Dalian Seaside Door Controlling System T183-315 Remote Control User Manual
Dalian Seaside Door Controlling System Co., Ltd Remote Control Users Manual
Users Manual
User manual
There are four keys on the product,and each key
stand for a sole code with the carrier of 315MHZ.
For example:
If you press k1 button,the transmitter will transmit a
serial code with the carrier of 315MHZ,and it is sole，
we called it channel 1.and at the same time,the receiver
which have the same code with the transmitter,received
the code ,it will take some action,just for example,control
the relay,led,beep,and so on.
K2 stand for channel 2,and has the same usage with
K1 which describe above.
And so do k3,k4…
Product Description
Name of EUT：Remote Control
Model No.: T183-315
Power supply: DC3.0V from battery
Operation frequency: 315.0MHz
Channel number: 1
Antenna type: Intergral Antenna
Antenna gain: 0dBi
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.