Danfoss A S TYPE-CFR Wireless Floor Heating Control System User Manual Vi 88 R1 03

Download:
Mirror Download [FCC.gov]
Document ID	133694
Application ID	DPpSRvVoiYvKD01p94H6Pg==
Document Description	Users Guide
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.55kB (69407 bits)
Date Submitted	2001-01-23 00:00:00
Date Available	2001-03-12 00:00:00
Creation Date	2000-01-27 10:19:20
Producing Software	Acrobat Distiller 4.0 for Windows
Document Lastmod	2000-01-27 10:19:21
Document Title	Vi.88.R1.03
Document Creator	Adobe PageMaker 6.52
Document Author:	F10389

Temperature setting
Set room temperature on the thermostat dial.
Limitation of the setting range
Behind the button for temperature setting are two
lock-rings. These can be moved as shown if the
thermostat setting range is to be narrowed.
On the right-hand side of the thermostat is a
function switch with 3 possible settings:
Room Thermostat
User Guide
¹
Typ CFR
The room temperature will be as set
on the thermostat.
Used only if the zone regulator is engaged. The temperature will be as set
on the room thermostat, but in accordance with the consumption pattern
entered.
The consumption pattern in the zone
regulator can be overridden by moving
the switch to or .
The room temperature will be as set
on the thermostat - minus 5°C.
FCC ID: XXXTYPE.CFR
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
“This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of the
device.”
Li 3,6V/1,9Ah
Room Thermostat
Instructions for Installation
Registration field in
master regulator
088R0223
DKCD 01/00
VI.88.R1.02
Typ CFR
Registration of room thermostat with output(s)
- Connect the room thermostat (fig. 1) and the CFM master regulator via the black installation cable. The first vacant output in the registration field will flash. Other vacant outputs will be lit. Outputs already registered are
not on (fig. 2).
- If OK is pressed briefly, the room thermostat has been
registered with the output and the LED goes off (fig. 2).
- If the room thermostat is to be registered with more than
one output, go to these outputs by means of the +/- keys
and confirm by pressing OK briefly.
- When the installation cable is removed, the red LED underneath the battery cover (fig. 1) will flash for at least
one minute (Test mode).
Unregistration of room thermostat
The room thermostat and the master regulator may not
be connected.
-Press OK for 5 sec.; the first LED in the row for registered room thermostats will flash (fig. 2). Other LEDs for
registered room thermostats will flash.
- Use the +/- keys to go to the room thermostat to be unregistered (it will flash).
- Confirm unregistration by pressing OK for 5 sec.. The
LED goes off.
Test of room thermostat
If a defect in a room thermostat is suspected, the following test may be carried out:
- Set the thermostat to the highest temperature (EC).
- Move the function switch on the side of the room thermostat to a new position.
- If the LED underneath the battery cover (fig. 1) flashes
quickly for at least one minute, the room thermostat is in
order.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2000:01:27 10:19:20
Producer                        : Acrobat Distiller 4.0 for Windows
Subject                         : Vi.88.R1.03
Author                          : F10389
Creator                         : Adobe PageMaker 6.52
Title                           : Vi.88.R1.03
Modify Date                     : 2000:01:27 10:19:21+01:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools