Darfon Electronics HSAD002M Mouse User Manual

Darfon Electronics Corp Mouse Users Manual

Users Manual

Download: Darfon Electronics HSAD002M Mouse User Manual
Mirror Download [FCC.gov]Darfon Electronics HSAD002M Mouse User Manual
Document ID3243887
Application IDaoIboUsxe2RbRW1nqsAYtg==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize41.88kB (523546 bits)
Date Submitted2016-12-30 00:00:00
Date Available2017-06-29 00:00:00
Creation Date2016-12-30 10:42:53
Producing SoftwareMicrosoft® Word 2016
Document Lastmod2016-12-30 10:42:53
Document TitleUsers Manual
Document CreatorMicrosoft® Word 2016
Document Author: ho chiang

(Bluetooth 3.0) Mouse
User Manual
Manufacturer: HP Inc.
Brand: HP,
Model: HSA-D002M
Date:2016-12-01
Product Specification
1.1
Electrical
1.1.1 Transmitter
The transmitter consists of Broadcom solution
(BCM20730), and its related circuit as following.
1.1.1.1 Power Control Requirements:
Put AAA size battery pack into mouse.
Ender user can use the battery switch on the lower
case to control power on or off.
1.1.1.2 RF Link:
Push the pairing button on the lower case to into
pairing mode.
1.1.1.3 Radio Channel:
2.4GHz ISM Band (2.402G~2.480G)
1.1.1.4 Operation Range: only 5M, work on without RF
disturbance environment.
1.1.1.5 Power Supply:
3V power supply, 2 pcs AAA batteries. Rating current:
100mA.
1.1.1.6 Tracking Performance:
Speed :
30 inches/sec
Acceleration: 10g
Resolution: 1300 CPI.
Frame rate: Self-Adjusting by sensor PAW3204DB
1.1.1.7
Surface Performance for MP Testing Criterion
a. White paper of DFS
b. Formica 0909 (black color board)
1.1.1.8 Cut off Voltage
Cut off Voltage: 2.0V
1.1.1.9 Power consumption: (V bat =3V,on white paper)
Status
Power consumption
Moving
Rest 1
Rest 2
Switch Off
Disconnect
<8 (mA)
<1.2 (mA)
<0.8 (mA)
<0.1(mA)
<0.8mA
(not be moved) 0.3 sec
(not be moved) 20 sec
Working -> Rest 1
Rest 1->Rest 2
1.1.1.11 RF IC (BCM20730)
1.Supply voltage (Vcc): +1.4V ~ +3.6VDC
2.Operation Temperature Range: 0°C to +70°C
3.Storage Temperature Range: -40°C to +125°C
Electrical Characteristics:
Item
TX/ RF Parts
Operation Frequency
Supply Voltage
Current consumption
Modulation technique
ISM Band 2.402GHz ~ 2.480GHz
3.3 Vdc
19mA TX at 0 dBm output power
GFSK
Start guide for Mouse(Model HSA-D002M)
1) Insert your AAA x2 to Mouse
3) Turn functional indicator to Green on bottom of product
4) successfully operated
Pairing method: L button + M button + R button + switch on (Timeout after 10 seconds
from entering pairing mode)
FCC Statement:
Federal Communications Commission (FCC) Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1) this device may not cause harmful interference and
2) this device must accept any interference received, including interference that may
cause undesired operation of the device.
FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End users must follow the specific operating instructions
for satisfying RF exposure compliance. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
15.21
You are cautioned that changes or modifications not expressly approved by the part
responsible for compliance could void the user’s authority to operate the equipment
Industry Canada (IC) Statement
Canada, Industry Canada (IC)
This Class B digital apparatus complies with Canadian ICES-003 and RSS-247.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1)this device may not cause interference, and
(2)this device must accept any interference, including interference that may cause undesired
operation of the device.
Canada, avis d'Industry Canada (IC)
Cet appareil numérique de classe B est conforme aux normes canadiennes ICES-003 et RSS-247.
Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer
d'interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui
peuvent affecter son fonctionnement.
Canadian Notice (RF Exposure)
To comply with the Canadian RF exposure compliance requirements, this device and its antenna
must not be co-located or operating in conjunction with any other antenna or transmitter.
Avis Canadien
Pour se conformer aux exigences de conformité RF canadienne l'exposition, cet appareil et son
antenne ne doivent pas être co-localisés ou fonctionnant en conjonction avec une autre antenne ou
transmetteur.
1. CE EMC must comply with EN55022/55032/EN55024 latest std.
2. Operating temperature
-5 degree C ~ 60 degree C
3. Altitude of operation
Up to 3000m
Manufacturer
HP Inc.
Address
1501 Page Mill Road Palo Alto, CA 94304, USA
Country of
Origin
China, USA

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 7
Language                        : zh-TW
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Word 2016
Creator                         : ho chiang
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2016:12:30 10:42:53+08:00
Modify Date                     : 2016:12:30 10:42:53+08:00
Document ID                     : uuid:D659C31D-2783-46AC-A376-096E4C79ACB4
Instance ID                     : uuid:D659C31D-2783-46AC-A376-096E4C79ACB4
Author                          : ho chiang
EXIF Metadata provided by EXIF.tools
FCC ID Filing: O62-HSAD002M

Navigation menu