DareGlobal Technologies 6519A1A2 ADSL2+ 4 Port Router WIFI 802.11B/G/N 2X2 User Manual PRODUCT SPECIFICATIONS
Shanghai DareGlobal Technologies Co., Ltd. ADSL2+ 4 Port Router WIFI 802.11B/G/N 2X2 PRODUCT SPECIFICATIONS
Users Manual
Product Specifications TA04G-F68 March 18, 2011 Shanghai Dareglobal Ltd Contents PRODUCT OVERVIEW ....................................................................................................................... 3 1.1 1.2 INTRODUCTION ......................................................................................................................... 3 PRODUCT KEY FEATURE ........................................................................................................... 3 HARDWARE ARCHITECTURE ................................................................................................. 4 2.1 2.2 2.3 HARDWARE INTERFACES ........................................................................................................... 4 MAIN CHIPSET INFORMATION .................................................................................................... 4 LED DEFINITIONS .................................................................................................................... 4 SOFTWARE FEATURES ............................................................................................................. 4 SPECIFICATIONS AND STANDARDS ..................................................................................... 11 4.1 ELECTRICAL ........................................................................................................................... 11 4.1.1 Power Requirements: ......................................................................................................... 11 4.1.2 Heat & Power Dissipation ................................................................................................. 12 4.2 ENVIRONMENTAL ................................................................................................................... 12 SHANG HAI DAR EG LO BAL LTD PRODUCT OVERVIEW 1.1 Introduction TA04G-F68 connects to computer by four Ethernet Ports, either by Wireless. It is an ideal device for broadband wireless access. TA04G-F68 supports IEEE 802.11b/g/n, Users could enjoy 270Mbps speed steadily. In security, it supports all-ser of the Wireless Transfers Encrypt Protocol. It has high performance, standard-based and existence together with general line. It is the best choice of telecommuting、mini-type office and family. It can carry out VOD, ftp, downloading files more quickly than traditional MODEM. Moreover, low cost which it brings also is that we are glad to see. It supports upload transmission speed up to 1Mbps and download speed up to 8 Mbps (24Mbps for ADSL2+). The setting of the ADSL2/2+ is flexible and convenient. In function, TA04G-F68 supported 8 PVCs; powerful router function; Diagnosis Function; Multicast Function; PPPoE Function; Real-time listening the status of the network connection; Monitor software. In manipulation, TA04G-F68 provides one convenient, friendly configuration UI; In software maintenance, TA04G-F68 may remote upgrade and remote management; In compatibility, TA04G-F68 is compatible to popular DSLAM absolutely. 1.2 Product Key Feature 1. 2. 3. Support IEEE 802.11b/g/n, Wireless Rate achieve 270Mbps. Support ANSI T1.413 Issue 2; ITU G.992.1 (G.dmt) Annex A,B,C; ITU G.992.2 (G.lite); ITU G.992.3 ADSL2 (G.dmt.bis); ITU G.992.4 ADSL (G.lite.bis); ITU G.992.5 ADSL2+; Extended Reach(READSL2), TA04G-F68 is not only a powerful ADSL modem, but a strong local network router with features of DHCP, DNS and NAPT. 4. 5. 6. Downstream up to 8M for ADSL,24 Mbps for ADSL2+; Upstream up to 1Mbps Routing from WAN to LAN Basic Gateway features such as NAT, DHCP, and DNS. Etc, to provide the capability to construct private network. 7. Firewall 8. IP filter, IP forwarding, IPQos 9. Web-based GUI 10. Support 8 PVCs 11. ATM management features 12. Parent Control SHANG HAI DAR EG LO BAL LTD 2 HARDWARE ARCHITECTURE 2.1 Hardware Interfaces Four RJ-45 ports for 10/100 Base-T Ethernet LAN connection to PC One RJ-11 port for connection to WAN (for ADSL Line) One reset button to default setting One power jack One WPS/WIFI button One USB2.0 2.2 Main Chipset Information Item CPU Vendor Broadcom Model # & Edition BCM63281T 2.3 LED Definitions Label Status Steady Light POWER LAN1-4 Power on Ethernet line is connected WLAN/WPS 1. Client connected, LED will turn off after ca. 2 Minutes 2. wirelsss is connected USB2. USB device is connec ted LINK INTERNET The modem is in good connection Connected with PC Flashing WPS is searching for new client / after pushing WPS/WIFI bottom In handshaking status Fast Flashing Transformi ng data Transforming data Power off Ethernet line not connected properly 1.Wireless not connected 2.WPS off Transmitting or receiving data Not connected with PC property Off 3 SOFTWARE FEATURES TA04G-F68 provides the following features: SHANG HAI DAR EG LO BAL LTD Transfo rming data NoUSB device connec ted Connection not set up ADSL T1.413i2, G.992.1 (G.dmt), G.992.2 (G.lite) Annex A (Annex B and C are optional) G.992.3 (G.bis/ADSL2) G.992.5 (ADSL2+) Annex L (Reach Extended ADSL2) Annex M ADSL and ADSL2 dual mode PHY ADSL2+ ATM PVCs ATM QoS: CBR, rtVBR, nrt-VBR, UBRwith-PCR, UBR service categories and associated traffic parameters (PCR, SCR, MBS) supports 8 PVCs Wireless MAC filter Wireless bridge 802.1x/Radius server/Dynamic WEP allocation Secure Easy (SES) Multiple SSIDs, QoS/WMM Device Configuration, Management Update Available through special release Setup and Web based GUI Embedded web server Download image via HTTP or tftp client Download image via FTP server Download image via TFTP server Command Line Interface via serial port, telnet, or ssh added dumpcfg, sntp commands. Added option to tftp, adsl, wan, ppp commands. Upgrade sshd to version 0.46. SHANG HAI DAR EG LO BAL LTD Menu-driven CLI via serial port or telnet Universal Plug and Play (UPnP) Internet Gateway Device (IGDv1.0) SNMP v1/v2c agent SNMP MIBs: rfc2662 ADSL line MIB, rfc2515 ATM MIB, MIB-II Date/time update from SNTP Internet Time Server Added dump configuration. V2.14L.02: Upgraded UPnP with latest version. Added support for ADSL IGD. Enable/disable UPnP without reboot. Support GET only except GET/SET for system MIB and ifAdminStatus in ifTable. Automatic synchronize date and time with Internet Time Servers and local time zone setup. Display Date/time in device info and syslog. Added SNTP command. Daylight saving zone TR-69 Support 273 parameters,digest/certificate/SSL security. Support proprietary parameters implementation without tr69c framework sources Security Three level login including local admin, local user and remote technical support access Service access control based on incoming interface: WAN or LAN Service access control based on source IP addresses Access control from LAN or WAN is individually configurable for http, telnet, snmp, ftp, tftp, ssh, icmp Access control based on source IP address for http, telnet, snmp, ftp, tftp, ssh, icmp. Maximum capacity is 16 IP addresses. Protect following DOS attacks from WAN/LAN: SYN flooding, IP smurfing, ping of Death, fraggle,UDP ECHO (port 7) , teardrop, land. Denial of Service (DOS) Diagnostics Responds and initiates ATM OAM F4/F5 end-to-end, segment-to-segment loopback tests ADSL BER Test SHANG HAI DAR EG LO BAL LTD based on idle cell bit error detection PPPoE server discovery Ping DNS server and Default Gateway Statistics display for ADSL PHY, ATM, LAN (USB, Ethernet, 802.11b) and WAN interfaces Diagnostics for multiple PVCs and PPPoE sessions Added Ethernet switch port 1 ~ 3 statistics display. V2.14L.02 added WAN interface statistics. Removed separate pop-up diagnostics report WEB page for each PVC. Added button to diagnose next PVC or session. Logging User selectable levels Local display and/or send to remote syslog server or save to file ADSL up/down PPP up/down Intrusion alert Primary DNS server status monitor XML config file failures Log XML config file parsing failures Debugging Tools Port Mirroring Monitor and send mirrored Ethernet frames from/to a WAN interface to a LAN port. RFC2684 VC-MUX, LLC/SNAP encapsulations for bridged or routed packet RFC2364 PPP over AAL5 802.1q/1p VLAN over RFC2684 Bridge encapsulation VC-MUX for any connection type Networking Protocols RFC2364 LLC/NLPID encapsulation for PPPoA 802.1q header insertion toward WAN and de-insertion toward LAN over RFC2684 bridge mode over AAL5. Supports multiple VLANs on multiple PVCs and mapping VLANs, PVCs and physical LAN ports to multiple SHANG HAI DAR EG LO BAL LTD bridges. Support AUTO, PAP, CHAP, MSCHAP authentication Added static IP address assignment. Support AUTO, PAP, CHAP, MSCHAP authentication Added static IP address assignment. Allows multiple PPPoE sessions on one PVC. PPPoA PPPoE Multiple PPPoE sessions on single PVC PPPoE pass-through Supports concurrent PPPoE clients inside the modem and PPPoE clients on the LAN devices Previously only filtered nonPPPoE packet from LAN to WAN, now works in both directions. PPPoE - filtering of non-PPPoE packets between WAN and LAN Auto-clean-up remote staled PPP sessions at BRAS Clean up staled PPP sessions (PPPoE and PPPoA) at ISP BRAS after ADSL link goes down then up or after modem reboots, if scratch pad is enabled on top boot flash. IPoA MER (a.k.a IP over Ethernet over AAL5) Transparent bridging between all LAN and WAN interfaces Second IP address on LAN interface ARP DNS relay DNS server fallback in DNS Relay Enabled STP in bridge for LAN interfaces to avoid looping among multiple wireless gateways. Only public IP address and no DHCP on second IP address. Launch dnsprobe process when both primary and secondary DNS’s are assigned. Probe primary DNS status and fallback to secondary DNS. When primary DNS is up again, switch back to primary DNS. DHCP server DHCP client DHCP Relay DHCP relay agent for IPoA and MER type of WAN connections. NAPT IGMP Proxy IGMP v1/v2 SHANG HAI DAR EG LO BAL LTD IGMP Snooping IGMPv1/v2 snooping in bridge mode. Added blocking mode. Enable RIP over multiple WAN Interfaces Automatic update WAN IP address when it is changed to dyndns.org and/or TZO DDNS operator. Supports traffic mapping between a group of LAN ports to a PVC. Added Ethernet as WAN interface to support PPPoE or IP over Ethernet. Support multiple protocols on single PVC using VLAN ID Support PPPoE, Bridge, and MER services over a single PVC RIP v1/v2 Dynamic DNS LAN port to VC mapping Ethernet as WAN interface. Multiple Protocol VLAN Mux Multiple Service PVC Packet Level QoS IP/Bridge/802.1p QoS Supported both routed and bridged mode PVCs for packet level QoS: classification rules, priority queuing using ATM TX queues, IP TOS/Precedence, 802.1p marking. Added DiffServ DSCP marking and src/dest MAC addresses classification. manage utilization of the CPU resources to allow better quality of the VoIP calls under heavy data traffic conditions CPU resource reservation for local VoIP traffic VPN IPsec VPN(optional) Support VPN connection to remote VPN gateway. Stateful Inspection Denial of Service attack SPI Fire Wall Passed DOS attacks: ARP Attack, Ping Attack, Ping of Death, Land, SYNC, Smurf, Unreachable,Tear Drop Support both incoming and outgoing filtering. Added IGMP in protocol menu. Filter MAC frames based on protocol type, source/destination MAC address, direction Firewall/Filtering TCP/IP/Port/interface filtering rules MAC Layer Filtering Day-time Parental Control NAPT Configuration SHANG HAI DAR EG LO BAL LTD Port Triggering Redesigned WEB UI; added 9 applications in application menu. Redesigned WEB UI with 134 applications in service menu. Port forwarding DMZ host ALGs H.323 Support Microsoft H.323/NetMeeting. TFTP FTP RTSP Allows Microsoft Windows media player, Real media player, RealOne Player, RealAudio/RealVideo, RealPlayer 8, and QuickTime media player to use UDP transport. ICMP IPSec/VPN and IPSec/L2TP Allow multiple IPsec sessions from LAN to connect to multiple gateways simultaneously. Supports all IPSec transactions using ISAKMP framework for key negotiation and ESP for payload transfer. PPTP Microsoft DirectX games ALG (e.g., Age of Empire) Port Triggering Manual configuration is no longer needed for any DirectX based game. Proxy (for NAT) SIP Proxy Other Applications pass through NAT MSN Messenger file transfer and phone Microsoft Windows Messenger in Windows XP Microsoft Windows Update AOL Instant messenger Yahoo Messenger AT&T Instant Messenger Anywhere ICQ greeting card, message, 10 SHANG HAI DAR EG LO BAL LTD send/request contact, voice message; chat and send file works if initiator RC Chat Client (mIRC) for chat room between static IP and NAT PC supporting DCC chat and send PCAnywhere Remote, Chat, File Transfer, Clipboard with Port Forwarding on TCP port 5631 and UDP port 6532 Age of Empires Star Craft Half Life Team Fortress Diablo II Return to Castle Wolfenstein Quake II/Quake III games Doom Net-to-Phone CuSeeMe 5.00 NNTP Talk EverQuest Unreal Tournament 4 SPECIFICATIONS AND STANDARDS 4.1 Electrical 4.1.1 Power Requirements: TA04G-F68 uses an AC adapter that can supply DC voltages. AC power adaptor: 100VAC-240VAC(50HZ/60HZ) DC voltage: 12V, 700mA 11 SHANG HAI DAR EG LO BAL LTD 4.1.2 Heat & Power Dissipation Power: <8.4W 4.2 Environmental TA04G-F68 complies with the following standards: Temperature: - 0 to +55 degrees C (Operating) - -20 to +55 degree C (store status) Humidity: - 10% to 90% ( Operating) - 5% to 95% (store status) Vibration: IEC 68-2-36, IEC 68-2-6 Shock: IEC 68-2-29 Drop: IEC 68-2-32 12 SHANG HAI DAR EG LO BAL LTD FCC Information This equipment complies with CFR 47, Part 15.19 of the FCC rules. Operation of the equipment is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This device must not be co-located or operating in conjunction with any other antenna or transmitter NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. Regulatory information / Disclaimers Installation and use of this Wireless LAN device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government CAUTION: To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use on the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. MPE Statement (Safety Information) Your device contains a low power transmitter. When device is transmitted it sends out Radio Frequency (RF) signal. Safety Information In order to maintain compliance with the FCC RF exposure guidelines, this equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. FCC Part 68 Statement This equipment complies with part 68 of the FCC rules. On the rear panel of this equipment is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for the equipment. If requested, this information must be provided to the telephone company.The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area.This equipment uses the following USOC jack: RJC. An FCC-compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. This equipment cannot be used on telephone company-provided coin services. Connection to Party Line Service is subject to state tariffs.If this equipment causes harm to the telephone network, the telephone company will notify you in advance that the temporary discontinuance of services may be required. If advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a compliant with the FCC if you believe it is necessary.The telephone company may make changes in its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order to maintain uninterrupted service.If the trouble is causing harm to the telephone system, the telephone company may request that you remove the equipment from the network until the problem is resolved.It is recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected. This is to avoid damaging the equipment by loca lightning strikes and other electrical surges.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.0-c321 44.398116, Tue Aug 04 2009 14:24:39 Modify Date : 2011:08:31 22:29:42+08:00 Create Date : 2011:08:31 22:29:42+08:00 Metadata Date : 2011:08:31 22:29:42+08:00 Creator Tool : Microsoft® Office Word 2007 Format : application/pdf Title : PRODUCT SPECIFICATIONS Creator : Cherry Zhang Document ID : uuid:26cf84d5-f24c-4419-8683-0b9ed0c16142 Instance ID : uuid:9bdb08dd-16e6-4e6f-8155-5b3bbb9aa4e4 Producer : Microsoft® Office Word 2007 Page Count : 15 Author : Cherry ZhangEXIF Metadata provided by EXIF.tools