Daimler Trucks North America CTP054631 Telematics Control Unit User Manual Antenna Installation

Download:
Mirror Download [FCC.gov]
Document ID	3256010
Application ID	gD1nWOajPr2CzxnGdOshsQ==
Document Description	Antenna Installation
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	102kB (1274966 bits)
Date Submitted	2017-01-12 00:00:00
Date Available	2017-01-12 00:00:00
Creation Date	2015-12-18 11:55:13
Producing Software	GPL Ghostscript 8.15
Document Lastmod	2017-01-10 12:10:38
Document Title	Microsoft PowerPoint - prod.VIEWCAD.D66-05498.-.1.41746528.PPT [Read-Only]
Document Creator	PScript5.dll Version 5.2
Document Author:	dtna_cvd_s_smprint

RELEASE
NUMBER
REV
LTR
P47372-06
REVISION DESCRIPTION
INITIAL RELEASE
BY
DATE
APPD
RCN
11/07/15
RPW
VIEW A
SEE PAGE 2
VIEW C
5.
TORQUE SCREW TO 15 +/- 4 in-lbs.
INSTL-CTP,BASE,HIRSH ANT,FPT
MOUNT VIRTUAL TECHNICIAN ECU MODULE (ITEM 5) TO
MOUNTING BRACKET (ITEM 6), WITH HOOK AND LOOP
TAPE (ITEMS 7 & 8) AS SHOWN.
D66-05498-000
D66-05498-001
4.
ATTACH ANTENNA (ITEM 11) TO THE TOP OF THE
ELECTRICAL BAY HOUSING USING THE INCLUDED
FOAM TAPE. CONNECT ANTENNA PIGTAIL TO THE
ANTENNA EXTENTION CABLE (ITEM 12). ROUTE
EXTENTION CABLE TO THE VT MODULE (ITEM 5),
FOLLOWING THE MAIN CAB HARNESS PATH. SECURE
CABLE USING TIE STRAPS (ITEM 3).
ITEM NUMBER
3.
DESCRIPTION
ATTACH ANTENNA (ITEM 2) TO THE TOP OF THE
ELECTRICAL BAY HOUSING USING THE INCLUDED
FOAM TAPE. ROUTE ANTENNA PIGTAIL TO THE CTP
MODULE (ITEM 1), FOLLOWING THE MAIN CAB HARNESS
PATH. SECURE PIGTAIL USING TIE STRAPS (ITEM 3).
ITEM NUMBER
2.
DESCRIPTION
TO INSTALL: SLIDE THE MODULE FORWARD ON THE
DESIGNATED SHELF UNTIL THE REAR SPRING CLIPS
ARE COMPRESSED. THEN, LOCK THE 2 TABS OF THE
MODULE INTO THE 2 SLOTS IN THE SHELF. CHECK TO
MAKE SURE THE TABS ARE FULLY ENGAGED IN THE
SHELF.
INSTL-CTP,BASE,VT,HIRSH ANT,FPT
SEE PAGE 3
1.
Daimler Trucks
North America
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY DATA, AND IS NOT FOR DISSEMINATION OR DISCLOSURE,
IN WHOLE OR IN PART, FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT ISSUBMITTED, EXCEPT AS
AUTHORIZED IN WRITING BY DAIMLER TRUCKS NORTH AMERICA LLC (DTNA)
MATERIAL APPROVAL
DATE
N/A
N/A
DRAWN BY
DATE
R.NELSON
11/07/15
CHECKED BY
DATE
R.WEBER
11/07/15
RESPONSIBLE ENGINEER
UNLESS OTHERWISE NOTED, DIMENSIONS AND
TOLERANCESARE DEFINED ACCORDING TO
ASME Y14.5M- 1994,WITH EXCEPTION PER
DTNA 09ENG-WI037
DATE
R.NELSON
11/07/15
APPROVED BY
DATE
R.WEBER
11/07/15
UNITS OF
MEASURE
THIRD
ANGLE
PROJECTION
MM
DESCRIPTION
INSTL-DRCDG,COM TELEMATICS,BASE
SUPPLEMENTAL DESCRIPTION
813A1
ITEM/DRAWING NUMBER
D66-05498
CTP, VT
FPT
REVISION LETTER
PAGE
1 of 4
ELECTRICAL BAY
REF MOD 680
VIEW B
11 REF
12 REF
11: Not foreseen for CTPBASEDTNA
11
2: Combination GSM+GPS
ELECTRICAL
BAY
REF MOD 680
MAIN CAB HARNESS
REF MOD 320
VIEW A
ORIENT CABLES
AS SHOWN
DASH NOT SHOWN
FOR CLARITY
FWD
VIEW B
(FROM PAGE 1)
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY DATA, AND IS NOT FOR DISSEMINATION OR
DISCLOSURE, IN WHOLE OR IN PART, FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT
ISSUBMITTED, EXCEPT AS AUTHORIZED IN WRITING BY DAIMLER TRUCKS NORTH AMERICA LLC (DTNA)
Daimler Trucks
North America
ITEM/DRAWING NUMBER
D66-05498
REVISION LETTER
PAGE
2 of 4
4
REF
12
-001
ONLY
MAIN CAB HARNESS
REF MOD 320
-001
ONLY
DETAIL D
VIEW C
-001 ONLY
ECU INSTALLATION
SEE PAGE 4
(FROM PAGE1)
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY DATA, AND IS NOT FOR DISSEMINATION OR
DISCLOSURE, IN WHOLE OR IN PART, FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT
ISSUBMITTED, EXCEPT AS AUTHORIZED IN WRITING BY DAIMLER TRUCKS NORTH AMERICA LLC (DTNA)
Daimler Trucks
North America
ITEM/DRAWING NUMBER
D66-05498
REVISION LETTER
PAGE
3 of 4
5
-001
ONLY
-001
7 2X ONLY
-001
8 2X ONLY
-001
9 2X ONLY
-001
10 2X ONLY
DETAIL D
-001 ONLY
VIRTUAL TECHNICIAN
EXPLODED VIEW
-001
ONLY
(FROM PAGE 3)
THE INFORMATION CONTAINED HEREIN IS PROPRIETARY DATA, AND IS NOT FOR DISSEMINATION OR
DISCLOSURE, IN WHOLE OR IN PART, FOR ANY PURPOSE OTHER THAN THAT FOR WHICH IT
ISSUBMITTED, EXCEPT AS AUTHORIZED IN WRITING BY DAIMLER TRUCKS NORTH AMERICA LLC (DTNA)
Daimler Trucks
North America
ITEM/DRAWING NUMBER
D66-05498
REVISION LETTER
PAGE
4 of 4

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : dtna_cvd_s_smprint
Create Date                     : 2015:12:18 11:55:13Z
Modify Date                     : 2017:01:10 12:10:38+01:00
Has XFA                         : No
XMP Toolkit                     : XMP Core 5.5.0
Format                          : application/pdf
Creator                         : dtna_cvd_s_smprint
Title                           : Microsoft PowerPoint - prod.VIEWCAD.D66-05498.-.1.41746528.PPT [Read-Only]
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2017:01:10 11:28:46+01:00
Producer                        : GPL Ghostscript 8.15
Document ID                     : uuid:0f567a81-06c8-464d-96c8-0611b795dd6b
Instance ID                     : uuid:ca978ac6-219f-4a68-874b-9af646774d3c
Page Count                      : 4

EXIF Metadata provided by EXIF.tools