DXG Technology RWD01001 Watch User Manual RCWD01 EN Q1 01 1213

DXG Technology Corp. Watch RCWD01 EN Q1 01 1213

User manual.pdf

PMMODE/SLEEPSETPM12H24HProduct OverviewFCC StatementModications not approved by the party responsible for compliance could void user’s authority to operate the equipment.This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment on and o.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.The user is encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and the receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.RC WatchQuick Start GuideSETSETUPOKBINDINGRFSEL OK STOPSET buttonPHOTO buttonCharging portMODE/SLEEP buttonCharging BatteryWhen the battery power is running low, do the following to charge the battery:1. Open the charging port cover.2. Connect one end of the Pogo cable to the charging port of your watch. 3. Connect the end of the Pogo cable to the USB port of a computer or AC adapter to charge battery. LEFT buttonVIDEO buttonRIGHT buttonClock ModeIn this mode, this watch can be used as a clock, stopwatch, countdown clock, and alarm clock.Set Date and Time1. Press and hold the SET button to enter the setting mode. 2. Press the RIGHT button repeatedly to select the field that you want to adjust. 3. Use the VIDEO or PHOTO button to adjust the value or set time format or the color of the LED clock display. 4. Repeat steps 2-3 to adjust other fields. 5. Press the SET button to save your changes. Stopwatch1. Press the LEFT button repeatedly to switch to Stopwatch mode. 2. Press the VIDEO button to start the timer. 3. To record a lap while the timer is running, press the RIGHT button. It displays the last lap time.• Repeat this step to create a new lap. You can record up to 12 laps.4. To stop the timer, press the VIDEO button. 5. To reset the timer, press the SET button. Countdown Clock1. Press the LEFT button repeatedly to switch to Countdown Clock mode. 2. To start the countdown, press the VIDEO button. 3. To pause the countdown, press the VIDEO button. • To resume, press the VIDEO button again. • To reset the countdown, press the SET button. Setup ModeIn this mode, it allows to pair with a camera, set auto power off, enable/disable sound, and adjust the brightness setting.Pair with Camera1. On your camera, press the Mode button repeatedly to change to SET mode.2. Press the Shutter button to enter SET mode.3. Press the Mode button to highlight MORE. Then press the Shutter button to enter the MORE menu. 4. Press the Mode button to highlight BINDING.5. Press the Shutter button to enter the BINDING submenu. The camera RF antenna is enabled and ready for pairing.6. On your RC watch, press the MODE button to switch to Preview mode. Then press and hold the SET button to enter to SET mode.7. Use the LEFT or RIGHT button to select Pairing and press the VIDEO button to enter Pairing menu. 8. Use the LEFT or RIGHT button to select the preview window that you want to pair with your camera and press the VIDEO button to start pairing.9. When pairing is complete, press the SET button to return to SET mode. Then press the SET button to switch to Preview mode.10. Repeat Step 7~9 to add more cameras. You can pair up to 6 cameras.Alarm Clock1. Press the RIGHT button repeatedly to switch to Alarm Clock mode. 2. To activate an alarm, press the VIDEO button to select ON.To set the countdown time, do the following:a. Press and hold the SET button. Then press the RIGHT button repeatedly to select the field that you want to adjust.b. Use the VIDEO or PHOTO button to adjust the value.c. Press the SET button to confirm.To set the alarm time, do the following:a. Press and hold the SET button. Then press the RIGHT button repeatedly to select the field that you want to adjust.b. Use the VIDEO or PHOTO button to adjust the value.c. Press the SET button to confirm.To unpair or remove the paired camera, do the following:a. In SET mode, use the LEFT or RIGHT button to select Pairing and press the VIDEO button to enter Pairing menu.b. Use the LEFT or RIGHT button to select the assigned preview window that you want to unpair.c. Press the VIDEO button to confirm.Set Auto Power Off1. Press the MODE button to switch to Preview mode. Then press and hold the SET button to enter to SET mode.2. Use the LEFT or RIGHT button to select Auto off and press the VIDEO button to enter Auto Power Off menu. 3. Use the LEFT or RIGHT button to select the desired setting and press the VIDEO button to confirm.Enable/Disable Sound1. Press the MODE button to switch to Preview mode. Then press and hold the SET button to enter to SET mode.2. Use the LEFT or RIGHT button to select Sound and press the VIDEO button to enter Sound menu. 3. Use the LEFT or RIGHT button to enable/disable sound and press the VIDEO button to confirm.Adjust Brightness Level1. Press the MODE button to switch to Preview mode. Then press and hold the SET button to enter to SET mode.2. Use the LEFT or RIGHT button to select Bright and press the VIDEO button to enter Brightness menu. 3. Use the LEFT or RIGHT button to select the brightness level and press the VIDEO button to confirm.Number colorTime formatPMONPMPairingOKPairing123456123456PairingAutoOffsecOKBrightOKSoundOKSpecificationsGeneralFunction Remote control Living View Basic time function: Time, Stopwatch ,Timer, Alarm Working Range 3mRF Module 2.4GHzIO Terminals PoGo pin USBStatus OLED 1.29”, 128.96 dotPower Source Polymer Battery 370mAh, 3.7V dcStream Format Motion JPEG 128*96 pixel, 8fpsVideo Aspect 4:3RatioPower Saving Auto Sleeping in 5/10/30/60s/neverCharging Time Approx. 2 hoursBattery Life Living living view continuously: 1.5 hours Time without sleeping: 6 hours Standby time in sleeping mode: up to 6 monthsTroubleshootingProblem Possible Cause SolutionA black screen appears on the screen and all buttons are inactive.The screen appears unusually and all buttons are inactive. The battery is running out.The watch is shutting down.The micro SD card is not inserted.The battery is running out.Connect pogo cable and the battery will start charging after 10 seconds.Connect the end of the Pogo cable to the USB port of a computer. After 10 seconds, the watch will restart.Insert a micro SD card into camera card slot.(Note: If you use internal memory to record video, the live view will disappear when you start recording.) Connect the pogo cable to charge battery.Live View ModeWhen the devices are paired, the live view appears on the screen and you can use this watch as a remote control to record videos or capture photos. 1. Press the MODE button to switch to Preview mode. The live view appears on the screen.2. Do the following:• To record videos:Press the VIDEO button to start recording. Press the VIDEO button again to stop video recording. • To capture photos:Press the PHOTO button. 11(orange) - card full(blue) - recording(gray)- standby (already connected to camera)(black)- disconnectedLive view icon indicatorsVideo button and Photo button in Live view mode RC Watch Video Button Photo ButtonVideoPhotoBurstTime Lapse @ video Time Lapse @ photoSelf Timer LoopingSet up/Wi-Fi…Note: With PIV (Photo In Video) feature, you can take a photo when you are recording a video.VideoVideoVideoStart/Stop Start/StopVideoLooping start/stop VideoPhotoNote: “PIV” is available when camera is recording.PhotoBurstPhotoNote: PIV is available when camera is processing Time Lapse @video.PhotoSelf TimerN/APhoto Action Cam Mode

Navigation menu