Damm Cellular Systems A S 104012 410 MHZ TRANSCEIVER MODULE User Manual Warning statements for user s manual

Warning statements for user's manual

User Manual to be amended/updated with:

General Warning

This manual contains important safety and operation information. Please read and follow the

instructions in this manual. Failure to do so could be hazardous and result in damage to your device.

Changes and modifications to this device not expressly proved by DAMM could void the user’s

authorization to operate this device

FCC Regulations

The DAMM developed device mentioned in this User Manual fulfill the below statements according to

FCC/IC 2 warning statements:

This device complies with part 15 of the FCC Rules. Operation is subjekt to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation

RF Exposure

The DAMM developed transmitting devices mentioned in this User Manual have the Nemko approval

concerning “Maximum Permissible Exposure Calculations” which are the European limits for maximum

permissible exposure defined in the document 1995/519/EC, Council Recommendation of 12. July 1999.

The results are to be found in the Nemko Document 128948/5 in the appendix of this User Manual.

Antennas

The outside antenna connected to this device must be installed on an outdoor permanent structure with

a separation of at least 20 feet from all persons during normal operation.

Notice

 Do not modify any part of this device for any reason

 Do not place any combustible material near the transceiver

 Do not spray any liquid over the device

 Ensure that the power and antenna connections are securely made, using cables recommended

and with excess capacity for the power being utilized.