Dalian Seaside Door Controlling System T183-315 Remote Control User Manual

Dalian Seaside Door Controlling System Co., Ltd Remote Control Users Manual

Users Manual

User manualThere are four keys on the product,and each keystand for a sole code with the carrier of 315MHZ.For example:If you press k1 button,the transmitter will transmit aserial code with the carrier of 315MHZ,and it is sole，we called it channel 1.and at the same time,the receiverwhich have the same code with the transmitter,receivedthe code ,it will take some action,just for example,controlthe relay,led,beep,and so on.K2 stand for channel 2,and has the same usage withK1 which describe above.And so do k3,k4…Product DescriptionName of EUT：Remote ControlModel No.: T183-315Power supply: DC3.0V from batteryOperation frequency: 315.0MHzChannel number: 1Antenna type: Intergral AntennaAntenna gain: 0dBi
FCC STATEMENTThis device complies with Part 15 of the FCC Rules. Operation issubject to the following two conditions:(1) This device may not cause harmful interference.(2) This device must accept any interference received, includinginterference that may cause undesired operation.Changes or modifications not expressly approved by the partyresponsible for compliance could void the user's authority to operate theequipment.NOTE: This equipment has been tested and found to comply withthe limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protectionagainst harmful interference in a residential installation.This equipment generates uses and can radiate radio frequencyenergy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radioor television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct theinterference by one or more of the following measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.

Navigation menu