Datalogic ADC FALCON4220 PDA Scanner With WLAN User Manual PC021 Ver0

Datalogic ADC, Inc. PDA Scanner With WLAN PC021 Ver0

User Manual

FALCON4220 Ver 1.0 10/20/2003 Key Features  Intel Cotulla 400Mhz 32 bits RISC Processor  64/128 MB SDRAM and 64MB Flash ROM  One CF-II and SD expansion slot  Support USB1.1 Client and Host  Bar-Code Engine Build in (Laser/CCD Scanner)  Wireless Communication Ready (802.11b)  Alphanumeric Keyboard Build-in Specifications Processor  Cotulla 400Mhz 32 bits RISC CPU Chipset  Intel Cotulla embedded chipset  Media-Q MQ1188 Graphic, SD and USB host Controller  Wolfson WM9705 AC’97 codec with Touch screen controller Memory  64MB (M-System) Flash ROM  64/128MB SDRAM Display  Support 240 X 320 TFT 256K Color LCD  0.0745mmX3 (H) X0.2235mm (V) dot pitch  Transflective type TFT LCD with back light  Support 4-wire resistance type touch panel Audio  One mono speaker  2.5mm DIA stereo earphone jack with Microphone input. USB Function  Support USB 1.1 Compliant Function  Support USB 1.1 Compliant Host in 100mA  USB interface will support from cradle USB connector or external USB cable Expansion Module  Laser Engine / Long Range CCD / 2D Scanner (Opticon VLM4000/4100, Bitatek CCD, Symbol SE900A/SE800) Infrared Port  One IrDA 1.2 compliant SIR port support 20cm ~ 30cm distance Expansion Slot  One Compact Flash Type-II slot (support 3.3V)  One SD Card slot (support SDIO) Power System  Build in 1800mAh Li-Polymer removable battery (10 operation & 100 standby hours in 64MB DRAM and 64 ROM module)  25 mAh rechargeable backup battery (It will hold the system data at least 2 hours without main battery)  One adapter with 100~240Vac, 50/60Hz  AC input and 5V/2A DC output  One DC-IN jack Button/Key  Power/Front light on/off button  4-way navigation button  2 Scanner Enable Keys  SW Reset input button  System battery (power) switch  16 + 1 alphanumeric keyboard LED  One three-color LED for Alarm notification(R) and charger indicator(G/B)  One two-color LED for scanner indicator Power Management  Support for Xscale application modes including: Turbo Mode, Normal Mode, Idle Mode and Sleep Mode  Peripheral power – On/Off controllable via software RADIO Module  802.11b Dimensions and Weight  78 mm (W) x 168mm(L) x 33mm(H)  Weight: 350g Software  Microsoft WinCE .NET 4.2 (Professional Ver sio n)  IE, Inbox, Async..etc.  SW update from CF Environmental Test  Operating Temperature: -10℃~50℃  Storage Temperature: -20℃~60℃  IP54 Standard (Cradle is not be included)  4 ft (1.2m) drop to concrete Peripherals and Accessories  Hand-Strap  WAN Module  Docking Station Color  Dark-Blue
10/20/2003 FALCON4220 Keypad Layout
Docking Station 10/20/2003 Key Features  PC Communication  Battery Management  USB Host and Client  RS-232  Ethernet Module Ready (optional) Specifications DC Power Jack Input  DC 5V/2A 2nd Battery Status LED  No LED: Fully charged  Amber: Charging  Flashing: Problem USB Client Connector  Connect to PC  Support USB Client only USB Host Connector  Support USB Host  Support USB device (100mA) RS232 D-Sub Connector  Connect to PC  Support RS232 full function Ethernet Module (optional)  Support 10/100 Mb Ethernet communication  Connect through USB host connector 2nd Battery Charge Slot  Support 2nd Battery Charge Size and Weight  130mm(L) x 120mm(W) x 20mm(H)  Weight: TDB Environmental  Operating Temperature: 0℃~50℃  Storage Temperature: -20℃~60℃  75cm drop to concrete Peripherals and Accessories  USB Cable (connect to PC)  RS-232 Cable  Ethernet Module
Standard Packing List 10/20/2003 N.O. Item Notes 1. PC320 Terminal 2. User’s Manual Intercom provide 3. Quick Guide Intercom provide 4. Warranty Card Intercom provide 5. Supplement CD Intercom provide content and art work 6. Standard AC Adaptor 7. Standard Battery Pack 8. AC Power Core (Option) 9. Opened CF Cover 10. Screen Protect Film x 1 (Option) 11. Cable (USB or RS232) (Option) 12. Ear-Phone Set (STEREO) with Microphone
Cradle Packing List 10/20/2003 N.O. Item Notes 1 PC320 Cradle 2 Quick Installation Guide Intercom provide 3 Standard USB Sync Cable (or RS232 Cable) 4 Ethernet Module (Option) 5 Multi-Link Join (Option)
Accessory List 10/20/2003 N.O. Item Notes 1. Stylus Pen (3 in 1) 2. USB Sync Cable for PC320 3. Standard Battery Pack (1800mAh) 4. Ear/Micro-phone 5. RS232 Serial Cable for PC320 6. Hand Strap with Protect Rubber 7. PC320 Cradle 8. USB Sync Cable for Cradle 9. RS232 Serial Cable for Cradle 9Pin 10. USB Ethernet Module for Cradle 10 base-T Future 11. MSR (Magnetic Stripe card Reader) Bita Provide 12. Screen Protect Film (4 in 1) Future Priority Status 0 Default Status 1 After Status 0 Status 2 After Status 1 Status 3 After Status 2 Future: Thinking about it but do nothing about it.
FCC Information to User Information of the responsible party for a DoC product Company Name: PSC SCANNING INC./PSC Scanning, Inc Address: 959 Terry Street Eugene, OR 97402 U.S.A. Contact: MR. JERRY KALINA Telephone: (541)683-5700 Fax: (541)345-7140 Federal Communications Commission (FCC) Requirements, Part 15 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver. ---Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ---Consult the dealer or an experienced radio/TV technician for help. Regulatory information / Disclaimers Installation and use of this PDA must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device, or the substitution of the connecting cables and equipment other than manufacturer specified. It is the responsibility of the user to correct any interference caused by such unauthorized modification, substitution or attachment. Manufacturer and
its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. MPORTANT NOTE (CO-LOCATION) FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. SAR Exposure This device has been tested for compliance with FCC RF Exposure (SAR) limits in typical flat configurations. In order to comply with SAR limits established in the ANSI C95.1 standards, it is recommended when using a PDA that the integrated antenna is positioned more than 1.5cm from your body or nearby persons during extended periods of operation. If the antenna is positioned less than 1.5cm from the user, it is recommended that the user limit the exposure time. CE Declaration of Conformity For the following equipment: PDA !0984 Is herewith confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (89/336/EEC), Low-voltage Directive (73/23/EEC) and the Amendment Directive (93/68/EEC), the procedures given in European Council Directive 99/5/EC and 89/3360EEC. The equipment was passed. The test was performed according to the following European standards: l EN 300 328 V.1.4.1 (2003-04) l EN 301 489-1 V.1.3.1 (2001-09) / EN 301 489-17 V.1.1.1 (2000-09) l EN 301 893 V.1.2.2 (2003-06) l EN 50371: 2002 l EN 60950: 2000

Navigation menu