DareGlobal Technologies 6519A1A2 ADSL2+ 4 Port Router WIFI 802.11B/G/N 2X2 User Manual PRODUCT SPECIFICATIONS

Shanghai DareGlobal Technologies Co., Ltd. ADSL2+ 4 Port Router WIFI 802.11B/G/N 2X2 PRODUCT SPECIFICATIONS

Users Manual

Product Specifications
TA04G-F68
March 18, 2011
Shanghai Dareglobal Ltd
SHANGHAI DAREGLOBAL LTD
2
Contents
PRODUCT OVERVIEW ....................................................................................................................... 3
1.1 INTRODUCTION ......................................................................................................................... 3
1.2 PRODUCT KEY FEATURE ........................................................................................................... 3
2 HARDWARE ARCHITECTURE ................................................................................................. 4
2.1 HARDWARE INTERFACES ........................................................................................................... 4
2.2 MAIN CHIPSET INFORMATION .................................................................................................... 4
2.3 LED DEFINITIONS .................................................................................................................... 4
3 SOFTWARE FEATURES ............................................................................................................. 4
4 SPECIFICATIONS AND STANDARDS ..................................................................................... 11
4.1 ELECTRICAL ........................................................................................................................... 11
4.1.1 Power Requirements: ......................................................................................................... 11
4.1.2 Heat & Power Dissipation ................................................................................................. 12
4.2 ENVIRONMENTAL ................................................................................................................... 12
SHANGHAI DAREGLOBAL LTD
3
PRODUCT OVERVIEW
1.1 Introduction
TA04G-F68 connects to computer by four Ethernet Ports, either by Wireless.
It is an ideal device for broadband wireless access.
TA04G-F68 supports IEEE 802.11b/g/n, Users could enjoy 270Mbps speed steadily. In
security, it supports all-ser of the Wireless Transfers Encrypt Protocol.
It has high performance, standard-based and existence together with general line. It is
the best choice of telecommuting、mini-type office and family. It can carry out VOD, ftp,
downloading files more quickly than traditional MODEM. Moreover, low cost which it
brings also is that we are glad to see.
It supports upload transmission speed up to 1Mbps and download speed up to 8 Mbps
(24Mbps for ADSL2+). The setting of the ADSL2/2+ is flexible and convenient.
In function, TA04G-F68 supported 8 PVCs; powerful router function; Diagnosis
Function; Multicast Function; PPPoE Function; Real-time listening the status of the
network connection; Monitor software.
In manipulation, TA04G-F68 provides one convenient, friendly configuration UI;
In software maintenance, TA04G-F68 may remote upgrade and remote management;
In compatibility, TA04G-F68 is compatible to popular DSLAM absolutely.
1.2 Product Key Feature
1. Support IEEE 802.11b/g/n, Wireless Rate achieve 270Mbps.
2. Support ANSI T1.413 Issue 2; ITU G.992.1 (G.dmt) Annex A,B,C; ITU G.992.2
(G.lite); ITU G.992.3 ADSL2 (G.dmt.bis); ITU G.992.4 ADSL (G.lite.bis); ITU G.992.5
ADSL2+; Extended Reach(READSL2),
3. TA04G-F68 is not only a powerful ADSL modem, but a strong local network router
with features of DHCP, DNS and NAPT.
4. Downstream up to 8M for ADSL,24 Mbps for ADSL2+; Upstream up to 1Mbps
5. Routing from WAN to LAN
6. Basic Gateway features such as NAT, DHCP, and DNS. Etc, to provide the capability
to construct private network.
7. Firewall
8. IP filter, IP forwarding, IPQos
9. Web-based GUI
10. Support 8 PVCs
11. ATM management features
12. Parent Control
SHANGHAI DAREGLOBAL LTD
4
2 HARDWARE ARCHITECTURE
2.1 Hardware Interfaces
Four RJ-45 ports for 10/100 Base-T Ethernet LAN connection to PC
One RJ-11 port for connection to WAN (for ADSL Line)
One reset button to default setting
One power jack
One WPS/WIFI button
One USB2.0
2.2 Main Chipset Information
Item
Vendor
Model # & Edition
CPU
Broadcom
BCM63281T
2.3 LED Definitions
Label
Status
POWER
LAN1-4
USB2.
0
LINK
INTERNET
Steady
Light
Power on
Ethernet
line is
connected
USB
device
is
connec
ted
The modem
is in good
connection
Connected
with PC
Flashing
/
/
/
In
handshaking
status
/
Fast
Flashing
/
Transformi
ng data
Transfo
rming
data
/
Transmitting
or receiving
data
Off
Power off
Ethernet
line not
connected
properly
NoUSB
device
connec
ted
Connection
not set up
Not
connected
with PC
property
3 SOFTWARE FEATURES
TA04G-F68 provides the following features:
SHANGHAI DAREGLOBAL LTD
5
ADSL
T1.413i2, G.992.1
(G.dmt), G.992.2
(G.lite)
Annex A (Annex B
and C are optional)
G.992.3
(G.bis/ADSL2)
ADSL and ADSL2 dual mode
PHY
G.992.5 (ADSL2+)
ADSL2+
Annex L (Reach
Extended ADSL2)
Annex M
ATM
PVCs
supports 8 PVCs
ATM QoS: CBR, rt-
VBR, nrt-VBR, UBR-
with-PCR, UBR
service categories
and associated traffic
parameters (PCR, SCR,
MBS)
Wireless
MAC filter
Wireless bridge
802.1x/Radius
server/Dynamic
WEP allocation
Available through special release
Secure Easy Setup
(SES)
Multiple SSIDs,
QoS/WMM
Device
Configuration,
Management and
Update
Web based GUI
Embedded web server
Download image via
HTTP or tftp client
Download image via
FTP server
Download image via
TFTP server
Command Line
Interface via serial
port, telnet, or ssh
added dumpcfg, sntp commands.
Added option to tftp, adsl, wan, ppp
commands. Upgrade sshd to version
0.46.
SHANGHAI DAREGLOBAL LTD
6
Menu-driven CLI via
serial port or telnet
Added dump configuration.
Universal Plug and
Play (UPnP) Internet
Gateway Device
(IGDv1.0)
V2.14L.02: Upgraded UPnP with
latest version.
Added support for ADSL IGD.
Enable/disable UPnP without reboot.
SNMP v1/v2c agent
SNMP MIBs: rfc2662
ADSL line MIB,
rfc2515 ATM MIB,
MIB-II
Support GET only except
GET/SET for system MIB and
ifAdminStatus in ifTable.
Date/time update
from SNTP Internet
Time Server
Automatic synchronize date and time
with Internet Time Servers and local
time zone setup.
Display Date/time in device info and
syslog. Added SNTP command.
Daylight saving zone
TR-69
Support 273
parameters,digest/certificate/SSL
security.
Support proprietary parameters
implementation without tr69c
framework sources
Security
Three level login
including local
admin, local user
and remote technical
support access
Service access
control based on
incoming interface:
WAN or LAN
Access control from LAN or WAN
is individually configurable for
http, telnet, snmp, ftp, tftp, ssh,
icmp
Service access
control based on
source IP addresses
Access control based on source
IP address for http, telnet, snmp,
ftp, tftp, ssh, icmp. Maximum
capacity is 16 IP addresses.
Denial of Service
(DOS)
Protect following DOS attacks
from WAN/LAN: SYN flooding, IP
smurfing, ping of Death, fraggle,-
UDP ECHO (port 7) , teardrop,
land.
Diagnostics
Responds and
initiates ATM OAM
F4/F5 end-to-end,
segment-to-segment
loopback tests
ADSL BER Test
SHANGHAI DAREGLOBAL LTD
7
based on idle cell bit
error detection
PPPoE server
discovery
Ping DNS server and
Default Gateway
Statistics display for
ADSL PHY, ATM,
LAN (USB, Ethernet,
802.11b) and WAN
interfaces
Added Ethernet switch port 1 ~ 3
statistics display. V2.14L.02
added WAN interface statistics.
Diagnostics for
multiple PVCs and
PPPoE sessions
Removed separate pop-up
diagnostics report WEB page for
each PVC. Added button to
diagnose next PVC or session.
Logging
User selectable
levels
Local display and/or
send to remote
syslog server or save
to file
ADSL up/down
PPP up/down
Intrusion alert
Primary DNS server
status monitor
XML config file
failures
Log XML config file parsing
failures
Debugging Tools
Port Mirroring
Monitor and send mirrored
Ethernet frames from/to a WAN
interface to a LAN port.
Networking
Protocols
RFC2684 VC-MUX,
LLC/SNAP
encapsulations for
bridged or routed
packet
VC-MUX for any connection type
RFC2364 PPP over
AAL5
RFC2364 LLC/NLPID
encapsulation for PPPoA
802.1q/1p VLAN
over RFC2684
Bridge encapsulation
802.1q header insertion toward
WAN and de-insertion toward
LAN over RFC2684 bridge mode
over AAL5. Supports multiple
VLANs on multiple PVCs and
mapping VLANs, PVCs and
physical LAN ports to multiple
SHANGHAI DAREGLOBAL LTD
8
bridges.
PPPoA
Support AUTO, PAP, CHAP, MS-
CHAP authentication
Added static IP address
assignment.
PPPoE
Support AUTO, PAP, CHAP, MS-
CHAP authentication
Added static IP address
assignment.
Multiple PPPoE
sessions on single
PVC
Allows multiple PPPoE sessions
on one PVC.
PPPoE pass-through
Supports concurrent PPPoE
clients inside the modem and
PPPoE clients on the LAN
devices
PPPoE - filtering of
non-PPPoE packets
between WAN and
LAN
Previously only filtered non-
PPPoE packet from LAN to WAN,
now works in both directions.
Auto-clean-up
remote staled PPP
sessions at BRAS
Clean up staled PPP sessions
(PPPoE and PPPoA) at ISP
BRAS after ADSL link goes down
then up or after modem reboots, if
scratch pad is enabled on top
boot flash.
IPoA
MER (a.k.a IP over
Ethernet over AAL5)
Transparent bridging
between all LAN and
WAN interfaces
Enabled STP in bridge for LAN
interfaces to avoid looping among
multiple wireless gateways.
Second IP address
on LAN interface
Only public IP address and no
DHCP on second IP address.
ARP
DNS relay
DNS server fallback
in DNS Relay
Launch dnsprobe process when
both primary and secondary
DNS’s are assigned. Probe
primary DNS status and fallback
to secondary DNS. When primary
DNS is up again, switch back to
primary DNS.
DHCP server
DHCP client
DHCP Relay
DHCP relay agent for IPoA and
MER type of WAN connections.
NAPT
IGMP Proxy
IGMP v1/v2
SHANGHAI DAREGLOBAL LTD
9
IGMP Snooping
IGMPv1/v2 snooping in bridge
mode. Added blocking mode.
RIP v1/v2
Enable RIP over multiple WAN
Interfaces
Dynamic DNS
Automatic update WAN IP
address when it is changed to
dyndns.org and/or TZO DDNS
operator.
LAN port to VC
mapping
Supports traffic mapping between
a group of LAN ports to a PVC.
Ethernet as WAN
interface.
Added Ethernet as WAN interface
to support PPPoE or IP over
Ethernet.
Multiple Protocol
VLAN Mux
Support multiple protocols on
single PVC using VLAN ID
Multiple Service PVC
Support PPPoE, Bridge, and
MER services over a single PVC
Packet Level QoS
IP/Bridge/802.1p
QoS
Supported both routed and
bridged mode PVCs for packet
level QoS: classification rules,
priority queuing using ATM TX
queues, IP TOS/Precedence,
802.1p marking. Added DiffServ
DSCP marking and src/dest MAC
addresses classification.
CPU resource
reservation for local
VoIP traffic
manage utilization of the CPU
resources to allow better quality
of the VoIP calls under heavy
data traffic conditions
VPN
IPsec VPN(optional)
Support VPN connection to
remote VPN gateway.
Firewall/Filtering
Stateful Inspection
SPI Fire Wall
Denial of Service
attack
Passed DOS attacks: ARP
Attack, Ping Attack, Ping of
Death, Land, SYNC, Smurf,
Unreachable,Tear Drop
TCP/IP/Port/interface
filtering rules
Support both incoming and
outgoing filtering.
MAC Layer Filtering
Added IGMP in protocol menu.
Filter MAC frames based on
protocol type, source/destination
MAC address, direction
Day-time Parental
Control
NAPT
Configuration
SHANGHAI DAREGLOBAL LTD
10
Port Triggering
Redesigned WEB UI; added 9
applications in application menu.
Port forwarding
Redesigned WEB UI with 134
applications in service menu.
DMZ host
ALGs
H.323
Support Microsoft
H.323/NetMeeting.
TFTP
FTP
RTSP
Allows Microsoft Windows media
player, Real media player,
RealOne Player,
RealAudio/RealVideo, RealPlayer
8, and QuickTime media player to
use UDP transport.
ICMP
IPSec/VPN and
IPSec/L2TP
Allow multiple IPsec sessions
from LAN to connect to multiple
gateways simultaneously.
Supports all IPSec transactions
using ISAKMP framework for key
negotiation and ESP for payload
transfer.
PPTP
Microsoft DirectX
games ALG (e.g.,
Age of Empire)
Manual configuration is no longer
needed for any DirectX based
game.
Port Triggering
Proxy (for NAT)
SIP Proxy
Other Applications
pass through NAT
MSN Messenger file
transfer and phone
Microsoft Windows
Messenger in
Windows XP
Microsoft Windows
Update
AOL Instant
messenger
Yahoo Messenger
AT&T Instant
Messenger
Anywhere
ICQ greeting card,
message,
SHANGHAI DAREGLOBAL LTD
11
send/request
contact, voice
message; chat and
send file works if
initiator
RC Chat Client
(mIRC) for chat room
between static IP
and NAT PC
supporting DCC chat
and send
PCAnywhere
Remote, Chat, File
Transfer, Clipboard
with Port Forwarding
on TCP port 5631
and UDP port 6532
Age of Empires
Star Craft
Half Life Team
Fortress
Diablo II
Return to Castle
Wolfenstein
Quake II/Quake III
games
Doom
Net-to-Phone
CuSeeMe 5.00
NNTP
Talk
EverQuest
Unreal Tournament
4 SPECIFICATIONS AND STANDARDS
4.1 Electrical
4.1.1 Power Requirements:
TA04G-F68 uses an AC adapter that can supply DC voltages.
AC power adaptor: 100VAC-240VAC(50HZ/60HZ)
DC voltage: 12V, 700mA
SHANGHAI DAREGLOBAL LTD
12
4.1.2 Heat & Power Dissipation
Power: <8.4W
4.2 Environmental
TA04G-F68 complies with the following standards:
Temperature:
- 0 to ＋55 degrees C (Operating)
- -20 to ＋55 degree C (store status)
Humidity:
- 10% to 90% ( Operating)
- 5% to 95% (store status)
Vibration: IEC 68-2-36, IEC 68-2-6
Shock: IEC 68-2-29
Drop: IEC 68-2-32
FCC Information
This equipment complies with CFR 47, Part 15.19 of the FCC rules. Operation of
the equipment is subject to the following conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received;
including interference that may cause undesired operation.
This device must not be co-located or operating in conjunction
with any other antenna or transmitter
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO
OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS
TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S
AUTHORITY TO OPERATE THE EQUIPMENT.
Federal Communications Commission (FCC) Requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
---Consult the dealer or an experienced radio/TV technician for help.
Regulatory information / Disclaimers
Installation and use of this Wireless LAN device must be in strict accordance with
the instructions included in the user documentation provided with the product. Any
changes or modifications (including the antennas) made to this device that are not
expressly approved by the manufacturer may void the user’s authority to operate
the equipment. The manufacturer is not responsible for any radio or television
interference caused by unauthorized modification of this device, or the substitution
of the connecting cables and equipment other than manufacturer specified. It is the
responsibility of the user to correct any interference caused by such unauthorized
modification, substitution or attachment. Manufacturer and its authorized resellers
or distributors will assume no liability for any damage or violation of government
CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this
equipment should be installed and operated with minimum distance 20cm
between the radiator and your body. Use on the supplied antenna.
Unauthorized antenna, modification, or attachments could damage the
transmitter and may violate FCC regulations.
MPE Statement (Safety Information)
Your device contains a low power transmitter. When device is transmitted it sends
out Radio Frequency (RF) signal.
Safety Information
In order to maintain compliance with the FCC RF exposure guidelines, this
equipment should be installed and operated with minimum distance 20cm between
the radiator and your body. Use only with supplied antenna. Unauthorized antenna,
modification, or attachments could damage the transmitter and may violate FCC
regulations.
FCC Part 68 Statement
This equipment complies with part 68 of the FCC rules. On the rear panel of this
equipment is a label that contains, among other information, the FCC registration
number and ringer equivalence number (REN) for the equipment. If requested, this
information must be provided to the telephone company.The REN is used to
determine the quantity of devices which may be connected to the telephone line.
Excessive RENs on the telephone line may result in the devices not ringing in
response to an incoming call. In most, but not all areas, the sum of the RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to the line, as determined by the total RENs, contact the telephone
company to determine the maximum REN for the calling area.This equipment uses
the following USOC jack: RJC. An FCC-compliant telephone cord and modular
plug is provided with this equipment. This equipment is designed to be connected
to the telephone network or premises wiring using a compatible modular jack which
is Part 68 compliant.
This equipment cannot be used on telephone company-provided coin services.
Connection to Party Line Service is subject to state tariffs.If this equipment causes
harm to the telephone network, the telephone company will notify you in advance
that the temporary discontinuance of services may be required. If advance notice
isn't practical, the telephone company will notify the customer as soon as possible.
Also, you will be advised of your right to file a compliant with the FCC if you believe
it is necessary.The telephone company may make changes in its facilities,
equipment, operations, or procedures that could affect the operation of the
equipment. If this happens, the telephone company will provide advance notice in
order to maintain uninterrupted service.If the trouble is causing harm to the
telephone system, the telephone company may request that you remove the
equipment from the network until the problem is resolved.It is recommended that
the customer install an AC surge arrestor in the AC outlet to which this device is
connected. This is to avoid damaging the equipment by loca lightning strikes and
other electrical surges.

Navigation menu