingthebatterywhilethesetisACpoweredorcarpowered,therewillbea
delayofseveralsecondsbeforetheLEDlightsup.Thisisbecausethebatterycharging
circuitneedstoresetanddetectthebatterystatus.
Working conditions and precautions for the rechargeable battery
•New batteries should be fully charged before initial use (about 5 hours).
• Battery should be changed by an adult for safety.
• Battery should only be used and charged when temperatures are between 32 -100°F.
• Never put the battery in fire or water.
• Do not expose the battery to high temperatures or store in hot, sunny places.
• Do not short the battery terminals.
• Do not open the battery.
• When the battery is weak, the ON/STANDBY indicator wilI flash and the Low Power icon
+'[_" will appear on the LCD screen and then the power automatically turns off. If this
occurs, please use the AC adaptor to recharge the battery or play the set on AC power.
1. Push the tab to open the battery cover.
2. Insert 2 size "AAA" alkaline batteries
(included) into the battery compartment
according to the + and - markings
inside the battery compartment, then
replace the battery cover.
NOTE:
• Point the remote control unit from less than 20 feet (6 m) from the remote sensor and within
about 60°of the front of the unit.
• Batteries should be changed by an adult for safety.
• Reversing polarities will damage the batteries and possibly your remote. Be sure to follow
polarities ( + and -) as indicated.
• Do not mix different types of batteries together (Alkaline, Carbon-Zinc, Nickel-Cadmium
etc.), or old batteries with new ones.
• When the batteries have become discharged,they must be disposed of in a safe manner that
complies with all applicable laws.
• When the batteries becomes weak, the operating distance of the remote control decreases
and you witt need to replace the batteries.
• When the remote control is not to be used for a long time (2 months or more), remove the
batteries to avoid possible damage that may be caused by battery leakage.
• Avoid keeping the remote control in extremely hot or humid locations.
• Do not point bright lights at the remote control sensor (like laser pointers).
• Do not place objects between the remote control unit and the remote controI sensor.
• Do not use this remote control while using the remote control unit of any other equipment at
the same time, the signals may mix. 8 IB-PDV709-WM-E-061006
Discs that can be played
DVD Video
(Region 1) _ _ Video+Audio
VIDEO
DVD-R /DVD-RW _ _ Video+Audio
VIDEO
JPEG disc ".JPG" or "JPEG" Video onty (Photos)
or Audio /Video
Music CD Audio only
I3IGITAL AUDIO
[_o_ Audio only
CD-R disc or Audio /Video
_[_o_ Audio onty
CD-RW disc or Audio /Video
MP3 disc M P-3 Audio only
NOTE: A hand symbol " _ " may appear on the screen when pressing some buttons. A " _._"
means that the operation is not permitted by the DVD player for the disc in that mode
or at that time. Sometimes, the set needs to be in stop mode or other modes for that
button to work.
Discs that cannot be played
CD-Is, CD-ROMs (including computer software discs and game discs), data part of CD-Extras,
DVD-ROMs, DVD Audio discs, DIVX, MPEG 4 DVD discs, HD layer on SACDs or discs recorded
in another format such as SECAM, and regions other than your region. This set wil! also not play
damaged, scratched or dirty discs.
9 IB-PDV709-WM-E-061006
1Lift the LCD screen.
2Slide the DVD player's POWER switch to the ON position, the DVD logo (start-up picture) will
appear on the screen.
3Press the OPEN button on the DVD player to open the disc
door. Place a disc gently on the tray with the label side up, make
sure the disc is seated on the spindle by pressing down in the center,
then close the door by pushing it down. The DVD player starts to
read the disc's table of contents (this may take a few seconds).
NOTE 1: Load the disc with the label side facing up, when
playing a double-sided disc, load it with the desired
playing side face down.
/ NOTE 2: "NO DISC" will show in the display if the disc is upside
/ down or the disc is badly scratched or dirty, it will not
play. Please clean it or change the disc before use.
Also you can buy a disc polisher to try to repair the
scratched disc.
4 Some discs will start playing automatically, and others will display the Disc Contents Menu on
the screen. If the menu is shown, use the ("9, I_, A & V) direction buttons to highlight your
selection and press the OK button to confirm, otherwise you may press play.
5 Press the VOLUME + or VOLUME - button to adjust the volume level.
6Press the SCREEN ON/OFF button on the remote control, then press the left 41 and right I_
direction buttons to adjust the brightness and the color of the LCD screen if needed.
7To stop playback, press the STOP button.
8 To pause the playback, press the OK button I_ll on the remote control or the PLAY/PAUSE
button on the player. To resume playback, press the OK button ),'mon the remote control
or the PLAY/PAUSE button on the player again.
NOTE 1 : During play, pressing the STOP button once will show "PRE STOP _i" in the
display, if you press the STOP button the second time, the display will show
"STOP I" and now your system is in the full STOP mode.
NOTE 2: Leaving the set in the stop mode for a longer time wilt drain the battery the same
as during normal play, remember to shut off the power after use.
9To skip to another track/chapter, press the SKIP/SEARCH _ or SKIP/SEARCH _ button
repeatedly during playback.
10 To access the disc menu or title menu during DVD play, press the MENU or TITLE button
on the remote control or on the DVD player.
11 Remember to shut off the player by sliding the POWER switch to the OFF position when
the movie finishes playing.
NOTE: This player has a screen saver which will display a bouncing DVD logo if no video is
played for a while.
10 IB-PDV709-WM-E-061006
Duringplay,youcansearchquicklythroughachapterortrack.
Search through a chapter or a track
1 During play, press and hold the SKIP/SEARCH _ button to search forward at a faster
speed, the fast search speed changes as follows:
FORWARD X2 _ _ FORWARD X4 _ _ FORWARD X8 _ _ FORWARD X20
---_ PLAY _.
2During play, press and hold the SKIP/SEARCH |4F_I button to search backward at a faster
speed, the search speed changes as follows:
BACKWARD X2 _41 ---_ BACKWARD X4 _ ---_ BACKWARD X8 _ ---_ BACKWARD
X20 _ ---)-- PLAY _-
NOTE: In any fast forward or fast backward mode, press the OK button on the remote control
or press the PLAY/PAUSE button on the player to return to normal play mode immediately.
If a DVD disc contains a Multi-Audio soundtrack feature, you can select the desired audio
language by pressing the AUDIO button on the set or on the remote control repeatedly during
play, playback status will be displayed on the screen. The AUDIO button can also select
director's cuts dialogue and other disc dialogue.
NOTE 1: If you press the AUDIO button for several times, but the desired language is not
selected, it means a second language is not available on the disc.
NOTE 2: This DVD player does not support DTS decoding. For discs with DTS decoding,
please press the AUDIO button to select another audio output mode, such as
AC-3 or until you hear the sound.
(DVD ONLY)
You can select a desired subtitle quickly and easily with the SUBTITLE button on the set or on
the remote control.
NOTE: This operation works only with DVD discs on which multiple subtitle languages are
recorded. Some DVDs have no subtitles, some may have 5 or more. If no subtitles are
recorded on your DVD, pressing this button wiIi not change the subtitles.
To remove the subtitles display, press the SUBTITLE button again until " _ : [OFF] " shows.
11 IB-PDV709-WM-E-061006
Ifyouwanttoknowdiscinformationduringplay,presstheDISPLAYbuttonontheremote
controlorontheset,thediscinformationwiitappearonthetopofthescreenasshownbelow:
For DVD Play
I DVD TT 1/2 CH 6/12 (_ 00:02:35
o)) 1/3ENG 5.1CH 2/3ENG
Drl OFF
DVD TT 1/2 CH 6/12 C-00:06:41
,L
/DVD TT 1/2 OH 6/12 T00:18:05 I
J
k
[DVD TT 1/2 OH 6/12 7-01:05:40 J ,==._
OFF
I The information about the title/chapter number
and chapter elapsed time is shown.
The information about the AUDIO, SUBTITLEand ANGLE is shown.
._ he information about the chapter remaining
time is shown.
The information about the title elapsed time is
shown.
The information about the title remaining time
is shown.
._ The information display goes off.
For CD Play
CD TRK 2/12 ,4e
CD TRK 2/12 ,4e-"
I CD TRK 2/12 '4e
CD TRK 2/12 ,4e
OFF
_ 00:01:03
€2_ C-00:02:42
T 00:10:49
T-00:40:35
._ The information about the current track
elapsed time is shown.
J _ The information about the current track
remaining time is shown.
._ he information about the total track elapsed
time is shown.
The information about the total track remainingtime is shown.
._ The information display goes off.
For MP3 Play
I MP3 TRK 2/124,4e _ <_ 00:03:03
MP3 TRK2/1244e _ C-00:01:36
OFF
._ he information about the current track
elapsed time is shown.
] .=,_ The information about the current track
remaining time is shown.
,_ The information display goes off.
NOTE 1:"TT" stands for title, "CH" stands for chapter, and "TRK" stands for track.
NOTE 2: Depending on the disc, the above information may not appear on your screen or you
may not be able tochange the display.
12 IB-PDV709-WM-E-061006
TheREPEATbuttonallowsyoutorepeatthecurrenttrack,chapter,title,achosensection(A-B),or
alIofthedisc.
EachtimeyoupresstheREPEATbuttonontheremotecontrolrepeatedly,therepeatmode
changesasfollows:
For DVD
REP: [CHAPTER] REP: [TITLE]
WILL REPEAT THIS WILL REPEAT THIS
CHAPTER OVER AND OVER TITLE OVER AND OVER
REP: [REP ALL] REP:
WILL REPEAT THIS
DISC OVER AND OVER
r
A B CANCEL _/ REPEAT A B
"A B CANCEL" SHOWS AND
NORMAL PLAY RESUMES
NORMAL PLAY
REPEAT A
REPEAT A TO B SEGMENT OVER AND OVER.
NOTE: When you select "A TO B" repeat play:
1. Press the REPEAT button until "REPEAT A- " appears at the beginning of the segment
(point A) you want to play repeatedly.
2. Press REPEAT button again at the end of the segment (point B), "REPEAT A-B" wilt
appear on the display.
3. The DVD player wilI automatically play the selected segments A to B over and over till
you press REPEAT button again.
For CD
REP: [REP 1] _ REP: [REP ALL] _ REP: [OFF] _ REPEAT A- _ REPEAT A-B
A-B CANCEL
For MR3
REP: [REP 1] _ REP: [REP DIR] _ REP: [REP ALL] _ REP: [OFF] _ REPEAT A -
REPEAT A-B _ A-B CANCEL
(JUST FOR DVD)
A disc can also be played in slow-motion by pressing the ZOOM/SLOW button.
1Each time you press and hold the ZOOM/SLOW button on the remote control during play, the
playback speed will change as follows:
SF 1/2 _ SF 1/3 _ SF 1/4 _ SF 1/5 ._- SF 1/6 ._J,,- SF 1/7 ._- PLAY _,-
2Press the OK button on the remote control to resume normal play from any stow-motion
mode.
NOTE 1 :Sound will be silent during slow motion play.
NOTE 2: SF stands for SLOW FORWARD.
IB-PDV709-WM-E-061006
13
(FOR DVD)
The ZOOM/SLOW button allows you to do a minimal zoom into a picture as wel! as shift the
zoom point.
1Press the ZOOM/SLOW button on the remote control repeatedly to enlarge or reduce a picture.
The display wilI show as follows:
ZOOM 2 _ ZOOM 3 _ ZOOM 4 _ ZOOM 1/2 _ ZOOM1/3 _ ZOOM1/4 _ ZOOM: OFF
2Press the direction buttons (A, V, "_ & _1_)to move the enlarged picture up, down, left or right.
3To return to normal ptay from the ZOOM mode, press the ZOOM/SLOW button repeatedly till
the icon shows "ZOOM: OFF".
NOTE 1: Some discs may not respond to the zoom feature and during some zoom functions
the picture edges may seem fuzzy, this is normal.
NOTE 2: When reducing to smaller sizes, the black area around the picture wilI enlarge, this
is normal.
To select a scene with the title, the chapter,
the track number or the time during play use
the GOTO button.
1 Press the GOTO button during play, the
screen wilI show as on the right:
2Move the LEFT and RIGHT direction
buttons ( "_ & I_ ) and press the number
buttons on the remote control or UP and
DOWN direction buttons (A & V) to
select the title, the track, or the time,
then press the OK button to confirm.
3The player will jump to ptay the section
you selected and the menu display
disappears from the screen.
NOTE:
The search function may not work during
the opening screens of many DVDs, such
as the FBI warnings etc.
Press GOTO for DVD
for searching by title, chapter & time
DVD TT 01/02 CH 002/013 (_ 00:02:03 I
t t t
title you want chapter you want time you want
to jump to to jump to to jump to
Press GOTO for CD
CD TRK 02/12 _
t
track you want
to jump to
_ 00:03:11 I
input the second
youwant to jumpto
Press GOTO for MP3
I MP3 TRK 0016/154t ,11_ _ _ 00_1:2fl
track you want inputthe minute
to jump to you want to jump to |
input the second
youwant to jumpto
14 IB-PDV709-WM-E-061006
(DVD ONLY)
Some DVD video discs may contain scenes which have been shot simultaneously from a few
different angles. This icon _ witI be on the DVD case if it contains these multi-angle shots.
Certain scenes can be viewed from many different angles by pressing the PROGRAM/ANGLE
button on the remote control.
NOTE: 1. The recorded angles differ depending on the disc used.
2. Onty some DVD discs have this feature (very few).
3. If this feature is not available on your DVD, a hand "_" wil! show in the top left corner
when the PROGRAM/ANGLE button is pressed.
You can make a program of up to 16 tracks in the order you want them to be played. This feature
can be used on CD and MP3.
1Press the PROGRAM/ANGLE button on the remote control, the screen wilI display the program
menu:
PROG
2
3
4
9 13
6 10 14
7 11 15
8 12 16
PLAY CLEAR
2Use the number buttons and the direction buttons to enter the track numbers of the songs on
the disc into the numbered positions. The positions represent the order in which you would Iike
the songs to be played in.
3After programming, press the direction buttons to select PLAY, then press OK button on the
remote control, the player wil! start to play the disc in the programmed order you selected.
4 To skip to the next (programmed) track, press the SKIP/SEARCH _ button.
5 To stop programmed playback, press STOP button twice, or open the disc door.
15 IB-PDV709-WM-E-061006
ThisallowsyoutoplayyourMP3audiorecordeddiscyoumadeonthisset.Thissetwittnot
playWMAformatsongs.WhenrecordingyourMP3disconyourcomputer,pleaserecordthe
songsinMP3format.
1Load your recorded MP3 disc into the player, a menu wil! show on the screen.
2Select the desired folder by pressing the UP or DOWN button.
3Press the OK button to open the folder.
4 Select the desired track by pressing the UP or DOWN button.
5 Press the OK button to start playback.
6You may use the SKIP/SEARCH _ or _ button to skip to the previous or next track.
7Press and hold the SKIP/SEARCH _ or _ for fast backward or fast forward play.
8 Press STOP button to stop playing.
You can play your JPEG or picture disc on this set.
1Load a JPEG disc or picture CD disc into the player, a menu wilI show on the screen.
2Go to the menu of directory which you want to view by using the direction buttons, press
the OK button to start the JPEG play.
3During the picture show, use the (A /•/•/4) direction buttons to rotate, invert, or mirror
the picture left or right.
4 Press the PROGRAM/ANGLE button on the remote control to change the picture display
directions, the picture display will start from the top, or the bottom or the left or the right or
any of the corners.
5 Press the ZOOM/SLOW button on the remote repeatedly to enlarge or reduce a picture. The
display wi!I show as follows:
ZOOM 2 _ ZOOM 3 _ ZOOM 4 _ ZOOM 1/2 _ ZOOM1/3 _ ZOOM1/4 _ ZOOM: OFF
To move the enlarged picture in any direction, press any of the (A /•/•/_1) direction
buttons.
To return to normal view, press the ZOOM/SLOW button till "ZOOM: OFF" shows on the screen.
6Press the SKIP/SEARCH _ button to see the next image in your folder.
7Each picture in the current directory will be displayed consecutively in a slide show
presentation.
16 IB-PDV709-WM-E-061006
For TV Connection
This DVD player can also be used to view movies on your large screen TV. When viewing on
your TV, you may fold the screen down to shut off the TFT LCD display.
Always ensure when connecting cables, the DVD player, TV and any other electrical equipment
are turned off and not plugged into the AC outlet.
Ensure that you observe the color coding when connecting audio and video cables.
1. Connecting the DVD player to your TV
Using the attached A/V cables
Connect one end of the audio/video cable plugs to the audio/video out jacks on the DVD player
and other end to the audio/video in jacks on your TV by following the color codes on the jacks
and plugs (refer to diagram A).
Diagram A
Please follow the ] YOUR TV
cable ptug colors. _ I I I
S-Video connection (S-VIDEO cable is not included)
S-Video will provide sharper images than normal video.
Insert the audio plugs (white and red) into the audio out jacks on your DVD player and the audio in
jacks on your TV by following the color of the plugs and jacks (refer to diagram B).
Connect the DVD player's S-VIDEO jack and your TV's S-VIDEO jack by using an S-VIDEO
cable (not included).
Diagram B
YOUR TV
17 IB-PDV709-WM-E-061006
For TV Connection
Connecting to a digital home theater system using a coaxial cable
Refer to your home theater system's manual before connection.
For Video, insert the video plugs into the video out jack on your DVD player and the video in
jack on your TV.
For Audio, connect the DVD player's COAXIAL jack and your home theater system's COAXIAL
jack by a coaxial cable (not included).
YOUR TV
YOUR HOME
THEATER SYSTEM
OR AMPLIFIER
NOTE: Coaxial connection will provide a higher quality sound effect.
2. Connecting to your headphones (headphones are not included)
Turn down the volume of the DVD player and connect the headphones (optional, not included)
to the DVD player's PHONES jack, when headphones are connected, the speakers of your
DVD player will automatically turn off. Adjust the volume to your taste (but not too loud).
18 IB-PDV709-WM-E-061006
After al! the connections have been done, please follow steps below to watch a DVD on your TV.
1Make sure all of the equipment is plugged back into the AC outlet.
2Lift the DVD LCD screen.
3Slide the DVD player's POWER switch to the ON position, the DVD logo (start-up picture) will
appear on the screen.
4 Turn on your TV and set it to DVD mode (please see box below), the DVD logo will appear on
your TV's screen.
5 Press the OPEN button on the DVD player to open the disc door. Place a disc gently on the
tray with the label side up, make sure the disc is seated on the spindle by pressing down in
the center, close the door by pushing it down. The DVD player starts to read the disc's table
of contents (this may take a few seconds).
6Some discs will start playing automatically, and others will display the Disc Contents Menu on
the screen. If the menu is presented, use the (_1, I_, A & V) direction buttons to highlight your
selection and press OK button to confirm.
7Press the VOLUME + or VOLUME - button on the DVD's remote control and on your TV's
remote control to adjust the volume level.
8 Fold down the LCD screen cover, the DVD player will continue to work, but the screen will
be dark.
9To stop playback, press the STOP button.
10 To pause the playback, press the OK button _-II on the remote control. To resume playback,
press the OK button I_m again.
NOTE 1 : During play, press the STOP button once, the display wilt show " PRE STOP _ ".
If you press the STOP button the second time, the display wil! show " STOP •"
and now your system is in the full STOP mode.
NOTE 2: Leaving the set in the stop mode for a longer time wilt drain the battery the same
as during normal play, remember to shut off the power after use.
11 To skip to another track/chapter, press the SKIP/SEARCH _ or _ button repeatedly
during playback.
12 To access the disc menu or title menu during DVD play, press the MENU or TITLE button
on the remote control.
13 If you want to use other DVD play functions, please see pages 11-16.
14 Remember to shut off the player by sliding the POWER switch to the OFF position when
the movie finishes playing.
How to Find your TV's Video Input Channel
Make sure you have made all the connections (see page 17), you may need to change
your TV's video input mode to see the DVD player's menu and movies, also double check
that both TV and player are plugged into the AC outlet.
1. Set your TV to the correct video input. For example, if you connect this player to the
VIDEO 1 input on your TV, switch your TV to video 1.
2. Switch your TV to the correct video input channel. The video input channel varies with
different TV brands and models, many TV remote controls have a TV/VlDEO button
which can be used to change to different video inputs and back to TV for normal
broadcast viewing, on some older TVs, you may need to press channet 3 or 4 on your
TV's remote. Once you selected the correct channel, your TV will show the opening
DVD screen. For more details, please see your TV's manual.
19 IB-PDV709-WM-E-061006
For TV or Portable Use
When using the DVD player for the first time, you may need to set some of the settings and
adjustments according to your TV and favorite preferences.
You can get to the SETUP menu by following the below steps.
1Press the SETUP button, a SETUP menu wilI
appear on the TV screen.
2use the A /•/•/_1 direction buttons on the
DVD player or on the remote control to highlight
your selection.
3Press the OK button to confirm your selection.
4 When the setup has been done, press the
SETUP button to exit the SETUP mode.
SYSTEM SETUP (TV SYSTEM, LCD MODE, TV TYPE & DEFAULT)
Setting the TV SYSTEM (only when you ere using your TV to watch the picture).
-NTSC
A USA video standard. If your TV is NTSC system,
select this mode.
-AUTO
If the connected TV is multi-system, select this
mode. The output format will be in accordance
with the video signal of the disc.
Setting the LCD MODE
This allows you to set the aspect ratio of the LCD
screen.
4:3
16:9
-20 IB-PDV709-WM-E-061006
Selecting the TV TYPE
Select the aspect ratio of the movie to match the
LCD screen and your TV set. There are three types
of screen sizes you may select.
NOTE: If your DISC is not encoded to allow you to
change the aspect ratio, the TV display
cannot be changed.
4x3 Standard
4X3 Le_erbox
16X9 Widescreen
4 X 3 Standard (4:3 PS PAN and SCAN) - Choose this setting if
you want to see the movie fill the entire screen of your TV. This
might mean that parts of the picture (the left and right edges)
won't be seen.
Most discs produced in a WIDESCREEN format can't be cropped
in this fashion.
4 X 3 Letterbox (4:3 LB LETTER BOX) - Choose this setting if
you want to see movies in their original aspect ratio (width-to-
height ratio). You'll see the entire frame of the movie, but it will
take up a smaller portion of the screen vertically. The movie wilt
appear with black bars at the top and bottom of the screen, but you
will see everything to the left & right of the center as in a movie
theater.
16 X 9 Widesereen (16:9) - Choose this setting if your DVD
Player is connected to a WIDESCREEN TV. If you choose this
setting and you don't have a widescreen TV, the images on the
screen may appear distorted due to vertical compression (faces
may seem long and thin).
If you play a disc recorded in 4 X 3 format on a widescreen TV, the
left and right side of the screen will appear black. Press SETUP
button to change to 4:3 ratio or match the type of TV you have.
NOTE: For 16:9 Widesereen TV TYPE, you need to adjust both
the LCD mode and the TV TYPE to 16:9 (see page 20 for Setting
the LCD MODE).
Default - Resetting the functions to factory defaults
In case you fiddled around with your set's controls
and you cannot return the set to its normal operation;
you can reset the major options on this set.
NOTE: If you set "DEFAULT", all items in the setup
menu will be reset to default setting.
-21 IB-PDV709-WM-E-061006
LANGUAGE SETUP (On Screen Display, AUDIO, SUBTITLE & MENU)
These items allow you to preset the OSD language (OSD
= On Screen Display), audio language, subtitle language,
and menu language that will always be used for every
disc on this player (if the language selected is available).
NOTE 1: If the language selected is not available on
the disc, the original language designated
by each disc will be selected.
NOTE 2: You can change the AUDIO or SUBTITLE
language easily by pressing the AUDIO or
SUBTITLE button (refer to page 11).
AUDIO SETUP (DIGITAL OUT) -Only for COAXIALconnectionmode
Your DVD player can be connected to a home theater system with a coaxial digitat audio jack for high
quality sound. Digital audio output allows you to select SPDIF/RAW or SPDIF/PCM digital signal.
A. SPDIF/RAW
The coaxiaI output is connected to a receiver that
accepts Dolby Digital or other signals. It works for
most of the coaxiaI connections.
B. SPDIF/PCM
The coaxial output is connected to a receiver that
accepts PCM SIGNALS.
VIDEO SETUP
These settings allow you to set the video signaI
Brightness, Contrast, Hue, and Saturation.
BRIGHTNESS - The brightness of the video signal
(how light the picture is).
CONTRAST - The contrast of the video signal (the
dark portions of pictures).
HUE - The hue of the video signal (the color of the
pictures).
SATURATION - The saturation of the video signaI
(the vividness of the color).
All above can be adjusted to your tastes.
SPEAKER SETUP (DOWNMIX)
Whether you use the DVD player standalone, connect
to a TV or a home theater with the supplied A/V cables,
you can select the audio output by entering SPEAKER
SETUP and setting the DOWNMIX.
-LT/RT
LT/RT stands for teft and right soundtrack. Select this item when the disc supports Pro Logic
Dolby Stereo. You have the opportunity to hear a program's soundtrack in the most accurate
and realistic presentation possible.
- STEREO
For 5-channeI output, the left and right track signals are output simultaneously. For your home
theater, set the menu to stereo.
--22-- IB-PDV709-WM-E-061006
Safety
•As the laser beam used in the DVD player
may be harmful to the eyes, do not attempt
to disassemble the cabinet. Refer servicing
to qualified personnel only (it is perfectly
safe if you don't unscrew and open the
cabinet).
• Should any solid object or liquid fail into
the player, unplug the player, and have it
checked by qualified personnel before
operating it any further.
Placement of Your DVD Player
• Do not leave the player in a location near a
heat source, or in a place subject to direct
sunlight, excessive dust or mechanicaI
shock.
• Do not place the player on an incline or
unstable place, it may fatt and break.
• Do not place anything within 2 inches of
the sides or back of the cabinet. The
ventilation holes must not be covered for
the player to operate properly and to prolong
the Iife of its components.
• Don't place this DVD player on lacquer
finished furniture without a cloth, wood or
glass protector in between.
• Exposure to extreme hot or cold temperatures
may cause damage to the player or cause
it to malfunction. Do not expose the player
to direct sunlight continuously or leave it in
a vehicle with the doors and windows
closed. The case may become deformed
or discolored or the player may malfunction.
Cleaning the Cabinet
• Clean the cabinet, panel and controls with
a soft cloth slightly moistened with a very
mild detergent solution or a plain damp
cloth. Do not use any type of abrasive pad,
scouring powder, or solvent, such as
alcohol or benzine.
• Never touch the lens with your fingers, if
the tens gets dirty, it will not play. Clean the
disc before use.
Operation
• If moving from a cold environment to a warm
environment, let the player's temperature
stabilize before operation. Moisture may
condense on the tens inside. Remove the
disc and wait about an hour for the moisture
to evaporate.
• If the player has not been used for a long
time, turn the set to ON to warm it up for a
few minutes before inserting a disc.
Handling Discs
• Do not touch the playback side of the disc.
Every fingerprint can cause playback
problems. Do not scratch the disk.
• Do not store the Discs in a place subject
to direct sunlight or near heat sources.
Cleaning Discs
• Before playing, make sure the disc is
clean. If not, clean the disc with a cleaning
cloth. Wipe the disc in a straight motion
from the center out.
• Do not use solvents such as benzine,
thinner, commercially available cleaners or
anti-static spray intended for vinyl LPs.
• If the disc is scratched, it will not play.
Sometimes a scratched disc can be
repaired with a disc polishing machine
available in many stores.
--23-- IB-PDV709-WM-E-061006
t-
Symptom Remedy
No power.
1.The battery is depleted, please recharge the battery or use
the AC adaptor or car adaptor, make sure the AC outlet has power.
2.The fuse in the car adaptor is blown. To change the fuse,
unscrew the tip, replace only with same 3A 250V fuse.
3.The POWER switch is at the OFF position, please slide it to ON.
Battery is fully charged The battery protective circuit may have shut down the battery
but does not work. for safety. To reactivate the battery, charge it for a while.
Battery drains too fast The set continues to be on even in stop mode. If you plan on
in stop mode. leaving the disc stopped for a longer time, turn the set's power
off to conserve battery power or use the AC adaptor.
• Play fails to start even
when PLAY is pressed.
• Play starts but then
stops immediately.
No image on the LCD
screen.
No picture on your
external TV's screen.
The picture is distorted.
1.The disc may be damaged or scratched.
2.This player cannot play a DVD disc other than region 1 standard.
3.The disc may be dirty and may require cleaning.
4. Ensure that the disc is installed with the label side up (facing you).
5. If your disc is rented, it may be scratched or damaged from a
previous renter. Return it or polish it.
6. Condensation may have formed on your disc. Wait about 1
hour to allow the player to dry out.
The player's LCD may be turned off (as when you are using the
external TV).
1. Press the little button marked SCREEN OFF #12 on page 4.
2. Press and hold the SCREEN ON/OFF button on the remote.
1. Ensure that the equipment is connected properly. Double
check all cables and AC power.
2. Select the proper video channel on your TV set, VIDEO 1,2, 3, etc.
3. Check if the proper AV input is selected on your TV set video
inputs (some TV sets have 3 or 4 different inputs).
4. Make sure both the TV and DVD player are on.
1. Picture is distorted during rapid advance or rapid reverse. The
picture may be somewhat distorted occasionally, this is normal.
2. Did you connect your DVD player to your VCR? Please
connect the player directly to your TV and disconnect the VCR.
This player has Macrovision copy protection, this will distort
pictures when used with VCRs.
Some lines appear on
the screen during the Please turn the unit off and turn it on again after the vehicle is
startup of the vehicle, running.
The picture seems
squeezed or stretched.
The LCD mode and TV type you are in may be wrong for this
movie, try changing the LCD and TV type setting for standard
or widescreen. See pages 20 & 21.
--24-- IB-PDV709-WM-E-061006
Symptom Remedy
No sound from your TV or
speakers.
There is no function or less
_ function when you adjustthe
•_ color or the brightness of
the LCD screen using the
cSCREEN ON/OFF and the
t_ left or right direction buttons.
The REMOTE CONTROL
unit does not work.
No rapid advance or
rapid reverse play.
Cabinet vibrates or hums.
A specific disc does not
play.
The player's controls
don't work or the player
cannot work properly.
1. Press AUDIO button several times. The disc may have been
set to DTS output or a blank audio channel on multiple
language, please select AC-3 output or reset to the main
language (refer to page 11).
2. Adjust the DVD player's volume.
3. Make sure the AUDIO output connection and setting are
correct. See details on pages 17,18 and 22.
4. Ensure that the equipment is connected properly.
5. Ensure that the input setting for the TV and stereo system
are correct.
6. Adjust the volume setting on your TV's remote.
7. Make sure the headphones are detached from the DVD player.
8. The movie is paused, press play.
9. The movie is in search or fast play or other speed related play.
Audio is heard only during normal play.
The disc you used is a copied one, please replace it with a
fresh original disc.
1. Check that the remote's batteries are installed correctly.
2. The remote's batteries are weak or depleted, replace them
with new ones (refer to page 8).
3. Use the remote control at a distance of less than 20 feet
(6m) from the DVD player.
4. Remove any obstacles between the remote control and
remote control sensor, also make sure the lens on the
remote control is not dirty.
Some discs may have sections which prohibit rapid advance
(or rapid reverse), especially on opening screens or during FBI
warnings.
This is normal for high speed reading of DVD discs.
1.The disc may be dirty, try cleaning the disc.
2. Make sure the disc is not upside down.
3. The region code is not 1, the disc cannot be used.
4. Disc may not be industry standard or it may be an illegal
copy. Only use legally sold movies not pirated copies.
Set needs to be reset.
Reset the DVD player by removing the battery pack and
disconnecting the AC adaptor for 1 minute. Replace the battery
pack and AC adaptor to resume normal use. (The player may
not be operating properly due to lightning, static electricity,
damaged or wrong discs, or some other external factors).
-25 IB-PDV709-WM-E-061006
Symptom Remedy
No sound during fast
forward or other speed This is normal. Normal sound only happens during normal play.
functions.
Cannot change a menu
item. Try changing this item with the DVD door open (not during play).
The LCD picture is not
16:9 widescreen even
you have set the TV
TYPE to 16:9.
You need to adjust both the LCD mode and the TV type mode to
16:9 (see pages 20 and 21).
Audio soundtrack and/ If the audio soundtrack and /or subtitle language does not exist
or subtitle language is on the disc, the tanguage selected at the initial setting wiii not be
not at the initial settings, heard/seen. Try setting it up again, see Page 22.
No subtitles. Subtitles appear only on discs which contain them. If subtitles
don't show, press the SUBTITLE button to display the subtitles.
Alternative audio Some discs only have one language available. On some discs, the
soundtrack (or subtitle) alternate language cannot be selected by operating the AUDIO or
language does not show. SUBTITLE buttons, try selecting it from the DVD menu if one is
available.
QAngle cannot be This function relies on the DVD disc. Only scenes recorded at
t_ changed, several angles can be viewed. Please refer to your DVD cover.
If a button is pressed too fast over and over, the signals may jam
Picture is frozen, the circuits inside. To restore to normal, press the STOP button
and unplug the set from the AC outlet. Also remove the battery.
Screen saver appears Turn off screen saver by pressing any button on the remote
on TV screen, control or on the set.
Cannot copy discs to You can't copy most commercial movie discs due to copyright
VHS video tapes, protection built into the disc and player.
Display shows numbers Press the DISPLAY button several times untiI the numbers
on top of screen, display disappears.
Foreign language is Press the AUDIO button until your preferred language is heard.
heard on the disc.
Foreign language is Reset the default language to your preferred language by pressing
seen in menus, the SUBTITLE button.
-26 IB-PDV709-WM-E-061006
TITLE
The longest sections of a picture or a music
piece on a DVD, or a movie, etc.. Each title is
assigned a title number enabling you to locate
the title you want.
CHAPTER
Sections of a picture or a music piece on a
DVD that are smaller than titles. A title is
composed of several chapters. Each chapter
is assigned a chapter number enabling you to
locate the chapter you want.
JPEG
JPEG is short for the "Joint Photographic Ex-
perts Group", a group of experts nominated
to produce standards for continuous tone im-
age coding. In other words, your DVD player
can view digital picture CDs or CDs you made
on your computer with file names that end in
the ".JPG" format. This set will not play pic-
tures encoded in formats other than JPG.
VIDEO INPUT
This is a jack which accepts the picture portion
of a signal. In order to use this DVD player,
your TV set must have an S-Video (better) or
video input (standard) jack.
S-VIDEO CABLE
This cable can connect to your S-Video input
of your TV. It allows for sharper pictures for
TV sets with this jack.
VIDEO CABLE
This is a wire with plugs on each end which is
used to transfer the picture information into
your TV set.
NTSC
National TV Systems Committee for TV
broadcasts: a video standard used in the USA
and Canada.
JACK
This is another term for socket.
ABOUT DVD REGION
MANAGEMENT
The DVD inventors and motion
picture makers have decided to
break up the world's DVDs into
regions so that one country's
DVDs should not be able to play in another
country.
This is a legal issue and that is why your
DVD player is restricted to play only region 1
DVDs.
--27-- IB-PDV709-WM-E-061006
General Description
TFT LCD screen size:
Power source:
Power consumption:
Signal system:
Video output level:
Audio output level:
Dimensions (Approx.):
9"
AC adaptor: 100 - 240V, 50/60Hz, DC 9V, 2A output (included)
Car adaptor: 12V input, 12V, 2A output (included), fuse 3A, 250V
17 Watts [normal household current] (approx. 3W when the set is in
the standby mode).
NTSC TV system
1.0 Vp-p
1 vrms (1 kHz, 0dB)
Length: 259 mm 10 3/16"
Width: 181 mm 7 1/8"
Height: 50 mm 1 15/16"
Weight: 1.35 kg 31bs
Audio Signal Output Characteristics:
DVD (linear audio):
(1) Frequency response:
4Hz-22kHz (48 kHz sampling)
4Hz-44kHz (96 kHz sampling)
(2) S/N ratio: 100dB
(3) Dynamic range: 90 dB
(4) Wow and flutter: below measurable level
CO audio:
(1) Frequency response: 20 Hz - 20 kHz
(2) S/N ratio: 65dB
(3) Dynamic range: 90 dB
(4) Wow and flutter: below measurable level
Pickup: Wave length: 650nm~660nm
Laser power: Class 1
We reserve the right to make design and specification changes for product improvement.
The descriptions and characteristics given in this document are given as a general indication
and not as a guarantee. In order to provide the highest quality product possible, we reserve
the right to make any improvement or modification without prior notice. The English version
serves as the final reference on all product and operation details should any discrepancies
arise in other languages.
PROTECT YOUR FINE FURNITURE!
WE RECOMMEND A PROTECTIVE MATERIAL BE PLACED UNDER THE SET WHEN PLACING
IT ON SURFACE WITH A NATURAL OR LACQUER FINISH.
-28 IB-PDV709-WM-E-061006
LIMITED WARRANTY
We warrant this product to be free from defects in materiat and workmanship under normat
use for a period of 1 year after purchase, and we will repair it free of charge or replace it at no
charge, should it become defective under this warranty, providing you submit proof of purchase
(sales slip) with the set.
During the initial 1 year period after original purchase, we will service the set that is returned
to LENOXX ELECTRONICS CORR, prepaid, at no charge. After the initial 1 year period expires,
we will exchange, at no charge, any part that is defective, but will charge for the cost of labor,
return postage paid by Lenoxx.
This warranty does not apply to any product which has been subject to misuse, neglect or
accident. This warranty does not cover a broken cord or cabinet. UNDER NO CIRCUMSTANCES
WILL LENOXX ELECTRONICS CORR BE LIABLE FOR ANY INCIDENTAL OR CONSEQUEN-
TIAL DAMAGES. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state. The following charges apply to repairs beyond the warranty period: $ 30.00.
Be sure to pack carefully and return postage paid insured together with your money
order (personal checks will not be accepted) and sales receipt to:
LENOXX ELECTRONICS CORR, 38 BRUNSWICK AVENUE, EDISON, N.J. 08817, USA
For Customer Service
Dial: 1-800-315-5885
(MONDAY -THURSDAY 8:00 AM -5:00 PM, FRIDAY 8:00 AM -1:30 PM EST)
or Visit Our Website: http://www.lenoxx.com
or Email: evergo@att.net
© 2006 LENOXX ELECTRONICS CORP.
35 BRUNSWICK AVENUE
EDISON, N.J. 08817, USA
MADE & PRINTED IN CHINA
IB-PDV709-WM-E-061006
--29--

Navigation menu