Damerell Consulting CONNEQ2 Low energy Bluetooth industrial asset tag User Manual Site Survey

Damerell Consulting Ltd Low energy Bluetooth industrial asset tag Site Survey

Contents

Conneq2 Instructions V1.3

Download: Damerell Consulting CONNEQ2 Low energy Bluetooth industrial asset tag User Manual Site Survey
Mirror Download [FCC.gov]Damerell Consulting CONNEQ2 Low energy Bluetooth industrial asset tag User Manual Site Survey
Document ID3735127
Application IDffH/O84DOgzXww6KdVRVkA==
Document DescriptionConneq2 Instructions V1.3
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize23.68kB (295967 bits)
Date Submitted2018-01-31 00:00:00
Date Available2018-01-31 00:00:00
Creation Date2018-01-30 11:11:43
Producing SoftwareMicrosoft® Word 2016
Document Lastmod2018-01-30 11:11:43
Document TitleSite Survey - Template
Document CreatorMicrosoft® Word 2016
Document Author: Yuri Guest

Damerell Consulting
Conneq2 Usage
The Conneq2 Tag is a sealed Industrial tag that can be used for tagging indoor and
outdoor assets. The tags are supplied with a fitting kit that allows them to be attached
to either flat curved surfaces.
Typical outdoor applications are tracking plant equipment and cable drums in managed
yards
Whilst indoor applications can include tracking IT equipment, bedframes and trolleys.
Fitting Instructions
Requirements
▪ Conneq2 Tag
▪
Fitting Kit, tubular or flat
▪
Dry Cloth
▪
Philips Screw Driver
Installation
First ensure that the mounting surface is clean and free from debris, remove any dirt
using the cloth.
Using the suitable mounting kit, tubular for mounting on poles or flat for mounting on
flat surfaces, attach the mounting kit to the surface using the supplied fixings and
tighten with the screw driver.
Clip the tag into the mounting kit.
Maintenance
The Conneq2 is a sealed unit and requires no maintenance during its life span.
Cleaning
The Conneq2 can be cleaned using water applied to a cloth.
Solvents and Oils should not be used for cleaning the Conneq2
End of Life
At the end of its functional life the tag must be disposed of in a suitable local recycling
facility and in accordance with any local laws pertaining to the recycling of waste
electronic equipment. The tag consists of an ABS plastic internal housing over molded
with TUP, electronic components and a lithium battery. The tag contains no substances
banned by the European Union’s Restriction of Hazardous Substances (RoHS) directive.
Damerell Consulting
Environmental
The Conneq2 has an operational temperature range of -20 to 60 Degrees Celcius.
FCC Statement
This device complies with Part 15 of FCC Rules and standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for an Intentional
radiator, pursuant to Part15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 2
Language                        : en-GB
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Word 2016
Title                           : Site Survey - Template
Creator                         : Yuri Guest
Description                     : PROJECT NAME
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2018:01:30 11:11:43+00:00
Modify Date                     : 2018:01:30 11:11:43+00:00
Document ID                     : uuid:29F196DA-CEF5-4D1E-82B4-E45FC136B284
Instance ID                     : uuid:29F196DA-CEF5-4D1E-82B4-E45FC136B284
Author                          : Yuri Guest
Subject                         : PROJECT NAME
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AN53-CONNEQ2

Navigation menu