DVS Korea VXM2300 DVD Player with FM Transmitter User Manual Users manual 1

Download:
Mirror Download [FCC.gov]
Document ID	385736
Application ID	M7zhyriM/nex9M8vkVA92g==
Document Description	Users manual 1
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	220.33kB (2754170 bits)
Date Submitted	2003-12-31 00:00:00
Date Available	2003-12-31 00:00:00
Creation Date	2003-12-31 11:52:55
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2003-12-31 11:53:16
Document Title	Users manual 1

PLAYBACK
Precaution
IMPORTANT
The lighting flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of unisulated
dangerous voltage within the product's
enclosure that may be of sufficient
magnitude to constitute a risk of electric
shock to persons.
CAUTION: TO PREVENT THE RISK OF
ELECTRIC SHOCK DO NOT REMOVE
COVER (OR BACK). NO USER
SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE
PERSONNEL.
Note : This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful intrference in a
residential instailation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turing the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
WARNING
CAUTION
This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit to
other equipment. To present electromagnetic interference
with electric appliances such as radios and televisions,
use shielded cables and connectors for connections.
CAUTION
Use of controls or adjustments or performance of
procedures other than those wpecified here in may
result in hazardous radiation exposure.
The use of Optical instruments with this product will
increase eye hazard
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
CAUTION
This product contains a laser diode of higher class than 1. To ensure continued
safety, do not remove any covers or attempt Refer all servicing to qualified
personnel.
VORSICHT
The following caution appears on rear of the unit.
ADVARSEL
VARNING
VARO!
CAUTION
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance
(servicing instructions in the literature
accompanying the appliance.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID
DIRECT EXPOSURE TO BEAM (WARNING LOCATION: INSIDE ON
LASER COVERSHIELD)
: LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM.
: SICHTBARE UND UNSICHTBARE
LASERSTRAHLUNG. WENN
ABDECKUNG GE FFNET. NICHT
DEM STRAHL AUSETZEN.
: LASERSTRÃLING VED ÃBNING UNDGÃ
UDSÆ TTEL SE FOR STRÃLING.
: LASERSTRÃL NING NÃR DENNA DEL ÃR
ÖPPNAD BETRAKTA EJ STRÃLEN.
: AVATTAESSA ALTISTUT LASERSÃTBL YLLE
ÃLÃ KATSO SÃTEESEN
This product is in conformity with the EMC directive
and low-voltage directive.
This product incorporates copyright protection technology that is protected by method claims of certain U. S .Patents and other intellectual property
rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be Authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision corporation. Reverse engineering
or disassembly is prohibited.
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
"DTS" and "DTS Digital Surround" are trademarks of Digital Theater Systems, Inc.
Precaution
Important Safety Instruction
- READ INSTRUCTIONS - All the safety and
operating instructions should be read before the
product is operated.
- RETAIN INSTRUCTIONS - The safety and
operating instructions should be retained for future
reference.
- HEED WARNINGS - All warnings on the product
and in the operating instructions should be
adhered to.
- FOLLOW INSTRUCTIONS - All operating and
use instructions should be followed.
- CLEANING - Unplug this product from the wall
outlet before cleaning. The product should be
cleaned only with a polishing cloth or a soft dry
cloth. Never clean with furniture wax, benzene
secticides or other volatile liquids since they may
corrode the cabinet.
- ATTACHMENTS - Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
- WATER AND MOISTURE - Do not use this
product near water - for example, near a bathtub,
wash bowl, kitchen sink, or laundry tub; in a wet
basement; or near a swimming pool; and the like.
- ACCESSORIES - Do not place this product on
an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with
the product. Any mounting of the product should
follow the manufacturer's instructions, and should
use a mounting accessory recommended by the
manufacturer.
- CART - A product and cart
combination should be moved
with care. Quick stops,
excessive force, and uneven
surfaces may cause the
product and cart combination to
overturn.
- VENTILATION - Slots and openings in the
cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it
from overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
- POWER SOURCES - This product should be
operated only from the type of power source
indicated on the marking label. If you are not sure
of the type of power supply to your home, consult
your product dealer or local power company.
- LOCATION - he appliance should be installed in
a stable location.
- NONUSE PERIODS - The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
- GROUNDING OR POLARIZATION
- If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
- If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding
type power outlet. This is a safety feature. If you
are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding type plug.
- POWER-CORD PROTECTION - Power-supply
cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and the point
where they exit from the product.
- OUTDOOR ANTENNA GROUNDING - If an
outside antenna or cable system is connected to
the product, be sure the antenna or cable system
is grounded so as to provide some protection
against voltage surges and built-up static charges.
Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode. See
Figure A.
- LIGHTNING - For added protection for this
product during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage
to the product due to lightning and power-line
surges.
- POWER LINES - An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
- OVERLOADING - Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
- OBJECT AND LIQUID ENTRY - Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the
product.
- SERVICING - Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
- DAMAGE REQUIRING SERVICE - Unplug this
product from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
- When the power-supply cord or plug is damaged.
- If liquid has been spilled, or objects have fallen
into the product.
- If the product has been exposed to rain or water.
- If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
- If the product has been dropped or damaged in
any way.
- When the product exhibits a distinct change in
performance - this indicates a need for service.
- REPLACEMENT PARTS - When replacement
parts are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
- SAFETY CHECK - Upon completion of any
service or repairs to this product, ask the service
technician to perform safety checks to determine
that the product is in proper operating condition.
- WALL OR CEILING MOUNTING - The product
should not be mounted to a wall or ceiling.
- HEAT - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that
produce heat.
Watch out for using Mobile DVD Player while driving
(Watching TV while driving are prohibited)
Warning
Important Safety Instruction
Table of contents
Before You Start
Caution on Handling Discs
What's in the box
Preparing the Remote Control
Using the remote control
Compatible Discs
Advanced Operation
Control & Display
Front Panel
Display
Rear Panel
Remote Control Unit
11
12
13
14
Getting Started
Power Connection
Connecting to a TV
Connecting to a Car Audio System
Connecting External A/V Input
Connecting to a Dolby Digital
Connecting to Car Radio System
Connecting to
Component Video Input
Table of contents
Basic Operations
General Setup
Audio Setup
Video Setup
Preference Setup
Password Setup
Additional Information
22
Specifications
Troubleshooting
23
25
26
27
27
28
28
29
29
30
31
31
31
31
32
33
Using the Setup Menu
16
17
18
19
20
21
Basic Operation
Playing DVD Video disc
Playing MP3 discs
Playing Kodak CD and
JPEG file play
Fast Forward/Backward
Skip Forward/Backward
Slow Forward/Backward
Frame by Frame Playback
OSD (On-Screen Display)
Selecting Audio Languages
Selecting Subtitles
Repeating a Title, Chapter, Track
Repeating a specific section (A-B)
Program Play
Zooming a Picture
Switching the Camera Angle
Direct Search (GO TO)
36
37
39
41
42
44
45
46
Before You Start
Cautions on handling discs
Disc
Only the discs including the mark shown on page 7 can be played on the DVD player.
Note, however, that discs with special shapes(heart-shaped discs, hexagonal discs,
irregular discs, etc.) cannot be played on the DVD player. Do not attempt to play such
discs, as they may damage the player.
Holding Discs
Avoid touching the surface of discs when loading and unloading them.
Be careful not to get fingerprints on the signal
surface (the side which shines in rainbow colors.)
Cleaning Discs
- Fingerprints or dirt on the may lower sound and picture quality or cause breaks in
playback. Wipe off fingerprints or dirt
- Use a commercially available disc cleaning set or a soft cloth to wipe off fingerprints or dirt.
Wipe gently from the middle outwards
Do not wipe with a circular motion
- Do not use record spray or antistatic. Also do not use volatile chemicals such as
benzene or thinner
N ote
Before you Start
Before You Start
Cautions on handling discs
- Do not get fingerprints, grease or dirt on discs.
- Be especially careful not to scratch discs when removing them from their cases.
- Do not bend discs.
- Do not heat discs.
- Do not enlarge the center hole.
- Do not write on the labeled (printed) side with a ball-point pen or pencil.
- Water droplets may from on the surface if the disc is moved suddenly from a cold place
to a warm one. Do not use hairdryer, etc., to dry the disc.
Caution on Loading Discs
- Only load one disc at a time. Loading one disc on top of another may result in damage
or scratch the discs.
- Do not load cracked or warped discs or discs that have been fixed with adhesive, etc.
- Do not use discs on which the adhesive part of cellophane tape or glue used to attach
the label is exposed, or discs with traces of tape or labels that have been peeled, or
discs with traces of tape or label that have been peeled off. Such discs may get stuck
inside the player, resulting in damage
Before You Start
Before You Start
What's in the box
Thank you for buying this product. Please confirm that the following accessories are in
the box when you open it.
Accessories
Warning : DC cable must be connected to ACC power line
Preparing the Remote Control
Insert the batteries into the remote controler so you can use it to operate the DVD player
1 Open the battery cover.
batteries. (AAA size)
2 Insert
- Make sure to match the + and - on the batteries
to the marks inside the battery compartment.
3 Close the cover.
Before You Start
Before You Start
Warning
Improper use of batteries may cause battery leakage and corrosion.
To operate the remote control correctly, follow the instructions.
Don't insert the batteries into the remote control in the wrong direction.
Don't charge, heat, open, or short-circuit the batteries.
Don't throw the batteries into fire.
Don't leave dead or exhausted batteries in the remote control.
Don't use different types of batteries together, or mix old and new batteries.
If you do not use the remote control for a long period of time, remove the batteries to
avoid possible damage from battery corrosion.
- If the remote control does not function correctly or if the operating range becomes
reduced, replace all batteries with new ones.
- If battery leakage occurs, wipe the battery liquid from the battery compartment, then
insert new batteries.
- The batteries should last about one year with normal use.
Using the remote control
The effective operating range of the
remote control is 5~7m, and 30 left and
right degrees from the IR receiver.
N ote
Before You Start
Direct the remote control at the remote sensor of the DVD player.
Don't drop or give the remote control a shock.
Don't leave the remote control near extremely hot or humid place.
Don't spill water or put anything wet on the remote control.
Don't open the remote control.
Before You Start
Compatible Discs
The types of discs listed on the table below can be used on the DVD player. The marks are
indicated on the disc labels or jackets.
Digital Video discs
- Single sided or double sided discs.
- Single layer or dual layer discs.
- Dolby Digital, DTS, MPEG or Linear PCM digital audio.
- MPEG-2 digital video Discs are generally divided into one or more title.
Titles may be further subdivided into chapters.
DVD-R, DVD-RW, DVD+R, DVD+RW
DVD+R
DVD+ReWritable
- This unit can play DVD-R/ RW/ +R/ +RW discs recorded as DVD video format.
DVD-R, DVD-RW, DVD+R, DVD+RW
- 12cm or 8cm discs.
- Linear PCM digital audio
- CD-Audio, CD-R and CD-RW formatted CDs are divided into tracks.
(This unit can play CD-R and CD-RW discs recorded on CD Audio or
Video CD format, or with MP3 audio files)
Video CD
Picture CD
- 12cm or 8cm discs.
- MPEG-1 digital audio.
- MPEG-1 digital video.
- Video CDs are divided into tracks.
- Picture 12cm discs
Before You Start
Before You Start
MP3 compatibility information
- The CD-ROM must be ISO 9660 compatible.
- Mono or stereo MPEG-1 Audio Layer 3 format, 32 or 44.1 or 48kHz fixed bit-rate.
Incompatible files will not play.
- Compatible with variable bit-rate (VBR) files.
- This player is compatible with multi-session discs.
- Audio encoded at 128Kbps should sound close to regular audio CD quality. Although
this player will play 48K to 320k bit-rate.
- MP3 tracks, the sound quality becomes. Noticeably worse at lower bit rates.
Region code
Your DVD player is designed and manufactured to respond to the region management
information that is recorded on a DVD disc.
All DVD Video discs carry a region mark on the case somewhere that indicates which
region of the world the disc is compatible with. Your DVD player also has a region mark,
which you can find on the rear panel. Discs from incompatible regions will not play in
this player. Discs marked ALL will play in any player.
10
Before You Start
Control & Display
Front Panel Control
POWER
Turns the power on/off.
STEREO JACK FOR CAR
PACK / AV IN
Plug in car pack jack for stereo audio
output.
Plug in video and stereo audio input.
EJECT
Press EJECT to eject the discs.
DISPLAY WINDOW
Display information about the current
state of the player and the disc.
(See next page.)
DISC IN / OUT HOLE
Discs are inserted and ejected here.
PLAY/PAUSE
Starts disc play and pause
MUTE
Turns the audio outputs on/off.
SKIP Forward/Reverse
Plays skip forward/reverse.
REMOTE SENSOR
Receives a IR signal from the
remote control
Control & Display
11
Control & Display
Display
DVD/SVCD/MP3/PBC
Illuminates the type of the disc loaded.
TIME
Indicates time information and displays
information about operation such as PLAY,
STOP, LOAD, NO DISC, etc.
ROTATION
Rotates when the disc is spinning.
PLAY/PAUSE
Indicates the current operation mode.
DTS
Indicates that the audio type of the disc
under play is DTS.
Repeat/ALL
Indicates the current repeat play mode.
12
Control & Display
Dolby
Indicates that the audio format of the disc
under play is Dolby digital.
Control & Display
Rear Panel
DC INPUT
EXTERNAL REMOTE
CONNECTOR
Use the External Remote Control to
Connect the Irmodule
10
(Wireless FM Transmitter model)
VIDEO OUT
AUDIO OUT (L/R)
Connect to the Audio input jacks of your
TV, audio/video receiver
ANTENNA CONNECTOR
To connect antenna for internal wireless FM
transmitter. It can out DVD player's audio
signal to your car radio system. At this mode
not necessary to connect any wiring for DVD
player's audio signal
DIGITAL AUDIO OUT (Coaxial)
Use a video cable to connect one of
these jacks to the Video input on your TV.
COMPONENT VIDEO OUT
Connect the component video input of TV
system. It can out Y/Pb/Pr or RGB video
output. At this video mode progressive
scan is also possible.
Use coaxial digital cable to connect to
a compatible Dolby Digital receiver
VGA CONNECTOR (VGA option)
Connect the VGA monitor to this connector.
In VGA mode you can see progressive
scan video.
DC INPUT
Use the cigar cable to connect the
cigar jack.
Use the AC adapter to connect the AC
Power. (optional)
11
10
Use the DC cable to connect the
only 12V battery
S-VIDEO OUT
11
ANTENNA CABLE
(Wired FM Transmitter model)
To connect car radio's antenna and car radio
antenna input for use wired FM transmitter.
It can switching car antenna signal during
DVD player's operation, so radio noise will
decrease.
Use the S-VIDEO cable to connect this
jack to the S-VIDEO.
Control & Display
13
Control & Display
Remote Control
OPEN / CLOSE (
Ejects the disc
SETUP (
Use to set various functions according to
individual preference
POWER (
Turns on or off the DVD player.
NUMBER
Press the number button. Use the +10 button to
input numbers of 10 or over.
TITLE (
Use the TITLE button to display the title screen
included on DVD discs.
MENU (
Use the MENU button to display the menu screen
ncluded on a DVD discs.
RETURN (
Use the RETURN button to return to the previous
menu screen.
MUTE (
Turns on/off audio outputs.
ARROW BUTTONS(
Use to move to the desired menu.
10
CL(CLEAR) (
Press this to clear numbers that you have input.
11
ENTER (
Selects menu items and begins disc play.
12
STOP (
Stop video playback in DVD video and video
CD mode.
13
PLAY/PAUSE (
Play or pause video and audio media.
14
Control & Display
Control & Display
14
STEP (
22
Play one frame at a time during
pause.
15
SKIP (
23
Select previous track, title, chapter,
and index or beginning of current track,
title, chapter, index.
Select next track, title, chapter, index.
16
SEARCH (
SLOW MOTION (
GOTO (
Used to go to the chapter, track or song
of the disc you want
19
SUB-T (
Changes the subtitle language to another
available language or sets OFF (if the disc
supports multiple subtitle languages).
20
AUDIO (
ANGLE (
24
PROGRAM (
Programs the desired titles and tracks of
DVD and CD-DA.
25
View with a different frame angle. (This
button is available only on multiple angle
DVDs.)
ZOOM (
Press this to enlarge the image.
26
TV MODE (
Changes the NTSC/PAL/MULTI /VGA
(option) mode.
27
PLAY MODE (
Repeats part or all of a chapter, title,
track, or an entire disc
28
PBC (
Turn on and off the PBC function in
video CD mode
29
3D (
Virtual 3D Sound Control
30
AUX (
Changes the DVD mode and external
A/V input mode
Changes the audio language to another
available language (if the disc supports
multiple audio languages).
21
A-B (
Repeating a specific section.
Press for slow backward scanning during
pause.
Press for slow forward scanning during
pause
18
Press for fast backward scanning during
playback.
Press for fast forward scanning during
playback.
17
DISPLAY (
Shows the information about time,
play state.
31
AUDIO ONLY (
Turns off the screen for audio only mode
32
DIMMER (
Set the display brightness
(HALF, FULL, OFF).
33
VOL+/VOL - (
Increases and decreases the volume.
Control & Display
15
Getting Started
Power Connections
using the Cigar cable
1 When
- Make sure that input voltage is 12-24V
- Connect to DC INPUT using the include cigar cable.
To Cigar Jack
connecting the DC power cable.
2 When
- DC cable - This is installation should be made by a qualified service person and
should confirm to all local codes.
- Connect the terminal of red cable to DC 12-24V, and the terminal of black cable to
ground.
using the DVD player at home
3 When
- Connect to DC INPUT using the AC adapter.(optional)
N ote
16
Getting Started
- When you connect the DVD player to your TV, be sure to turn off the power and unplug
both units from the wall outlet before making any connections.
- Connect the DVD player to your TV directly. If you connect the DVD player to a VCR,
the playback picture will be distorted because DVD video discs are copy protected.
- Fuse Replacement Marking - Replace only with same type (3 A, 250 V) and
ratings of fuse. For continued protection against fire hazard.
Getting Started
Connecting to a TV
L (White)
R (Red)
Audio Output
S-Video Output
Video Output (Yellow)
Audio Input
Video Input
S-Video Input
Connect the DVD player to your TV.
the AUDIO CABLES between the AUDIO OUT L and R jacks on the back of
1 VConnect
your DVD player and the corresponding AUDIO INPUT jacks on your TV.
the VIDEO CABLE between the VIDEO OUT jack on the back of your DVD player
2 Connect
and the corresponding VIDEO INPUT jack on your TV. (if you have S-VIDEO jack on your
TV, connect to the S-VIDEO jack on your DVD player. You will watch a better picture.
Warning
- Do not set the Digital Audio Output of this DVD player to "SPDIF/PCM" unless you are
connecting the DIGITAL AUDIO jack of this DVD player to an AV decoder that has
Dolby Digital decoding function. High volume sound may damage your hearing as well
as speakers.
Getting Started
17
Getting Started
Connecting to a Car Audio System
L (White)
R (Red)
Audio Output
Video Output (Yellow)
TV
Audio Input
Video Input
Connecting to a Car Audio System.
the AUDIO CABLES between the AUDIO OUT L and R jacks on the back of
1 Connect
your DVD player and the corresponding AUDIO INPUT jacks on your audio system.
the VIDEO CABLE between the VIDEO OUT jack on the back of your DVD
2 Connect
player and the corresponding VIDEO INPUT jack on your TV.
N ote
18
Getting Started
- When you connect the DVD player to other equipment, be sure to turn off the power and
unplug all of the equipment from the power source before making any connections.
- If you place the DVD player near a turner or radio, the radio broadcast sound might be
distorted. In this case, move the DVD player away from the tuner and radio.
- Be sure to adjust the receiver's volume to a moderate listening level. Otherwise, the
speakers may be damaged by a sudden high volume sound.
- Turn off the receiver before you connect or disconnect the DVD player's power cord.
If you leave the receiver power on the speakers may be damaged.
Getting Started
Connecting External A/V Input
External A/V Input Cable
Audio Input
External AV player
Video Input
Audio Output
Video Output
Game machine
MD player
CD player...
Connecting External A/V Input
function can connects your another A/V (Game machine, MD...) to monitor and
1 This
car audio system. Only connect A/V input cable to your DVD player's AUDIO OUT/AV
IN socket than DVD player changes to external A/V input mode. If A/V has only audio
signals cannot changes to external A/V input mode.
You can change the mode by remote controller's AUX key.
Caution : This function cannot operate in VGA mode (VGA option)
Getting Started
19
Getting Started
Connecting to a Dolby Digital System
Coaxial Digital Out
Video Output
Coaxial Cable
S-Video Output
Dolby Digital Decoder
Coaxial Digital In
Center
Speaker
Front
Speaker (L)
Front
Speaker (R)
TV
Rear Speaker
(Left surround)
Sub Woofer
Rear Speaker
(Right surround)
Dolby Digital
Dolby Digital is the surround sound technology used in theaters showing the latest movies,
and is now available to reproduce this realistic effect in the home. You can enjoy motion
picture and live concert DVD video discs with this dynamic realistic sound by connecting
the DVD player to a 6 channel receiver equipped with a Dolby Digital decoder or Dolby
Digital processor.
the COAXIAL DIGITAL OUT (black) jack on the back of your DVD player
1 Connect
to the DIGITAL IN jack fo the Decoder or AV amplifier.
2 2. Page 17-18 for details on video connection to TV
N ote
20
Getting Started
- When you connect the DVD player to other equipment, be sure to turn off the power and
unplug all of the equipment from the wall outlet before making any connections.
- Turn off the receiver before you connect or disconnect the DVD player's power cord.
If you leave the receiver power on, the speakers may be damaged.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Modify Date                     : 2003:12:31 11:53:16-08:00
Create Date                     : 2003:12:31 11:52:55-08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Page Count                      : 20
Mod Date                        : 2003:12:31 11:53:16-08:00
Creation Date                   : 2003:12:31 11:52:55-08:00
Metadata Date                   : 2003:12:31 11:53:16-08:00

EXIF Metadata provided by EXIF.tools