DXG Technology RWD01001 Watch User Manual RCWD01 EN Q1 01 1213

DXG Technology Corp. Watch RCWD01 EN Q1 01 1213

User manual.pdf

Download: DXG Technology RWD01001 Watch User Manual RCWD01 EN Q1 01 1213
Mirror Download [FCC.gov]DXG Technology RWD01001 Watch User Manual RCWD01 EN Q1 01 1213
Document ID2139394
Application IDwyweVsJ7Pip5d0dpF2WtPQ==
Document DescriptionUser manual.pdf
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize343.28kB (4291041 bits)
Date Submitted2013-12-11 00:00:00
Date Available2013-12-11 00:00:00
Creation Date2013-12-10 15:30:20
Producing SoftwareAdobe PDF library 8.00
Document Lastmod2013-12-10 18:06:37
Document TitleRCWD01-EN-Q1.01-1213
Document CreatorAdobe Illustrator CS3

Clock Mode
Product Overview
In this mode, this watch can be used as a clock, stopwatch, countdown
clock, and alarm clock.
PHOTO button
SET button
MODE/SLEEP
MODE/SLEEP
button
SET
RC Watch
PM
Charging port
LEFT button
RIGHT button
VIDEO button
Set Date and Time
1. Press and hold the SET button to enter the setting mode.
Time format
Number color
2. Press the RIGHT button repeatedly to
select the field that you want to adjust.
3. Use the VIDEO or PHOTO button to
adjust the value or set time format or the
color of the LED clock display.
PM
12H
24H
5. Press the SET button to save your changes.
Charging Battery
Stopwatch
When the battery power is running low, do the following to charge the
battery:
1. Press the LEFT button repeatedly to switch to
Stopwatch mode.
1. Open the charging port cover.
2. Press the VIDEO button to start the timer.
To set the alarm time, do the following:
a. Press and hold the SET button. Then
press the RIGHT button repeatedly to
select the field that you want to adjust.
b. Use the VIDEO or PHOTO button to
adjust the value.
c. Press the SET button to confirm.
4. To stop the timer, press the VIDEO button.
5. To reset the timer, press the SET button.
Live View Mode
1. Press the MODE button to switch to Preview mode.
Then press and hold the SET button to enter to SET mode.
When the devices are paired, the live view appears on the screen and
you can use this watch as a remote control to record videos or capture
photos.
2. Use the LEFT or RIGHT button to select
Auto off and press the VIDEO button to
enter Auto Power Off menu.
3. Use the LEFT or RIGHT button to select
the desired setting and press the VIDEO
button to confirm.
AutoOff
sec
OK
1. Press the MODE button to switch to Preview mode.
Then press and hold the SET button to enter to SET mode.
3. Use the LEFT or RIGHT button to enable/
disable sound and press the VIDEO button
to confirm.
Sound
OK
Video
(orange) - card full
(blue) - recording
(gray)- standby (already
connected to camera)
(black)- disconnected
• To record videos:
Press the VIDEO button to start recording.
Press the VIDEO button again to stop video
recording.
• To capture photos:
Problem
Photo Button
Photo
Note: “PIV” is available when
camera is recording.
Photo
Video
Photo
Burst
Video
Burst
Time Lapse @ video
Start/Stop
Photo
Note: PIV is available when
camera is processing Time
Lapse @video.
Time Lapse @ photo Start/Stop
Photo
Self Timer
Video
Self Timer
Looping
Looping start/stop
N/A
Set up/Wi-Fi…
Video
Photo
Note: With PIV (Photo In Video) feature, you can take a photo when you
are recording a video.
1. Press the MODE button to switch to Preview mode.
Then press and hold the SET button to enter to SET mode.
3. Use the LEFT or RIGHT button to select the
brightness level and press the VIDEO button
to confirm.
Video Button
2. Do the following:
Press the PHOTO button.
Adjust Brightness Level
2. Use the LEFT or RIGHT button to select
Bright and press the VIDEO button to enter
Brightness menu.
RC Watch
Live view icon indicators
Enable/Disable Sound
2. Use the LEFT or RIGHT button to select
Sound and press the VIDEO button to enter
Sound menu.
1. Press the MODE button to switch to Preview mode. The live view
appears on the screen.
Video
Bright
OK
2. Press the Shutter button to enter SET mode.
A black screen
appears on the
screen and all
buttons are inactive.
The screen appears
unusually and all
buttons are inactive.
5. Press the Shutter button to enter the BINDING submenu. The
camera RF antenna is enabled and ready for pairing.
RF
ON
PM
Pairing
7. Use the LEFT or RIGHT button to
select Pairing and press the VIDEO button
to enter Pairing menu.
OK
10. Repeat Step 7~9 to add more cameras. You can pair up to 6 cameras.
To unpair or remove the paired camera, do the following:
a. In SET mode, use the LEFT or RIGHT
button to select Pairing and press the
VIDEO button to enter Pairing menu.
b. Use the LEFT or RIGHT button to
select the assigned preview window
that you want to unpair.
c. Press the VIDEO button to confirm.
Pairing
PM
Specifications
General
The battery is running
out.
Connect pogo cable
and the battery will
start charging after 10
seconds.
Function
The battery is running
out.
9. When pairing is complete, press the SET
button to return to SET mode. Then press
the SET button to switch to Preview mode.
Pairing
STOP
6. On your RC watch, press the MODE button
to switch to Preview mode.
Then press and hold the SET button to
enter to SET mode.
Solution
The micro SD card is
not inserted.
OK
4. Press the Mode button to highlight BINDING.
Possible Cause
The watch is shutting
down.
SET
SETUP
3. Press the Mode button to highlight MORE. Then press the Shutter
button to enter the MORE menu.
Troubleshooting
Video button and Photo button in Live view mode
Action Cam Mode
1. On your camera, press the Mode button
repeatedly to change to SET mode.
1. Press the RIGHT button repeatedly to switch
to Alarm Clock mode.
3. To record a lap while the timer is running,
press the RIGHT button. It displays the last
lap time.
• Repeat this step to create a new lap. You can
record up to 12 laps.
Set Auto Power Off
Pair with Camera
Alarm Clock
2. To activate an alarm, press the VIDEO button
to select ON.
8. Use the LEFT or RIGHT button to select the
preview window that you want to pair with
your camera and press the VIDEO button
to start pairing.
In this mode, it allows to pair with a camera, set auto power off,
enable/disable sound, and adjust the brightness setting.
SEL BINDING OK
2. Connect one end of the Pogo cable to
the charging port of your watch.
Quick Start Guide
1. Press the LEFT button repeatedly to switch to Countdown Clock
mode.
2. To start the countdown, press the VIDEO
button.
3. To pause the countdown, press the VIDEO
button.
• To resume, press the VIDEO button
again.
• To reset the countdown, press the SET button.
To set the countdown time, do the following:
a. Press and hold the SET button. Then
press the RIGHT button repeatedly to
select the field that you want to adjust.
b. Use the VIDEO or PHOTO button to
adjust the value.
c. Press the SET button to confirm.
4. Repeat steps 2-3 to adjust other fields.
3. Connect the end of
the Pogo cable to
the USB port of
a computer or
AC adapter to
charge battery.
Setup Mode
Countdown Clock
Connect the end of the
Pogo cable to the USB
port of a computer.
After 10 seconds, the
watch will restart.
Insert a micro SD card
into camera card slot.
(Note: If you use
internal memory to
record video, the live
view will disappear
when you start
recording.)
Connect the pogo
cable to charge battery.
Remote control
Living View
Basic time function: Time, Stopwatch ,Timer, Alarm
Working Range 3m
RF Module
2.4GHz
IO Terminals
PoGo pin USB
Status OLED
1.29”, 128.96 dot
Power Source
Polymer Battery 370mAh, 3.7V dc
Stream Format
Motion JPEG 128*96 pixel, 8fps
Video Aspect
Ratio
4:3
Power Saving
Auto Sleeping in 5/10/30/60s/never
Charging Time
Approx. 2 hours
Battery Life
Living living view continuously: 1.5 hours
FCC Statement
Modifications not approved by the party responsible for compliance
could void user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits
for Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio or television reception, which can be determined by turning the
equipment on and off.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate this equipment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Time without sleeping: 6 hours
Standby time in sleeping mode: up to 6 months
The user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Annotate, Fill forms
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Format                          : application/pdf
Title                           : RCWD01-EN-Q1.01-1213
Creator Tool                    : Adobe Illustrator CS3
Create Date                     : 2013:12:10 15:30:20+08:00
Modify Date                     : 2013:12:10 18:06:37+08:00
Metadata Date                   : 2013:12:10 18:06:37+08:00
Thumbnail Width                 : 256
Thumbnail Height                : 148
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 17147 bytes, use -b option to extract)
Document ID                     : uuid:9C00C1536C61E311B2D187AAF28A2D01
Instance ID                     : uuid:428d1082-889d-47d5-8b42-b6d8fd306c08
Derived From Instance ID        : uuid:9B00C1536C61E311B2D187AAF28A2D01
Derived From Document ID        : uuid:9A00C1536C61E311B2D187AAF28A2D01
N Pages                         : 1
Has Visible Transparency        : False
Has Visible Overprint           : False
Max Page Size W                 : 63.000009
Max Page Size H                 : 29.699994
Max Page Size Unit              : Centimeters
Font Name                       : Arial-BoldMT, ArialMT, Futura-Bold, MyriadPro-Bold, MyriadPro-Semibold, MyriadPro-It, MyriadPro-Regular, Myriad-Bold, Myriad-Italic, Myriad-Roman, Futura-Light
Font Family                     : Arial, Arial, Futura Md, Myriad Pro, Myriad Pro, Myriad Pro, Myriad Pro, Myriad, Myriad, Myriad, Futura Light
Font Face                       : Bold, Regular, Bold, Bold, Semibold, Italic, Regular, Bold, Italic, Roman, Light
Font Type                       : Open Type, Open Type, TrueType, Open Type, Open Type, Open Type, Open Type, Type 1, Type 1, Type 1, Unknown
Font Version                    : Version 3.00, Version 3.00, mfgpctt-v4.4 Feb 4 2000, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.102;PS 2.000;hotconv 1.0.67;makeotf.lib2.5.33168, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895, 001.000, 001.000, 001.000, Version 2.062;PS 2.000;hotconv 1.0.57;makeotf.lib2.0.21895
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : ARIALBD.TTF, ARIAL.TTF, FtraBd__.ttf, MyriadPro-Bold.otf, MyriadPro-Semibold.otf, MyriadPro-It.otf, MyriadPro-Regular.otf, wmb_____.pfb; wmb_____.pfm, wmi_____.pfb; wmi_____.pfm, wmr_____.pfb; wmr_____.pfm, MyriadPro-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 預設色票群組
Swatch Groups Group Type        : 0
Swatch Groups Colorants Swatch Name: Black
Swatch Groups Colorants Type    : PROCESS
Swatch Groups Colorants Tint    : 100.000000
Swatch Groups Colorants Mode    : CMYK
Swatch Groups Colorants Cyan    : 0.000000
Swatch Groups Colorants Magenta : 0.000000
Swatch Groups Colorants Yellow  : 0.000000
Swatch Groups Colorants Black   : 100.000000
Producer                        : Adobe PDF library 8.00
Page Count                      : 1
Creator Version                 : 13
Container Version               : 11
Creator                         : Adobe Illustrator(R) 13.0
For                             : R-Cannyhuang^,
Bounding Box                    : -174 -4 1605 1017
EXIF Metadata provided by EXIF.tools
FCC ID Filing: RD2RWD01001

Navigation menu